Custom variant for FBL5N
Hello Experts,
I have created a variant as CUS&TEST for FBL5N with some values and changed
the txn FBL5N to add the 'start with variant.
When i execute FBL5N
when i choose any layout on selection screen, execute and come out of FBL5N.
When i reexecute the FbL5N,i can't see the previous layout. If i hadnt put the start with variant for FBL5N, it is displaying the previous selected layout.
Please help on this how to achieve the previous layout?
THanks
Ganta
The 'start with variant' on the transaction is for a selection screen variant.
The layout on the selection screen is a layout variant.
Rob
Similar Messages
-
HI,
I need to copy the program RFITEMAR to ZRFITEMAR and should create a ZFBL5N.
I created a ZRFITEMAR program and created ZFBL5N.
When I am executing program standalone it is not giving any dump, but when I am trying to execute newly created transaction it is giving the following dump.
Could you please tell me why and what needs to be done.
Runtime Errors LOAD_PROGRAM_NOT_FOUND
Exception CX_SY_PROGRAM_NOT_FOUND
Date and Time 08/04/2011 11:52:53
Short text
Program " " not found.
What happened?
There are several possibilities:
Error in the ABAP Application Program
The current ABAP program "RSDBSPMC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
or
Error in the SAP kernel.
The current ABAP "RSDBSPMC" program had to be terminated because the
ABAP processor detected an internal system error.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_PROGRAM_NOT_FOUND', was not
caught in
procedure "%_IX_INIT" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
On account of a branch in the program
(CALL FUNCTION/DIALOG, external PERFORM, SUBMIT)
or a transaction call, another ABAP/4 program
is to be loaded, namely " ".
However, program " " does not exist in the library.
Possible reasons:
a) Wrong program name specified in an external PERFORM or
SUBMIT or, when defining a new transaction, a new
dialog module or a new function module.
b) Transport error
How to correct the error
Check the last transports to the R/3 System.
Are changes currently being made to the program "RSDBSPMC"?
Has the correct program been entered in table TSTC for Transaction "ZFBL5N "?
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"LOAD_PROGRAM_NOT_FOUND" "CX_SY_PROGRAM_NOT_FOUND"
"RSDBSPMC" or "RSDBSPMC"
"%_IX_INIT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
Edited by: SAP ABAP79 on Aug 4, 2011 6:12 PMHello,
It seems like there is some configuration missing for customize transaction.
You can put a break-point where it is giving dump and analyze the data fetching which leads to "%_IX_INIT" "(FORM)"...
Thanks -
Transaction variant to disallow change in FB02 not working for FBL5N / FB09
Hi SAPtechies,
I have created a transaction variant to disallow change in all fields other than Text (BSEG-SGTXT), and activated it for standard transaction FB02.
This works well when FI document is changed via transaction FB02, but fails when the same document is changed via FBL5N / FB09.
The screen is same for FB02 & FBL5N:
Program (screen) SAPMF05L
Screen number 301
Program (GUI) SAPMF05L
I have already checked for enhancement in PBO INCLUDE MF05LO00, but there was no success.
Can anyone suggest me another methadology to greyout or make FB02 fields uneditable, with same functionality also working for FBL5N/FB09?Hi ,
I could achieve a way to disallow editing in FB02 item level fields using substitution & custom exit.
Additional requirement was that I want to assign authorization for particular users who can change all fields.
Any suggestions on it?
Our Basis team has created new role & assigned this role for FB02.
But this role has got many technical authorization objects.
Below check is not working:
AUTHORITY-CHECK OBJECT 'S_TCODE'
ID 'TCD' FIELD sy-tcode.
Thanks...Tanaya -
Fbl5n: The printer provides me only one customer items for each page...
Hi all,
launching t.code FBL5N, and printing the repost list, the printer provides me only one customer items for each page...
I'd like obtaining more customer items for each page...
What to do?
ThanksHi Umberto..
Thats how the standard report works..
To meet your requirement, you would probably need to look at another standard report.
In case you need further clarification, please feel free to write to me..
Good Luck!
Lucid-Mind... -
How to create transaction or screen variant for custom tcode in module pool
Hi,
I have one module pool program with custome tcode ,i want to create transaction or screen variant for this tcode.Next time when we run this tcode we need a variant for this tcode.
I tried by using of SHD0 but it is working only for standred tcodes.Is there any possibilty please help me.
thanks,
Lavanya.Hi,
you created a Custom Tcode for ur module pool Pgm..if u execute the Tcode in the output screen give the input details and press Save Option then variant will be created. Then you can use that variant.
otherwise.. while creating a Tcode..
select an option for Tcode type Tranasction With variant ..there u will provide the variant for ur Tcode ( which is already created ).
