Custome Extractors queue - Please help

Hi,
We have three custom extractors. Where can we find the queues of the same in R/3 system?
I have checked in RSA7, But, i am not finding the queues..Please help urgently. Thanks.

Thanks Ajay.
Yes, All of our custom extractors are delta enabled. But, I am not seeing them ( delta pointers) in RSA7. We have been running this for the past 2 years..
Is there any way to check the all data sources of these customs extractors in R/3?
Most of the custom extrator jobs are having some program associated with different variants. In that case, how to get the datasource name in R/3?
I even checked with SMQ1..I am seeing these queues..I am not to understand this? Is this the LOs?
MCEX03
MCEX05_1
MCEX08
MCEX11
MCEX13
MCEX17
MCEX17_1
Thanks for your help.
Message was edited by:
BW USA

Similar Messages

Motion 5 not allowing me to save custom transitions. Please help.

How can I create custom transitions for Final Cut Pro X. Motion 5 is not allowing me to save custom templates. I have followed the instructions in Motion 5 user manual...but, it's not working. Please help. When I create a category, it reverts to a blank line. I'm unable to publish the transition.

Check Settings>General>Restrictions> Location Services>make sure is set to "Allow Changes"

Please help me to clear my iTunes Store download queue., Please help me to clear my iTunes Store download queue.

Please help me to clear my iTunes Store download queue.

Finally, I got it.
After spending most of Friday night on the issue, I found the following at ...
http://support.apple.com/kb/ts3297
Obviously, some srewed up downloads have been sitting in the download folder and causing a) crashes at start-up (since itunes will try immediately to continue the download after start up) and b) avoiding anything else to be downloaded (seems to be a kind of "first come- first to be downloaded"-arrangement).
I found several "downloads"-folders using Spotlight. Most likely, because I moved the iTunes library to access it from my account as well as from the account of my wife (at the same computer). I deleted all those downloads-folders and ... voila .. suddenly the downloads continued. Funny, that there have been more conflicts in the queue of app 20 files to be downloaded. Means, I could download 5 and the problem came back. I repeated the procedure and could continue with the remaining 15 files.
After all, iTunes' download behaviour is back to normal. Songs, movies, apps, podcasts can be downloaded without any issue.
Stefan

Creating a custom datasource. Please help!

Hi Experts,
I'm creating a custom datasource in RSO2 to extract data from a custom view based on three z tables. I have filled the view with the join conditions and the fields. After activating it, I have checked the data and it's correct. The problem appears when I try to create a custom datasource based on this table, the following error appears:
Invalid extract structure template ZXXX of DataSource ZXXX.
You tried to generate an extract structure with the template structure ZXXX. This operation failed, because the template structure quantity fields or currency fields, for example, field AMOUNT refer to a different table.
I have checked the quantity and currency fields in order to add the reference tables and fields. For example:
0AMOUNT: ref table: EIPA; ref field: BWAER.
The problem is that I don´t know how to join both tables (EIPA and my Zview) because the key is different in the tables and only non relevant fields like Net Price appear in both tables.
If I add only the field EIPA-WAER, the data selectedis not correct, obviously.
Please, what can I do? Any ideas?
Thanks in advance! Any help will be more than welcome. Thanks!

Hi all,
I have created an Infoset but the problem persists. If I only join the tables I need, when I generate de Infoset, a warning appears telling that some fields (currency and quantity) will not be filled. At this point, if I execute de datasource in RSA3, the number of records is correct but these fields are empty.
If I add the tables that appear in the warning message, the number of records extracted is 0, because these "auxiliar" tables only contain information about currency units but they don't have the same key values so thay cannot join.
I have a question now... the tables that I have to upload into BI are also Z Tables. What happens if I ask my development team to add currency and quantity units in these tables? I think my problem will be solved if unit fields appear in the original tables. Would it be enough?
Any suggestions on it?
Thanks in advance!
Edited by: Iñaki Rueda on Dec 29, 2009 12:02 PM

Does Inprise 4.1 support Custom Tag? Please Help!

Hi there
Does Inprise 4.1 support Custom Tag? If so, could you please tell me where to place the .tld file and the classese or just tell me where to find information about that.
Thank you very much!
From
Edmund

Please help!! I still can't work it out...

