Custom viewer icon not saved

In the app builder we are finding that when we use custom icons for the tabbar at the bottom it normally saves the location of your previously used icon when you edit.  However, for the viewer icon, it wont save it and everytime we edit we have to specify the location of the custom icons again.

I have the same problem!

Similar Messages

  • Windows 8.1 folder view settings not saved

    Hello, Everyone
    Windows 8.1 Each folder view settings not saved what i can do.I
    want different view settings in each folder likes folder 1 i want large thumbnails & folder 2 small
    What i can do to resolve the issue thanks in advanced.
    I don't have any backup no system restore I also try to rest or restore default view settings but none are working for me.

    Hi,
    This is default behavior. It is not possible to set Windows Explorer to remember individual folder view settings for folders included in libraries. All libraries and its included folders share the same view.
    Karen Hu
    TechNet Community Support

  • BPM Worklist: Searching in custom views does not work for protected flexfields !

    Hello,
    Have mapped few protected attributes in my .task file. Also created the corresponding labels on target SOA server. I am able to create custom views using these protected flex fields.
    But what I have observed is keyword based search is not working for custom views using protected fiexfields.. however it works fine with public fiexfields.
    Any pointers on this? Am I missing something in the configuration?
    Thanks..

    Can anyone help me?

  • Firefox v30 Privacy settings: Use customs settings are not saved

    After changing privacy settings to
    -> Use custom settings for history
    [X] Always use private browsing mode
    [_] Remember my browsing and download history
    [_] Remember search and form history
    [X] Accept cookies from sites
    Accept third-party cookies: [Always]
    Keep until: [I close Firefox ]
    When exiting Firefox and relaunching it, this settings is gone.
    and 'reset to [Remember history]
    Any suggestions as to how to solve this?
    Thanks
    =

    Sorry, to reset firefox will require me to install a number of plug-ins.
    All my settings were lost.
    Luckely I created a backup using MozBackup.exe.
    Some add-ons can easily be re-installed, but what about stuff like Acrobat PDF creator and Norton Vulnerability Protection. I think those add-ons are installed when an application is installed, so it would require me to re-install such applicatons.
    Preferences not saved: nothing is write protected.
    Deep sigh...
    =

  • Outlook view settings not saved

    I have one user who looses all View settings when restarting Outlook. Occasionally they will save, but it is very rare. Setting the Reading Pane to Off is one good example of a setting that does not save.
    The creation of new Views is also not saved. After restarting Outlook, the new View does not appear in Manage All Views.
    I have tried creating a new Outlook profile and I'm told that Office 2013 C2R has been re-installed since this problem started. 
    Outlook 2013 Click-To-Run via an Office 365 E3 subscription. Exchange Online mailbox. Windows 7 Pro 32-bit. 
    Any help would be appreciated. 

    Hi,
    Basically, Outlook view settings are stored in the default data file. If the data file is corrupt or recreated every time Outlook restarts, the view settings may be not saved.
    Does the user use Outlook with Cached Exchange mode enabled? If so, please go to
    C:\Users\%username%\Documents\Outlook Files and check if you have multiple .ost files in the folder.
    In addition, you may try to switch to turn off Cached Exchange mode and then test this issue again.
    Please let me know the result.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • 3D Render shows shadows/reflections in Custom View, but not in camera

    All vector content, extruded text and a simple ground plain to catch shadows, 50% reflective.
    The custom view shows all shadows & reflections correctly, but the camera will not show them.
    I've deleted / re-created cameras, lights, floor plains AND objects without solving the issue - it's the first time it's occurred in many similar projects.
    Win7 x64, 32Gb RAM (plenty), nVidia K5000 with 4GB handling previews & rendering. The problem persists even if switching to CPU rendering (which takes ages, obviously) so the driver is not to blame.
    Any ideas?

    If you start a new project, create a floor, add a 3D text layer, add a camera using one of the presets say 50mm lens, add a light and set up your extrusion and add shadows does it work? If not then reboot. If you can solve the problem with a new project then import your project that does not work and see if that works by copying and pasting layers one at a time into the comp that works to figure out where the differences lie. If that doesn't work try posting the project so we can take a look at it.

  • Custom fields values not saved in AUFK using bapi_alm_order_maintain

    Hi ,
        We have a requirement where we have to update the custom fields in enhancement tab of IW31 using bapi_alm_order_maintain.
    We are able to get the successful creation of work order ,but the custom fields are not updated in enhancement tab aswell in aufk table. We are passing values in below table of bapi.
    EXTENSION_IN
                STRUCTURE           =  CI_AUFK
                VALUEPART1        =  '20091223' .
    Please provide the solution.

