Customer aging logic
Hi,
There is an requirement where i need to generate report on aging..
ie.. amount unpaid by the customer to be identified on different aging
0-15 days 16-30 days 31-45 days 56-90 days
so the output of the report show be like above on different again
this logic need to be implemented using decode function in a single select statement
pls help me in this regard
As pkchan says case is much more confortable and readable than decode
select customer_id,
amount_due,
case when trunc(sysdate) - due_date < 16 then '0 - 15'
when trunc(sysdate) - due_date < 31 then '16 - 30'
when trunc(sysdate) - due_date < 46 then '31 - 45'
when trunc(sysdate) - due_date < 91 then '46 - 90'
else 'over 90'
end aging
from your_table
where due_date <= trunc(sysdate)
and amount_paid is null
select customer_id,
amount_due,
decode(sign(trunc(sysdate) - due_date - 16),-1,'0 - 15',
decode(sign(trunc(sysdate) - due_date - 31),-1,'16 - 30',
decode(sign(trunc(sysdate) - due_date - 46),-1,'31 - 45',
decode(sign(trunc(sysdate) - due_date - 91),-1,'46 - 90','over 90')))) aging
from your_table
where due_date <= trunc(sysdate)
and amount_paid is null*** not tested ***
Regards
Etbin
Similar Messages
-
Problem in Logic for Customer Ageing Report
Hi,
I am developing a Customer Ageing Report in which i am facing a problem i.e. i am taking tables BSID,BSAD in which i ham taking the open items first and then i am using for all entries in it on the open items and i had debugged it and data picking is correct .
But the MAJOR problem comes when the data is stored in the respective coloumns i.e. 0-30 ,31-60-61-90 etc.. Currently i am comparing the code with the Standard Report i.e.S_ALR_87012126 it is not coming accurate...
Is there any way to solve this problem ....
Edited by: nav009 on Jan 8, 2010 11:39 AMHi,
First you need to calculate the Due date of the Transaction with the help of FM 'NET_DUE_DATE_GET'.
Once you get the Due date calculate the value wf_nod as wf_nod = p_budat - wf_due_date where p_budat is the date on which you want to run the ageing report and wf_due_date is due date of the transaction.
once you get this wf_nod write the following logic :
IF wf_nod < 0.
wa_tab-ndue = wa_data-dmbtr.
ELSE.
IF wf_nod <= pnod1.
wa_tab-amt1 = wa_data-dmbtr.
ELSE.
IF wf_nod > pnod1 AND wf_nod <= pnod2.
wa_tab-amt2 = wa_data-dmbtr.
ELSE.
IF wf_nod > pnod2 AND wf_nod <= pnod3.
wa_tab-amt3 = wa_data-dmbtr.
ELSE.
IF wf_nod > pnod3 AND wf_nod <= pnod4.
wa_tab-amt4 = wa_data-dmbtr.
ELSE.
IF wf_nod > pnod4 AND wf_nod <= pnod5.
wa_tab-amt5 = wa_data-dmbtr.
ELSE.
IF wf_nod > pnod5.
wa_tab-amt6 = wa_data-dmbtr.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
Collect wa_tab into it_tab.
where pnod1.......pnod5 are the aging period as 30,60,90,180,365 etc.
by this you will get correct results.
Please get back to me if you need some more help on this.
Regards,
Nikhil -
Regarding Customer ageing report logic in R/3.
Dear
Experts
i have requirement to develop customer ageing report logic for input 30,60,90,180,360
i don' t have any idea hw can i take these values in input& hw can i caluclate the values
i searched in sdn, i did n't get any suitable answer..
Regards
SpandanaHello,
Go to transaction code FDI4
Select Form Type RFFRRD20 Line item analysis
Give your form name and description
Structure (Two axis) - as defaulted
Click on Create
You will have lead column
Delete the rows 2, 3 and 4
Double click on column 1
Enter the customer numbers from 1 to 999999
First column double click (A)
Slelect following values
Due date analysis 1
Days for net due date 0 to 30
Give the short name, medium name and long text for the column.
Repeat this step in next columns like 31 to 60, 61 to 90, 91 to 120 and 121 to 99999 days etc in other columns and select due date analysis 1. (B,C,D,E)
Create one more column by way of formula. To create a new column you need to double click on blue line. Put formula add all five columns you have created above. (F = ABCDE)
You prepare one more column with
Due date analysis 2 (G)
Now you prepare one more column add (F+G) = This will be total open items = over due and not due.
Now go to FDI1 and prepare a report - assign the form created in FDI4 to the report.
Characteristics you need to select are
Account Type (Select Account Type as D for customers)
Currency
Customer
Document Type
Special G/L Ind
Company Code
Change the output types and options according to your requirement.
Refer FDI2 and FDI3 for other standard reports created.
Refer FDI5 and FDI6 for other standard forms created.
Save your report and execute.
Regards,
Ravi -
Vendor aging report ,customer aging report
hi to all
can u pls what is vendor aging report . what is the purpose of it . can u pls some theoritical description
i will definitely reward points pls its urgent pls tell if there r any standard reports exists for theese . pls give some custom reports on theese with coding.
and for customer aging also
pls.................Hi,
Check the Vendor against report code:
REPORT zvender_os NO STANDARD PAGE HEADING
LINE-SIZE 132
LINE-COUNT 65.
Tables
TABLES: bsik, "open items (A/C: Secondary Index for Customers)
lfa1, "customer master
lfb1,
rf140, "temp stru (Work Fields for Corrence(SAPF140*))
bsak, "cleared items (A/c Secnd Index for Cust(Clrms))
skat.
constants and variables
TYPE-POOLS: slis.
DATA: fieldcat TYPE slis_t_fieldcat_alv,
fieldcat1 TYPE slis_t_fieldcat_alv,
fieldcat_ln TYPE slis_fieldcat_alv,
layout_in TYPE slis_layout_alv,
layout_in1 TYPE slis_layout_alv,
sortcat TYPE slis_t_sortinfo_alv,
sortcat1 TYPE slis_t_sortinfo_alv,
sortcat_ln LIKE LINE OF sortcat,
eventcat1 TYPE slis_t_event,
eventcat TYPE slis_t_event,
eventcat_ln LIKE LINE OF eventcat,
col_pos TYPE i.
DATA: targ_month(2) TYPE n, "0001
targ_year(4) TYPE n, "0001
targ_mth_abs TYPE p, "0001
doc_month(2) TYPE n, "0001
doc_year(4) TYPE n, "0001
doc_mth_abs TYPE p, "0001
mth_result TYPE p, "0001
doc_days TYPE p,
targ_days TYPE p,
addl_days TYPE p,
ext_days TYPE p,
v_days(3) TYPE c,
v_kkber LIKE knkk-kkber.
DATA:
BEGIN OF inrec OCCURS 1000, "0001
lifnr LIKE bsik-lifnr,
belnr LIKE bsik-belnr,
gjahr LIKE bsik-gjahr,
bldat LIKE bsik-bldat,
xblnr LIKE bsik-xblnr,
blart LIKE bsik-blart,
sgtxt LIKE bsik-sgtxt,
shkzg LIKE bsik-shkzg,
dmbtr LIKE bsik-dmbtr,
zfbdt LIKE bsik-zfbdt,
zbd1t LIKE bsik-zbd1t,
zbd2t LIKE bsik-zbd2t,
zbd3t LIKE bsik-zbd3t,
zuonr LIKE bsik-zuonr,
END OF inrec.
