Customer Account group Change- XD07
HI gurus,
I created a cistomer in Ship to Party account, but when i try to change the customer group(XD07) to Sold to Part the below error is coming.
"The planned change is not allowed as the following field
groups would be masked by the new account group"
May i know what is the solutin.
Cheers,
Sumith
Hi sumith,
This is warning message only it will not a problem.
What the message you are getting that is information only.
Just you select the tick mark and you can proceed.
it is not a error.
If it is useful reward points
Regards,
Manoranjan
Similar Messages
-
Reg : Customer Account Group Change
Hi Dear All,
Can any one Tell me that what effect will be there if i change the Customer account group from 0001-sol to party to EXPO-acc gr for Export customer.
As the customer is old and by mistake it has been created in 0001 instead EXPO acc group.
i need to know that what will be the effect on all sales data and accounting documents created already for that customer .
This i have to do for around 1500 records
pl suggest me the probable effects for the same.
ok thanksHi sunil,
You can change Account Group of a customer at any time. Its not going to effect the previous records.
But once after changing the Account group, what ever you customers you create will follow the new account group procedure.
But the thing is, if you want to process the old account group customers, must check that the corresponding fields are active / already in use or not. For example if you dont maintained one field in old account group customers and now with new account group if you want to process with that field, then you have to go the change mode and maintaine those field for all those customers which are not maintained earlier.
Like this if you can check the change in the Fields from old account group and new account group, then there wont be any problem.
Hope this gives you some idea.
REWARD IF HELPFUL.
Regards,
Praveen -
FI Experts,
I created a new customer thru XD01, and by accident I chose the wrong Account Group. How can I change it?
Thank You for your responseHello,
You can change it through XK07. The vendor number will be same but the vendor groups gets changed.
Regrds,
Ravi -
Hi Experts,
We have two different account groups with different number Ranges. When i try to change the customer account group from one to other through XD07 system given the following warning message.
Customer 600021 not in External Sold-to-Party
- number range 0000100001-0000199999
Message number F2691
We have tried to change this warning message in to Error message through OBMSG and OBA5
after that also system showing warning message.
Where we do mistake? is there any other process to do the changing message?Hi,
If You are trying to change the account group of a customer whose partner function is Sold-to-party.
Changes to the account group and the relevent partner functions only made from lower level to higher level.
Example:
Sold-to-party cannot be assigned the function of a payer(Higher level to lower level) because you are trying to change the higher level partner function.
Your can assign sold-to-party function to a payer (Lower level to higher level) because you are trying to change lower level partner function.
Regards,
Krishna Kishore -
Change of Customer Account Group
Hai Friends
I want to change my customer from ship-to party account group to sold to Party account group.
Please help in solving this issue.
Regards
Srinivasa Raohello, friend.
definitely you can use XD07 to change customer account group, as the others have said. but if you encounter some problems, most likely you have to check if the field statuses (mandatory, optional, suppress) are configured the same for the old and target account groups.
also, the SAP system default allows you to change account group from ship-to to sold-to, but not the other way around especially if you already have transactions for a customer as sold-to.
regards. -
Change contents of T077X (Customer Account Group Names)
Hi,
I have copied an existing account group to create a new account group. When i go to the table T077X, it is showing valid description in EN language. In other languages, the table shows the old account group description. May i know how to change the content of this table?
Thanks
VenkatHi SAP User,
You have to translate the descriptions. However, the translation process is different for customer account groups than for other configuration objects (I never understood why BTW). You can maintain the translations directly in SE16, table T077X, menu 'Table Entry' / 'Change' (F6).
Bernhard -
Change from Internal to External Number range for customer account group
Hi,
We would like to change the number range assignment for a customer account group from internal to external. The external number range assignment check box is greyed out as a few numbers in the range have already been used up. We want to do the internal to external assignemnt change, create a customer of a specific number, and revert the range back to internal assignment. Is this possible?
Appreciate your help.
RamHi,
Please do the below steps:-
(1) Go to XDN1 and click on "Maintain status" button. Note down the current status and change the status to zero. Save.
(2) Again go to SDN1 and click on "Maintain No. Range" button, and change the no. range to external. Save. (if that number range is maintained for multiple years, then make it external for the first yer and for the subsequent years, it will become automatically.)
(3) Then create your customer with specific number.
(4) Then go to XDN1 and click on "Maintain No. Range" button, and change the no. range to internal. Save. (if that number range is maintained for multiple years, then make it internal for the first yer and for the subsequent years, it will become automatically.)
