Customer address report

Hi,
Is there a transaction to get all the customer addresses in a report? For example, customer number and customer address.
Thank you.
Hakan

Hi,
In the KNA1 table get the ADRNR which is the Address number
Now goto the table ADRC with the ADRNR and get the customer address like Name1, Name2,...
Pleaes check and revert if you need more details
regards,
santosh

Similar Messages

Customer Receivable Aging report - customer Address

Hi ,
when i am doing print preview by using the selection one customer per page and i have captured customer address also now i want the customer address to reflect on every page as same of customer.
Thanks & Regards-
Monica Karani

It is not possible to include customer address in the B1 aging report. You must customize the report using crystal report or microsoft reporting service.
JImM

Shipping customized BOL report needs to be printed from 'Print BOL' button

Hi All,
We have requirement whereby
Our customized Bill of Lading (BOL) report should be printed when ‘Print BOL’ button is clicked on shipping transaction form. Can this be achieved with any setup change? (we would like to check this option before going for customization)
Our customized BOL report is ready and as of now we print it by manually submitting concurrent request. As of now clicking ‘Print BOL’ button submits Oracle seeded/standard BOL report.
(Oracle EBS R12.1.3)
Thanks
SidK

This is the Acrobat.com forum. Your question will have a much better chance being addressed in the Acrobat SDK forum.

Customer Master Report needed for jurisdiction, tax code, and district

I am trying to pull a customer master report and need to include the following fields:
Name (NAME1)
Account (KUNNR)
Jurisdiction ( TAXJURCODE)
Tax Code (TAXKD)
District, which is County for US addresses (CITY2)
I haven't seen a report with CITY2 and have tried S_ALR_87012180 or opening KNA1, KNVI, etc.
Any ideas?
Thanks,
Michelle

No there is not such report or transaction.
You may look at tables KNA1 + ADRC.
In table KNA1 there are fields ORT01, ORT02, COUNC and CITYC that could help
Otherwise you must link KNA1 and ADRC with field KNA1-ADRNR = ADRC-ADDRNUMBER
Sorry
BR
Alain

Project Server User Security + Custom SSRS Reports Project List Parameter

Hello, below is the issue / challenge scenario:
I'mnt. We have to remove the smaller chunk of queries that are hitting the published database to get the user security permissions. I'm using custom SSRS reports that are pulling data from Reporting database and other custom financial SQL DB's. I need to
figure out a solution to get the list of accessible projects for a particluar user using PSI. I did find this technet article that addresses my issue in a way
http : // technet . microsoft . com/en-us/office/ee862408(v=office.14).aspx#pj2007_ta_SecurityInReports_DevelopingThePsiProxiesClassLibrary
the above solution means that I need to change many of my existing report queries (going to published DB)
Is there a simpler way to maintain a table that I can populate with the Project GUID's, name , user id, name using PSI? I can then refer the existing SQL's procs, TVF's to point to this table instaed of going to the published DB (unsupported method)
Any help/ direction is greatly appreciated
thanks,
SG

Hello,
The ReadProjectStatus PSI method defaults to Project for the Project Type, the value is 0. If you want other project types is gets slightly more complicated as you have to have multiple data sets for the ReadProjectStatus call, one for each project type
- each time specifying the default projType. For example for Projects (0) the query is:
<Query>
<Method Namespace="http://schemas.microsoft.com/office/project/server/webservices/Project/" Name="ReadProjectStatus">
<Parameters>
<Parameter Name="projType"><DefaultValue>0</DefaultValue></Parameter>
</Parameters>
</Method>
<SoapAction>http://schemas.microsoft.com/office/project/server/webservices/Project/ReadProjectStatus</SoapAction>
<ElementPath IgnoreNamespaces="true">ReadProjectStatusResponse/ReadProjectStatusResult/diffgram/ProjectDataSet/Project{PROJ_NAME,PROJ_UID,PROJ_TYPE}</ElementPath>
</Query>
For sub projects (5) it is:
<Query>
<Method Namespace="http://schemas.microsoft.com/office/project/server/webservices/Project/" Name="ReadProjectStatus">
<Parameters>
<Parameter Name="projType"><DefaultValue>5</DefaultValue></Parameter>
</Parameters>
</Method>
<SoapAction>http://schemas.microsoft.com/office/project/server/webservices/Project/ReadProjectStatus</SoapAction>
<ElementPath IgnoreNamespaces="true">ReadProjectStatusResponse/ReadProjectStatusResult/diffgram/ProjectDataSet/Project{PROJ_NAME,PROJ_UID,PROJ_TYPE}</ElementPath>
</Query>
You have to repeat this for all project types you want to include, create a hidden parameter for each project type then create a parameter to join them up and use the combined parameter to filter the data sets that get the data from the Reporting
database.
For other parameters in the ReadProjectStatus method see:
http://msdn.microsoft.com/en-us/library/gg210536(v=office.15).aspx
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