DATA:
BEGIN OF inrect OCCURS 1000, "0001
lifnr LIKE bsik-lifnr,
belnr LIKE bsik-belnr,
gjahr LIKE bsik-gjahr,
bldat LIKE bsik-bldat,
xblnr LIKE bsik-xblnr,
blart LIKE bsik-blart,
sgtxt LIKE bsik-sgtxt,
shkzg LIKE bsik-shkzg,
dmbtr LIKE bsik-dmbtr,
zfbdt LIKE bsik-zfbdt,
zbd1t LIKE bsik-zbd1t,
zbd2t LIKE bsik-zbd2t,
zbd3t LIKE bsik-zbd3t,
zuonr LIKE bsik-zuonr,
END OF inrect,
BEGIN OF t_item OCCURS 1000, " 0001
lifnr LIKE bsik-lifnr,
belnr LIKE bsik-belnr,
gjahr LIKE bsik-gjahr,
bldat LIKE bsik-bldat,
xblnr LIKE bsik-xblnr,
blart LIKE bsik-blart,
sgtxt LIKE bsik-sgtxt,
zfbdt LIKE bsik-zfbdt,
dmbtr LIKE bsik-dmbtr,
days(3) TYPE c,
zuonr LIKE bsik-zuonr,
END OF t_item,
t_line LIKE t_item OCCURS 1000 WITH HEADER LINE, " 0001
BEGIN OF itab OCCURS 1000,
lifnr LIKE lfa1-lifnr,
total LIKE bsik-dmbtr,
zfuture LIKE bsik-dmbtr,
zcurrent LIKE bsik-dmbtr,
crbal LIKE bsik-dmbtr,
30days LIKE bsik-dmbtr,
60days LIKE bsik-dmbtr,
90days LIKE bsik-dmbtr,
99days LIKE bsik-dmbtr,
120days LIKE bsik-dmbtr,
180days LIKE bsik-dmbtr,
365days LIKE bsik-dmbtr,
bzirk LIKE knvv-bzirk,
vkbur LIKE knvv-vkbur,
vwerk LIKE knvv-vwerk,
vkgrp LIKE knvv-vkgrp,
klimk LIKE knkk-klimk,
cashd LIKE knkk-cashd,
grupp LIKE knkk-grupp,
erdat LIKE lfa1-erdat,
name1 LIKE lfa1-name1,
name2 LIKE lfa1-name2,
stras LIKE lfa1-stras,
ort01 LIKE lfa1-ort01,
telf1 LIKE lfa1-telf1,
psort(10),
sperr LIKE lfa1-sperr,
totsal LIKE bsik-dmbtr,
txt50 LIKE skat-txt50,
gsber LIKE bsik-gsber,
END OF itab.
DATA: sel_tab TYPE TABLE OF rsparams WITH HEADER LINE,
p_debit(1) TYPE c,
p_credit(1) TYPE c.
DATA: t_variant LIKE disvariant OCCURS 0 WITH HEADER LINE.
parameters and select-options
SELECTION-SCREEN BEGIN OF BLOCK blck0 WITH FRAME TITLE text-002.
PARAMETERS: stida LIKE sy-datum DEFAULT sy-datum OBLIGATORY,
p_bukrs LIKE t001-bukrs DEFAULT 'PIIL' MEMORY ID buk
OBLIGATORY.
P_BUKRS LIKE T001-BUKRS DEFAULT 'CC01' OBLIGATORY. "0003
SELECT-OPTIONS: s_lifnr FOR bsik-lifnr ,
s_vkbur FOR knvv-vkbur,
s_vkgrp FOR knvv-vkgrp,
s_bzirk FOR knvv-bzirk,
s_konda FOR knvv-konda,
s_kdgrp FOR knvv-kdgrp NO-DISPLAY ,
s_kvgr2 FOR knvv-kvgr2 NO-DISPLAY ,
s_kkber FOR knkk-kkber NO-DISPLAY ,
s_grupp FOR knkk-grupp NO-DISPLAY ,
s_ctlpc FOR knkk-ctlpc,
s_akont FOR lfb1-akont,
s_gsber FOR bsik-gsber.
PARAMETERS: p_future AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK blck0.
SELECTION-SCREEN BEGIN OF BLOCK blck1 WITH FRAME TITLE text-002.
PARAMETERS: p_abs RADIOBUTTON GROUP zrad,
p_due RADIOBUTTON GROUP zrad DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK blck1.
*SELECTION-SCREEN BEGIN OF BLOCK blck2 WITH FRAME TITLE text-003.
*PARAMETERS: c_run RADIOBUTTON GROUP zrac DEFAULT 'X',
c_blk RADIOBUTTON GROUP zrac,
c_all RADIOBUTTON GROUP zrac.
*SELECTION-SCREEN END OF BLOCK blck2.
*SELECTION-SCREEN BEGIN OF BLOCK blck3 WITH FRAME TITLE text-004.
*PARAMETERS: p_debit AS CHECKBOX DEFAULT 'X' ,
p_credit AS CHECKBOX DEFAULT 'X' NO-DISPLAY,
*selection-screen end of block blck3.
start-of-selection.
START-OF-SELECTION.
PERFORM BUILD_EVENTCAT.
p_debit = 'X'.
p_credit = 'X'.
PERFORM get_customer_invoices.
filter records based on selection criteria
PERFORM filter_records.
END-OF-SELECTION.
PERFORM add_sort_field.
PERFORM modify_field.
PERFORM write_report.
*& Form FILTER_RECORDS
To collect all the required data from DB and store them in
internal table.
--> p1 text
<-- p2 text
FORM filter_records.
delete records based on selection criteria
LOOP AT itab.
SELECT vkbur vkgrp vwerk erdat konda kdgrp bzirk kvgr2
INTO (itab-vkbur, itab-vkgrp, itab-vwerk, knvv-erdat,
knvv-konda, knvv-kdgrp,itab-bzirk,knvv-kvgr2)
FROM knvv WHERE lifnr = itab-lifnr
ORDER BY erdat DESCENDING.
AKS :- Not Required for PI
CASE itab-vkbur.
WHEN 'SA1'.
itab-vkbur = 'SF25'.
WHEN 'QLD1'.
itab-vkbur = 'SF23'.
WHEN 'WA1'.
itab-vkbur = 'SF26'.
ENDCASE.
AKS.
EXIT.
ENDSELECT.
IF itab-vkbur IN s_vkbur AND
itab-vkgrp IN s_vkgrp AND
knvv-konda IN s_konda AND
knvv-kdgrp IN s_kdgrp AND
itab-bzirk IN s_bzirk AND
knvv-kvgr2 IN s_kvgr2.
ELSE.
DELETE itab.
CONTINUE.
ENDIF.
SELECT SINGLE klimk grupp cashd
INTO (itab-klimk, itab-grupp, itab-cashd)
FROM knkk WHERE lifnr = itab-lifnr
AND kkber IN s_kkber
AND ctlpc IN s_ctlpc
AND grupp IN s_grupp.
IF SY-SUBRC NE 0.
DELETE ITAB.
CONTINUE.
ENDIF.
SELECT SINGLE skat~txt50
INTO (itab-txt50)
FROM lfb1 INNER JOIN skat
ON lfb1akont EQ skatsaknr
WHERE lfb1~lifnr = itab-lifnr
AND lfb1~akont IN s_akont
AND skat~spras EQ 'EN'.
IF sy-subrc NE 0.
DELETE itab.
CONTINUE.
ENDIF.
SELECT SINGLE name1 name2 telf1 erdat stras ort01 sperr
INTO (itab-name1, itab-name2, itab-telf1,
itab-erdat, itab-stras, itab-ort01, itab-sperr )
FROM lfa1
WHERE lifnr = itab-lifnr
IF sy-subrc NE 0 .
DELETE itab.
CONTINUE.
ENDIF.
AKS For Filteration of Customer base on Block Area.
IF c_all NE 'X'.
IF c_run EQ 'X' AND itab-sperr EQ 'X'.
DELETE itab.
CONTINUE.
ELSE.
IF c_blk EQ 'X' AND itab-sperr NE 'X'.
DELETE itab.
CONTINUE.
ENDIF.
ENDIF.
ENDIF.
MODIFY itab.
ENDLOOP.
ENDFORM. " FILTER_RECORDS
*& Form GET_CUSTOMER_INVOICES
text
--> p1 text
<-- p2 text
FORM get_customer_invoices.
DATA:ztotcre LIKE bsik-dmbtr.
DATA:ztotsal LIKE bsik-dmbtr.
DATA: fsdate LIKE sy-datum.
DATA: l_perio(4) TYPE c.
MOVE stida TO rf140-stida.
MOVE rf140-stida+4(2) TO targ_month.
MOVE rf140-stida+0(4) TO targ_year.
MOVE rf140-stida+6(2) TO targ_days.
targ_mth_abs = ( targ_year * 12 ) + targ_month.
