Custom total/subtotal formula in an ALV Grid and printing.

I have an ALV grid using OOPs method (Class cl_gui_alv_grid). The table that I am displaying is a dynamic table.
call method o_grid->set_table_for_first_display
    exporting
      is_variant      = gx_variant
      i_save          = 'A'
      is_layout       = gs_layout
    changing
      it_fieldcatalog = it_fldcat
      it_outtab       = <gt_tabletotal>.
On one of the columns in the ALV grid, instead of the regular summation, I had to do weighted averages (not avg).
I built a logic to manipulate this total field for that column using field symbols.
CALL METHOD o_grid->get_subtotals
    IMPORTING ep_collect00 = total
              ep_collect01 = subto.
ASSIGN total->* TO <ftotal>.
ASSIGN subto->* TO <fsubto>.
CALL METHOD o_grid->refresh_table_display
   EXPORTING I_SOFT_REFRESH = '1' .
I manipulated <ftotal>-mycustomformulafield field there using some logic.
In my field catalog i have the above field with wa_it_fldcat-do_sum = 'X ' .
Now, II am able to see my custom formula on the screen. But when I print the grid using the print button or when I export to an excel sheet(I use export to local file and then select excel there) , my custom formula that i calculated above is reset to 0.000 .
(Also when I email the grid, my custom formula is wiped). How can I avoid this ? Any useful suggestion is well appreciated.

Hi, Shareen,
We have the same problema here.
Could you solve it?
Thanks in advance

Similar Messages

Display totals on the first line in ALV grid and ALV LIST

Generally we wll display totals at the end..
bu the requirement is to display it in the first line of the column.
how to display the totals in the first line?
I have used ALV GRID and ALV LIST (choice) using function modules.
Plz help me
.for example : Po qty : Should display total po qty on the first line of the Po line item.

IN LAYOUT
ILAYOUT-totals_before_items = 'X'.
REGARDS
SHIBA DUTTA

ALV GRID and Integrated ITS 7 (SAP GUI for HTML) - dissapears on reload

Hi All,
We have a custom report that uses an ALV grid to display information to the user. Within this grid, there are fields that are display only and fields that are editable. Also, the grid is wider than the screen's width. It works fine in ECC. It also worked fine when we were using ITS 6.4.
We have recently upgraded to ITS 7. Now when we run the report using a Transaction iView (in EP 7) or the Webgui service (SAP GUI for HTML), if a field that is editable has focus when an event is triggered that reloads the grid, the screen becomes blank. So, you can click the Save button and the screen goes blank, also, there are date fields in the grid and if you choose a new date, the grid reloads and the screen becomes blank.
We have found that when the screen is blank, you can use the "Page Up" button on your keyboard and the last few columns of the grid will appear. As if the entire grid has moved off-screen to the left.
If you click onto a non-editable field and refresh or save, the grid returns to its normal state.
We are on Basis Patch level 15.
Does anyone have any ideas on how to fix this?
Also, does anyone know of a standard SAP transaction we can call from the Webgui that would have a similar setup...with an ALV grid containing editable and non-editable fields? We would like to rule out any errors in the report itself. Since it worked before we upgraded and it works fine in ECC. This would be a really big help too.
Thank you so much!
-Kevin

Hi,
Thanks Raymond, I have seen Note 314568. I could not get the second link to work but I have looked at just about every Note in reference to Integrated ITS 7 and Tables or ALV Grids and there are very many, so it would appear that SAP has had a hard time with implementing this control, but I have not seen any instance that matches the problem we are having.
Unfortunately, SAP will not investigate this unless we can provide a standard Transaction that exhibits the same behavior.
If anyone knows of a standard SAP Transaction that displays an ALV Grid that is wider than the screen (requiring a horizontal scroll bar) and with editable and non-editable fields, that would be fantastic. If we can test against that, then we would know for sure if this is a problem with ITS / SAP GUI for HTML, or if there is an issue with this specific report.
Thanks!
-Kevin

ALV Grid and LIST?

