Custom validation Messages printed more than once :-(

Hi,
I have added a Custom Validator to a drop down list box (h:selectOneMenu) and for a text field. and i bound these form elements to the corresponding UIComponent Object in the becking bean. The backing bean is in session scope I have a link which will forward to a different page and i disabled the validation on this link by setting immediate as true.
But when the user clicks the command link goes second page and then comes back to the first page and click the submit button, the validation error occurs. But to my surprise i am getting the same Validation error message printed twice or thrice (as when we are going to the second page and then comes back and submits).
If I am correct the Validator corresponding to the component keeps the old error state and then add the new error state.
I tried to remove one FacesMessage object which i got from Iterator of FacesContext.getMessages() and then tried. but hence also i was getting the same result.
When i looked at the log, i foud my validator class being invoked twoce (or thrice depending upon the no. of times i went to the secoond page).
Can you please help me out from this problem?
Thanking you,
Sudheesh

If it is indeed 1.1, I'd recommend trying 1.1_02 [1] and trying again.
[1] https://javaserverfaces.dev.java.net/servlets/ProjectDocumentList?folderID=5225&expandFolder=5225&folderID=5220

Similar Messages

  • Can't Print more than once without restarting MBP using gutenprint

    Hi I am using gutenprint 5.2.6 for my HP laserjet 5P. I can print a document once but when i try to print another document, it does not print +(it shows up in the print query but does not get sent to the printer) . I have to restart my MBP to print something else. even if i try to pront the same document twice, it only prints once. Anyone know how to fix this problem?
    thanks,
    Push

    make sure you have the latest drivers
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us &prodNameId=15011&prodTypeId=18972&prodSeriesId=25481&swLang=8&taskId=135&swEnvO ID=4082

  • Custom Events and Scheduling more than once

    Hi,
    in BO 4.1, I successfully triggered WebI Report instance generation by a "Custom Event" through scheduling.
    Now, we have the requirement that the report should not be triggered only once but always when the event is triggered.
    At first glance, this looks tricky bc. in order that the report "reacts" to the event, the report itself must be scheduled with the event (it gets an instance "pending" that "wait + reacts" to the event). So it looks like we need schedule the report always manually with "event" before it is ready to react to the event specified in the scheduling.
    Is there any user-friendly trick to make the report react upon every fired event without having to "schedule" the report manually with the event?
    (Similar to schedule daily, just that the event is the trigger, note a daytime...)
    Best Regards

    Hi Florian,
    What is the frequency set under Recurrence option for the report instance?
    Can you give an idea like after how much time the event can be triggered?
    For example, if you are expecting the event to change in an hour, you can schedule the recurrence as hourly or you can specify something like 0 hours and 15 minutes or something like that.
    In that case, once the event is fired, your report instance will be ready to trigger after 15 minutes for the next run.
    Would suggest you to sync with the BO administrator as concurrent triggering of large number of instances can give load on Job Servers.
    Hope it will help in some way.
    Regards,
    Yuvraj

  • Can't  print more than once with my epson epl-5800L  and airport express

    I recently bought an airport express (b/g) in order to use it with my epson usb printer epson epl-5800L. I'm running mac os X leopard 10.5.7 on my macbook pro (2.4 ghz). The printer is plugged into the airport express (firmware 6.3).
    My problem is the following : i can only print one job (one document), after that if i want to print a second document, the printer don't accept the print job...and the print status windows shows the following message "Unable to open device (read failure)!". The only solution to get it printing again is to reset the Airport.
    I downloaded and reinstalled the last 10.5 driver from epson site, this didn't result in any success, the problem remain, it's even worse now the application office word quit unexpectedly if i try to print through airport express. The error message say "The application escpageASTool quit unexpectedly".
    The problem seems only related to airport express via Bonjour protocol, because if i connect the printer directly to the usb port of my macbook pro i can print without troubles. Also, as reported from many forums Tiger 10.4 seems not concerned by this problem.
    Any help would be much appreciated!
    Thanks,

    I found this statement - +"Note: AirPort Base Station and Time Capsule printer sharing is for printing only, not for printer utilities or other special features that may require a direct proprietary connection."+ within http://support.apple.com/kb/TS1253. Not sure if it pertains exactly to your issue.

  • Billing Invoice if Printed more tha once, then it should have copy text

    Hi,
    Billing Invoice is created in SmartForms.  Requirement is if it is printed more than once, then it should have text "Copy of ...." in the smartform.  Please suggest how it can be configured.  Thanks.
    Munna.