CALL FUNCTION 'ZGET_PERIOD_FROM_DATE'
EXPORTING
i_date = stida
IMPORTING
e_perio = l_perio.
CONCATENATE l_perio '0401' INTO fsdate.
select open items.
IF p_due EQ 'X'.
SELECT lifnr belnr gjahr bldat xblnr blart sgtxt " 0001
shkzg dmbtr zfbdt zbd1t zbd2t zbd3t
zuonr
FROM bsik INTO TABLE inrect
WHERE bukrs = p_bukrs
AND budat LE stida
AND lifnr IN s_lifnr
AND gsber IN s_gsber
AND umskz NE 'T'
AND umskz NE 'F'
AND umskz NE 'R'
AND umskz NE 'P'
AND umskz NE 'J'
AND umskz NE 'L'.
LOOP AT INREC.
IF INREC-SHKZG = 'H'.
INREC-DMBTR = INREC-DMBTR * -1.
ENDIF.
MOVE-CORRESPONDING INREC TO T_ITEM. " 0001
PERFORM COLLECT_INVOICE USING INREC-lifnr INREC-DMBTR
INREC-ZFBDT INREC-ZBD1T
INREC-ZBD2T INREC-ZBD3T.
APPEND T_ITEM.
CLEAR T_ITEM.
ENDLOOP.
LOOP AT inrect.
inrec-lifnr = inrect-lifnr.
inrec-belnr = inrect-belnr.
inrec-gjahr = inrect-gjahr.
inrec-bldat = inrect-bldat.
inrec-xblnr = inrect-xblnr.
inrec-blart = inrect-blart.
inrec-sgtxt = inrect-sgtxt.
inrec-shkzg = inrect-shkzg.
inrec-dmbtr = inrect-dmbtr.
CALL FUNCTION 'NJ_CAL_DATE_IN_INTERVAL'
EXPORTING
date = inrect-zfbdt
days = inrect-zbd1t
months = 00
signum = '+'
years = 00
IMPORTING
calc_date = inrec-zfbdt.
inrec-zbd1t = inrect-zbd1t.
inrec-zbd2t = inrect-zbd2t.
inrec-zbd3t = inrect-zbd3t.
inrec-zuonr = inrect-zuonr.
APPEND inrec.
CLEAR inrec.
ENDLOOP.
ELSE.
SELECT lifnr belnr gjahr bldat xblnr blart sgtxt " 0001
shkzg dmbtr zfbdt zbd1t zbd2t zbd3t
zuonr
FROM bsik INTO TABLE inrec
WHERE bukrs = p_bukrs
AND budat LE stida
AND lifnr IN s_lifnr
AND gsber IN s_gsber
AND umskz NE 'T'
AND umskz NE 'F'
AND umskz NE 'R'
AND umskz NE 'P'
AND umskz NE 'J'
AND umskz NE 'L'.
ENDIF.
SORT inrec BY lifnr shkzg zfbdt .
LOOP AT inrec.
AT NEW lifnr.
For Customers Credit Balance Transaction to be display in Report
End of Credit Balance
ztotcre = 0.
ztotsal = 0.
ENDAT.
IF inrec-shkzg = 'H'.
inrec-dmbtr = inrec-dmbtr * -1.
ztotcre = ztotcre + inrec-dmbtr.
ELSE.
IF inrec-blart = 'RV'.
IF inrec-bldat GE fsdate.
ztotsal = ztotsal + inrec-dmbtr.
ENDIF.
ENDIF.
ztotcre = ztotcre + inrec-dmbtr.
endif.
IF p_debit EQ 'X'.
IF ztotcre > 0.
MOVE-CORRESPONDING inrec TO t_item. " 0001
PERFORM collect_invoice USING inrec-lifnr ztotcre
inrec-zfbdt inrec-zbd1t
inrec-zbd2t inrec-zbd3t
ztotsal.
APPEND t_item.
CLEAR t_item.
ztotcre = 0.
ztotsal = 0.
ENDIF.
ENDIF.
ENDIF.
IF p_credit EQ 'X'.
AT END OF lifnr.
IF ztotcre < 0.
MOVE-CORRESPONDING inrec TO t_item. " 0001
PERFORM collect_invoice USING inrec-lifnr ztotcre
inrec-zfbdt inrec-zbd1t
inrec-zbd2t inrec-zbd3t
ztotsal.
APPEND t_item.
CLEAR t_item.
ztotcre = 0.
ztotsal = 0.
APPEND t_item.
CLEAR t_item.
ENDIF.
ENDAT.
ENDIF.
ENDLOOP.
select cleared items
IF p_due EQ 'X'.
REFRESH inrect. CLEAR inrect.
SELECT lifnr belnr gjahr bldat xblnr blart sgtxt
shkzg dmbtr zfbdt zbd1t zbd2t zbd3t
zuonr
FROM bsak INTO TABLE inrect
WHERE bukrs = p_bukrs
AND budat LE stida
AND augdt > stida
AND lifnr IN s_lifnr
AND gsber IN s_gsber
REFRESH inrec. CLEAR inrec.
LOOP AT inrect.
inrec-lifnr = inrect-lifnr.
inrec-belnr = inrect-belnr.
inrec-gjahr = inrect-gjahr.
inrec-bldat = inrect-bldat.
inrec-xblnr = inrect-xblnr.
inrec-blart = inrect-blart.
inrec-sgtxt = inrect-sgtxt.
inrec-shkzg = inrect-shkzg.
inrec-dmbtr = inrect-dmbtr.
CALL FUNCTION 'NJ_CAL_DATE_IN_INTERVAL'
EXPORTING
date = inrect-zfbdt
days = inrect-zbd1t
months = 00
signum = '+'
years = 00
IMPORTING
calc_date = inrec-zfbdt.
inrec-zbd1t = inrect-zbd1t.
inrec-zbd2t = inrect-zbd2t.
inrec-zbd3t = inrect-zbd3t.
inrec-zuonr = inrect-zuonr.
APPEND inrec.
CLEAR inrec.
ENDLOOP.
ELSE.
REFRESH inrec. CLEAR inrec.
SELECT lifnr belnr gjahr bldat xblnr blart sgtxt
shkzg dmbtr zfbdt zbd1t zbd2t zbd3t
zuonr
FROM bsak INTO TABLE inrec
WHERE bukrs = p_bukrs
AND budat LE stida
AND augdt > stida
AND lifnr IN s_lifnr
AND gsber IN s_gsber
ENDIF.
SORT inrec BY lifnr shkzg zfbdt .
LOOP AT inrec.
AT NEW lifnr.
ztotcre = 0.
ztotsal = 0.
ENDAT.
IF inrec-shkzg = 'H'.
inrec-dmbtr = inrec-dmbtr * -1.
ztotcre = ztotcre + inrec-dmbtr.
ELSE.
IF inrec-blart = 'RV'.
IF inrec-bldat GE fsdate.
ztotsal = ztotsal + inrec-dmbtr.
ENDIF.
ENDIF.
ztotcre = ztotcre + inrec-dmbtr.
endif.
IF p_debit EQ 'X'.
IF ztotcre > 0.
MOVE-CORRESPONDING inrec TO t_item. " 0001
PERFORM collect_invoice USING inrec-lifnr ztotcre
inrec-zfbdt inrec-zbd1t
inrec-zbd2t inrec-zbd3t
ztotsal.
APPEND t_item.
CLEAR t_item.
ztotcre = 0.
ztotsal = 0.
ENDIF.
ENDIF.
ENDIF.
IF p_credit EQ 'X'.
AT END OF lifnr.
IF ztotcre < 0.
MOVE-CORRESPONDING inrec TO t_item. " 0001
PERFORM collect_invoice USING inrec-lifnr ztotcre
inrec-zfbdt inrec-zbd1t
inrec-zbd2t inrec-zbd3t
ztotsal.
APPEND t_item.
CLEAR t_item.
ztotcre = 0.
ztotsal = 0.
APPEND t_item.
CLEAR t_item.
ENDIF.
ENDAT. " 0001
ENDIF.
ENDLOOP.
