Customer Agreement question

I am pasting here a section from the Customer Agreement (in quotes) that I want to know if I'm reading right. Is this really saying that Verizon expects us to read the terms of service and privacy policy of every website (use of a third party service) that we visit? Does this really belong in a customer agreement?
"Many services and applications offered through your device may be provided by third parties. Before you use, link to or download a service or application provided by a third party, you should review the terms of such service or application and applicable privacy policy."

Maybe I can explain my question better by providing what I think it actually should say (if they have to clutter up the customer agreement at all, that is): "Many services and applications offered through your device may be provided by third parties. You are advised to read the applicable third party terms of service, license agreements, and/or privacy policies before using, linking to, or downloading each service or application."

Similar Messages

Question on the Verizon Customer Agreement? Verizon Users Please

In the Verizon Customer Agreement, it says that if I accept the agreement, I can cancel a line of Service within 14 ays of accepting this Agreement without having to pay an early termination fee as long as you return, within the applicable period, any equipment I purchased from them or one of their authourozed agents at a discount with my acceptance of this Agreement, but I will still have to pay for my Service through that date.
What does that mean? I've had my iPhone for less than three days, so if I cancel my service within 14 days (meaning I don't have to pay a Early Termination Fee), what do I have to pay? Because it says I have to pay for my Service through that day. Does this mean I have to pay at least one bill before the contract is over?

Of course! You DID purchase the phone from them, didn't you?
as long as you return, within the applicable period, any equipment I purchased from them or one of their authourozed agents at a discount with my acceptance of this Agreement,

Oim 11g Custom Challenge questions

hi,
does oim 11g allows users to setup custom challenge questions.
Sun Idm does have this feature..
any idea on Oracle Idm..
thank you.

How to add custom challenge questions in OIM 11g
Find below link for 11gR2
http://srini-bellamkonda.blogspot.in/2012/11/adding-custom-challenge-questions-in.html

Adding custom challenge questions in OIM 11gR2

Friends,
Can you please let me know the process to add new custom challenge questions in OIM 11gR2?
Thanks

Detailed steps have been given in my blog at the below url.
http://srini-bellamkonda.blogspot.com/2012/11/adding-custom-challenge-questions-in.html
Have a look and let me know if you have any questions.

Custom challenge questions in OIM 11gR2

Hi,
Please let me know how to add custom challenge questions in OIM 11gR2?

Follow the steps given in blog to add custom challenge questions.
http://srini-bellamkonda.blogspot.com/2012/11/adding-custom-challenge-questions-in.html

Problem while setting custom Challenge Questions in 11gR2

Hi all,
I am trying to add some custom Challenge Questions in 11gr2 but it is throwing error . For this first i added questions in Look up and then in customResources_en.properties and then i restarted OIM server.
when a user is logging for the first time he has to set his challenge question there i am getting error like:
JBO-29000: Unexpected exception caught: oracle.iam.ui.platform.exception.OIMRuntimeException, msg=JBO-29000: Unexpected exception caught: java.util.MissingResourceException, msg=Can't find resource for bundle java.util.PropertyResourceBundle, key KEY_WHATTHEHELL
JBO-29000: Unexpected exception caught: java.util.MissingResourceException, msg=Can't find resource for bundle java.util.PropertyResourceBundle, key KEY_WHATTHEHELL
Localized message not available. Error returned is: Can't find resource for bundle java.util.PropertyResourceBundle, key KEY_WHATTHEHELL
Here My custom challenge question is:WHATTHEHELL.
Its an urgent requirement, so reply ASAP.
Thanks In Advance.

If you are going for Localizing Challenge Questions and Responses
http://docs.oracle.com/cd/E27559_01/admin.1112/e27149/app_localizing.htm#OMADM5054

Creative Cloud license agreement question.

This is very interesting for me to use whole CS6 only for 50$/Mo. But it's a bit complicated.
Technically I am a citizen of Russia, but most of the year I live in USA or Thailand. And more importantly, I have an American bank cards.
So, my question is: Can I use my American bank card to purchase Creative Clouds subscription and don't violate agreement?
Thanks for answers.

Hey EnotBert,
The issue is not that you have the US Bank card but it is that the Software needs to be Deployed in US only. ULA (User License Agreement.) says that if you want to Deploy the Software Locally you need to buy it Locally. Only Exception to that, if you are a CLP customer you can buy Perpetual License in US and deploy it anywhere in the world, but this does not apply for Cloud. Hope this helps and explains. Thanks Bharat.

Acrobat SDK License Agreement Question

The following is a section of the latest Acrobat SDK License Agreement from the Adobe website:
"3.2 Development Restrictions. You agree that You will not Use the Software to create, develop or use any program, software or service which . . . (b) can both (i) communicate with Adobe Reader Products and (ii) modify or save a PDF (Portable Document Format) document (including saving any modifications to a separate file for such documents);"
Does this mean that I am NOT allowed to develop a program that both:
Interfaces with Adobe Reader/Acrobat via the Acrobat SDK for PDF viewing purposes and
Builds and modifies PDF's using third party component(s)?
If the answer to the previous question is "YES", that means I can only use the Acrobat SDK in a program that is limited to PDF viewing and printing as far as PDF issues are concerned. That would be very restrictive for a real world application that involves PDF's, especially when I am supposed to "add significant and primary functionality" as the license aggreement also states.