Regards,
PraVeen. -
1 custom field not showing up for modification in new List Variant for KS12
Dear SAP Experts,
I need some help regarding list variants using custom fields. I made a new List Variant for transaction KS12 using a few custom and standard fields. The custom fields are in CI_CSKS structure. I did all this according to not 95080 using option two (Adjust screen 1399 in function group KMA1). I got the header to display the name of the fields in SE51. The strange things is that after I start KS12 with the new list variant one of the custom fields doesn't show up for modification if there is no value in it where this is not the case with the others. That is if there is no value in it already (even on character) I can't enter new values in to it, which beats the purpose. I checked the attributes of the the custom fields and they are all the same, unless I missed something.
Does anyone have an idea why this could be?Hi Michael - I too have exactly the same problem in Lion. It seems to be a bug.
A minor one, given all the other much larger issues I have with Lion.
I'm living with it in the expectation that someone will fix it. I notified it ages ago - long before the recent Lion update.
I am mainly using Snow Leopard. This problem doesn't happen in Snow. -
Transaction Variant for a Custom Report
Hi Folks...
I am trying to create a transaction variant for a custom report...and i am unable to do it. Have any one tried that before and got it worked..please let me know.
Thanks in advance.
Rajeevhi,
i also used a different approach based on the requirement. this might be helpful to someone:
requirement: to make one of the parameter fields as display only. other users should not be allowed to edit this field & make it modifiable again.
_solution1:_ in the program, assign the parameter field to a modification id and make it protected (screen-input=0).
limitation: needs program modification incase there is a future requirement to change the parameter field value.
solution2: [1]create & save a variant and protect that parameter field. [2] go to SE93 & create a report transaction, put your saved variant in the 'start with variant'. [3] go to SU21 & create an authorization object for controlling the access to the variant. [4] ask your basis to attach this authorization object to the user id responsible for maintaining the variants for that program. [5] add a logic to check the authorization object in your program whenever the user tries to save or delete variants.
remarks: in production, make sure the authorization object & the update profile are transported. create also the same variant name as what you have defined in your report transaction code. -
User specific default variant for FBL1n FbL5n
Friends,
I am trying to create a variant for FBL1n report layout for specific user. Now the issue is the user has to go and select his specific variant every time he executes FBL1n. Is there any way by which we can default the specific variant for specific user.
Any help is much appreciated.Hello,
Go and change the variant selection settings in FB00. You select the relevant variant.
Regards,
Ravi -
Dear Experts,
I want to develop a custom FM for clearing (with the interface of FKK_SAMPLE_TFK115). Basically I want to assign clearing amount available to different items in table T_FKKCL_E115.
What should I do to define a fixed amount to some line item in table fkkcl
Say I have 2 open items in account
Amount Main Transaction Sub transaction
100 6000 0010
200 6000 0020
Say consumer makes a payment of 100 and I want it to clear the amounts above by 50(i.e equally between open items) then as per the documentation of the FM FKK_SAMPLE_TFK115 i should do this
Loop at t_fkkcl_e115 where betrw > 0
E_AUGBW_E115 = u201850u2019
E_XAKTP_E115 = u2018Xu2019
Endloop
But this code is not working. The system posts a credit open.
What could be the reason?Also, when I set an external debugger on the custom FM for clearing and put this custom FM in step 2 of my variant, the system doesnu2019t seem to execute the custom FM when I make the payment. However, if I put the FM in step 1 it does execute the FM.
I also tried another scenario. I made a payment in such a way that a credit open was posted. Then I ran account maintenance(behind which I had put the same clearing variant as the one mentioned above). Even if the FM has been put in step 1, the system doesnu2019t execute the FM!
Its strange but for some reasons this is how the system is behaving. If there is any confusion and you guys are not clear about whats happening then please do tell. I would elaborate the issue.
And guys please try to answer the first post. Would really appreciate.
Thanks in advance! -
F-53 and F-28, Customized columns for cash discount and %
Hi Expert,
With reference to the subject of: Customized columns for cash discount and % ...
I faced the problem of not able to set / defined hidden column for cash discount and % by creating a new variant.
Steps:
Create a variant
Click <administrator> button ... mark the columns hidden, and click <activate> button
Then click <Save> button
Problem: Every time I using the F-53/F-28, the layout is not working, and when goto check the variant settings, the cash discount and % columns remained unchecked.
