Custom XML IP PHONE text on "Your current options" and softphone button
how maually or reconfigure the Custom text on "Your current options" and softphone button on the call manager 7.0 ?
There is no documentation ?
Hello, Please try this link
http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7906g_7911g/5_0/sip/english/administration/guide/11ag50si.pdf
Similar Messages
-
Custom XML IP PHONE text on "Your current options" and softphone button on
Custom XML IP PHONE text on "Your current options" and softphone button on call manager 7.0 call manager 7.0 ?
Hello, Please try this link
http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7906g_7911g/5_0/sip/english/administration/guide/11ag50si.pdf -
How to change "Your current options" to become our custom label
Dear All,
how to change "Your current options" in the IP Phone display, to become our custom label?
Thanks,
JerriHi jerry,
I don't know if it works out or not but if you want to try then refer below steps
1). download SCCP-dictionary.utf-8.xml from CUCM (tftp -i GET SCCP-dictionary.utf-8.xml)
2). Edit that file which contains "Your current options" as per your requirement and save it.
3). Upload file to all tftp servers (if you have multiple).
4). Restart tftp service of all tftp servers (if you have multiple).
If restarting tftp service don't help you then try to do factory reset of the phone.
Regards,
Nishant Savalia -
How to change the message in CUCM 7.0 " Your Current Options"
Dear All
can any body help me or assist me to type my own message at the botom of the phones by default its your current options but i tried to much to change it or find any way to change and i failed.
in Call Manager express it was easy to change just at the cli you type "system message Hello this is your IP Phone" but at the CUCM 7.0 i dont know how to change this and solve this problem so can any body tell me how to change this message please its needed 100% for me
i have atached the picture that where the message cames so you people can see it.
with regards
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;}
Waisudin Farzam ویس الدین فرزام
Project National IT Specialist متخصص ملی تکنالوژی معلوماتی
Sustainable Development of Natural Resources Project
IDA Grant No: H238-AF
Program Management Unit (PMU)
Afghanistan Geological Survey (AGS) Annex Building, Ministry of Mines,
Kabul, Afghanistan
AWCC Cell Phone: 0093 - 700 - 29 60 62
MTN Cell Phone: 0093 - 777 - 29 60 62
E-Mail Address: [email protected]
E-Mail Address: [email protected]
E-Mail Address: [email protected]
Skype ID: wais.farzam
MSN ID: [email protected]You cannot change it, in CCM it was possible due to it being Windows and you had access to all the files.
CUCM does not grant access to the necessary files for this unless you have root access and it's not granted for purposes other than troubleshooting or to apply a workaround from a bug.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk -
How to change the message in CUCM 7.1(2) " Your Current Options"
Hi,
Can any one help me how to change the system message in CUCM 7.1(2) " Your Current Options" to another text.
Thanks...As far as I know you can't change that on CUCM.
On CME you can.
Bye,
Jan
Sent from Cisco Technical Support iPad App -
'not compatible with your current codelines' and 'Patch 7461070'
We are trying to upgrade EBS from 11.5.10.2 to R12.1.1 using Maintenance Wizard v2.15, and we are on "Apply Preinstall Patches" for "Perform the Upgrade". We got some strange errors:
(1). AutoPatch error for "Task: Apply Preinstall Patches":
This patch is not compatible with your current codelines.
This patch is compatible with: entity 'xla' - codeline 'R12.XLA.A'.