ENDFORM. " GET_CUSTOMER_INVOICES
*& Form COLLECT_INVOICE
text
-->P_bsik_lifnr text
-->P_bsik_DMBTR text
-->P_bsik_ZFBDT text
-->P_bsik_ZFBDT1 text
-->P_bsik_ZFBDT2 text
-->P_bsik_ZFBDT3 text
FORM collect_invoice USING pp_lifnr
pp_dmbtr
pp_zfbdt
pp_zbd1t
pp_zbd2t
pp_zbd3t
pp_ztotsal.
doc_month = pp_zfbdt+4(2).
doc_year = pp_zfbdt+0(4).
doc_mth_abs = ( doc_year * 12 ) + doc_month.
mth_result = ( targ_mth_abs - doc_mth_abs ).
logic given by Mr. Ashok Singhvi
doc_days = pp_zfbdt+6(2).
addl_days = ( doc_days - targ_days ).
IF addl_days <= 0.
ADD 1 TO mth_result.
ENDIF.
IF NOT pp_zbd3t IS INITIAL.
MOVE pp_zbd3t TO ext_days.
ELSEIF NOT pp_zbd2t IS INITIAL.
MOVE pp_zbd2t TO ext_days.
ELSEIF NOT pp_zbd1t IS INITIAL.
MOVE pp_zbd1t TO ext_days.
ELSE.
CLEAR ext_days.
ENDIF.
CHECK with Andrew whether this is working or not
if extended payment terms exist, subtract no of mths from mth_result
IF NOT ext_days IS INITIAL.
CASE ext_days.
WHEN 30.
SUBTRACT 1 FROM mth_result.
WHEN 60.
SUBTRACT 2 FROM mth_result.
WHEN 90.
SUBTRACT 3 FROM mth_result.
WHEN 120.
SUBTRACT 4 FROM mth_result.
ENDCASE.
ENDIF.
change to key date
IF pp_dmbtr > 0.
IF p_future = 'X'. " 0001
IF mth_result <= 0.
itab-zcurrent = pp_dmbtr.
t_item-days = 'CUR'.
ELSEIF mth_result = 1.
itab-30days = pp_dmbtr.
t_item-days = '30D'.
ELSEIF mth_result = 2.
itab-60days = pp_dmbtr.
t_item-days = '60D'.
ELSEIF mth_result = 3.
itab-90days = pp_dmbtr.
t_item-days = '90D'.
ELSEIF mth_result > 3 AND mth_result <= 4 .
itab-99days = pp_dmbtr.
t_item-days = '99D'.
ELSEIF mth_result > 4 AND mth_result <= 6 .
itab-120days = pp_dmbtr.
t_item-days = '120D'.
ELSEIF mth_result > 6 AND mth_result <= 12 .
itab-180days = pp_dmbtr.
t_item-days = '180D'.
ELSEIF mth_result > 12 .
itab-365days = pp_dmbtr.
t_item-days = '365D'.
ENDIF.
ELSE.
IF mth_result < 0.
itab-zfuture = pp_dmbtr.
t_item-days = 'FUT'.
ELSEIF mth_result = 0.
itab-zcurrent = pp_dmbtr.
t_item-days = 'CUR'.
ELSEIF mth_result = 1.
itab-30days = pp_dmbtr.
t_item-days = '30D'.
ELSEIF mth_result = 2.
itab-60days = pp_dmbtr.
t_item-days = '60D'.
ELSEIF mth_result = 3.
itab-90days = pp_dmbtr.
t_item-days = '90D'.
ELSEIF mth_result > 3 AND mth_result <= 4 .
itab-99days = pp_dmbtr.
t_item-days = '99D'.
ELSEIF mth_result > 4 AND mth_result <= 6 .
itab-120days = pp_dmbtr.
t_item-days = '120D'.
ELSEIF mth_result > 6 AND mth_result <= 12 .
itab-180days = pp_dmbtr.
t_item-days = '180D'.
ELSEIF mth_result > 12 .
itab-365days = pp_dmbtr.
t_item-days = '365D'.
ENDIF.
ENDIF. " 0001
itab-crbal = 0.
itab-total = pp_dmbtr.
ELSE.
IF p_future = 'X'. " 0001
IF mth_result <= 0.
itab-zcurrent = pp_dmbtr.
t_item-days = 'CUR'.
ELSEIF mth_result = 1.
itab-30days = pp_dmbtr.
t_item-days = '30D'.
ELSEIF mth_result = 2.
itab-60days = pp_dmbtr.
t_item-days = '60D'.
ELSEIF mth_result = 3.
itab-90days = pp_dmbtr.
t_item-days = '90D'.
ELSEIF mth_result > 3 AND mth_result <= 4 .
itab-99days = pp_dmbtr.
t_item-days = '99D'.
ELSEIF mth_result > 4 AND mth_result <= 6 .
itab-120days = pp_dmbtr.
t_item-days = '120D'.
ELSEIF mth_result > 6 AND mth_result <= 12 .
itab-180days = pp_dmbtr.
t_item-days = '180D'.
ELSEIF mth_result > 12 .
itab-365days = pp_dmbtr.
t_item-days = '365D'.
ENDIF.
ELSE.
IF mth_result < 0.
itab-zfuture = pp_dmbtr.
t_item-days = 'FUT'.
ELSEIF mth_result = 0.
itab-zcurrent = pp_dmbtr.
t_item-days = 'CUR'.
ELSEIF mth_result = 1.
itab-30days = pp_dmbtr.
t_item-days = '30D'.
ELSEIF mth_result = 2.
itab-60days = pp_dmbtr.
t_item-days = '60D'.
ELSEIF mth_result = 3.
itab-90days = pp_dmbtr.
t_item-days = '90D'.
ELSEIF mth_result > 3 AND mth_result <= 4 .
itab-99days = pp_dmbtr.
t_item-days = '99D'.
ELSEIF mth_result > 4 AND mth_result <= 6 .
itab-120days = pp_dmbtr.
t_item-days = '120D'.
ELSEIF mth_result > 6 AND mth_result <= 12 .
itab-180days = pp_dmbtr.
t_item-days = '180D'.
ELSEIF mth_result > 12 .
itab-365days = pp_dmbtr.
t_item-days = '365D'.
ENDIF.
ENDIF. " 0001
itab-total = pp_dmbtr.
itab-crbal = 0.
ENDIF.
itab-lifnr = pp_lifnr.
itab-totsal = pp_ztotsal.
COLLECT itab.
CLEAR itab.
ENDFORM. " COLLECT_INVOICE
*& Form ADD_SORT_FIELD
text
--> p1 text
<-- p2 text
FORM add_sort_field.
DATA: l_amount(9) TYPE n.
IF p_future = 'X'.
LOOP AT itab.
l_amount = 999999999.
IF itab-365days > 0.
l_amount = l_amount - itab-365days.
CONCATENATE 'A' l_amount INTO itab-psort.
ELSEIF itab-180days > 0.
l_amount = l_amount - itab-180days.
CONCATENATE 'B' l_amount INTO itab-psort.
ELSEIF itab-120days > 0.
l_amount = l_amount - itab-120days.
CONCATENATE 'C' l_amount INTO itab-psort.
ELSEIF itab-99days > 0.
l_amount = l_amount - itab-99days.
CONCATENATE 'D' l_amount INTO itab-psort.
ELSEIF itab-90days > 0.
l_amount = l_amount - itab-90days.
CONCATENATE 'E' l_amount INTO itab-psort.
ELSEIF itab-60days > 0.
l_amount = l_amount - itab-60days.
CONCATENATE 'F' l_amount INTO itab-psort.
ELSEIF itab-30days > 0.
l_amount = l_amount - itab-30days.
CONCATENATE 'G' l_amount INTO itab-psort.
ELSEIF itab-zcurrent > 0.
l_amount = l_amount - itab-zcurrent.
CONCATENATE 'H' l_amount INTO itab-psort.
ELSEif itab-zfuture > 0.
L_AMOUNT = L_AMOUNT - ITAB-zfuture.
CONCATENATE 'F' L_AMOUNT INTO ITAB-PSORT.
ELSE.
l_amount = ABS( itab-total ).
CONCATENATE 'I' l_amount INTO itab-psort.
ENDIF.
MODIFY itab.
ENDLOOP.
ELSE.
LOOP AT itab.
l_amount = 999999999.