Error creating Customer Exit variable, please help

Hi Experts,
This is the scenario, I need to obtain the convertion rate from the table TCURR in order to convert several currencies to USD, so I created a Customer Exit variable that gets the Period and based on that obtains the conversion rate for the last day of the given month from TCURR, the problem is when I created the Formula Variable to get the value from the Customer exit variable I got the following error:
'ZVARREGEXIT' ALREADY EXISTS; SELECT A DIFFERENT NAME.
But in not using that name anywhere on my variables creation, Im doing something wrong? How can I check wheres is that variable being used.
Ideas, comments are always welcome and appreciated.
Regards.

Hi Ed,
Open Admin Workbench (RSA1) and choose Transport Connection --> Object Types --> Query Elements --> Variable --> Select Objects. Find the variable of interest and transfer it back to the main screen, then right-click and choose 'Display Description'. That will show you a "where used" list of queries, workbooks, etc.
Next, you can use the previous technique to open one of the queries, find the variable in the query, and determine which InfoObject it is associated with.
Hope this helps!
Regards,
Saurabh

Nested Tables and Advanced Queues- Please Help.

How do i work with NestedTable type and Advanced Queue.
I have done the following
I have Oracle 8.1.7 enterprise edition.
create type myType as TABLE OF varchar(32);
create type myObject as OBJECT (
id int,
myt myType);
DECLARE
BEGIN
dbms_aqadm.create_queue_table(
queue_table => 'my_queue_table',
multiple_consumers => TRUE,
queue_payload_type => 'myObject',
compatible => '8.1.3'
END;
The Nested Table and Object are created successfully.
but the queue is not created.
I get the following message.
DECLARE
ERROR at line 1:
ORA-22913: must specify table name for nested table column or
attribute
ORA-06512: at "SYS.DBMS_AQADM_SYS", line 2012
ORA-06512: at "SYS.DBMS_AQADM", line 55
ORA-06512: at line 3
I know how to specify the nested table storage clause for
create table statement, but there is no provision for
it in the create_queue_table procedure.
Any help will be greately appriciated.
i have already created and tested aqs with simple data types,
also i have created simple tables with nested table type
elements.
but the combo of Nested tables and AQ is not working.
thanks in advance.

Hi Francois. Thank you very much for your reply, but it seems that i still get errors. So let me tell what i have done.
As you suggested me: i have done a block based on a sub-query for the nested-table:
'select courses from department where name= :department.name'.
In the master block(department) i have the when-new-record-instance trigger:
Declare
LC$Req varchar2(256);
Begin
LC$Req := '(select ns.courses from table
( select courses from department where name = ''' || :DEPARTMENT.name || ''' ) ns )';
Go_block('block11');
Clear_Block ;
Set_Block_Property( 'block11', QUERY_DATA_SOURCE_NAME, LC$Req ) ;
Execute_query ;
End ;
Now the errors i receive, this time in the runtime mode are:
- FRM-41380: Cannot set the blocks query data source
-FRM-41003: This function cannot be performed here.
Since it seems that you know how to work with the nested table i would really appreaciate your help. I am new in the nested table and if you could give an ex with my tables it would be great.
Thank you in advance.

I need a number for customer service! Please HELP.

I bought photoshop elements from best buy. I put in the code to retreive serial number. Message to contact customer service, I've been all over this website and can not find a number to contact them. HELP.!!!!

The iTunes Store does not have phone support. Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report your issue to the iTunes Store.
Regards.

IPhone 5 and Verizon customer Service Nightmare Please help!

I need help with Verizon customer service. I would like to know if I am being unreasonable. Here is my story. I ordered an iPhone 5 from apple to add to my Verizon account. This will be my fourth line of service with Verizon. I spend over 200 dollars a month with Verizon. I ordered the iPhone on the first day it was available to order. I received my iPhone on Tuesday 9/25/12. The nightmare begins. I call Verizon customer service to activate service. I get bounced from department to department because they are unable to activate my phone. This goes on for about an hour. I then get to a nice young lady that was very friendly and worked hard to try to help me. We spend for hours on the phone speaking to all of her different departments and even calling apple care and apple directly. The problem is Verizon set my new line of service to start in the middle of October. After about 4-5 hours on hold with customer service I am told they can't activate my new phone until the middle of October because when the order was placed they set up my activation date wrong. They went on to tell me they could do nothing more and transferred me to apple as they said only apple can fix the problem. I spend the next two hours on the phone with apple. Apple class all their tech support and calls Verizon back and explains my phone is a working phone and Verizon is the one providing the service so this is definitely a Verizon issue. I am advised by apple that I need to call Verizon back to fix. At this point Verizon is closed as I have been on hold with reps past closing time. I call back to Verizon and get a really helpful customer service rep the next day. Spend two hours on hold with him and he gets my service turned on. He states they should have been able to help me with this yesterday and apologized to me. He advised I would have to call back the next day to change my phone numbers around. Total time invested today 2 hours. Total time invested so far over 8 hours. I call back the next day to get my numbers moved around. Takes about an hour. When we are done I ask if I can get a credit on my next bill for having to spend over 8 hours on the phone to fix Verizon's mistake. I am transferred to a very condescending manager who laughs at me and tells me in essence they don't care about my time. He offers me one day of service credit. I advise him this is unacceptable. He gives me an analogy that this is like me getting my electric turned off for not paying and then wanting a credit for the time it took to turn back on. He even laughed at me on the phone and told me he wasn't going to do anything. When I asked to speak to a higher up manager I was told no. My question is who do I advise to get this rectified, and is it unreasonable to expect a credit when I spent over 8 hours on the phone with Verizon to correct their mistake? Pleas help!