    Hi Phani,
    May be these links are helpful:
    BAPI extention to work order aiming AUFK custom field filling
    Update custom fields in MARA (BAPI_MATERIAL_SAVEDATA)
    Also search sdn using the BAPI function module, you may get some idea.
    Regards,
    Swarna Munukoti

  • Custom color palette not saving.  Why?

    Logic is not saving changes that I make to the color palette.  I can make the change, but after I quit and restart Logic, the changes are gone.  Any idea why?

    I've answered this question, but I cannot figure out what I've previously done wrong.  I managed to save the colours and get them to reload when I went back in to Logic. Not exactly sure how I did it, but it doesn't save automatically. 

  • View settings not saving?

    In tiger, i was able to close off the preview option and have it not display thumbnails in icons (e.g., any setting in the "view options" pane. now, they never save at all. anyone else having this issue? thanks.
    ryan

    I want to "ditto" on this thread as well hoping our complaints collectively would be large enough for Apple to fix our view settings are not always saving permanently.
    Even when I check "Always open in xxxx view" within the View Options pane.
    It would appear my settings would take, but after awhile, or even after a restart, the folder would lose my view settings.
    And 10.5.1 did not fix this bug.
    I have been a die-hard Mac user since the Mac SE and Mac II. I've been reading with amusement as others berate the latest OS X update for not working properly. Then, I had always thought that they were over-reacting.
    But now, with all of the problems I have gone through with Leopard on my Dual G5, I, too, have lost it. My anger and pain have pushed me to madness; from the little annoying problems like this seemingly innocuous bug, to the unacceptable restarts and complete OS 10.5 fresh install I had to do because of system instability and/or application instability, I've never encountered so much personal frustration in an OS X upgrade in the past.
    Even initially, I was bemused by public rants on the failures of 10.5 after I had upgraded. But now after having to reinstall 10.5 from scratch, I'm at the point of crying foul myself to anyone who would listen: STAY AWAY FROM 10.5.

  • Query View name not saved in "Analysis Grid Properties" under Data Provider

    Hi BW World;)
    We are on BI 7.0
    I have created a BI workbook which contains a query view.
    However when we go into design mode and then "analysis grid properties" for this query view then "change data provider" it does not show the query view name but the query name. (we have saved the workbook)
    Is this the normal scenario?
    Surely should show the "query view name " and not the "query name" as confuses what data provider is being used?
    Is this a bug?
    Best
    Stevo.... Points of course... Thanks in advance.;)
    Edited by: bw4eva999 on Sep 10, 2009 4:40 PM     spelling

    Hi,
    You have created a workbook on top of a Query View which is again depends on a Query.Now the base for Query View is a Query.So the underlying Data Provider for a workbook is a Query.
    Hence when you go to Properties of grid->Change Data Provider,it shows the Query and the InfoCube,but not the Query View.
    So this is not a bug and this how its been designed.
    If you click for the Information of that workbook,it will show the Query and Info Provider,but not the query View.
    Though it looks like wierd,it is not a bug.
    Rgds,
    Murali

  • J4W 10.5 custom tab icon not visible

    After upgrading to Jabber Windows 10.5, the icon for my custom tab implementation is no longer displayed. Originally configured according to these instructions:
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Windows/9_7/JABW_BK_C4C679C9_00_cisco-jabber-for-windows-97/JABW_BK_C4C679C9_00_cisco-jabber-for-windows-97_chapter_0110.html#CJAB_RF_CCC55E6A_00
    Corresponding section in the 10.5 configuration guide has not been updated:
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/10_5/CJAB_BK_D6497E98_00_deployment-installation-guide-ciscojabber/CJAB_BK_D6497E98_00_deployment-installation-guide-ciscojabber_chapter_01001.html#CJAB_RF_CCC55E6A_00
    Am I missing something?

    Yes, that's option B as she still has the IMac but I'm curious as to why the TM backup isn't working - just in case I need to do this on another machine down the road, it would be nice to know what's going wrong with the more convenient TM restore option.... Thanks!

  • VIEW settings not saved in FINDER

    Lately my FINDER for viewing files does not save the settings I check in the VIEW menu. It states in the MAC HELP: "If you choose icon or list view, the Finder saves your view settings. The next time you open the window you will see the same view settings you chose previously." After I turn off the computer, the next time I restart it the settings are lost. I have updated the "Permissions" in the Disk Utility but it did not help. Do you have any other suggestions?