IF itab-365days > 0.
l_amount = l_amount - itab-365days.
CONCATENATE 'A' l_amount INTO itab-psort.
ELSEIF itab-180days > 0.
l_amount = l_amount - itab-180days.
CONCATENATE 'B' l_amount INTO itab-psort.
ELSEIF itab-120days > 0.
l_amount = l_amount - itab-120days.
CONCATENATE 'C' l_amount INTO itab-psort.
ELSEIF itab-99days > 0.
l_amount = l_amount - itab-99days.
CONCATENATE 'D' l_amount INTO itab-psort.
ELSEIF itab-90days > 0.
l_amount = l_amount - itab-90days.
CONCATENATE 'E' l_amount INTO itab-psort.
ELSEIF itab-60days > 0.
l_amount = l_amount - itab-60days.
CONCATENATE 'F' l_amount INTO itab-psort.
ELSEIF itab-30days > 0.
l_amount = l_amount - itab-30days.
CONCATENATE 'G' l_amount INTO itab-psort.
ELSEIF itab-zcurrent > 0.
l_amount = l_amount - itab-zcurrent.
CONCATENATE 'H' l_amount INTO itab-psort.
ELSEIF itab-zfuture > 0.
l_amount = l_amount - itab-zfuture.
CONCATENATE 'I' l_amount INTO itab-psort.
ELSE.
l_amount = ABS( itab-total ).
CONCATENATE 'J' l_amount INTO itab-psort.
ENDIF.
MODIFY itab.
ENDLOOP.
ENDIF.
ENDFORM. " ADD_SORT_FIELD
*& Form WRITE_REPORT
text
--> p1 text
<-- p2 text
FORM write_report.
PERFORM build_fieldcat.
PERFORM build_sortcat.
PERFORM build_eventcat.
PERFORM build_layout.
PERFORM start_list_viewer.
ENDFORM. " WRITE_REPORT
*& Form BUILD_FIELDCAT
text
--> p1 text
<-- p2 text
FORM build_fieldcat.
lifnr
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'lfa1'.
fieldcat_ln-fieldname = 'LIFNR'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
APPEND fieldcat_ln TO fieldcat.
Name1
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'lfa1'.
fieldcat_ln-fieldname = 'NAME1'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-seltext_l = 'Name'.
APPEND fieldcat_ln TO fieldcat.
City Details
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'lfa1'.
fieldcat_ln-fieldname = 'ORT01'.
fieldcat_ln-seltext_l = 'City'.
fieldcat_ln-col_pos = col_pos.
APPEND fieldcat_ln TO fieldcat.
Credit Limit
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'KNKK'.
fieldcat_ln-fieldname = 'KLIMK'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-emphasize = 'C41'.
APPEND fieldcat_ln TO fieldcat.
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = 'CRBAL'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-seltext_l = 'Cr. Bal.'.
fieldcat_ln-seltext_m = 'Cr. Bal.'.
fieldcat_ln-seltext_s = 'Cr. Bal.'.
APPEND fieldcat_ln TO fieldcat.
Total Amount
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-fieldname = 'TOTAL'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-seltext_l = 'Out.St.Amt.'.
fieldcat_ln-seltext_m = 'Out.St.Amt.'.
fieldcat_ln-seltext_s = 'Out.St.Amt.'.
fieldcat_ln-ref_tabname = 'zbsik'.
fieldcat_ln-ref_fieldname = 'ZDMBTR'.
APPEND fieldcat_ln TO fieldcat.
IF p_future NE 'X'.
Future
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = 'ZFUTURE'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = 'Future Due'.
fieldcat_ln-seltext_m = 'Future Due'.
fieldcat_ln-seltext_s = 'Future Due'.
APPEND fieldcat_ln TO fieldcat.
ENDIF.
Current
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = 'ZCURRENT'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = 'Normal Due'.
fieldcat_ln-seltext_m = 'Normal Due'.
fieldcat_ln-seltext_s = 'Normal Due'.
APPEND fieldcat_ln TO fieldcat.
30 Days
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = '30DAYS'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = '0-30 Days'.
fieldcat_ln-seltext_m = '0-30 Days'.
fieldcat_ln-seltext_s = '0-30 Days'.
APPEND fieldcat_ln TO fieldcat.
60 Days
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = '60DAYS'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = '31-60 Days'.
fieldcat_ln-seltext_m = '31-60 Days'.
fieldcat_ln-seltext_s = '31-60 Days'.
APPEND fieldcat_ln TO fieldcat.
90 Days
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = '90DAYS'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = '61-90 Days'.
fieldcat_ln-seltext_m = '61-90 Days'.
fieldcat_ln-seltext_s = '61-90 Days'.
APPEND fieldcat_ln TO fieldcat.
99 Days
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = '99DAYS'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = '91-120 Days'.
fieldcat_ln-seltext_m = '91-120 Days'.
fieldcat_ln-seltext_s = '91-120 Days'.
APPEND fieldcat_ln TO fieldcat.
*120Days
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = '120DAYS'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = '121-180 Days'.
fieldcat_ln-seltext_m = '121-180 Days'.
fieldcat_ln-seltext_s = '121-180 Days'.
APPEND fieldcat_ln TO fieldcat.
*180 Days
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = '180DAYS'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = '181-365 Days'.
fieldcat_ln-seltext_m = '181-365 Days'.
fieldcat_ln-seltext_s = '181-365 Days'.
APPEND fieldcat_ln TO fieldcat.
*365 Days
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = '365DAYS'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = '>365 Days'.
fieldcat_ln-seltext_m = '>365 Days'.
fieldcat_ln-seltext_s = '>365 Days'.
APPEND fieldcat_ln TO fieldcat.
Last Payment Date
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'KNKK'.
fieldcat_ln-fieldname = 'CASHD'.
fieldcat_ln-col_pos = col_pos.
APPEND fieldcat_ln TO fieldcat.
Street Name
ADD 1 TO COL_POS.
CLEAR FIELDCAT_LN.
FIELDCAT_LN-REF_TABNAME = 'lfa1'.
FIELDCAT_LN-FIELDNAME = 'STRAS'.
FIELDCAT_LN-COL_POS = COL_POS.
APPEND FIELDCAT_LN TO FIELDCAT.
Telephone
ADD 1 TO COL_POS.
CLEAR FIELDCAT_LN.
FIELDCAT_LN-REF_TABNAME = 'lfa1'.
FIELDCAT_LN-FIELDNAME = 'TELF1'.
FIELDCAT_LN-COL_POS = COL_POS.
APPEND FIELDCAT_LN TO FIELDCAT.
Credit Group
ADD 1 TO COL_POS.
CLEAR FIELDCAT_LN.
FIELDCAT_LN-REF_TABNAME = 'KNKK'.
FIELDCAT_LN-FIELDNAME = 'GRUPP'.
FIELDCAT_LN-COL_POS = COL_POS.
APPEND FIELDCAT_LN TO FIELDCAT.
*Sales District
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'KNVV'.
fieldcat_ln-fieldname = 'BZIRK'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-seltext_l = 'S_Distt'.
fieldcat_ln-seltext_m = 'S_Distt'.
fieldcat_ln-seltext_s = 'S_Distt'.
APPEND fieldcat_ln TO fieldcat.
Sales Office
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'KNVV'.
fieldcat_ln-fieldname = 'VKBUR'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-seltext_l = 'S_Off'.
fieldcat_ln-seltext_m = 'S_Off'.
fieldcat_ln-seltext_s = 'S_Off'.
APPEND fieldcat_ln TO fieldcat.
Cust Creat Date
ADD 1 TO COL_POS.
CLEAR FIELDCAT_LN.
FIELDCAT_LN-REF_TABNAME = 'lfa1'.
FIELDCAT_LN-FIELDNAME = 'ERDAT'.
FIELDCAT_LN-COL_POS = COL_POS.
APPEND FIELDCAT_LN TO FIELDCAT.
Del Plant
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'KNVV'.
fieldcat_ln-fieldname = 'VWERK'.
fieldcat_ln-col_pos = col_pos.
APPEND fieldcat_ln TO fieldcat.
Sales Group
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'KNVV'.
fieldcat_ln-fieldname = 'VKGRP'.
fieldcat_ln-col_pos = col_pos.
