Custom transaction link in EP screen for buyer

Hi all,
We are on SRM 5.0 Sp12.
Our users use EP as the fornt end.Now we have a custom transction for a custom report created in SRM and would have the link to it in EP screens for PUCRAHSER role.Can snybody suggest if this is possible?If so,how??
I knw its possible to put the custom link if we log in thorugh the BBPSTART url in IE.But i need to know what are the options if we need to have this link in EP?
Thanks.

Hi jay,
Can you please exaplin the steps to create an iview and embed them in a SRM role.

Similar Messages

Exit to a custom transaction from VL02N (initial screen)

Hi,
In the typical SAP change screen like deliveries in VL02N, is there a way to add an option in the above Menus that would take the user to another Z program/screen? The primary input to the screen will be delivery number so I was curious to know if it could be accessed from the delivery change screen.
This would be an option for the user. Basically, when they created a delivery that cannot go the normal route, the user will enter the info manually.
Thanks
Rakesh

Hi Narendra,
Sorry for the late reply but i was away for sometime. I tried your suggestion but could not find any suitable screen exit. Could you please give me the exit name in case i missed it.
Thanks.
Rakesh

How to create a link on billerdirect screen for downloading bill in PDF

Hi,
Our requirement is to create a link on UCES Biller Direct screen, where user can click and down load his bill or invoice in PDF format.
If any one can help me on this I will be highly thankful to him.
Regrds,
Ranadev

Hi,
Our requirement is to create a link on UCES Biller Direct screen, where user can click and down load his bill or invoice in PDF format.
If any one can help me on this I will be highly thankful to him.
Regrds,
Ranadev

Add custom field in the selection screen for shopping cart monitor report

Hello,
refering to the notes 458591 an 672960, in order to add custom field at item level, we get the structure INCL_EEW_PD_ITEM_CSF.
But this doesnt make it appear on the "Shopping Cart Monitor Report" selection screen.
So should I try adding it in the existing interface of the badi bbp_sc_mon ?

hello Yann,
ok I will implement that. Is it possible to change the interface of the badi method to include more data if we want to check the role of the user who is executing the shopping cart monitor report and accordingly do the settings of field display ? Or calling a function module inside the method to get the attributes of sy-uname would be easier?
rita

Creation of custom Transaction for confirm goods in SRM

Hi Experts
i need to create a custom transaction same as standard one for confirm goods/servics in SRM portal.
In sap GUI, the transaction is BBPCF03
Can you please suggest any good sources where i can learn to Custome Tcodes for my requirement
Thanks in advance
Edited by: kittu reddy on Nov 19, 2008 7:27 AM

Hi Hussaini,
Here are the steps.
1> Customization needs to be completed in SPRO. Logistics Execution -> Mobile Data entry section. Also compare entries with LM01 for understanding.
2> In the 'Define menu management', you can create dynamic menus. For Menu or transaction type, if you enter "1", a menu appears; if you enter "2", a transaction appears. Custom transactions can be created and assigned here.
Once that is done, when you execute LM01 you will see your custom transactions come up. Make sure that these are created keeping in mind the RF device screen size and limitations.
Regards,
Anand.

Maintain Screen for Object Link - New Object

Hi
We want to create new object link ( not standard SAP) in our company.
I try to add new screen for link other SAP object : SE80 ---> Package : CV --->
Function Group : CV130 , add new screen . It seems as REPAIR , Ask me for access key .
Is it OK?
Help Activities:
f the screen entry contains errors or you want to add a new entry you
an check the existing screen sas follows:
   Start a second mode and execute the following steps:
   -   Start the Object Navigator.
   -   Display the objects for development class CV
   -   Expand the function group 130
       The structure notes screens lists all screens that can be used
       for an object link
   -   Find the screen for the object link (such as 1201 for material
       link).
   Process the activity Maintain screen for object link in the first
   mode.
   -   Correct the entry or add an entry for the the object you want to
       add to the document link.
Thanks, Meira.

Hi Dave,
First of all you didn't mention which version you are using and Which Real Estate you are on. there are 2 RE
1. Classic Real Estate (Real Estate)
2. Flexible Real Estate Management
Now coming to Question
for Flexible Real Estate Mangement the path is
SPRO---->Flexible Real Estate Mangement (RE-FLX) -
>General Setting for Master and contract -
>
Document Mangement -
>Document Mangement System -
>Maintain Screen for Object Link
The above path is for ECC 6.0
Thanks
Veman.