Yes, don't feel it is as black&white as other posters here, but it is impractical.
What is the value of your time for example? If you are not self-employed, were you still being paid during these 8 hours. A court would consider actual economic loss, did you lose money during these 8 hours? And do you/your employer pay customers in similar situations? In my experience, you get credit based on the service (e.g. the 1 day credit) rather than being paid for your time.
And on the flip side, if I call up Verizon complaining that my phone doesn't work, and it turns out that I had forgot to charge it, do you want to be billed for the rep's time when it was your mistake? (Of course, wireline DOES do this, if Verizon dispatches a repair tech and the fault is inside your house etc (without a wiring contract) you do get charged)
Certainly the one day credit is the minimum they should provide. As others have said, your real recourse is to return the phone.

Using Panels in Custom Cell Renderers.Please Help

CHAPS.
I wud like to use a JPanel in my custom cell renderer
to return back the number of items in my list.
So i want the display to be this:
1 Java
2 C++
3 Cobol
I wud like to use JPanel as the label can contain other components.
But I am not getting the concerned output.
Can someone please tell me where I have gone wrong
I HAVE ALSO POSTED THIS IN THE JAVA PROGRAMMING FORUM
PLEASE DONT GET OFFENDED AS I AM EXPECTING AN URGENT
RESPONSE.
Attached is my code
class TestPanel extends JFrame {
     TestLabel() {
          JList list = new JList(new Object[] { "Java", "C++", "Cobol" });
          list.setCellRenderer(new MListCellRenderer());
          getContentPane().add(list);
          pack();
          show();
     public static void main(String[] args) {
          new TestLabel().setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
class MListCellRenderer implements ListCellRenderer {
     private final JLabel label = new JLabel();
     private final JPanel panel = new JPanel();
          panel.setOpaque(true);
     public Component getListCellRendererComponent(
               JList list, Object value,int index,
               boolean isSelected, boolean cellHasFocus) {
        label.setText("No" + list.getSelectedIndex());
     panel.add(label + " " + value.toString());
     return panel;
}

I HAVE ALSO POSTED THIS IN THE JAVA PROGRAMMING FORUM PLEASE DONT GET OFFENDED AS I AM EXPECTING AN URGENT RESPONSEWell, someone has probably already answered this question in the Java forum, so I won't waste my time and answer it again here.

Using JScrollpane via Custom Cell Renderer.Please Help

Chaps,
I have a question regarding scrolling of a JList.
I have written a class (FTRDList) that has an Custom Cell Renderer.
I want the list to be scrollable.
This class is being called by many other classes.
Now,as the FTRDList class is being called by many classes,i need
to have all these classes to have the flwg statement
add(new JScrollPane(FTRDList)),BorderLayout.CENTER);
This can be a lot of work to chaneg all classes
Rather,is it possible to have the JScrollPane built in the
FTRDList class once and for all and let all classes call
it by
add(FTRDList,BorderLayout.CENTER);
Please can anyone tell me how to make the FTRDList class Scrollable?
Or is this not possible at all?
Attached is the class:
public class FTRDList extends JList {
    /* Inner class for Custom Cell Renderer */
    class MyCellRenderer extends JLabel implements ListCellRenderer {
    public Component getListCellRendererComponent(JList list,
                                                  Object value,            // value to display
                                                  int index,               // cell index
                                                  boolean isSelected,      // is the cell selected
                                                  boolean cellHasFocus) { // the list and the cell have the focus
            setText(value.toString());
            if (isSelected) {
            setBackground(isSelected ? Color.red : Color.yellow);
         setForeground(isSelected ? Color.white : Color.black);
            setEnabled(list.isEnabled());
            setOpaque(isSelected);
            return this;
    public FTRDList() {
        super();
        setSelectedIndex(0);
        /** Invoke the cell Renderer */
        setCellRenderer(new MyCellRenderer());
        setOpaque(false);

I HAVE ALSO POSTED THIS IN THE JAVA PROGRAMMING FORUM PLEASE DONT GET OFFENDED AS I AM EXPECTING AN URGENT RESPONSEWell, someone has probably already answered this question in the Java forum, so I won't waste my time and answer it again here.