APPEND fieldcat_ln TO fieldcat.
Sort Criteria
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'lifnr'.
fieldcat_ln-fieldname = 'PSORT'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-seltext_l = 'Sort Field'.
fieldcat_ln-seltext_m = 'Sort Field'.
fieldcat_ln-seltext_s = 'Sort Field'.
APPEND fieldcat_ln TO fieldcat.
Sales of Customer
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = 'TOTSAL'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = 'Total Sales'.
fieldcat_ln-seltext_m = 'Total Sales'.
fieldcat_ln-seltext_s = 'Total Sales'.
APPEND fieldcat_ln TO fieldcat.
ENDFORM. " BUILD_FIELDCAT
*& Form BUILD_SORTCAT
text
--> p1 text
<-- p2 text
FORM build_sortcat.
SORTCAT_LN-SPOS = '1'.
sortcat_ln-spos = '2'. " 0001
sortcat_ln-fieldname = 'PSORT'.
sortcat_ln-up = 'X'. " 0001
sortcat_ln-subtot = 'X'.
APPEND sortcat_ln TO sortcat.
CLEAR sortcat_ln.
SORTCAT_LN-SPOS = '2'.
SORTCAT_LN-FIELDNAME = 'lifnr'.
sortcat_ln-spos = '1'. " 0001
sortcat_ln-fieldname = 'NAME1'. " 0001
sortcat_ln-up = 'X'.
APPEND sortcat_ln TO sortcat.
ENDFORM. " BUILD_SORTCAT
*& Form BUILD_EVENTCAT
text
--> p1 text
<-- p2 text
FORM build_eventcat.
eventcat_ln-name = 'TOP_OF_PAGE'.
eventcat_ln-form = 'PAGE_HEADER'.
APPEND eventcat_ln TO eventcat.
ENDFORM. " BUILD_EVENTCAT
*& Form BUILD_LAYOUT
text
--> p1 text
<-- p2 text
FORM build_layout.
layout_in-colwidth_optimize = 'X'.
layout_in-no_hotspot = 'X'.
layout_in-zebra = 'X'.
layout_in-get_selinfos = 'X'.
ENDFORM. " BUILD_LAYOUT
*& Form START_LIST_VIEWER
text
--> p1 text
<-- p2 text
FORM start_list_viewer.
DATA: pgm LIKE sy-repid.
pgm = sy-repid.
if t_variant[] is initial.
t_variant-report = pgm.
t_variant-variant = '/ATB'.
t_variant-TEXT = '/ATB'.
t_variant-DEPENDVARS = 'S'.
append t_variant.
clear t_variant.
endif.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = pgm
i_callback_user_command = 'USER_COMMAND'
it_fieldcat = fieldcat
it_sort = sortcat
is_layout = layout_in
i_save = 'A'
IS_VARIANT = t_variant
it_events = eventcat
TABLES
t_outtab = itab
EXCEPTIONS
OTHERS = 2.
ENDFORM. " START_LIST_VIEWER
FORM user_command USING ucomm LIKE sy-ucomm
selfield TYPE slis_selfield.
DATA l_lifnr(10) TYPE n.
READ TABLE itab INDEX selfield-tabindex.
CHECK sy-subrc = 0.
CASE ucomm.
WHEN '&IC1'.
CASE selfield-sel_tab_field.
WHEN 'ITAB-LIFNR'.
SET PARAMETER ID 'LIF' FIELD itab-lifnr.
SET PARAMETER ID 'BUK' FIELD p_bukrs.
IF itab-lifnr CO '0123456789 '.
l_lifnr = itab-lifnr.
itab-lifnr = l_lifnr.
ENDIF.
SELECT SINGLE kkber INTO knkk-kkber
FROM knkk WHERE lifnr = itab-lifnr.
IF sy-subrc EQ 0.
v_kkber = knkk-kkber.
ELSE.
CLEAR v_kkber.
ENDIF.
REFRESH sel_tab[].
MOVE: 'lifnr' TO sel_tab-selname,
'P' TO sel_tab-kind, " PARAMETER
itab-lifnr TO sel_tab-low.
APPEND sel_tab.
CLEAR sel_tab.
MOVE: 'KKBER' TO sel_tab-selname,
'P' TO sel_tab-kind, " PARAMETER
v_kkber TO sel_tab-low.
APPEND sel_tab.
CLEAR sel_tab.
SUBMIT rfdkli41
USING SELECTION-SET 'VAR1'
WITH SELECTION-TABLE sel_tab
AND RETURN.
CALL TRANSACTION 'XK03' AND SKIP FIRST SCREEN.
WHEN 'ITAB-ZCURRENT'. " 0001
v_days = 'CUR'.
PERFORM display_line_item_level.
WHEN 'ITAB-ZFUTURE'.
v_days = 'FUT'.
PERFORM display_line_item_level.
WHEN 'ITAB-30DAYS'.
v_days = '30D'.
PERFORM display_line_item_level.
WHEN 'ITAB-60DAYS'.
v_days = '60D'.
PERFORM display_line_item_level.
WHEN 'ITAB-90DAYS'.
v_days = '90D'.
PERFORM display_line_item_level.
WHEN 'ITAB-99DAYS'.
v_days = '99D'.
PERFORM display_line_item_level.
WHEN 'ITAB-120DAYS'.
v_days = '120D'.
PERFORM display_line_item_level.
WHEN 'ITAB-180DAYS'.
v_days = '180D'.
PERFORM display_line_item_level.
WHEN 'ITAB-365DAYS'.
v_days = '365D'.
PERFORM display_line_item_level.
WHEN 'ITAB-TOTAL'.
v_days = ' '.
PERFORM display_line_item_level. " 0001
ENDCASE.
ENDCASE.
ENDFORM. "USER_COMMAND
PAGE_HEADER
FORM page_header.
WRITE:/115 'Time:', sy-timlo.
WRITE: /115 'Date:', sy-datum.
WRITE: /52 'Customer Outstanding Agewise ', "0002
115 'Page:', sy-pagno.
SKIP.
IF p_abs EQ 'X'.
WRITE: /52 'Vendor Outstanding Agewise (Absolute Aging)',
115 'Page:', sy-pagno.
ELSE.
WRITE: /52 'Vendor Outstanding Agewise (Due Date Aging)',
115 'Page:', sy-pagno.
ENDIF.
SKIP.
ULINE /(132).
WRITE: /02 'Open Items as of:', stida.
IF NOT s_vkgrp[] IS INITIAL.
IF s_vkgrp-high IS INITIAL.
WRITE: 52 'Sales Group :',s_vkgrp-low.
ELSE.
WRITE: 52 'Sales Group :',s_vkgrp-low,'to',s_vkgrp-high.
ENDIF.
ELSE.
WRITE: 52 'Sales Group : All'.
ENDIF.
IF NOT s_grupp[] IS INITIAL.
IF s_grupp-high IS INITIAL.
WRITE: 107 'Credit group :',s_grupp-low.
ELSE.
WRITE: 107 'Credit group :',s_grupp-low,' to',s_grupp-high.
ENDIF.
ELSE.
WRITE: 107 'Credit Group : All'.
ENDIF.
WRITE: /02 'Comapany Code :', p_bukrs.
IF NOT s_konda[] IS INITIAL.
IF s_konda-high IS INITIAL.
WRITE: 52 'Price group :',s_konda-low.
ELSE.
WRITE: 52 'Price group :',s_konda-low,' to',s_konda-high.
ENDIF.
ELSE.
WRITE: 52 'Price Group : All'.
ENDIF.
IF NOT s_ctlpc[] IS INITIAL.
IF s_ctlpc-high IS INITIAL.
WRITE: 107 'Risk category:',s_ctlpc-low.
ELSE.
WRITE: 107 'Risk category:',s_ctlpc-low,' to',s_ctlpc-high.
ENDIF.
ELSE.
WRITE: 107 'Risk category: All'.
ENDIF.
IF NOT s_vkbur[] IS INITIAL.
IF s_vkbur-high IS INITIAL.
WRITE:/02 'Sales Office :',s_vkbur-low.
ELSE.
WRITE:/02 'Sales Office :',s_vkbur-low,' to',s_vkbur-high.