Custom Data Link is Lost on Saving the InCopy Document

Hi,
I am creating a custom data link in InCopy CS3 for the story. I am able to successfully create the custom data link in InCopy.
But when I save the InCopy document and re-open it then custom data link is gone and I have the normal data link.
InCopy default behaviour is that when we save the InCopy document then it creates a normal data link.
Does anybody have an idea what should be done to retain the custom data link and normal data link is not created.
Thanks in Advance.
Regards,
Eric Won

Thanks Dirk.
Yes, I saw that there was some problem with the Script Provider.
I created a new sample project in InCopy and created the custom data links. The custom data link got persisted in incx file which can be viewed by opening it in text editor. I am creating custom data link for stories.
But when I open the InCopy document then my Script Provider gets the call back for creating the links. I created the links as shown in Custom Data Links sample but it doesn't create the link. Instead when I open the document normal data link exists for the story in InCopy.
It seems to be that incx file is getting created correctly becuase when I try to import the incx file in InDesign then it is able to successfully create the custom data links.
Am I missing something or doing something wrong ? any ideas ?
I once gain thank you dirk for helping me out.
Regards,
Eric Won

Initial screen for the Queries component

Hi all,
which transaction show the initial screen for the Queries component ??
Thanks,

Hi Deepu,
I saw in the SAP document in directory:
Queries->Selecting Queries for Processing,
a graphic shows the initial screen for the Queries component. but wasn't mentioned how we can get this graphic.
The directory title is:
"Query from user group:initial screen"
Do you know which transaction it is ?
Thanks,

Custom Transaction using RSDMD to go to MD Screen Directly

Hi,
I have created a custom transaction for Master Data Maint. which uses RSDMD and the InfoObject name.
By using this custom transaction I can reach to
the screen to filter the records. Here I click on
execute (F8) to reach the actual data.
I used SHD0 to create this custom-transaction.
How do I include the "execute / F8" functionality in my custom transaction, so that when I use custom-transaction I can go directly to the data.
Would appreciate your help.
Thank you,
Pramod.

Hi Mark,
Your design of going for Name01, Age01 , Date01.....
is absolutely correct. Stdandard SAP even does the same thing.
Regarding the dump...you can do one thing..try referring
standard infotypes which uses table control like Basic pay infotype 0008.
If you get any help from there then its fine..or just post send the dump analysis (point 3 of dump) to forum i guess from that definitely we can conclude at the reason for dump...
Enjoy SAP.
Pankaj

Creation Of Custom Transaction For RF enabled devices "mobile data entry"

Hello Everyone,
i need some information, or some material or some example's for creating custom transactions that will invoke the standard good issue transaction of sap from the handled device using the RF , so can anybody give some reference which will help me in creating custom transaction for a RF enabled handled device, which will invoke the standard sap goods issue transaction( mb1a) ,, there are some LM-transaction which do goods issue from the RF enabled handled device, but in my case i want to do goods issue using reservation as my input, so can anybody guide me or send some reference material matching to my problem, i would really appreciate it..
thanks in advance...
sapient2006

Hi Hussaini,
Here are the steps.
1> Customization needs to be completed in SPRO. Logistics Execution -> Mobile Data entry section. Also compare entries with LM01 for understanding.
2> In the 'Define menu management', you can create dynamic menus. For Menu or transaction type, if you enter "1", a menu appears; if you enter "2", a transaction appears. Custom transactions can be created and assigned here.
Once that is done, when you execute LM01 you will see your custom transactions come up. Make sure that these are created keeping in mind the RF device screen size and limitations.
Regards,
Anand.

How to start creating a new component for custom transaction in IWEB client

Hello Experts,
I am new to CRM 2007 CRM web client programming.
I have a custom SAP GUI transaction in CRM and user wants to convert it into ICWEB transaction.
its using all custom tables and in all screens,
Please guide me how do I proceed in creating the component,display fields on the view....
I mean how to create the fields in the View, Do I need to write BSP code or Wizard helps me to generate and configure the fields on the view.
Please also let me know procedures create context notes which replicate the database tables which the data is saving or updating.
I am not clear cut info to proceed,
Please help me in this regards
thanks in Advance
Edited by: Madhavi Angi on Apr 23, 2009 2:57 PM