Your current on-site codeline for the entity 'xla' is: 'R12.XLA.B'.
for "1-Apply patch 6832389 (Required)", "2-Apply patch 6625757 (Required)", "3-Apply patch 6648785 (Required)", "4-Apply patch 6166150 (Required)", "5-Apply patch 6146757 (Required)", "6-Apply patch 6757123 (Required)", "7-Apply patch 6172183 (Required)", "8-Apply patch 6774040 (Required)", "9-Apply patches 6976563 and 7351384 (Conditionally Required)"
(2). Got patch version mismatch errors when applying patch#7461070 for "10-Apply AD 12.1.1 upgrade driver (Required)":
###############################################################################SUMMARY - patchit12.sh - of patch: 7461070, driver: driver=u7461070.drv###############################################################################patchit12.sh - is exiting with no actions. ie. Patch 7461070 not applied.There is a mismatch between the patch version specified and the releaseversion obtained from your Applications environment. In order to applyRelease 12 patches to previous Applications versions, the patch must be applied in preinstall mode.This can be done by passing the appropriate value to the preinstall parameter of eof_patch12.sh.INFO: Not starting patch alert monitor, to start: Login Engineer, User Admin, Update Profile
For first issue:
Verified first 2 patches:
Patch 6832389:R12.AP.A R12: Critical Pre-upgrade for R12
Patch 6625757 6625757:R12.XLA.A
These patches are for 12.0 upgrade, not for 12.1
Why MW is trying to apply these R12.0 patches?
For second issue I found Note 779466.1 Patch 6604842 fails during a R12 Upgrade via Maintenance
Wizard as DB still reports R11i
similar but at 12.0 level.
Shoul all customers follow the workaround and manually apply the patch?I got similar error:
ACTION: execute on node: apps, patch=7461070, driver=u7461070.drv
patchit12.sh REMOTE SIZE: 53273 LOCAL SIZE: 53273
OK - no update needed for patchit12.sh, same size as on EOF: 53273 bytes.
Found release REL=11.5.10.2 from fnd_product_groups.
WARNING - patchit12.sh has been invoked on a non-R12 Applications system.
SUMMARY - patchit12.sh - of patch: 7461070, driver: driver=u7461070.drv
patchit12.sh - is exiting with no actions. ie. Patch 7461070 not applied.
There is a mismatch between the patch version specified and the release
version obtained from your Applications environment. In order to apply
Release 12 patches to previous Applications versions, the patch must be
applied in preinstall mode.This can be done by passing the appropriate
value to the preinstall parameter of eof_patch12.sh.
INFO: Not starting patch alert monitor, to start: Login Engineer, User Admin, Update Profile
Should patch 7461070 be applied manually? -
How can you add your own print and export buttons to the CR viewer toolbar?
I posted a previous question that was asking how to get around the Information Bar in IE7 when you export and print. Unfortunately the CR viewer file download code gets blocked by IE7 because the buttons don't directly download the file. However, I have been able to get a regular button that calls the following code and streams the file to the client and IE7 does not block it.
Sub PrintPDF(sender As Object, e As System.EventArgs)
Dim crReportDocument as ReportDocument
Dim crExportOptions as ExportOptions
Dim crDiskFileDestinationOptions as DiskFileDestinationOptions
Dim Fname as string
CrReportDocument = New ReportDocument()
CrReportDocument.Load(Server.MapPath("estactionlist.rpt"))
Fname = Server.MapPath("./") & Session.SessionID.ToString & ".pdf"
CrDiskFileDestinationOptions = New DiskFileDestinationOptions()
CrDiskFileDestinationOptions.DiskFileName = FName
CrExportOptions = crReportDocument.ExportOptions
With crExportOptions
.DestinationOptions = CrDiskFileDestinationOptions
.ExportDestinationType = ExportDestinationType.DiskFile
.ExportFormatType = ExportFormatType.PortableDocFormat
End With
CrReportDocument.Export()
Response.ClearContent()
Response.ClearHeaders()
Response.AddHeader("content-disposition", "attachment;filename=test.pdf")
Response.ContentType = "application/pdf"
Response.Charset = ""
Response.WriteFile(Fname)
Response.Flush()
Response.Close()
System.IO.File.Delete(Fname)
End Sub
So here are my questions?
1. Is it possible to add a custom print control/icon to the CR viewer toolbar?
2. If one is not possible, then is it possible to override the CR viewer print and export buttons with your own subroutines like the one above?