HI all,
Diff between ALV GRID and ALV LIST?
sachin.

Hi,
ckeck these differences.
first one is for list display and second one is for grid display.
For all practical purposes, they are the same.
2. Some differences:
a) from abap coding point of view,
alv list is done with Function modules,
alv gris can also be done with FM,
but can also be done using OO concepts.
b) Alv grid (using oo concept) requires
designing the screen layout .
Hence, in one screen, we can show more
then one alv grid
(we cannot show more than
one alv list on one screen)
c) ALV grid uses ActiveX controls
present on the Presentation Server.
Hence, it consumes More Memory
on the presentation server.
d) ALV LIST is Display Only.
Whereas
ALV Grid Can Be made EDITABLE for entry purpose.
e) In alv grid, these options are possible,
but not in alv list.
without horizontal lines
without vertical lines
without cell merging during sorts
display total lines above the entries
ALV LIST Can be coded using only FMs
ALV GRID Can be coded using FMs and object oriented concepts
ALV LIST Can be displayed hieraicharlly
ALV GRID cannot be displayed hierarichally.
reward points if hlpful.

ALV Grid and return to selection screen

Hello
I have an ALV Grid and when I push a buttom that I program appears another ALV Grid. In this second ALV I try to program different buttoms. When I program the BACK buttom I want to go to selection screen.
I try with CALL SELECTION SCREEN but when I stay in selection screen and push the execute buttom the ALV that I see is the second, not the first. It seems that we don't catch the news selections.
I put rs_selfied-refresh = 'X' after the CALL SELECTION SCREEN but is wrong again.
What can I do????

Hello Silvia
There is a simple trick to return from the second ALV list directly back to the selection screen:
*& Report ZUS_SDN_REUSE_ALV_GRID_DISPLAY
REPORT zus_sdn_reuse_alv_grid_display.
TYPE-POOLS: slis.
DATA:
gt_t001        TYPE STANDARD TABLE OF t001,
gt_knb1        TYPE STANDARD TABLE OF knb1.
DATA:
gs_fcat        TYPE slis_fieldcat_alv,
gt_fcat_t001   TYPE slis_t_fieldcat_alv,
gt_fcat_knb1   TYPE slis_t_fieldcat_alv.
PARAMETERS:
p_bukrs        TYPE bukrs DEFAULT '1000'.
START-OF-SELECTION.
SELECT * FROM t001 INTO TABLE gt_t001.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
*     I_PROGRAM_NAME               =
*     I_INTERNAL_TABNAME           =
      i_structure_name             = 'T001'
*     I_CLIENT_NEVER_DISPLAY       = 'X'
*     I_INCLNAME                   =
*     I_BYPASSING_BUFFER           =
*     I_BUFFER_ACTIVE              =
    CHANGING
      ct_fieldcat                  = gt_fcat_t001
    EXCEPTIONS
      inconsistent_interface       = 1
      program_error                = 2
      OTHERS                       = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
*     I_INTERFACE_CHECK                 = ' '
*     I_BYPASSING_BUFFER                = ' '
*     I_BUFFER_ACTIVE                   = ' '
      i_callback_program                = syst-cprog