    Hi Munna,
    This can be done by the help of ABAP code. He will help you out to print the smart form as a copy after first print.
    For every Second copy the NAST table will have another Output and the Original OUTPUT status will be 1 ( processed)
    Check this from the NAST table for your Application and the OUTPUT combination.
    If the VSTAT is 1 then you can considere the remaining copies will be duplicate.
    In the SMARTFORM put a logic as
    REPEAT = X
    which will check the NAST tables for the repeated outputs and will print the DUPLICATE text.
    Cheers
    Chris

  • How do I print more than one custom-size photo on a page in PSE 10?

    I recently upgraded from Photoshop Elements 6 to Photoshop Elements 10.  I make greeting cards, and on PSE 6 I was able to print two custom-size (6-1/2” x 5”) cards on each 8-1/2” x 11” sheet of photo paper.  The option to print more than one custom-size card on a single sheet of paper is not available in PSE 10.  I want to know how I can print more than one custom-size card (or photo) on a page in PSE 10?

    In Editor:
    File>Print>#4 Select type of print>picture package

  • Custom Administrative Template Error 53 Key name specified more than once

    Hi All,
    Hope I've picked the correct forum. I am making my first foray into setting up a custom administrative template for some software that is developed in house. The current deployment method is to merge a reg file on each computer that requires the registry
    settings. I am trying to set this up so that it is controlled via GPO.
    My idea is that in the a GP can set the registry settings for one or more areas that are controlled by the software. 
    The problem I have - I get Error 53 Keyname specified more than once on Line 9 (second KEYNAME). In total I will have about 30 different sites this needs to be set up for.
    Does this mean that I can't set more than one registry key per "Policy" setting in the GPO?
    The adm file I have so far is below
    TIA
    Jason
    ---------------------------------------------CUT---------------------------------------------
    CLASS User
    CATEGORY "App Site Settings"
    POLICY !!Site1Policy
    EXPLAIN !!Site1Explain
    KEYNAME "Software\ApplicationCompany\Site1\Access"
    VALUENAME "SystemDatabase"
    VALUEON "D:\\App\\Data\\App.mdw"
    VALUEOFF DELETE
    KEYNAME "Software\ApplicationCompany\Site1\Arbitration"
    VALUENAME "ConfigPath"
    VALUEON "D:\\Site1\\Data"
    VALUEOFF DELETE
    KEYNAME "Software\ApplicationCompany\Site1\Common Settings"
    VALUENAME "ConfigFile"
    VALUEON "D:\\App\\Data\\App_Comms.mdb"
    VALUEOFF DELETE
    VALUENAME "SysConfig"
    VALUEON "D:\\Site1\\Data\\SITE1_SYS.mdb"
    VALUEOFF DELETE
    END POLICY
    POLICY !!Site2Policy
    EXPLAIN !!Site2Explain
    KEYNAME "Software\ApplicationCompany\Site2\Access"
    VALUENAME "SystemDatabase"
    VALUE "D:\\App\\Data\\App.mdw"
    KEYNAME "Software\ApplicationCompany\Site2\Arbitration"
    VALUENAME "ConfigPath"
    VALUE "D:\\Site2\\Data"
    KEYNAME "Software\ApplicationCompany\Site2\Common Settings"
    VALUENAME "ConfigFile"
    VALUE "D:\\App\\Data\\App_Comms.mdb"
    VALUENAME "SysConfig"
    VALUE "D:\\Site2\\Data\\Site2_SYS.mdb"
    END POLICY
    END CATEGORY
    [strings]
    Site1Policy = "Site1 settings"
    Site1Explain = "Enabling this setting configures the registry settings for dummy Site1."
    Site2Policy = "Site2 settings"
    Site2Explain = "Enabling this setting configures the registry settings for dummy Site2."