I just want my page to look nice and hate to have print and export buttons outside of my CR viewer.
Thanks,
KevinIt might be possible to replace the buttons in a windows app since you can retrieve the toolbar as a toolbar object in the winform viewer ( ToolStrip toolBar = (ToolStrip) crystalReportViewer1.Controls[3]; ) however with a web app, it's a lot more difficult.
The problem is that that you need to parse the Request string to try and figure out if the print / export button was clicked. The code below makes the print button disappear if you click it, so you should be able to modify it to call your custom printing / exporting code instead (You have to do this check in a postback)
Dim I As Integer = 0
If Request.Form.AllKeys.Length > 0 Then
For I = 0 To Request.Form.AllKeys.Length - 1
Response.Write(Request.Form.Keys(I).ToString & "<BR>")
If Request.Form.Keys(I).ToString = "CrystalReportViewer2:_ctl2:_ctl2.x" Then
CrystalReportViewer2.HasPrintButton = False
End If
Next
End If
Shawn -
How to create new Custom XML Report without using Form Builder
Hi,
What are the steps to create new Custom XML Report without using Report Builder ?
Thanks and Regards,
AbhiHi,
Steps we now follow
1)Create Data Model in Reports Builder
2)Create xml
3)Insert xml in Publisher to build Fomat
4)FTp rdf
5)Create Data Definition and Template
6)Create executable and Concurrent Program
Is there any way we can build reports without use of Report Builder ? By writing PL SQL Package for Before Report and After Report etc ...
Thanks and Regards,
Abhijit Rode -
Read your adobe pdf text on your mobile phone
How to do it. That is easy with yong iReader... open your pdf content, copy all with CTRL-A button and paste it into yong iReader. You will be able to view and click the link on your "e-book".
You can view your book offline using a laptop or your mobile phone once you have created it at
http://ireader.homeip.net
or
http://ireader.homeip.net/reader
Yong iReader is used conveniently for offline reading with auto-scrolling, auto-bookmark and font size adjustment. It uses the Copy & Paste method to bring adobe pdf text to your mobile phone. It is 100% free! enjoy!the mobireader is one of the best option and moreso you can download it for free. it comes with the pc version and after installation, it detects for any mobile device and installs the needed files. with this u can download any document to your mobile phone. am currently using it.
all the best
N73 ME
v.0750.31.2.1
15-12-2007
RM-133
Nokia N73(08) -
Hello, I have CME 8.6 installed on two 2851s and before going into production, I am testing a few phones.
One of my 2851's is creating cnf.xml files for each phone using SEP<Mac address>.cnf.xml and the other one will not and the phones keep booting up with XMLDefault.cnf.xml.
I've looked at both configurations and I can't see what the difference is. Other than not being able to create the SEP<MacAddress>.cnf.xml files, the phones appear to be loading up fine.
One difference I see is the "its" directory is located on system: on the one that creates the cnf files, and the "its" directory is located in flash on the one that doesn't, although I don't know how that matters.