Error while running custom BI report in R12.1.1

Hi All,
We are encountering below error while running custom BI report in R12.1.1...
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
Enter Password:
MSG-00001: started report
REP-1401: '': Fatal PL/SQL error occurred.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1401: '': Fatal PL/SQL error occurred.
Report Builder: Release 10.1.2.3.0 - Production on Fri Jun 24 16:47:30 2011
Please let us know how to fix this error.
Thanks
Praveen

Hi Praveen,
Seems the issue is with the rdf. Check whether all the parameters are passed correctly.
REP-1401: '': Fatal PL/SQL error occurred.

Customer payment report

I have an requirement, user ask me to generate a customer report to them on monthly basis, i would like to know which table can be use? The report need to shown the customer payment date( i think use entry date would be better), and for which invoice and sales order item... thank you very much.
Moderator Message: First work on it yourself and get back if you have any specific queries.
Edited by: kishan P on Nov 30, 2010 10:01 AM

Hi
i think we can get report from ABAP Query. we have to write Query using tables and select fields, then we can get customer payment report.

Problem in making logic for customer balance report

Hi,
I am working on a customer balance report in which i am picking the data from BSAD and BSID tables. I am facing a problem that i am able to calculate the opening balance in it but not able to calculate closing balance. I am comparing the data with tcode FBL5N for opening and closing balances for a given date range. Kindly help me out where i am getting wrong:-
Here the link to the code :-
http://docs.google.com/View?id=dfxswwff_11fdktr7ct
Edited by: nav009 on Feb 6, 2010 9:30 AM

Hi Nikhil,
Thanks for you response but i had developed the report and i am able to pick the correct data but i am facing the problem in displaying the NETAMT which is displaying the data using this formula :-
1.) NETAMT = NETAMT + W_TAB1-DR + W_TAB1-CR.
so that the last value matches with the closing balance.
When i am using this formula i am not able to display the correct data of deducting or addition of the opening balance in it but the value matches with closing balance .
2.) NETAMT = NETAMT + W_OPBAL-OPBAL + W_TAB1-DR + W_TAB1-CR.
When i am using this formula it is showing the first value correctly but not the last one which will be displayed in the closing balance.
I want to have desired output to display the first value to be displayed as it is showing in the (2) and last value to be displayed as it is showing in (1) last value.
How can i achieve this functionality? i really want to know...
Edited by: nav009 on Feb 10, 2010 6:29 AM