(5) Again go to XDN1 and click on "Maintain status" button. Maintain the current status as the number noted down in step (1) above. Save. (In case number created in step (4) is greater than the number notes in step (1), maintain the number of step (4) in current status.)
Regards,
Gaurav -
Hello,experts.
can I modify customer accout group?
when I use tcode xd07 to modify it ,the message is :
Customer 900905 test
Account group one-time customer
must be maintained after the account group has been changed
follow after is a table strip with sales structure.
Customer can be blocked manually up to this point.
and the result is not changed.
what does it mean?
how can I modify the customer account group?
pls help me out.hi
A D120 Control 037 County Code, City Code
these fields are not there in the account group for which u r trying to change
So goto OBD2 and select your target account group which you want to modify and check whether the fields
county code and city code are suppressed make the required or optional
then you can modify the account group
BOTH the source account group and Target account group should be similar in fields and views then only you can modify
regards -
Credit contorl of Customer Account Group
Dear All,
My exact requirement is we are going to create a New Customer Account Group. Whoever the customers are there in this customer group the CREDIT LIMIT should be One Rupee as a default. It should not be changeable.
Whenever User wants try to change the Credit Limit system should not allow.
Is it possible by transaction Code FD32 or is there any other way?
Kindly help me out.
Thanks & Regards,
YadayyaDear Farooq,
It seems it may useful to resolve my requirement. But i am not able to understand how to do the configuration before asking Basis person.
My requirement that restriction should be applicable to all the customers who will come under one Customer Account Group which we are going to create as new. IT SHOULD NOT EFFECT OTHER CUSTOMER ACCOUNT GROUPS.
Kindly explain me clearly so that i can resolve my issue.
Thanks for your kind help.
Thanks & Regards,
Yadayya -
Customer Account Group Number Range
Hi Guru's,
The Customer Account Group Number Range has currently taking 10 digits. But my client wants to be 12 digits.
Could you please guide me, to do the necessary setting for the same.
Kindly suggest.
thanking you,
regards,
SreeniDear Sreeni,
You can't change standard customer no range flied width.
You can create a new ZTABLE with 12digits.
regards
natraj -
Link Recon account to customer account group
hi guys,
Where do we link a reconciliation account to the customer account group?
thanks
srik.We do not link recon account to the customer account grp.
account group controls
1) the interval for the account numbers
2) whether the number is assigned internally by the system or externally by the user (type of number assignment)
3) whether it is a one-time account
4) which fields are ready for input or must be filled when creating and changing master records (field status) we control the field of recon account from the account group.
we will assign the recon acc when creating a customer master data so that
(When you post to a customer account, the system automatically makes a corresponding posting to the appropriate reconciliation account in the general ledger. This means that it is no longer necessary to transfer the figures from the sub ledger accounts to the general ledger before creating the balance sheet.) -
Vendor/Customer Account Group and Master Records
Hi Gurus,
Please tell me during implementation Vendor/Customer account groups and Master Records will be prepared by FI Consultants or MM, SD Consultants?
Waiting for reply
ThankYOuDear Verma
It is the usual practice that FI consultants should prepare Account group and also maintain General data and Company code date in Vendor/Customer masters. SD and MM consultants are informed by FI to maintain Sales and Purchase organization respectively by SD and MM consultants.
If this helps please reward with points.
Best Regards
Kesav -
Customer master Query report doesnt pick all the customer account groups
Hello experts
We have a custom Query report created using customer master tables KNA1,KNVV,KNB1 etc. We have customers maintained under 5 customer account groups. One of the selection fields in the query is account group. But it displays customers only in 4 of the 5 account groups for some reason, even though we have customers maintained in that group(prospective customers).
Any reason why this could occur? How do i ensure that customers from all account groups are visible?
Thanks in advanceHai Ravi
In SAP query if you join
KNA1 - KNB1- KNVV
General - Sasles data - company data
May be your 5th Account type is created without company code data.
The query will display only if the data is linked in all tables.
In case if you don't have company code data but you want the details of the account group customer
In the query join screen.
Right click on the joining line between KNB1 and KNVV and select Left outer join.
Now run the report , it will show all the account group data.
Regards,
Mani -
Restructure Customer Account Groups and Number Ranges
We already have existing customer account groups and number ranges and therefore customer accounts.
We need now to restructure Customer Account Groups incl. number Ranges and Number Range Allocation.