Below is the one that doesn't create the SEP<MACADDRESS>.cnf.xml files for phones:
Current configuration : 2657 bytes
! Last configuration change at 02:12:45 UTC Wed Oct 8 2014
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname RtrPod2
boot-start-marker
boot-end-marker
no aaa new-model
no network-clock-participate wic 3
crypto pki token default removal timeout 0
dot11 syslog
ip source-route
ip cef
ip dhcp excluded-address 20.0.30.0 20.0.30.10
ip dhcp excluded-address 20.0.10.0 20.0.10.10
ip dhcp pool Data
network 20.0.10.0 255.255.255.0
default-router 20.0.10.254
option 150 ip 20.0.30.254
ip dhcp pool Voice
network 20.0.30.0 255.255.255.0
default-router 20.0.30.254
option 150 ip 20.0.30.254
dns-server 8.8.8.8
no ipv6 cef
multilink bundle-name authenticated
voice-card 0
license udi pid CISCO2851 sn FTX1331AJQ1
username cisco privilege 15 password 0 cisco
redundancy
controller T1 0/3/0
controller T1 0/3/1
interface Loopback0
no ip address
interface GigabitEthernet0/0
no ip address
duplex auto
speed auto
interface GigabitEthernet0/0.10
encapsulation dot1Q 10
ip address 20.0.10.254 255.255.255.0
interface GigabitEthernet0/0.30
encapsulation dot1Q 30
ip address 20.0.30.254 255.255.255.0
interface GigabitEthernet0/1
ip address 192.168.5.232 255.255.255.0
duplex auto
speed auto
interface Serial0/0/0
no ip address
shutdown
clock rate 2000000
interface Serial0/0/1
ip address 200.2.0.1 255.255.255.0
ip forward-protocol nd
no ip http server
no ip http secure-server
tftp-server flash:cmterm-7940-7960-sccp.8-1-2.cop.sgn alias cmterm-7940-7960-sccp.8-1-2
tftp-server flash:/Ringtones/DistinctiveRingList.xml alias DistinctiveRingList.xml
tftp-server flash:/Ringtones/Ringlist.xml alias Ringlist.xml
tftp-server flash:P00308010200.bin
tftp-server flash:P00308010200.loads
tftp-server flash:P00308010200.sb2
tftp-server flash:P00308010200.sbn
control-plane
mgcp profile default
telephony-service
no auto-reg-ephone
max-ephones 110
max-dn 288
ip source-address 20.0.30.254 port 2000
system message Branch System
load 7960-7940 P00308010200
max-conferences 8 gain -6
transfer-system full-consult
create cnf-files version-stamp Jan 01 2002 00:00:00
ephone-dn 1 dual-line
number 2000
label Phil Davis
description Branch Office
ephone 1
device-security-mode none
mac-address 0009.E89D.0B4F
username "cisco" password cisco
button 1:1
line con 0
line aux 0
line vty 0 4
login local
transport input all
line vty 5 15
login local
transport input all
scheduler allocate 20000 1000
endHello, and thanks for the good advice. I did try and added the cnf perphone command and ran no create cnf-files and then create cnf-files, but unfortunately its still not making them.
Also, from the other few CME installations I've seen, all of the information is in flash, but for some reason when I xtracted the tar for this CME, it's showing up in system: ? Could that be a problem? Here is what I see:
CompactFlash directory:
File Length Name/status