ENDIF.
ELSE.
WRITE:/02 'Sales Office : All'.
ENDIF.
IF NOT s_kdgrp[] IS INITIAL.
IF s_kdgrp-high IS INITIAL.
WRITE: 52 'Customer group :',s_kdgrp-low.
ELSE.
WRITE: 52 'Customer group :',s_kdgrp-low,' to',s_kdgrp-high.
ENDIF.
ELSE.
WRITE: 52 'Customer group : All'.
ENDIF.
IF NOT s_ktokd[] IS INITIAL.
IF s_ktokd-high IS INITIAL.
WRITE: 107 'Account Group:',s_ktokd-low.
ELSE.
WRITE: 107 'Account Group:',s_ktokd-low,' to',s_ktokd-high.
ENDIF.
ELSE.
WRITE: 107 'Account Group: All'.
ENDIF.
IF NOT s_lifnr[] IS INITIAL.
IF s_lifnr-high IS INITIAL.
WRITE: /02 'Vendor No :',s_lifnr-low.
ELSE.
WRITE: /02 'Vendor No :',s_lifnr-low,' to',s_lifnr-high.
ENDIF.
ELSE.
WRITE: /02 'Vendor No : All'.
ENDIF.
IF NOT s_kkber[] IS INITIAL.
IF s_kkber-high IS INITIAL.
WRITE: 52 'Credit Control Area:',s_kkber-low.
ELSE.
WRITE: 52 'Credit Control Area:',s_kkber-low,' to',s_kkber-high. -
Customer Aging Report Query (without invoices offset by incoming payment)
Hi All Experts,
May I know is there any field from JDT1 mention which invoices is already offset by the Incoming payment or AR Credit note? Because I do not want those invoices that already offset by incoming payment appear at the Customer Aging Report. Meaning, the data appear in the Customer Aging Report is only show those invoices that yet to pay by the customer. Kindly give some advise on it. Thanks a lot.
Thanks and regards,
Angie NgHi David,
Thanks for your suggestion. I have try it, but all of my JDT1.IntrnMatch is in 0 value. Meaning in my situation it is none of any reconcilliation making. But from my SBO window, i manage to see that actually this incoming payment is pay for which invoices. Problem is it is difficult for me to do the possiblity logic that might be happen in my Customer Aging Report Query. Please give some advise that how to show only those invoices yet to pay? The current query will show all the data no matter the invoices or credit memo has been offset.
select OCRD.cardcode 'Supplier Code',OCRD.cardname 'Name',sysdeb 'Debit GBP',syscred 'Credit GBP',
case JDT1.transtype
when '13' then 'INV'
when '14' then 'AR CN'
when '24' then 'INCOMING'
else 'Other'
end 'Type',
Ref1,
fccurrency 'BP Currency',
CONVERT(VARCHAR(10), refdate, 103)'Posting Date' ,
CONVERT(VARCHAR(10), duedate, 103) 'Due Date',
CONVERT(VARCHAR(10), taxdate, 103) 'Doc Date' ,
CASE
when (DATEDIFF(dd,refdate,current_timestamp))+1 < 31
then
case
when syscred <> 0 then syscred * - 1
else sysdeb
end
end "0-30 days",
case when ((datediff(dd,refdate,current_timestamp))+1 > 30
and (datediff(dd,refdate,current_timestamp))+1< 61)
then
case
when syscred <> 0 then syscred * - 1
else sysdeb
end
end "31 to 60 days",
case when ((datediff(dd,refdate,current_timestamp))+1 > 60
and (datediff(dd,refdate,current_timestamp))+1< 91)
then
case
when syscred <> 0 then syscred * - 1
else sysdeb
end
end "61 to 90 days",
CASE
when (DATEDIFF(dd,refdate,current_timestamp))+1 > 90
then
case
when syscred= 0 then sysdeb
when sysdeb= 0 then syscred * - 1
end
end "90 + days"
from JDT1,OCRD where JDT1.shortname = OCRD.cardcode and cardtype = 'c' and intrnmatch = '0'
ORDER BY OCRD.CARDCODE, taxdate -
Hi Friends,
As per my knowledge,Customer Aging Report consider only those documents(ar invoice,ar downpayment,incoming payment-payment on a/c,ar credit memo) which are open and showing balance due and standalone JE against Customer.
As I cross checked,I found those standalone JE where Customer and round off account are considered as debit,credit are not considered by 'Customer Aging report'.
So,I just want to know what are all the logic based on which SAP B1 standard report 'Customer Aging ' (without reconciled transaction ) consider the documents????Which SAP B1 Version and Patch is under use at your end ?
There were issues in SAP B1 regarding reconcilliations in versions prior to 2007 series.
Samir Gandhi -
Opening Balance in Customer Aging report
Hi Gurus,
I am making the Customer aging report am facing a problem in the calculation of 'opening balance'.
If the opening balance has to done by using routines how to do it.
I am using the 0FI_AR_4 datasource.
I am getting Debit amount , Credit amount , and Balance. They can be seen in R/3 in the
Tcode: FD10N.
the balance must be calculated with the previous balance.
How to write the routine / what logic must be used . If you have the code please paste it
here or send to: [email protected]
regards
Edited by: man man on Jan 16, 2008 11:04 AMHi,
I am making a report for the Customer Aging.
using the keyfigures 'Debit'(Collections), 'Credit'(Sales), 'Balance'
and the characteristics 'G/L Account', 'Customer'.
I want all the above infoobjects in the report.
regards,
man -
Customer Ageing - by posting period
Hi All / Expert,
I'm facing the customer ageing which I want to display by posting date (parameter in selection criteria) but the total not accruate. The total ageing already reconciled with payment (amount minus payment = remaining balance).
Scenario
1. Display ageing for as at 31.3.2008
Ageing date :31.03.2008
Posting date :1.1.2008 to 31.3.2008
Total ageing :RM 100,000.00
2. Payment on 5.4.2008 is RM 50,000.00
3. 1. Display ageing for as at 31.3.2008
Ageing date :31.03.2008
Posting date :1.1.2008 to 31.3.2008
Total ageing :RM 50,000.00 *
In accounting normal practise it should be display
RM 100,000.00 not RM 50,000.
I dont know what programming or system logic how this customer ageing work.I guess the default by system date not by posting date.
Anyone can tell me how customer ageing calculate the total ageing? Please help me, my client always blame me for this issue. I'm very appreaciated your help.
Thanks in advance.
uddinGood day,
If I may guess, your customer runs SBO 2005? The ageing is wrong in 2005, but corrected in 2007, although there are other Statement issues in 2007.
What should happen:
Customer owns R1000 in 30 days but pays R500. Now he owns R500 in 30 days. 2007 is correct, but in 2005 the system takes the R500 off the current period (period in which payment was made), but not againt the 30 days.
That's the reason why the ageing in 2005 is wrong.
I hope this explains te situation to you.
As soon as ou upgrade to 2007, the issue will be resolved. there are still other issues, but ... we deal with it.
I hope it helps.
Regards -
Open invoice customer ageing query
I have set up a query to find a customer aging report - open ivoices. I just want to have open records... does anyone have a better query for this?