Is this possible? Any advice?
Can a customer keep is old customer number and be assigned to the new customer account group, which has a different number range?
Please adivse.
Many thanks
PetraRavi,
thanks very much for your reply. This information is very useful.
Just one more question:
WIth which Customer Number will reallocated customer end up? the originial one or does the customer get a new number relating to the number range of its new customer account group?
Many thanks,
Petra -
What should i take for customer account group
wat is the best to customize customer account group
i m thginking to creat one exportcustomer and other one is domestic
or else i ll make one one as sold to party
plz help<i><u><b>Customer Master</b></u></i>
<u><b>Account Group</b></u>
<b>Maintain Number Range for Account Group</b>
Use
The purpose of this activity is to control number range of Account Group.
Procedure
Access the activity using one of the following navigation options:
IMG --> Financial Accounting (New)  Accounts Receivable and Accounts Payable  Customer Accounts  Master Data  Preparations for Creating Customer Master Data  Create Number Ranges for Customer Accounts  Select the Icon to maintain Number Range
Transaction Code SPRO
Data to be maintained:
No | From | To | Current No | Ext (Tick in Check Box)
01 | 0000000001 | 0000099999 | 0 | No
02 | 0000100000 | 0000299999 | 0 | No
XX | A | ZZZZZZZZZZ | Yes
<b>Assign Number Range to Account Group</b>
Use
The purpose of this activity is to maintain number range of Account Group.
Procedure
Access the activity using one of the following navigation options:
IMG --> Financial Accounting (New)  Accounts Receivable and Accounts Payable  Customer Accounts  Master Data  Preparations for Creating Customer Master Data  Assign Number Ranges to Customer Account Groups
Transaction Code SPRO
Data to be maintained:
Group | Name | Number Range
0001 | Sold-to party | XX
0002 | Goods recipient | XX
0003 | Payer | XX
0004 | Bill-to party | XX
<b>Define Account Groups with Screen Layout (Customers)</b>
Use
In this step, you determine the account group of the customer.
Procedure
Access the activity using one of the following navigation options:
IMG --> Financial Accounting (New)  Accounts Receivable and Accounts Payable  Customer Accounts  Master Data  Preparations for Creating Customer Master Data  Define Account Groups with Screen Layout (Customers)
Transaction Code SPRO
The groups indicated below are a few examples. There are many groups in Standard SAP & if we require additional Group, it can be copied from appropriate group & maintained.
Group | Name
0001 | Sold-to party
0002 | Goods recipient
0003 | Payer
0004 | Bill-to party
0005 | Prospective customer
0006 | Competitor
Select Sold-to-party  go to Details  Double Click on General data / Company code data / Sales data. It will take to next screen which details Tab Pages of General data / Company code data / Sales data. Double Click on Tab Page for example: Address, Control, Marketing & so on. Here you can maintain whether the field is to be Suppress, Req. Entry, Opt. entry or Display
Regards,
Rajesh Banka
Reward points if helpful
Maybe you are looking for
-
HT4759 How do I get my calendar to Sync across my iPhone, IPad & Mac ?
I recently upgraded to Maverik. I used to be able to Sync my Calendar on my IPhone, IPad and Mac under Itunes. Maverick does not give me this option under Itunes, as it me be done in ICloud. ICloud is not syncing my calendat across all devices.
-
"Start Bar" or "Action GoMac" way to access Hard Drive in Dock
In Tiger, I was able to drag my hard drive into the dock (right hand side), and from then on it had the terrific click-hold feature of being able to scroll through my hard drive. This is similar to the "Action GoMac" and Windows "Start Bar" features,
-
Can't get my yahoo email to work
Hi there,After the battery of my 9360 Blackberry died, I just bought a new 9720 two days ago in Dubai, thinking that I can just put the same SIM card (from the 9360) of my home mobile provider SwissCom into the new 9720, and that I can just continue
-
Account receivable summary report by day
Hi expert, Is there any reports in SAP that can show account receivable by each customer by day? i.e. Customer A 1 Oct: 1,000 2 Oct: 2,000 3 Oct: 1,500 Customer B 1 Oct: 3,500 2 Oct: 2,000 3 Oct: 4,500
-
[Help] - Deploy the Discussion generates error in a production environment
Folow the error: AxisFault faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Client faultSubcode: faultString: Fault: java.lang.NegativeArraySizeException faultActor: faultNode: faultDetail: {http://xml.apache.org/axis/}stackTrace:Fault: jav