1 67922508 c2800nm-adventerprisek9-mz.151-4.M8.bin
2 85149696 cme-full-8.0.0.1.tar
3 2942935 apps11.8-5-3TH1-6.sbn
4 503269 cnu11.8-5-3TH1-6.sbn
5 2104751 cvm11sccp.8-5-3TH1-6.sbn
6 340615 dsp11.8-5-3TH1-6.sbn
7 1616686 jar11sccp.8-5-3TH1-6.sbn
8 670 SCCP11.8-5-3S.loads
9 674 term06.default.loads
10 674 term11.default.loads
11 1916 MISCH-1.3.3.SBN
12 900 CP7921G-1.3.3.LOADS
13 900 CP7925G-1.3.3.LOADS
14 674 term42.default.loads
15 674 term62.default.loads
16 670 SCCP42.8-5-3S.loads
17 655 term31.default.loads
18 654 term41.default.loads
19 654 term45.default.loads
20 654 term61.default.loads
21 654 term65.default.loads
22 654 term70.default.loads
23 654 term71.default.loads
24 654 term75.default.loads
25 651 SCCP31.8-5-3S.loads
26 650 SCCP41.8-5-3S.loads
27 650 SCCP45.8-5-3S.loads
28 650 SCCP70.8-5-3S.loads
29 650 SCCP75.8-5-3S.loads
30 61 SCCP69xx.8-5-3-0.loads
31 131470 Desktops/320x212x12/CampusNight.png
32 80565 Desktops/320x212x12/CiscoFountain.png
33 8156 Desktops/320x212x12/CiscoLogo.png
34 138278 Desktops/320x212x12/FOUNTAIN.PNG
35 740 Desktops/320x212x12/LIST.XML
36 109076 Desktops/320x212x12/MorroRock.png
37 108087 Desktops/320x212x12/NantucketFlowers.png
38 10820 Desktops/320x212x12/TN-CampusNight.png
39 9657 Desktops/320x212x12/TN-CiscoFountain.png
40 2089 Desktops/320x212x12/TN-CiscoLogo.png
41 7953 Desktops/320x212x12/TN-Fountain.png
42 7274 Desktops/320x212x12/TN-MorroRock.png
43 9933 Desktops/320x212x12/TN-NantucketFlowers.png
44 740 Desktops/320x212x16/LIST.XML
45 740 Desktops/320x216x16/LIST.XML
46 8224 Ringtones/Analog1.raw
47 8307 Ringtones/Analog2.raw
48 5280 Ringtones/AreYouThere.raw
49 5040 Ringtones/AreYouThereF.raw
50 8206 Ringtones/Bass.raw
51 12240 Ringtones/CallBack.raw
52 16066 Ringtones/Chime.raw
53 8160 Ringtones/Classic1.raw
54 16080 Ringtones/Classic2.raw
55 10800 Ringtones/ClockShop.raw
56 2823 Ringtones/DistinctiveRingList.xml
57 9665 Ringtones/Drums1.raw
58 13610 Ringtones/Drums2.raw
59 15928 Ringtones/FilmScore.raw
60 16244 Ringtones/HarpSynth.raw
61 8245 Ringtones/Jamaica.raw
62 16127 Ringtones/KotoEffect.raw
63 12776 Ringtones/MusicBox.raw
64 8223 Ringtones/Piano1.raw
65 15422 Ringtones/Piano2.raw
66 9360 Ringtones/Pop.raw
67 7200 Ringtones/Pulse1.raw
68 4000 Ringtones/Ring1.raw
69 4000 Ringtones/Ring2.raw
70 4000 Ringtones/Ring3.raw
71 4000 Ringtones/Ring4.raw
72 4000 Ringtones/Ring5.raw
73 4000 Ringtones/Ring6.raw
74 4088 Ringtones/Ring7.raw
75 495 Ringtones/Ringlist.xml
76 10858 Ringtones/Sax1.raw
77 14233 Ringtones/Sax2.raw
78 16100 Ringtones/Vibe.raw
79 8095286 apps37sccp.1-3-4-0.bin
80 2942935 apps31.8-5-3TH1-6.sbn
81 2935993 apps42.8-5-3TH1-6.sbn
82 2935993 apps45.8-5-3TH1-6.sbn
83 2935993 apps75.8-5-3TH1-6.sbn
84 2933329 apps41.8-5-3TH1-6.sbn
85 2933329 apps70.8-5-3TH1-6.sbn
86 2599169 APPSH-1.3.3.SBN
87 2591877 APPS-1.3.3.SBN
88 2118620 SYSH-1.3.3.SBN
89 2103754 cvm70sccp.8-5-3TH1-6.sbn [invalid checksum]
90 2101414 cvm41sccp.8-5-3TH1-6.sbn [invalid checksum]