Hi Keith,
<<This particular rule is a sample one I set up that requires the existence of C:\IT\test.txt. But I don't see the actual text of that rule anywhere in the XML:>>
In your XML, if you see these lines:
<Expression>
<Operator>NotEquals</Operator>
<Operands>
<SettingReference AuthoringScopeId="ScopeId_811CF9C7-F08C-4528-8C02-E20811B33FD5" LogicalName="OperatingSystem_5c61496b-b4dc-4ca9-a3f7-30c3aec8e2a4" Version="1" DataType="Int64" SettingLogicalName="File_cccd7dc7-e590-494c-b166-6d4aea7abc57" SettingSourceType="File" Method="Count" Changeable="false" />
<ConstantValue Value="0" DataType="Int64" />
</Operands>
</Expression>
It has setting reference with GUID with Method="Count" means this is existential rule referenced to setting blah blah... (If method="Value" means that it has value rule defined) and for existential rule,
XML has "NotEquals" operator and value is "0" which means that if file not equals to zero means file exist (compliant).
Hope this helps.
This posting is provided "AS IS", provides no warranties, and confers no rights. -Praveen S.

FB02 - Field KIDNO not on screen for credit doc (customer) / debit (vendor)

Hello,
I am trying to manually change field BDEG-KIDNO on transaction FB02.
I used custumization to make this field changeble when:
. Line item not cleared
. No invoice-related credit memo
I do not have the "Customer Debit or Vendor Credit" checked since I intended to change both debit and credit documents for customers and vendors.
When I used transaction FB02 to change this field I have no problems with debit documents on customers and credit documents on vendors but I cannot change it since the field BSEG-KIDNO does not appear on screen.
Is there any customization for whether field BSEG-KIDNO appears on screen for credit documents for customers and debit documents for vendors?
Any help will be appreciated.
Thank you
Elisabete

Hello,
The field I want to change is BSEG_KIDNO not BKPF-XBLNR.
This field (payment reference) appears on the line item if customer debit document and vendor credit document but not if customer credit document and vendor debit document.
Thanks,
Elisabete

Attaching the documents to customer transaction screen

Hello Experts,
Greeting of the day!!
One of my client wants to attached a scan document of received transaction in a Customer transaction screen, Now i m confuse whether this is possible in oracle Applications R12.1.3 or not?
If yes then please guide me or give any reference??
Oracle Application : R12.1.3
Database : Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
Thanks,
Atul

Hi Helios,
I found the solution on oracle application screen itself.
Oracle Apps already provided the attachement future in the application itself.
VIEW ----> ATTACHEMENTS.. here we can attach a any type of document for customer transaction or supplier invoice.
Thanks,
Atul Ramteke

Different last screen for transaction VA03 in ecc6.0 and 4.6 c

The last screen for transaction in ECC 6.0 is Change status while it is Display Status in 4.6 c. SWo, can you please let me know about it?

Hi Mithun Dha,
I have the same behaviour in my System. The scenario is Upgrade from 4,6c to ECC 6.0 and my tables are MSEG and AUFM. These tables with indexes.
The Basis are Running a Updating Statistics for a Single Table, with Tx DB20 In this moment,the process are running and i am waiting the result.
A question: What are your version of data base ?? I´m using Oracle 10G.
look the detail information in this link:
(http://help.sap.com/saphelp_nw04/helpdata/en/df/455e97747111d6b25100508b6b8a93/frameset.htm).
If someone have more information, please help us to solve our problem.
Regards,
Rodrigo Ramirez.

Send portfolio how to customize adobe welcome screen for shared porfolio. (Opening the link forces the recipient to a downright ugly irrelevant and dead advertisement rather a related cover page)

send portfolio- how to customize adobe welcome screen for shared porfolio ?(Opening the link forces the recipient to a downright ugly irrelevant and dead advertisement (appropriately titled "branding logo.png) rather a related cover page)

Hi nedler1,
Please try the following steps to display the cover sheet and replace it with custom one:
How to change a portfolio’s initial view setting to show the cover sheet (and hide the contents):
Open a PDF portfolio and run the following JS in the console:
this.collection.initialView = 'Hidden';
Save the portfolio, close and re-open.
The cover sheet will now be displayed when opening the portfolio.
Updating the cover sheet
Also, most likely if you want the coversheet displayed when opening the portfolio, and do not want the default cover sheet:
Here are the steps to replace the default cover sheet:
Open the Portfolio.
Perform a View > Portfolio > cover sheet to open the cover sheet.
Open the Pages panel for the cover sheet.
Right click on the cover sheet page in the pages panel, select “Replace Pages”.
Replace the cover sheet page with the desired cover from a page in another pdf.
Save the portfolio.
Regards,
Rave

Custom transaction link in EP screen for buyer

Similar Messages

Maybe you are looking for