    I opened your "User Tip", Scott, and on the second page it gives information about the VIEW settings preferences. The NOTE in red letters seemed to have been my problem. It states "do not at any time use the"apply to all windows" option in VIEW OPTIONS and make sure this button is disabled. Somehow mine was enabled. I disabled it, logged out, logged in again, restarted my machine, the VIEW SETTINGS held. I then shut the computer down and when I restarted it today, all VIEW SETTINGS held. Thanks for the tip.
    Lollie

  • Custom tab data not saving in ME22N w/ BAdI ME_PROCESS_PO_CUST

    Hello all,
    I have implemented BAdis ME_PROCESS_PO_CUST & ME_GUI_PO_CUST and created a custom tab at the header level in ME21N/ME22N. I have fields such as Delivery Date and Ex Factory Date in my tab.
    We are able to put data in these fields and have that data populate their respective fields in the Purchase Order.
    Our users would like to be able to run ME22N and select certain line items and have only those items changed with the data from the custom fields. 
    So, my question is how do I handle line selection in the context of these BAdIs?  Is there a way to know which lines have been selected and then only change the data in those items?
    I have looked in Class CL_PO_ITEM_HANDLE_MM for an attribute or method that might help but I haven't found anything as of yet. 
    I have found that the field MEPO1211-TCSELFLAG is set when a line is selected in ME22N.  However, I haven't found a way to work with it.  It doesn't get passed to any of the methods in the BAdIs, as far as I know. 
    January 27, 2012  **************
    We were able to capture the lines selected by using code from method mass_change in Include LMEGUICJK, Function Group MEGUI.  The lines are in the lt_models table. 
    So, now my issue is getting data to save in ME22N.  When I put data in my custom tabs and select a line, the data gets changed on the screen but does not save.  It does work when I make a change in another field, like changing the description for instance.  I'm using the set_changed method in Process_Header from ME_PROCESS_PO_CUST but it doesn't work. 
    I'm getting the idea that I'm the first ABAP developer to try this...
    Thanks for any help.
    Kind Regards,
    Chris
    Edited by: Chris  Mowl on Jan 11, 2012 10:33 AM
    Edited by: Chris  Mowl on Jan 11, 2012 4:24 PM
    Edited by: Chris  Mowl on Jan 27, 2012 10:57 AM
    Edited by: Chris  Mowl on Jan 27, 2012 2:00 PM

    Hi,
    Checkout the below link :
    <link to blacklisted site removed by moderator>
    Shailaja Ainala.
    Edited by: Thomas Zloch on Jan 28, 2012 9:06 PM

  • Custom Paper sizes not saving

    Hi everyone
    Our IT department has just installed Acrobat X Pro on our PC and I have downloaded the instructions for printing custom paper sizes, but they don't save. I go to the printers and faxes, right click on the pdf printer, click on add under the PDF settings tab, add the name, dimensions etc ... click on modify/save ... and nada. When I go to print it isn't there. What am I doing wrong. I know it's going to be something really simple and I'm being a numpty.
    It's so much simpler on the mac. lol

    Hi Daniel. Thanks for that. It will let me gang up, but not repeat the page so I have a full page of the same thing. I read somewhere on here that I need a plug in for that. Is this correct? The thing is, I'm their graphic designer and they're making me redundant in a couple of months so I won't be here to keep on top of things for them. I use a mac which works perfectly, but they're wanting everything set up on the PC before I go because no-one other me uses macs and they want to put the system to bed. I expect they're going to have keep it going if they don't get the admin rights. To be fair, I really shouldn't care ... but I do. I'm such a sad sack. lol
    Thanks for all your help with this.

  • Custom Viewer does not show all folio / Custom Viewer zeigt nicht alle folios

    Hallo, ich bin neu hier im forum und habe gerade meinen ersten viewer zu apple gesendet.
    Mein problem ist, das in dem viewer nur eine kostenlose ausgabe unseres magazins , und das auto-renewable angezeigt werden. Wir haben allerdings noch drei weitere Ausgaben die non-consumable sind. Und diese werden nicht angezeigt. Die product-id´s sind bei apple und im Adobe Folio Builder gleich.
    Würde mich freuen wenn mir da jemand helfen könnte.
    mfg Uhtred
    Hello, I'm new to this forum and have just sent my first viewer to apple.
    My problem is that output in the viewer just one of our magazine free, and the auto-renewable appear. We have, three more issues, the non-consumable. And these are not displayed. The product-id's are the same for Apple and Adobe in theFolio Builder.
    Would be glad if someone could help me there.
    Uhtred

    Sign in to the Folio Builder panel the new Adobe ID (the one you specify as Title ID in DPS App Builder), and create a new folio. To get the articles from the old folio into the new one, you have two choices.
    (1) Use the Import command to import the articles. This works well if you set up your structure properly, including creating a sidecar.xml file.
    (2) Share the folio from the old Adobe ID to the new one. Use the Copy To command to copy over the articles.
    Then specify the folio metadata and cover images, and publish the folios.

Maybe you are looking for