Custom version comparison under the new application udpater

Hi,
With the new versionNumber syntax introduced in Air 2.5, is the isNewerVersionFunction field still supported and if so, is it here to stay?

As Léonie noted the error should never happen regardless of what you or Aperture do. So it is a bug in the code.
The big question is is it repeatable. If it is it makes the coders job a lot easier to try and fix it. It it was transient then there would not be much to go on.
My suggestion is to wait for the repair to finish and see if you  can reproduce the crash. In either case you should file a bug report. Let them know if it is reproducible and hopefully they will take if from there,
Travelling now and for the next week or so. email me if you have any other questions. Checking email more often then checking here.
good luck
regards
ps tethering off the iPhone reslly works well, even at 80mph (128 KPH, the slow lane in Germany )

Similar Messages

  • Hi there. Any one can tell me how erase cookies under the new safari Version 5.1 (7534.48.3)? Any one?

    Hi there. Any one can tell me how erase cookies under the new safari Version 5.1 (7534.48.3)? Any one?

    Click on the Safari menu then click on preferences the click the security icon.

  • How to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx?

    Dear SharePoint Developers,
    Please help.
    I need to know How to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx?
    I think this is a "sealed column", whatever that is, which is  shown in SPD 2013 as a column of content type "document, folder, MyCustomContentType".
    I know when I set the column order in my custom Content Type settings page, it is correct.
    But, when I load the NewDocSet.aspx page, the column order that I set in the settings page is NOT used for this "sealed column" which is bad.
    Can you help?
    Please advise.
    Thanks.
    Mark Kamoski
    -- Mark Kamoski

    Hi,
    According to your post, my understanding is that you want to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx.
    Per my knowledge, if you have Content Type management enabled for the list or library (if you see a list of content type with the option to add more), the display order of columns is set for each content type.
    Drill down into one of them and you'll see the option under the list of columns for that content type.
    To apply the column order in the NewDocSet.aspx page, you need to:
    Select Site Settings, under Site Collection Administration, click Content type publishing. In the Refresh All Published
    Content Types section, choose Refresh all published content types on next
    update.
    Run two timer jobs(Content Type Hub, Content Type Subscriber) in central admin(Central Administration--> Monitoring--> Review timer jobs).
    More information:
    http://sharepoint.stackexchange.com/questions/95028/content-types-not-refreshing-on-sp-online
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • I need to install iWork 09 so I can open the many pages document files that will NOT open under the new pages 5. Mavericks will not accept an install from my iWork's 09 CD. How do I get around this?

    I need to install iWork 09 so I can open the many pages document files that will NOT open under the new pages 5. Mavericks will not accept an install from my iWork's 09 CD. How do I get around this?

    Hi, I'm helping StringSinger2 with this problem.
    The previously installed version is Pages 3.0.3 (the same as from iWork 08). This version (Pages 3.0.3/iWork 08) is incompatible with Pages 5.
    That is why it would be helpful to install iWork 09, which is the version between the two. It will open the older 08 files, and its saved files are readable by the new Pages5.
    SO...
    When I try to install iWorks 09 from my retail DVD the error message is "the installer is damaged". (I know the dvd is good, I installed iWorks09 to my laptop today.) Is the "installer" part of the system files? And - If that is damaged is there a patch for that?
    Many Thanks!

  • Getting error when creating the new application

    Hi Sandeep,,
    wen iam creating the new application iam getting
    An error occurred while processing this page. Check the log for details.
    where shud i have check log details..
    i have given the following iputs
    in select tab:
    datasource name :oradsn
    calender:
    custom:
    prefix tp
    perids per year 13
    application;
    test
    description:
    example
    shared service project
    unassinged
    instance :newinstance
    calender
    Select the default currency for viewing data in the application.
    Default Application Currency
    USD $ United States of America dollar
    Will your application support multiple currencies?
    no
    Standard Plan Types Name
    Plan Type 1
    could you please let me know the solutions for this
    thanks and best regards,
    Kishore