Upgrade from 11i to R12 - Custom Forms,Reports and Workflows

Dear Community Friends,
We are planning for upgrade from oracle apps 11.5.10.2 to R12.
We have custom Forms,Form Libraries,Reports and Workflows.
Kindly provide me for approach on how to migrate Custom form libraries,reports and Workflows.
I beleive, this thread will exists as one shot point for custom forms,reports,workflow upgradation from 11i to r12 with detailed steps.
I know that many links exists here in the forum for all the above objects mentioned,but still from all those i am able to get a clear picture for oracle forms but not for custom form libraries ,reports and workflows.
Also,this post will provide a low level,practical picture of the steps for those who are in line with this.
Links i have read for all these in our forum are:
For Custom Forms,
Re: Planning to upgrade from 11i to R12
Re: Custom forms: After upgrading 11i to R12
ofcourse,'n' number of links exists providing metalink notes also.
Hussain,Helios and some others also has given many updates regd this.
For custom workflow upgradation,
Upgrade Workflow 11i to R12
Workflow Upgrade
Workflow Upgrade
For reports,links mentioned the below metalink notes:
Do Not Compile EBS R12 Reports Using rwconverter.sh or Reports Builder from IDS 10gR2 [ID 786794.1]
Using the OracleAS 10.1.2 Forms and Reports Builders with Oracle Applications Release 12 [ID 444248.1]
Per my understanding, after searching in many threads,i am here by summarising the practical low level steps for custom forms migration
Please correct me,if i am wrong.
1) Download the Forms(.fmb's) and all PLL's(all the PLL from resource folder in AU_TOP) into a Local Machine Folder
2) Open the forms using Forms Developer 10G and connect to DB
3) Compile by clicking compilein Forms Developer and then save it.
4) Upload the Saved Forms(.fmb's) into the new R12 server(system) in the respective custom paths(paths similar to 11i Server)
5) Compile all the forms using the command like below(example command is shown below or f60 gen commands or frmcmp.sh utility) in the respective custom form paths,
this will generate the .fmx's.
frmcmp_batch module=FORMNAME.fmb userid=apps/apps output_file=FORMNAME.fmx compile_all=yes
Link for compiling forms: https://support.oracle.com/epmos/faces/ui/km/SearchDocDisplay.jspx?_afrLoop=359210362972527&type=DOCUMENT&id=1085928.1&displayIndex=3&_afrWindowMode=0&_adf.ctrl-state=c348xvwbg_98
6) Open the form and check in R12 instance
As per my understanding for custom form libraries,we can just copy paste the PLL's from 11i server to R12 server (Please correct me,if i am wrong)
Can anyone please help me out in custom reports and custom workflows.Sorry that,i could not get a practical and clear picture for reports and also for workflow even after referring many threads and metalink notes mentioned.
As for reports,some says that Developer Suite 10g can be used and .rdf can be used in R12.
Some says that reports should be converted to XML published as reports does not exists in R12.
So,i am not clear on this.
Thanks,
Ganesh
[email protected]

Per my understanding, after searching in many threads,i am here by summarising the practical low level steps for custom forms migration
Please correct me,if i am wrong.
1) Download the Forms(.fmb's) and all PLL's(all the PLL from resource folder in AU_TOP) into a Local Machine Folder
2) Open the forms using Forms Developer 10G and connect to DB
3) Compile by clicking compilein Forms Developer and then save it.
4) Upload the Saved Forms(.fmb's) into the new R12 server(system) in the respective custom paths(paths similar to 11i Server)
5) Compile all the forms using the command like below(example command is shown below or f60 gen commands or frmcmp.sh utility) in the respective custom form paths,
this will generate the .fmx's.
frmcmp_batch module=FORMNAME.fmb userid=apps/apps output_file=FORMNAME.fmx compile_all=yes
Link for compiling forms: https://support.oracle.com/epmos/faces/ui/km/SearchDocDisplay.jspx?_afrLoop=359210362972527&type=DOCUMENT&id=1085928.1&displayIndex=3&_afrWindowMode=0&_adf.ctrl-state=c348xvwbg_98
6) Open the form and check in R12 instance
As per my understanding for custom form libraries,we can just copy paste the PLL's from 11i server to R12 server (Please correct me,if i am wrong)You are right, and the steps mentioned above should be sufficient.
Can anyone please help me out in custom reports and custom workflows.Sorry that,i could not get a practical and clear picture for reports and also for workflow even after referring many threads and metalink notes mentioned.
As for reports,some says that Developer Suite 10g can be used and .rdf can be used in R12.
Some says that reports should be converted to XML published as reports does not exists in R12.
So,i am not clear on this.You can still use RDF files in R12, and just follow the approach you mentioned above, and you do not have to migrate them to XML publisher (though it is recommended, but this can be done after the upgrade as an enhancement task).
For custom workflow, you need also to do the same thing, open them using workflow builder and make sure they work in R12 (correct the code if required and save them again in R12 once they work properly).
Thanks,
Hussein

How to create new Custom XML Report without using Form Builder

Hi,
What are the steps to create new Custom XML Report without using Report Builder ?
Thanks and Regards,
Abhi

Hi,
Steps we now follow
1)Create Data Model in Reports Builder
2)Create xml
3)Insert xml in Publisher to build Fomat
4)FTp rdf
5)Create Data Definition and Template
6)Create executable and Concurrent Program
Is there any way we can build reports without use of Report Builder ? By writing PL SQL Package for Before Report and After Report etc ...
Thanks and Regards,
Abhijit Rode

Can I use Report Manager to distribute customized oracle reports?