SAP version: 4.6
Kindly advise.
Thanks and regards,
sbmelHi JP,
It is not working using field status group, as I am using F-53 and F-28 and not FB50/60/70.
The purpose I want to create variant for screen after clicking <process open item> is to control column display (hide cash discount and %). if the variant is working, I can create a customized Tcode for the F-53 and F-28.
Now problem is that variant seem not working.
Thanks and regards,
sbmel -
HOW TO Create variants for transaction MASS on LFA1 object?
hOW TO Create variants for transaction MASS on LFA1 object?
Edited by: cheppalliakr on Nov 10, 2011 1:09 PM
Moderator message: please do more research before asking, show what you have done yourself and provide more information when asking.
Edited by: Thomas Zloch on Nov 10, 2011 3:10 PMHi Oscar ,
You need to create optional date prompt variable in BW which fills your requirement .
Ex : If you require report should always run for 1st of the month to last of month .Then create Optional date variable in BW with interval .write customer exit ,
if from date is left blank it should take 1st of the month and if todate is left blank it should take last of the month .
when creating webi schedules , leave prompts as blank. -
Customer Open Item - FBL5n - segment field
added field segment to tcode OBVU...
the field appears on FBL5n, customer open item,but the amount is not populating. any ideas?Hi,
The report S_ALR_87012174 uses the logical databse DDF which does not have this field of PO number (BSTKD) given in the sales order, as it is the customer purcchase order nu,ber for the sales application.
This it is not availble for the data source, so the report can not be enhanced for that.
You ned to create a custom report for the same, if needed this desperatly.
Regards,
Gaurav -
Create a variant for Purchase register
Hi,
while implementing MM& CIN for my client, created one T.code YDOM ( customized T.code) for purchase register.
with YDOM t.code users can see the purchase register reports. but some entries are not showing values.
user is asking why some entries not showing any value?
with the help of YDOM t.code, shall i create any Variant? so that remianing entries values flow correctly.
what is the procedure to create a variant for YDOM t.code?
please let me know
regards,
obulesudo you mean that system is displaying the fields but values are not coming in there then variant is not the solution and you need to check with an abaper why data is not flowing there
and if you want to change the screen layout then you are going the right way as mentioned in above thread -
System audit trail for FBL5N and Mass Change use
Hello,
My client carried out the foll actions yesterday.
Called TCode FBL5N using a range of customers
When the line items were displayed, they selected some of them and then went into Environment - Mass Change - New Values
Here they input a new value to the Dunning Block field.
Then they saved it and came out.
Later they realized that they should not have made the changes to some of the records. Unfortunately, now they dont remember either the customer range for which they had run FBL5N or the line items which they had changed.
So, the question is: is there any way by studying the audit trail or system history, one can find out which are the documents/line items that were changed yesterday within a specific time frame using TCode FBL5N and then Mass Change?
Please see if you can provide some input.
Regards,
Suvarghya DuttaHello,
It must have been kept to "All"
From future, all your transactions will have security audit log.
If you want to see the system log, then visit SM21.
Regards,
Ravi -
Disable variants for specific queries or users
Hi,
We recently upgraded to NetWeaver 2004s and are now able to create and use multiple variants for variables for queries. Both analyzer and web support this feature. Is is possible to deactivate this option so that specific queries or users are no longer able to see or create these variants?
With regards,
AlexIs there anyone who can point me in the right direction? Do I have to change a web template or customizing or something else? Please help!
Maybe you are looking for
-
How can I add the requester name in the To: field of the email generated when a Smart Card certificate is issued on his behalf. I want to address the possibility of someone (Enrollment Agent) issuing a Smart Card certificate on behalf of a user, assi
-
I got an iPod touch as a Christmas gift to replace an old broken iPod Nano, and it's worked fine apart from this thing with the Albums. Certain Albums (Albums made up of individual songs by different artists) aren't properly grouping into a single A
-
Hi I am not sure if this is a bug or expected behaviour in Jaas. I have two implemeted two LoginModules. I called logincontext.login() ( Both the login modules have the control flag as "SUFFICIENT". The login() method of FirstLoginModule is successfu
-
I just burned photos from different albums to CD-R. When I checked on the photos I burned on the CD-R afterwards, I noticed that the titles of each folder that these photos are extracted from appear. How can I get rid of these titles???
-
Deletion of digit in internal table field
Hi friends, i have internal table itab.That itab contains the field A the contents of a is "@01' i want to delete that @ before uploading.Where can i put that logic after uploading function or anywhere? and tell me the best logic to del