    1. As you are taking service, your database is oracle database, you might have created a user/schema .
    2. When you are creating FDM application and that too providing details of database , there is a button 'options',which has more options like tablespace..etc.
    3. If you have created a schema and it has a specific table space ,then you need to provide these details also.else, while creating a user, if you have selected everything as default, then no need to go to 'options'.
    Thankx
    Nick

  • While i sync my iphone 4 with itunes 10.5 ,it removes the new applications i have been installed on my phone!

    while i sync my iphone 4 with itunes 10.5 ,it removes the new applications i have been installed on my phone!
    please help my to sync my new applications with my PC

    Unfortunately just saying "OSX" isn't enough in this case because it applies to 10 different system versions.. You have to have at least OSX 10.6 (Snow Leopard).

  • When I open iPhoto 9.2.1 it says that my library needs to be upgraded but when I upgrade the library I am trying to open (33 GB worth of pictures from 2006) the new application says it cannot read the files and how to find them on the system to reimport?!

    When I open iPhoto 9.2.1 it says that my library needs to be upgraded but when I upgrade the library I am trying to open (33 GB worth of pictures from 2006) the new application says it cannot read the files and how to find them on the system to reimport?! and then I'd like to erase the original files since the space requirement is huge!!!! Why is upgrading software iPhoto such a pain. I've gotta get a presentation done and all I get for my money is roadblock!!!

    hello, it sounds like the library is damaged.
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. 

  • I had a MobileMe account before... after upgrading to iOS 5, should I keep my account info under iCloud (settings) AND under mail, contacts and calendars (in Settings as well) or only keep the info under the new iCloud setting section?

    I had a MobileMe account before... after upgrading to iOS 5, should I keep my account info under iCloud (settings) AND under mail, contacts and calendars (in Settings as well) or only keep the info under the new iCloud setting section?

    That's not the correct port. It should be 993 for incoming.
    If you signed into iCloud from the System Preferences, it should automatically create the iCloud account for you in Mail. Sounds like it is an account you already had set up for MMe in Mail.
    Open Mail preferences, open the Accounts tab, disable that account in the advanced pane.
    Open Sys Prefs, open the iCloud tab, and sign out of iCloud. Then sign back in and see if a new iCloud account is automatically created.

  • I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview

    I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview shows the contents, I can't open the document (Powerpoint) and I can't move the document. I tried "Copy" and paste but it doesn't work. I tried "Share" with Airdrop and iChat, but the file is inaccessible. When i try to rename the file, it says the filename is too long.
    When I try to open it, it says the alias is not good, and asks if I want to fix the alias. I'm afraid to do that and lose all access to this document.
    Right now, it feels like a ghost document - it is on the computer intact, but it is in an undisclosed location and inaccessible.
    Please help!!

    I was able to resolve this by repairing permissions, even though no permissions error was listed specifically for that file.
    I could also have recovered it through Time Machine, but I'm interested in knowing how not to have this happen again!
    I was afraid of rebooting and possibly losing track even of the ghost.
    I did not try EasyFind - I'll keep that in mind next time.
    Thanks for all the comments.

  • I have an old user name tht is no longer accessible. I access fierfox through a new user name. I have copied the profile from the old user name. Can I have 2 profiles from which to choose when using firefox in the under the new username?

    I have a user name on my computer that was tied in with the domain name of the server at my workplace. I would access Firefox under this user name. I have now changed jobs, and for good and obvious reasons can no longer utilize my previous company associated username.
    I have set up a new username on the same computer. When I access Firefox, all of my old bookmarks are gone, because Firefox does not recognize me under the new username as the same person. In the meantime, I have established new bookmarks under the new username.
    I have copied my profile from Firefox under my old username. Can I have two profiles under my new username and pick which one I want to use at that time when accessing Firefox?
    I am running Windows 7 Professional, with 4 gig ram, Intel i3 CPU, 2.13 GHz, 64 bit operating system, Firefox 7.0.1
    Thank you

    You can not merge accounts.
    Apps are tied to the Apple ID used to download them, you can not transfer them.