      i_callback_pf_status_set          = 'ALV_SET_PF_STATUS'
      i_callback_user_command           = 'ALV_USER_COMMAND'
*     I_CALLBACK_TOP_OF_PAGE            = ' '
*     I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
*     I_CALLBACK_HTML_END_OF_LIST       = ' '
*     I_STRUCTURE_NAME                  = ' '
*     I_BACKGROUND_ID                   = ' '
*     I_GRID_TITLE                      =
*     I_GRID_SETTINGS                   =
*     IS_LAYOUT                         =
      it_fieldcat                       = gt_fcat_t001
*   IMPORTING
*     E_EXIT_CAUSED_BY_CALLER           =
*     ES_EXIT_CAUSED_BY_USER            =
    TABLES
      t_outtab                          = gt_t001
*   EXCEPTIONS
*     PROGRAM_ERROR                     = 1
*     OTHERS                            = 2
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
END-OF-SELECTION.
*&      Form set_pf_status
*       text
*      -->RT_EXTAB   text
FORM alv_set_pf_status USING rt_extab TYPE slis_t_extab.
* NOTE: identical to STANDARD_FULLSCREEN with additional button
*       for detail list ('DETAILLIST')
SET PF-STATUS 'STANDARD_FULLSCREEN'.
ENDFORM.                    "set_pf_status
*&      Form alv_user_command
*       text
*      -->R_UCOMM    text
*      -->RS_SELFIELDtext
FORM alv_user_command USING r_ucomm LIKE sy-ucomm
                         rs_selfield TYPE slis_selfield.
CASE r_ucomm.
*   Display detail list: all customers for selected company code
    WHEN 'DETAILLIST'.
      IF ( rs_selfield-fieldname = 'BUKRS' ).
        SELECT        * FROM knb1 INTO TABLE gt_knb1
               WHERE bukrs = rs_selfield-value.
        CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
          EXPORTING
*         I_INTERFACE_CHECK                 = ' '
*         I_BYPASSING_BUFFER                = ' '
*         I_BUFFER_ACTIVE                   = ' '
            i_callback_program                = syst-cprog
            i_callback_pf_status_set          = 'ALV_SET_PF_STATUS'
            i_callback_user_command           = 'ALV_USER_COMMAND'
*         I_CALLBACK_TOP_OF_PAGE            = ' '
*         I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
*         I_CALLBACK_HTML_END_OF_LIST       = ' '
            i_structure_name                  = 'KNB1'
*       IMPORTING
*         E_EXIT_CAUSED_BY_CALLER           =
*         ES_EXIT_CAUSED_BY_USER            =
          TABLES
            t_outtab                          = gt_knb1
          EXCEPTIONS
            program_error                     = 1
            OTHERS                            = 2.
        IF sy-subrc <> 0.
*     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
<b>*       NOTE: when the program logic returns from the 2nd ALV list
*             and exit = 'X' then the program leaves the
*       1st ALV list, too, and returns to the selection screen.</b>
        rs_selfield-exit = 'X'.
      ENDIF.
    WHEN OTHERS.
ENDCASE.
ENDFORM.                    "alv_user_command
Regards
Uwe