SELECT TOP (100) PERCENT dbo.OCRD.CardName, dbo.OCRD.Balance, (CASE WHEN DATEDIFF(DD, T0.REFDATE, GETDATE()) BETWEEN 0 AND
30 THEN CASE WHEN T1.SYSCred <> 0 THEN T1.SYSCred * - 1 ELSE T1.SYSDeb END ELSE 0 END) AS [0-30], (CASE WHEN DATEDIFF(DD, T0.REFDATE, GETDATE())
BETWEEN 31 AND 60 THEN CASE WHEN T1.SYSCred <> 0 THEN T1.SYSCred * - 1 ELSE T1.SYSDeb END ELSE 0 END) AS [31-60], (CASE WHEN DATEDIFF(DD,
T0.REFDATE, GETDATE()) BETWEEN 61 AND 90 THEN CASE WHEN T1.SYSCred <> 0 THEN T1.SYSCred * - 1 ELSE T1.SYSDeb END ELSE 0 END) AS [61-90],
(CASE WHEN DATEDIFF(DD, T0.REFDATE, GETDATE()) > 91 THEN CASE WHEN T1.SYSCred <> 0 THEN T1.SYSCred * - 1 ELSE T1.SYSDeb END ELSE 0 END) AS [90+],
dbo.OCRD.CardType, T1.TransType, T1.TransCode, T1.LineMemo, T1.BaseRef, dbo.OCRD.CardCode, T1.BalDueDeb
FROM dbo.OJDT AS T0 INNER JOIN
dbo.JDT1 AS T1 ON T1.TransId = T0.TransId INNER JOIN
dbo.OCRD ON dbo.OCRD.CardCode = T1.ShortName
WHERE (dbo.OCRD.Balance >= 1) AND (dbo.OCRD.CardType = 'C') AND (T1.BalDueDeb > 0)
ORDER BY dbo.OCRD.CardName
Regards,
knutKnut,
Try this:
SELECT T2.CardName, T2.Balance,
(CASE WHEN DATEDIFF(DD, T0.REFDATE, GETDATE()) BETWEEN 0 AND
30 THEN CASE WHEN T1.SYSCred != 0 THEN -T1.SYSCred ELSE T1.SYSDeb END ELSE 0 END) AS '0-30',
(CASE WHEN DATEDIFF(DD, T0.REFDATE, GETDATE()) BETWEEN 31 AND
60 THEN CASE WHEN T1.SYSCred != 0 THEN -T1.SYSCred ELSE T1.SYSDeb END ELSE 0 END) AS '31-60',
(CASE WHEN DATEDIFF(DD, T0.REFDATE, GETDATE()) BETWEEN 61 AND
90 THEN CASE WHEN T1.SYSCred != 0 THEN -T1.SYSCred ELSE T1.SYSDeb END ELSE 0 END) AS '61-90',
(CASE WHEN DATEDIFF(DD, T0.REFDATE, GETDATE()) >90
THEN CASE WHEN T1.SYSCred != 0 THEN -T1.SYSCred ELSE T1.SYSDeb END ELSE 0 END) AS '90+',
T1.TransType, T1.TransCode, T1.LineMemo, T1.BaseRef, T2.CardCode
FROM dbo.OJDT T0
INNER JOIN dbo.JDT1 T1 ON T1.TransId = T0.TransId
INNER JOIN dbo.OCRD T2 ON T2.CardCode = T1.ShortName
WHERE (T2.Balance >= 1) AND (T2.CardType = 'C') AND (T1.BalDueDeb != T1.BalDueCred)
Thanks,
Gordon -
SGD Exchange Rate Difference JE appears in Customer Aging Report
Dear Experts,
SAP Version: 8.81
Local Currency: SGD
We perform Exchange Rate Difference for a USD BP to calculate the unrealized gain/loss during month-end, JE created successfully.
Next, we go to Customer Aging Report and select this USD BP.
When i choose to view the Aging Report in Local Currency, the USD Invoice will appear in SGD + Exchange Rate Difference JE in SGD, the total balance can appear in SGD with no problem.
When i choose to view the Aging Report in BP Currency, the USD Invoice will appear in USD + Exchange Rate Difference JE in SGD, i can't see the total balance as it is appeared as xxxxx.
Above is the behaviour in 881.
Last time in SAP 2005, when i choose to view the Aging Report in BP Currency, the Exchange Rate Difference JE in SGD will not appear, therefore i can see the total balance in USD.
What is your opinion about the behavior in 881? Will you consider it as design or issue?
Thanks.
Regards,
Lay ChinDear all,
This problem is no longer there when upgrade to 881 Patch 08.
Regards,
Lay Chin -
Printing Dunning Letter at Customer Aging
My client is using SAP B1 2005 SP1 Patch 42.
Dunning term and dunning level has been properly set up.
We have also design the dunning letter for dunning level 1, eg called it DunningLetter#1
When using Dunning Wizard, SAP prints the letter for dunning letter for dunning level 1 with no problem. However it does not allow preview on the screen.,
Therefore, we try to running Customer Ageing by Due date so that we can see the dunning level, if needed change it. However, when try to print preview dunning letter, it shows nothing on the screen. However, it can be printed directly to the printer.
Is this how it is supposed to work? Ie, we cannot print preview dunning letter.Hi Shwu
This is a known limitation on SAP Business One. You could try printing to a document generator or PDF, but unfortunately the system updates the dunning level with each print regardless of printer.
Kind regards
Peter Juby -
Asking Exchange rate at the time of Customer aging report
Dear All,
I am facing one problem, when I am asking customer aging report the system is asking to enter exchange rate.but at the time of vendor aging is working fine does not asking any exchange rate,this problem happens only one specific user, not for other users.
In other users it is working fine.Do we need to do any configuration for that user for working this customer aging report.
Please give solution as soon as possible
Thanks advance.
Regards
Komanduri.We faced the same problem today.
Finally, we found out the user accidentally selected the currency which we didn't set the exchange rate in the aging report.
After the aging report is generated, we can change the currency in the upper left corner.
If we didn't set the rate of that currency, it will keep asking.
Even if we close the aging report and open again, it will still ask for that currency before it could generate the report
When we set the rate of that currency, it will not ask exchange rate again -
Vendor/Customer Age analysis
hello
the std vendor/creditor age analyses reports don't have 30/60/90 day analysis columns. how do you adaapt the reports to analyse by 30 day periods and which reports do you use? this is ecc 6 classic g/l
thanks.Hi Abaper's ,
S_ALR_87012085 - Vendor Payment History with OI Sorted List
F.22 Customer ageing
I want to see this T-code.. Program name from se93 . so how i can ? I am not getting this Program name ?
pls help as I new in this project .
Warm Regards ,
Navin -
Customer ageing report for fbl5n
hi all,
I want to develop an customer Ageing Report in abap to calculate the net due date which is similar to the Tcode fbl5n but the problem is functional consultant told me about this tcode and there is no such information regarding the specified tables which are to be used. I had searched in SDN also but i did not got the desired information.
regards,
karthik
Edited by: k.vinu.karthik on Jul 23, 2010 7:21 AMUse the development tools available to you - the transaction and a sample account is all you need. Debug, ST05, SE30, etc....
-
Hi all,
Our client requires aging report
for a customer in the following format
Customer Code,Name,0-30 Days,31-60 days,61-90 days,
91-120 days,121-150 days,151-180 days,180 + above days,Row Total (all days).
Condition: By Aging date
Thanks
JeyakanthanHi Jeyakanthan,
SAP Business One displays the relevant open receivables in four columns for the time interval for customer aging report.
The fourth column includes open receivables for the days/months/periods prior to the first three columns. For more information please refer to the explanation for 'Time Intervals' field in Online help.
Based on the testing in 2007 version, it is improved that there is one more column added there, which means if you set 'Time Intervals' as month, you may get five columns in aging report, the first four columns are for 4 months and the last column shows open receivables for the months prior to the first four columns.
Regards,
Van Xue
SAP Business One Forums Team
Maybe you are looking for
-
Error While Running the form 10g
Hi, I have a prob while running the form. Since the day I installed Form 10g at my home pc. Every time after i make any changes in the form, if i try to run the form after compiling and saving. It keeps asking me to enter scott/tiger@anthony to run t
-
http://www.pmcgvideoportfolio.info/test.htm I have been following a tutorial from Adobe relating to "Working with Background Images and CSS - Part 3 Altering the Appearance of Your pages with Drop Shadows." I think I have stayed pretty close to the
-
90 minutes of content... 1 or 2 DVDs
Considering video quality, would I be better off splitting this content onto 2 DVDs of 45 minutes each? I'm just curious because Compressor offers 90 minutes as the shortest pre-set for DVD encoding. With all things being equal will that preset give
-
Ok; my Mac Pro, INTEL I bought 4 .5 years ago. It recently does this- if I leave the computer for 40 minutes or so...my power button starts blinking..and everything freezes up. Not even Command/Option/ESCAPE will 'wake up the computer. I'm r
-
Has anyone used a Redlake camera with LabView?
I can't seem to find any drivers or utilities for the Redlake camera i'm using in my project. Only this: http://www.imagemill-tech.com/Redlake/Fr_Redlake.htm But there's no info on how to get that VI (I've e-mailed them, of course). Any additional in