  • How do I change the default program to open Pages docs to the old (4.3) version instead of the new one (5.0)?

    How do I change the default program to open Pages docs to the old (4.3) version instead of the new one (5.0)? When I do what Apple said and go to a Pages file in finder and select "get info" then select "Pages 4.3" and "change all" it just defaults to the new one even though I'd selected the old one. Do I need to completely uninstall the new version of Pages or is there another work around because the new version of Pages comes dreadfully short of the features I need that are included in the old one?

    Eric Kraft wrote:
    HOWEVER, if you modified a document in 5.0, 4.3 can't open it. You'll have to use Time Machine to replace the modified version with an earlier version that was last modified in 4.3.
    Actually there is a workaround.
    If you open the file in Pages 5, it can then be exported on Pages 0.9 format to another folder. I had to do this as the document was only in iCloud and couldn't be recoverd by Time Machine.
    Worked for me!

  • How to stop the bridge.exe active as to install the new application eg.Flash CC?

    how to stop the bridge.exe active as to install the new application eg.Flash CC? please help?
    I can't install the any new application every time.

    Please refer:
    http://helpx.adobe.com/creative-suite/kb/error-installation-cannot-continue-bridge.html
    Regards,
    Ashutosh

  • Please i want to remove the old version of itune, the new version does not delete it for some reason , what i should do?

    please i want to remove the old version of itune, the new version does not delete it for some reason , what i should do?

    See https://support.mozilla.org/en-US/kb/firefox-no-longer-works-mac-os-10-4-or-powerpc
    Since you have a Intel Mac, if you can upgrade to OSX 10.5.x then you may be able to use more current releases.
    jscher2000, You should link to http://www.mozilla.org/en-US/firefox/all-older.html for 3.6.28 since the ftp is not mirrored.

  • What to keep in mind whilie developing under the new IOS PLA

    Hi everyone.
    I found out the the new IOS PLA was introduced on June 2nd. I could not spot any noticeable differences from the previous one.
    The fellow developers at my office are quite acquaint with the previous PLA, however the release announcement sort of created confusion among them. They all wonder what to keep in mind while developing and publishing the apps under the new PLA.
    Your help will be much appreciated!
    Thanks in advance

    Very simply "wired for internet" just means that you have, probably, Category 5 (CAT5) ethernet cables and jacks prewired in the home. These cables should all lead to one common location, hopefully in a patch panel or box. In order for this arrangement to be of any use you need a multi-port router and/or switch. I doubt whether the contractor provides this router/switch as part of the deal. Anyway the router/switch would connect all of these cables together as well as your internet service (DSL, Cable Modem, whatever). Plugging into any of the jacks in the home would connect you to the router/switch, which in turn would issue your device an IP address and connect you to the network. Internet access, as well as file sharing, would be controlled by the router/switch. Very basic home network and nothing complicated. Your Apple TV will work just fine with this network. You could also connect a network storage device, such as a large capacity hard drive that could be shared by all users on the network. Getting more complicated involves having a dedicated server machine running OS X Server for example.

  • I have an academic version of Final Cut Studio on my laptop and recently purchased the most recent Full version of Final Cut Studio. Do I need to uninstall the academic version before installing the new version?

    I have an academic version of Final Cut Studio on my laptop and recently purchased the most recent Full version of Final Cut Studio. Do I need to uninstall the academic version before installing the new version? I ask because this is not an upgrade, but a completely new version.

    I'm with Jim on this.  It always seems to work out better if you do not install over another version.  You can use this app (freeware - thanks to Jon Chappel) to completely remove ALL Final Cut Studio apps and components: http://www.digitalrebellion.com/fcsremover/
    Once that's done, install your newly purchased version.
    -DH

Maybe you are looking for