Help me in alv grid and form printing

hi experts,
my requirement is
i have a check box in the selection screen for batch processing.
if i tick the check box, the data which is in the t_output table should be displayed in alv grid and
in turn if i select one row in alv o/p and double click on it the entire data shold be displayed in the form.
if 2 rows are selected in alv and double clicked on it then data in the two rows is dispalyed in the form.
points are rewarded .
thanks in advance.

Hi,
Check the following link:
http://sapdev.co.uk/reporting/alv/alvgrid_rowsel.htm
Regards,
bhaskar

ALV REPORT: read selected checkbox in alv grid and process the pushbutton

my requirement is to check some rows from alv grid and the press the pushbutton. Thereby following things should process:
select all checked rows into an itab and call the transaction code CJ01 for all
entries......
I am finding the problem that when I select the checkbox....the internal table doesnt recognize the boxes as checked ones......
thanks in advance...
Kartikey Singh,

Data: ref1 type ref to cl_gui_alv_grid.
      CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
        IMPORTING
          E_GRID = ref1.
      call method ref1->check_changed_data.
      loop at t_output where Flag = 'X'.
        if t_output-VKUEGRU is initial.
          message e000 with text-110.
        endif.
endloop.

Report with two ALV grids and a header

Hi experts,
I have a report with two ALV grids in the same screen, each one in a separated container. The information displays it correctly. The report has been implemented by using OO Programming.
My real trouble is in the header. It must have a logo, a title with a specific font and other information.
I'll attach a capture of my need:
[Report with two ALV grids and a header|http://picasaweb.google.com/lh/photo/AcQD49QPmm-0L_jL2iMedA?feat=directlink]
Then, I want to set up the header you can see, with logo, a font with specific features. Obviously, the header you see has taken from another report. But is the same idea.
I've tried with a third container, using the CL_GUI_CONTAINER and CL_GUI_CONTAINER classes, but it doesn't work.
Any idea? Would welcome any help you can provide.
Thanks in advance,
Jorge Rojas

Hi, Jorge.
Should the header be a"attached" to any of the ALV? Or it should be carried alone?
If first applies, you've given the solution yourself: put the info & logo in first ALV's header and invoke it from the proper method.
You could use CL_GUI_DOCKING_CONTAINER CLASS to divide screen in several containers and then, in the upper one, I would create another one docking container to divide the screen into two: the written info could be performed with an HTML viewer class and the logo with a CL_GUI_PICTURE element.
Cheers.

ALV-Grid and update dynpro fields

Hi!
I've created a dynpro with an ALV-Grid for Data-Overview and fields on the dynpro to change additional data.
My ALV has one editable column, when this value change I calculate other value for a field dynrpo, but I canu2019t see this change in my field dynpro.
How can I update my data filed dynpro when changing the selected row at the ALV.
I use the method handle_data_changed to obtain changes in ALV-Grid and it works fine, but I canu2019t update my fileds on the dynpro, when changing value in ALV.
Thanks for any hints!
Lili.

This error occurs becuase when you change anything on the ALV, control is not triggering the PAI and PBO of your dynpro. Hence your values are not getting updated in the dynpro field.
You should call the CL_GUI_CFW=>DISPATCH in PAI module to trigger the PAI also after the event has been triggered in the ALV.
CALL METHOD CL_GUI_CFW=>DISPATCH
    importing return_code = return_code.
* a control event occured => exit PAI
if return_code <> cl_gui_cfw=>rc_noevent.
    clear g_ok_code.
    exit.
endif.
Regards,
Naimesh Patel

ALV Grid and ALV List difference?

Hello,
Can you help me differentiate ALV List and ALV grid and the low-level definition or context of each?
Also, can you give me a transaction code that outputs an ALV list as well as a tcode for ALV grid?
Thanks,
Jennah

Hi Kirtish,
Thanks but I havent done any function module stuff as I am not an ABAPer but anyway can you guide me through thios?
"I hope this might slove your query. For more please refer to documentation on ALV and also implement the ALV LIST and GRID reports. By using class Class CL_GUI_ALV_GRID, Function module REUSE_ALV_LIST_DISPLAY , REUSE_ALV_GRID_DISPLAY and some more functions like that only."
I will give you some tcode can you please try tcode FBL1n? then execute the report. What is the output is it an ALV list?
I wish to see an ALV list also an ALV grid to see difference.
Tjhakns,
Jennah

ALV Grid and Icon : Printing Problem

Hi, i develop some reports using ALV Grid and Icon and i'm facing printing problem, all report that using ALV grid with the option icon = 'X' cannot print properly, all the character field showing improper icon instead of the text. While all the ALV grid report with the option icon = ' ' can print normally.
Thanks.

Hi,
Check the Demo Program <b>BCALV_DEMO_TOOLTIP</b>, Here i am able to see the Output Properly, and also able to Print them.
Regards
vijay

Alv Grid and Table Control

What is the difference between Alv Grid and Table Control?Explain in detail..

Table control is a screen table to display table data in a screen. You can add table control to a screen in the Screen Painter. The typical flow-logic to process table control is:
LOOP AT <internal table> CURSOR <scroll-var>
[WITH CONTROL <table-control> ]
[FROM <line1> ] [TO <line2> ].
...<actions>...
ENDLOOP.
ALV Grid is a SAP Technology to display a set of data on the output screen. For example if you have selected some SAP tables and processed these data in a way you want to display, then you can pass the internal table to the ALV Grid and it will be displayed on the result screen as ALV Grid. See example in SE16 result.