    Well - I ended up sorting this out - and no - you can't have the Keyname keyword twice - unless you enclose the the setting in a PART statement. Below is what I ended up with:
    ---------------------------------------------CUT---------------------------------------------
    CLASS USER
    CATEGORY "ApplicationSettings"
    KEYNAME "Software\ApplicationCompany\Site1\Common Settings"
    POLICY !!SITE1Policy
    #if version >= 3
    EXPLAIN !!PolicyExplain
    #endif
    KEYNAME "Software\ApplicationCompany\Site1\Access"
    PART !!ConfigFilePolicy EDITTEXT
    KEYNAME "Software\ApplicationCompany\Site1\Common Settings"
    VALUENAME ConfigFile
    DEFAULT !!ConfigFileDefault
    END PART ;!!ConfigFilePolicy
    PART !!SystemDBPolicy EDITTEXT
    KEYNAME "Software\ApplicationCompany\Site1\Access"
    VALUENAME SystemDatabase
    DEFAULT !!SystemDBDefault
    END PART ;!!SystemDBPolicy
    PART !!SysConfigPolicy EDITTEXT
    KEYNAME "Software\ApplicationCompany\Site1\Common Setting"
    VALUENAME SysConfig
    DEFAULT !!SysConfigDefault
    END PART ;!!SysConfigPolicy
    PART !!ArbitrationPolicy EDITTEXT
    KEYNAME "Software\ApplicationCompany\Site1\Arbitration"
    VALUENAME ConfigPath
    DEFAULT !!ArbitrationDefault
    END PART ;!!ArbitrationPolicy
    END POLICY
    POLICY !!SITE2Policy
    #if version >= 3
    EXPLAIN !!PolicyExplain
    #endif
    KEYNAME "Software\ApplicationCompany\Site2\Access"
    PART !!ConfigFilePolicy EDITTEXT
    KEYNAME "Software\ApplicationCompany\Site2\Common Settings"
    VALUENAME ConfigFile
    DEFAULT !!ConfigFileDefault
    END PART ;!!ConfigFilePolicy
    PART !!SystemDBPolicy EDITTEXT
    KEYNAME "Software\ApplicationCompany\Site2\Access"
    VALUENAME SystemDatabase
    DEFAULT !!SystemDBDefault
    END PART ;!!SystemDBPolicy
    PART !!SysConfigPolicy EDITTEXT
    KEYNAME "Software\ApplicationCompany\Site2\Common Setting"
    VALUENAME SysConfig
    DEFAULT !!SysConfigDefault
    END PART ;!!SysConfigPolicy
    PART !!ArbitrationPolicy EDITTEXT
    KEYNAME "Software\ApplicationCompany\Site2\Arbitration"
    VALUENAME ConfigPath
    DEFAULT !!ArbitrationDefault
    END PART ;!!ArbitrationPolicy
    END POLICY
    END CATEGORY
    [Strings]
    ArbitrationDefault =D:\SITE\Data
    ArbitrationPolicy =Arbitration path
    ConfigFileDefault =D:\App\Data\App_Comms.mdb
    ConfigFilePolicy =Application configuration file
    PolicyExplain =Enter Explainition of the Registry settings here
    SysConfigDefault =D:\SITE\Data\SITE1_SYS.mdb
    SysConfigPolicy =Application site system configuration file
    SystemDBDefault =D:\App\Data\App.mdw
    SystemDBPolicy =Application system database path
    SITE1Policy =Site1 Application Settings
    SITE2Policy =Site2 Application Settings

  • I'm trying to change my secret question because I forgot to answer. Followed all the instructions, but not yet I receive a message to let me change the answer, I tried more than once, but without an answer

    I'm trying to change my secret question because I forgot to answer.
    Followed all the instructions, but not yet I receive a message to let me change the answer, I tried more than once, but without an answer

    See this thread:
    https://discussions.apple.com/message/23280567#23280567

  • Report to select customer ID occuring more than once

    My report requirement is to capture transaction detail when a customer ID occurs more than once. Is there a way to do a sum count on the customer id in order to display the transaction detail. My current solution is to run a report where the customer count is greater than one, and then do a subquery against that data to display the transaction detail. I would like to be able to eliminate the subquery.

    Hi,
    You can create an analytic function to count the customer_ID per every transaction:
    count(customer_id) over (partition by ..<enter the fields of the report>.....)
    This will give for every transaction the number of transaction per same customer_id
    Now that you have it you can create a condition on it so
    that you will get only transaction with count customer_id > 1

  • The same SMS messages are showing more than once

    Hi,
    On my SMS page, my message threads are showing up more than once ,
    How would I go about fixing this?