91 2100804 cvm45sccp.8-5-3TH1-6.sbn [invalid checksum]
92 2100554 cvm75sccp.8-5-3TH1-6.sbn [invalid checksum]
93 2100286 cvm31sccp.8-5-3TH1-6.sbn [invalid checksum]
94 2099070 cvm42sccp.8-5-3TH1-6.sbn [invalid checksum]
95 2083047 SYS-1.3.3.SBN [invalid checksum]
96 1939872 WLANH-1.3.3.SBN [invalid checksum]
97 1906272 SCCP69xx.8-5-3-0.zz [invalid checksum]
98 1892036 GUIH-1.3.3.SBN [invalid checksum]
99 1887312 jar75sccp.8-5-3TH1-6.sbn [invalid checksum]
100 1882934 jar45sccp.8-5-3TH1-6.sbn [invalid checksum]
101 1848343 GUI-1.3.3.SBN [invalid checksum]
102 1828410 jar70sccp.8-5-3TH1-6.sbn [invalid checksum]
103 1756328 jar42sccp.8-5-3TH1-6.sbn [invalid checksum]
104 1628021 jar41sccp.8-5-3TH1-6.sbn [invalid checksum]
105 1616425 jar31sccp.8-5-3TH1-6.sbn [invalid checksum]
106 1379535 WLAN-1.3.3.SBN [invalid checksum]
107 939293 TNUXH-1.3.3.SBN [invalid checksum]
108 896477 TNUX-1.3.3.SBN [invalid checksum]
109 537925 dsp41.8-5-3TH1-6.sbn [invalid checksum]
110 537925 dsp70.8-5-3TH1-6.sbn [invalid checksum]
111 524969 cnu45.8-5-3TH1-6.sbn [invalid checksum]
112 524917 cnu42.8-5-3TH1-6.sbn [invalid checksum]
113 524876 cnu75.8-5-3TH1-6.sbn [invalid checksum]
114 503753 cnu31.8-5-3TH1-6.sbn [invalid checksum]
115 500084 cnu70.8-5-3TH1-6.sbn [invalid checksum]
116 499644 cnu41.8-5-3TH1-6.sbn [invalid checksum]
117 496521 music-on-hold.au [invalid checksum]
118 340615 dsp31.8-5-3TH1-6.sbn [invalid checksum]
119 340615 dsp42.8-5-3TH1-6.sbn [invalid checksum]
120 340615 dsp45.8-5-3TH1-6.sbn [invalid checksum]
121 340615 dsp75.8-5-3TH1-6.sbn [invalid checksum]
122 264368 DSP69xx.0-0-0-3.zz [invalid checksum]
123 165355 B016-1-0-3.SBN [invalid checksum]
124 146463 B015-1-0-3.SBN [invalid checksum]
125 44896 BOOT69xx.0-0-0-14.zz [invalid checksum]
126 11601 CME-8-0-Full-Readme-v.1.0.txt [invalid checksum]
127 5134 7970-71-75-Background-readme-v1.txt [invalid checksum]
128 1916 MISC-1.3.3.SBN [invalid checksum]
129 4118 GUI/admin_user.html [invalid checksum]
130 677820 GUI/admin_user.js [invalid checksum]
131 1029 GUI/CiscoLogo.gif [invalid checksum]
132 639 GUI/CME_GUI_README.TXT [invalid checksum]
133 953 GUI/Delete.gif [invalid checksum]
134 16344 GUI/DOM.JS [invalid checksum]
135 864 GUI/downarrow.gif [invalid checksum]
136 6315 GUI/ephone_admin.html [invalid checksum]
137 4558 GUI/LOGOHOME.GIF [invalid checksum]
138 3978 GUI/normal_user.html [invalid checksum]
139 78428 GUI/normal_user.js [invalid checksum]
140 1347 GUI/Plus.gif [invalid checksum]
141 843 GUI/SXICONAD.GIF [invalid checksum]
142 174 GUI/Tab.gif [invalid checksum]
143 2496 GUI/telephony_service.html [invalid checksum]
144 870 GUI/UPARROW.GIF [invalid checksum]
145 10230 GUI/xml-test.html [invalid checksum]
146 3412 GUI/xml.template [invalid checksum]
147 12 OS79XX.txt
148 130552 P00308010200.bin
149 461 P00308010200.loads
150 708448 P00308010200.sb2
151 130956 P00308010200.sbn
152 703535 cmterm-7940-7960-sccp.8-1-2.cop.sgn
[239789964 bytes used, 281983088 available, 521773052 total]