Hi,
Can I use Report Manager to distribute customized oracle reports, other than FSG reports?
If no, is there any function that can be used for distributing reports submitted from concurrent manager in r12.1.2?
Thanks for any advice!
HY

Pl post details of OS and EBS versions.
>
Can I use Report Manager to distribute customized oracle reports, other than FSG reports?
>
I am not sure - pl ask your friendly Oracle salesperson if this functionality is included in your license.
>
If no, is there any function that can be used for distributing reports submitted from concurrent manager in r12.1.2?
>
Another option could be to use XML/BI Publisher - again, you will need to check if your license includes distributing custom reports.
HTH
Srini

SGD Exchange Rate Difference JE appears in Customer Aging Report

Dear Experts,
SAP Version: 8.81
Local Currency: SGD
We perform Exchange Rate Difference for a USD BP to calculate the unrealized gain/loss during month-end, JE created successfully.
Next, we go to Customer Aging Report and select this USD BP.
When i choose to view the Aging Report in Local Currency, the USD Invoice will appear in SGD + Exchange Rate Difference JE in SGD, the total balance can appear in SGD with no problem.
When i choose to view the Aging Report in BP Currency, the USD Invoice will appear in USD + Exchange Rate Difference JE in SGD, i can't see the total balance as it is appeared as xxxxx.
Above is the behaviour in 881.
Last time in SAP 2005, when i choose to view the Aging Report in BP Currency, the Exchange Rate Difference JE in SGD will not appear, therefore i can see the total balance in USD.
What is your opinion about the behavior in 881? Will you consider it as design or issue?
Thanks.
Regards,
Lay Chin

Dear all,
This problem is no longer there when upgrade to 881 Patch 08.
Regards,
Lay Chin

Dunning letters generation when customer address is changed

Hi,
For some customers no dunning letters were generated. After investigation inactive bill-to site should be activated as invoices were assigned to this bill-to.
How is possible to make that dunning letters generated when customer address is changed and customer can receive letters to new address for all its invoices?
Any help will be appreciated!
BR, JC

hi
I have created one sales order example X and i created the another sales order Y with respect to X
Is this X sales document is closed????
And I also changed the address of the ship to party in sales document Y.
Did you assgined another SP to sales Document Y
If you have chnaged the address for SP in customer master then it will reflect to both
Also it will not chnage the ADRESS NO in VBPA table, but it will update the address

AR Customer statements report Page numbers Reset based on customer number

Hello,
In the AR Customer statements report, If I ran the report for multiple customers, page number has to be reset for each customer...
Group Started like below,
<?for-each-group:G_STATEMENT;STATEMENT_DATE?><?for-each-group:current-group();SEND_TO_ADDRESS_ID?>

Hi Kittu,
I got the answer using @section command.
Below are the complete syntax in my case.
Form field --Xml Tag
If Data Found --<?choose@section:?><?when:count(G_SETUP)!=0?>
Group G_SETUP --<?for-each@section:G_SETUP?>
Group G_STATEMENT --<?for-each-group@section:G_STATEMENT;STATEMENT_DATE?><?for-each-group@section:current-group();SEND_TO_ADDRESS_ID?>
Its working for me.
Let me know if you required more information.
Regards,
Dasarath

Customized Crystal Report execution problem in Win 7

Hi Experts,
I am getting a screen of Server : Database : Userid : Password while attempt to run a customized crystal report from Win 7 based platform. In the screen database selection option is inactive so it is not possible to select the databse.
The OS of user PC has been formated recently current OS is Win 7 and before that it was XP running fine. Is it a report problem or any other problem please guide??
SK

Hi ,
are you running report from SAP ? if so , Run SAP as administrator(right click on SAP icon and click run as administrator) and run report - it will work fine .
if ypu are running report directly from crystal report , run crystal report as administrator.
or change crystal report connection from SAP business one to OLEDB and update datasource.
Thanks,
Neetu

Customer address report

Similar Messages

Maybe you are looking for