    Hello,
    Maybe helps you:
    *[http://kb.mozillazine.org/Repeatably_downloading_the_same_messages]

  • Messages receive appear more than once in my mailbox

    The problem is the messages that i receive appear more than once and it keep doing this.
    Its like they were cloning or multiplicand, I have until 8 messages of the same thing and this thing continuous happening.
    What can I do?, i all ready try the suggestions in the support area in apple, but this does not works with my problem.
    I even think that cold be a virus.
    Any suggestions will be very appreciate.
    Thnaks

    Please, try to provide as much information as possible, instead of as little as possible. What’s the time interval chosen in the Remove copy from server popup menu?
    It looks like Mail has lost track of which messages have already been downloaded and is downloading them again, or maybe it’s failing to remove them from the server according to your settings.
    Try to remove from the server all the messages that have already been downloaded by clicking the Remove now button -- check for new mail first, just in case there is something amiss and that function doesn’t work as expected.
    If Preferences > Accounts > Advanced > Remove now fails to remove the messages from the server, you can try to do so manually using the Account Info window. In order to use that feature, choose Get Info (⌘I) from the Action menu (gear icon) located below the mailboxes list in the main Mail window.

  • Message may be sent more than once

    Hi,
    When I use mailq, I can read the following error in many emails:
    008B354E529F 7265 Tue Jun 30 10:08:19 [email protected]
    (delivery temporarily suspended: conversation with server.domain[/var/imap/socket/lmtp] timed out while sending end of data -- message may be sent more than once)
    [email protected]
    What is happen?
    Thanks for all.
    Message was edited by: jonflas

    It means that Cyrus IMAP is not responding or ready to deliver mail (at least temporarily). Most likely reason is that there are too many connections/users.

  • Timed out while sending ... message may be send more than once

    Hi,
    I regular have complaints from some clients receiving my emails 10 -15 times in their mailbox.
    When checking the maillog I always see : timed out while sending ... message may be send more than once. See below
    Problem can happen at any time, even when there is just 1 person connected to the server, so I rule out overload.
    95% of mails send arrive without problem.
    When looking the dns mx info of these clients I am having problem with, all have multiple (round-robin ?) mx-hosts (eg mx.mailprotect.be).
    Is someone else having these problems ?
    gr
    Fonny
    Nov 20 14:05:05 osxserver postfix/smtp[33385]: 3846CBE9FFC7: conversation with monitor.estrel.com[62.154.155.69] timed out while sending end of data -- message may be sent more than once
    Nov 20 14:15:48 osxserver postfix/smtp[33385]: 3846CBE9FFC7: to=<[email protected]>, relay=mx-30.startplus.de[62.154.155.70]:25, delay=1826, delays=486/0.01/716/623, dsn=4.4.2, status=deferred (conversation with mx-30.startplus.de[62.154.155.70] timed out while sending end of data -- message may be sent more than once)
    Nov 20 14:15:48 osxserver postfix/smtp[33385]: 3846CBE9FFC7: to=<[email protected]>, relay=mx-30.startplus.de[62.154.155.70]:25, delay=1826, delays=486/0.01/716/623, dsn=4.4.2, status=deferred (conversation with mx-30.startplus.de[62.154.155.70] timed out while sending end of data -- message may be sent more than once)
    Nov 20 14:27:06 osxserver postfix/smtp[34737]: 6F586BEA0F09: lost connection with mx1.hotmail.com[65.55.92.136] while sending end of data -- message may be sent more than once

    It means that Cyrus IMAP is not responding or ready to deliver mail (at least temporarily). Most likely reason is that there are too many connections/users.

  • Hello. My iPhone 4s when recieving message plays the tone more than once. How to stop that?

    It plays the tone more than once and it's not playing the tone fully. It plays like it is "stuck". Like CDs play when they are scratched. How can I stop that?

    Pause and off are the same thing.   This is how you stop the music.
    iPhone User Guide (For iOS 5.0 Software)

  • Inbound interface was found more than once

    Hi All,
    Currently I'm working on a scenario wherein an invoice file is generated and created on FTP server, PI system picks up invoice (xml file) and sends to customer via EDI 810. The scenario failed in sxmb_moni and below is the error message.
    <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="IF_DETERMINATION">CX_ID_PLSRV</SAP:Code>
      <SAP:P1>Inbound interface was found more than once (for same sender and receiver) for outbound interface urn:xyz:sap:components. 810_Outbound_Async_MI</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error when determining the inbound interface: Inbound interface was found more than once (for same sender and receiver) for outbound interface urn:xyz:sap:components. 810_Outbound_Async_MI Inbound interface was found more than once (for same sender and receiver) for outbound interface
    Can anyone help me out and provide some valuable suggestions.
    Regards
    Faisal

    Hi Abdul,
    Try to run the scenario in the ID.
    There is one test tool to in directory for this, login to ID --> go to Tools --> Test configuration.
    This will show you the error in the exact step.
    -Supriya.

Maybe you are looking for