509544K bytes of ATA CompactFlash (Read/Write)
RtrPod2#show telephony-service tftp-bindings
tftp-server system:/its/united_states/7960-tones.xml alias United_States/7960-tones.xml
tftp-server system:/its/united_states/7960-font.xml alias English_United_States/7960-font.xml
tftp-server system:/its/united_states/7960-font.xml alias English_United_States/7920-font.xml
tftp-server system:/its/united_states/7960-dictionary.xml alias English_United_States/7960-dictionary.xml
tftp-server system:/its/united_states/7960-kate.xml alias English_United_States/7960-kate.xml
tftp-server system:/its/united_states/7960-kate.xml alias English_United_States/7920-kate.xml
tftp-server system:/its/united_states/SCCP-dictionary.xml alias English_United_States/SCCP-dictionary.xml
tftp-server system:/its/SEPDEFAULT.cnf alias SEPDefault.cnf
tftp-server system:/its/vrf1/XMLDefault.cnf.xml alias XMLDefault.cnf.xml -
HOW TO KEEP YOUR CURRENT CUSTOMER
THIS IS NOT EVEN AN IDEA. THIS IS JUST SIMPLE BUSINESS 101. I BROUGHT THIS ISSUE 2 YEARS AGO AND ENDED UP TALKING TO A NICE SUPERVISOR THAT UNDERSTOOD MY POSITION AND ENDED UP WITH THE SAME DEAL NEW CUSTOMER WILL GET FOR CURRENT CUSTOMER WHO WANTS TO RENEW THEIR CONTRACT FOR ANOTHER 2 YEARS!!!. AS WE ALL KNOW VERIZON HAVE A GREAT DEAL FOR NEW CUSTOMER BUT THIS DEAL IS NOT AVAILABLE FOR THEIR 2 OR 10 YEARS CUSTOMER THAT WANT TO RENEW THEIR CONTRACT????? I UNDERSTAND THE IDEA AND FINANCIAL PART OF DOING THAT BUT THEY ARE WRONG. BECAUSE MY 2 YEARS CONTRACT EXPIRED IN 4 MONTHS AND IF THEY DON'T GET ME THE SAME DEAL THEY ARE OFFERING TO THEIR NEW CUSTOMER, I WILL BE LOOKING FOR THEIR COMPETITOR. I MEAN THEY NEE DOT ADD IN THEIR DICTIONARY WHAT LOYAL CUSTOMERS MEANS OR LOOK INTO HOW TO KEEP YOUR CURRENT CUSTOMERS, I MEAN I MIGHT NOT EVEN CARE IF THEY STOP SENDING ME ALL THESE ADS ALMOST EVERYWEEK ABOUT ALL THESE GREAT DEALS NEW CUSTOMERS GET, I FEEL LIKE CHEATED....BY THE WAY, I HAVE BEEN WITH VERIZON FOR 6 YEARS NOW....AND I AM CERTAIN, I AM NOT THE ONLY ONE, IF YOU ARE CURRENT CUSTOMER LIKE ME YOU WILL CERTAINLY WILL AGREE IF YOU SEE WHAT THEY ARE OFFERING TO NEW CUSTOMER....YOU WILL FEEL LIKE BETRAYED.....
agee66 wrote:
... Why treat long time loyal customers who want to re-up with Verizon worse than potential new customers? Discounts should be for all customers, especially long time loyal ones
If everyone gets the same low prices, all of the time, forever, then what exactly is your definition of "discount"? -
"Can't open your current phone library using this version of iPhoto"
I installed iLife '09 on 12/17 and was able to use iPhoto up until last night when all of a sudden it said "The Photo Library needs to be upgraded to work with this version of iPhoto" so I clicked "upgrade" and received the following message:
"You can't open your current photo library using this version of iPhoto"
Please help!! how come all of a sudden I can't open iPhoto???
thank you!Welcome to the Apple Discussions.