License Transfer and Customer Support Nightmare - Please help.

I have purchased a copy of Creative Suite and am trying to get the license transferred.
I have been promised 3 times now via live chat that it will go through yet obstacles keep popping up.
Initially the case was closed so I was unable to upload my recipient end of the transaction. Then I was told it was re-opened but that that the current license holder had to upload both forms.
I have kept all of the chat transcripts so this is what was said:
"******you have to contact ****** and mail your form to him and he will attach the form containing your details . And then we will be able to authenticate that and then transfer the details."
He has done so and has now been sent the following email (all names and case numbers removed)
Adobe Case Update
Your Adobe ID*******
Your Case Number:******
Case Description:Transfer of license
Hello ******
Thank you for contacting Adobe.
We understand that you wish to transfer an Adobe license to a different user. We　have received the Transfer of License form that you have submitted. We appreciate for taking your time to attach the required document. However, we regret to inform you that, we are unable to process further with the transfer of license, since there is no case created and Transfer of license form submitted by the recepient under his account. Please be informed that in order to transfer an Adobe license the Transferor and Recepient needs to be submit the TOL form from their own Adobe account. The Transferor cannot submit both the document.
Please refer the below given link for more information on Transfer of License.
URL: http://helpx.adobe.com/x-productkb/policy-pricing/transfer-product-license.html
For more information on Adobe products or services, visit us at www.adobe.com. For Adobe Support contact information, visit www.adobe.com/support/contact
Please let us know if you have any questions or concerns. Your identification number is *******
This email is in response to support case #********* submitted by********
To respond to this update or review your case history, log in to the Adobe Support Portal online and look for your case number in the "recent activity" section. Should you need to send us additional information, you can do so by opening the case and submitting your update.
If you have difficulties logging in, consult the Adobe ID and Membership FAQ.
Thank you,
Adobe Customer Care"
It turns out that a completely new case number has been assigned when I was told it hadn't.and that, as I initially thought, I need to send them my form as the recipient but am unable to do so because the case is not listed on my Support Portal case list.
Can somebody PLEASE tell me how to make sure that Adobe have both forms attached to the same case No. so that this issue can be resolved. It is becoming a little Kafkaesque.
Many Thanks,
Gregor Samsa

After another hour I found how to chat to an actual person.
So if anyone wants to avoid the circles try here:
Adobe ID, sign-in, and account help

Is there another option if you forget your answers to your security questions besides calling customer support. Please help I'm very awkward to explain things and especially over the phone.

what to do if you forget the answers to your security questions?

If you didn't set up a rescue email address you'll have to call them.

Sharing variables between 2 custom components. Please help.

Hi,
I'm a beginner in java and I have a problem. I'm using Netbeans 5.5.1
I need to use 2 classes, defined in 2 separate files, in a third, main class.
Actually I copy/paste the 2 classes (are made as swing jpanels with controls, textboxes, combos, etc) in the main class, so in the main class they appear as components.
what I need is to read a combo box from first component every time when it is updated and use it in second component , when a buton from second component is pushed.
I don't know haw could this be done.
Thanks,
Dan

http://en.wikipedia.org/wiki/Model-view-controller
What you need is a controller. Let your gui classes do nothing but interact with the user and tell the controller class when they do something (like push the button on the second component). Then the controller gives the guis their updated data to display.

HT5704 please help me why i cant continue updating my iphone?

Hi, I try to upgrade my iphone 3GS version 4.1 to become 6.1, I download the itunes then now why its cannot continue updating my iphone? always says that we are sorry, we are unable to continue activation of this time. Please try again later or contact customer care. Please help me for this problem.

Most likely, your phone was hacked to carrier unlock. When you updated, the hack was removed and the phone is now re-locked to its original carrier. It will now activate and operate only with that carrier, using their SIM card

Custome Extractors queue - Please help

Similar Messages

Maybe you are looking for