Subtotal Text in ALV Grid and hiding empty row

Hello,
ive got a ALV-Grid with a few fields .. Total on one field subtotal on VKORG, category or some other fields .
after subtotal of one of the 2 named fields i'm reading the literal to the given fields and writing them in the table which is displayed and do a refresh.
i can show the field literal in the alv by adding it into the field cat but than its displayed even if its not filled.
i just want to display that column after filling it - the subtotal of the 2 columns.
and i want to add the text of the literal to the subtotal line. so if the alv grid is closed to display the totals. i want to see what the subtotal is for.
for displaying i use
CALL METHOD lcl_alv_grid->set_table_for_first_display
      EXPORTING
        is_layout            = gs_layout
        is_variant           = gs_variant
        it_toolbar_excluding = gt_exclude
        i_save               = x_save
        i_default            = 'X'
      CHANGING
        it_outtab            = it_alvlist[]
        it_fieldcatalog      = gt_field_cat.
for refresh
    lv_lvc_s_stbl-row = 'X'.
    lv_lvc_s_stbl-col = 'X'.
    lv_soft_refresh = 'X'.
    CALL METHOD lcl_alv_grid->refresh_table_display
      EXPORTING
        is_stable      = lv_lvc_s_stbl
        i_soft_refresh = lv_soft_refresh
      EXCEPTIONS
        finished       = 1
        OTHERS         = 2.
get the selected column to read literal
CALL METHOD lcl_alv_grid->get_selected_columns
    IMPORTING
      et_index_columns = it_col_tab
    EXCEPTIONS
      OTHERS           = 1.
Hope you can help me and understand my problem

Hi,
Use the No_out from Reusable types of fieldcat..For example.
IF it_final-field is initial.
        READ TABLE IT_FIELDCAT5 WITH KEY FIELDNAME = 'BCD'.
        IF SY-SUBRC EQ 0.
          IT_FIELDCAT5-NO_OUT = 'X'.
          MODIFY IT_FIELDCAT5 INDEX SY-TABIX TRANSPORTING NO_OUT.
        ENDIF.
else.
        READ TABLE IT_FIELDCAT5 WITH KEY FIELDNAME = 'BCD'.
        IF SY-SUBRC EQ 0.
          IT_FIELDCAT5-NO_OUT = ' '.
          MODIFY IT_FIELDCAT5 INDEX SY-TABIX TRANSPORTING NO_OUT.
        ENDIF.
ENDIf.
Cheers,
Syed Maheboob.

Custom F4 for a field in ALV GRID

I am want to provide a custom f4 fro a field in alv gird
similiar to the functionality of process on value request
on a normal screen

Hi Kaushik
You can find some information at page 37 of the document:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/an easy reference for alv grid control.pdf
*--Serdar

Adding custom fields to notifications-approval tab alv grid

Transaction IW21 - Create PM Notifications.
on the Approval Tab - there is an ALV grid that contains lots of fields. I know that i can click on the upper right hand corner and modifiy the layout by hidding fields. I want to add some custom fields to this grid.
I added my fields to view QMSM and now when I look at the database table using SE16 - i can see my new fields.
But how do I add them to this ALV grid?
Please and Thank you,
Julia Ramos
Orange County Public Schools.

I have read SAP OSS NOTE: 586523 Customer-defined fields in list editing. This note helped me add these same fields to many of the standard reporting transactions. IQS8, IW28, IW29, IW38, IW39
I added my fields to
QMEL - Quality Notification
RIHQMEL_LIST - Display structure reporting for QMEL
RQMQMEL - Quality notification - header data
RQMQMSM - Quality notification - measures (reporting)
Then i ran SAP program BALVBUFDEL. This program refreshs the alv buffer. This was very cool in that it allows us to access and report on all of my custom fields thru the standard reporting transactions!
I thought this same logic might work for transaction IW21. I found the structure used by the approval tab alv program, QMSM, and created an append structure, ZAQMSM with my fields - ran the balvbufdel program to refresh the alv buffers - but i still can not see my fields in the approval tab. I believe that there must be a way to do this - i will keep trying different things and read thru move OSS notes. If you have any sugestions or ideas - they would be greatly appreciated.
Thanks

Custom total/subtotal formula in an ALV Grid and printing.

Similar Messages

Maybe you are looking for