This is sometimes a symptom of a damaged database.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
Can you add a second phone number or line to your current account on an iPhone 5s?
Can you have a second phone number or line to your current account on an iPhone 5s?
If the carrier allows call forwarding, you can forward calls from one number to another.
No iPhone supports dual SIMs. -
By deleting texts on your phone does that delete them on your computer?
Well my sister got a new Mac. Book and she lets my family use it. So on my account I signed in For the iMessage and I was wondering if deleted texts onmy iPhone would they go away on the computer because I don't want them reading my texts.
no, deleting a text on your iPhone (one which is sent or recieved from iPhone to iPhone), will not delete it from "Messages" on the Mac, you need to delete it from Messages on the Mac as well.
-
Importing into Address Book with Custom Fields from a Text File.
Hello
I'm a teacher and like to create contacts for my students. The information that I want in each contact besides their name, email address and phone number are their
student id's, semester enrolled, class number and class title. For these four fields I create a "Custom" field with the appropriate names: "ID", "Term", "Course" and "Class" respectively.
All this information I can download from the school's server in a CSV file.
To import the information into Address Book, I choose "File -> Import -> Text File" and then select the CSV file that I downloaded. The import utility opens up correctly showing all the fields I would like to import, however, many of the fields are marked as "Do not import." When I click on that term to select my Custom fields, they do not show up. Is this a bug or "feature" of the Address Book? It seems to me that if you are allowed to create useful custom fields, you should be able to import data into them as well.
If I'm just ignorant of how to do this, I would appreciate some help. If there is no way to currently do this efficiently, it would be nice to have this feature added to the Address book in the near future.
Thanks for your consideration,
GaryThanks for posting your question and the reply from rojok...
I'm a teacher as well - in Entourage I was able to just copy a column of email addresses (say from an Excel spreadsheet, downloaded from the school's server here at U MD) and then create a group and simply paste that list into the group. Address Book makes you do the extra step of importing all the addresses first. (Note: Your last imported list of contacts in this manner shows up as "Last Import" in the groups lists column to the left in Address Book - so to add contacts to a Group there, you select that Last Import group, click once in that list column one contact, say, then select all of the list - then Command + A, for select all - then drag them all to your group you've made - i.e. "MySpringClassList"). This is NOT very intuitive I might add and incredibly cumbersome of a process.
To get around the customizable info I needed to import... I just chose options that I don't regularly use for those things I needed to import - i.e. student I.D., these I placed under "ICQ Other" - that way they're imported at least.
Good luck,
Andrew
Maybe you are looking for
-
Hi, I need to keep check point in me21n t.code, (i.e) when user save or checks the PO is should check whether GE-Bsd IV field is ticked for Domestic PO. in MM06E005 exit, i used fm EXIT_SAPMM06E_012 DATA: IT_HPO TYPE MEPO1222-EKORG, "Pur. Org.
-
Java Plug-in 1.4.2_01 error
Hi, Sometimes when I access certain websites with java programs I get the following pop-up error "Java Plug-in 1.4.2_01 is not installed properly". It then asks if I would like to open a new browser as the one I'm using apparently won't support the v
-
Af:commandMenuItem action only works first time
I am using the af:panelPage, and have added a menu1 facet that contains an af:menuTabs component with 3 af:commandMenuItems. I'd like the selection of each tab to invoke a bean 'action', where I'll set some flags that control the rendering of differe
-
Rounding a duration to nearest 30 min?
I've been scanning the forums for information on rounding a duration to a fixed number of minutes, such as a quarter of an hour or 30 minutes. Arbetad tid, januari Datum Start Paus Total tid 30-min-avrundat 7-jan-13 8:00 16:27 0:30 7:57 In this examp
-
OPMN: Discoverer does not start
I installed IAS 10.1.2.0.2 in a Suse 9 w/SP3, and I get the following error when running opmnctl startall: ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ias-component/process-type/process-set: Discoverer/ServicesSta