How do I go about contacting "Adobe Legal"?
Also, just to clarify our discussion on some subtle but important points . . .
I understand that Adobe Reader is just that, a read-only application. And, I understand that the Adobe solution for modifying PDF's is Adobe Acrobat. I have components from 3rd parties that let me programatically modify PDF's. So, from a strictly programming tools point of view, I don't need Acrobat to modify PDF's in my application. The 3rd party components handle the PDF modification tasks. I'm not trying to use the Acrobat SDK to modify PDF's, but rather only to view PDF's.
So, when you say:
"You can NOT use Reader to view PDF documents as part of a software solution that also modifies the PDF using some other technology"
Do you mean:
It is your understanding that using the Acrobat SDK for PDF viewing and 3rd party components for PDF modification in the same application constitutes a violation of the Acrobat SDK License Agreement?
And when you say:
"Acrobat, however, does not have this limitation"
Do you mean:
Adobe requires licensed Acrobat to be used for PDF modification in any application that uses Acrobat SDK for PDF viewing? (In other words, PDF modification is where Adobe wants to make a profit.)
Thanks for your input.

Custom login question

C:\Program Files\Microsoft SQL Server\MSRS12.MSSQLSERVER\Reporting Services\ReportManager
C:\Program Files\Microsoft SQL Server\MSRS12.MSSQLSERVER\Reporting Services\ReportServer
Which of these two folder contains the web.config that must be modified when adding custom login/ forms authentication?
When and how is the AuthCookie used? Do I need to add any info to the ssrs auth cookie?
scott

Hi scott_m,
According to your description, you want to add a custom login form authentication and use AuthCookie. Right?
In Reporting Services, if we want to add custom login form, we need to modify the web.config in ReportServer folder. For the modification in configure files and usage of authcookie, please refer to the links below:
http://www.codeproject.com/Articles/675943/SSRS-Forms-Authentication
http://msdn.microsoft.com/en-us/library/ms345241.aspx
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Custom initramfs questions

Hi, I have been playing around with initramfs and created my own (very, very basic) to learn more about how it works. I am using GRUB 2 and the MSI Wind U100 laptop.
I have a few questions I haven't been able to found the answer to yet, maybe you could help?
1. When I pass a wrong pathname to the GRUB 2 initrd line, I get a kernel panic as the file cannot be loaded, which is Ok. But, I can't reboot the computer with the CTRL+ALT+DEL key combination. Is this because the keyboard driver hasn't been loaded by anybody yet? The only thing that works is to power off the computer the hard way with the power button. I guess it works because it is a hardware switch and no driver is necessary?
2. It seems I must use the 'initrd /boot/initramfs.cpio.gz' GRUB 2 line. But, the https://www.kernel.org/doc/Documentatio … meters.txt site mentions the kernel 'initrd' parameter. When I remove theGRUB line and use the kernel param to point to my ramfs, though, I get a kernel panic. It seems the only way to make it work is to use GRUB 2 to instruct the kernel where the ramfs is. How does this really work?
3. When my ramfs looks like this:
bin/busybox
lib/ld-linux.so.2
usr/lib/libc.so.6
init
and the init code is:
#!/bin/busybox sh
exec /bin/busybox sh
it can actually boot and here is what I get:
can't access tty; job control turned off
What does need to be done to have job control? I think the same message is displayed in Arch's rescue shell, I think I've seen it.
4. I can now see the shell and the command prompt, but I cannot type anything. Is the reason the same as in #1, i.e. no drivers loaded yet?
Regards.
Last edited by wujek.srujek (2014-10-01 09:28:54)

Hi. Thanks for your comment. I read the page you linked and a few others, and I'm getting closer, I think.
I was able to add the keyboard to early userspace by either adding the 'atkbd' module and its deps, or the 'keyboard' hook. However, I can't make it work in my custom initramfs.
Here is the contents:
$ find -type f | sort
./bin/busybox
./bin/find
./bin/kmod
./bin/mount
./init
./lib/ld-linux.so.2
./lib/modules/3.16.3-1-ARCH/kernel/atkbd.ko
./lib/modules/3.16.3-1-ARCH/kernel/i8042.ko
./lib/modules/3.16.3-1-ARCH/kernel/libps2.ko
./lib/modules/3.16.3-1-ARCH/kernel/serio.ko
./usr/lib/libblkid.so.1
./usr/lib/libc.so.6
./usr/lib/libm.so.6
./usr/lib/libmount.so.1
./usr/lib/libuuid.so.1
./usr/lib/libz.so.1
and here is my /init:
#!/bin/busybox sh
echo Creating links
/bin/busybox --install -s /bin
ln -s /bin/kmod /bin/modprobe
ln -s /bin/kmod /bin/lsmod
echo Mounting /proc
mkdir /proc
mount -t proc dummy_proc /proc
echo Mounting /sys
mkdir /sys
mount -t sysfs dummy_sys /sys
echo Mounting /dev
mkdir /dev
mount -t devtmpfs dummy_dev /dev
echo Loading modules
modprobe serio
modprobe libps2
modprobe atkbd
modprobe i8042
lsmod
exec sh
As you can see, I'm packaging very little and creating all the links to busybox and directories at runtime, in the scrip (is this Ok?).
The /proc, /dev/ and /sys mounts are populated.
The script actually executes without error, but the lsmod command near the end results only in the lsmod column headers (i.e. not module has been loaded). But I don't get any error etc.
Could you give me a pointer what is missing?

Custom cmdlet questions

Hi,
I was looking at a ps1 file someone else wrote. It contains what looks like a custom cmdlet - 'Restart-AXAOS'.
This is to restart a microsoft dynamics service. The question is, how is this defined and created in the first place. I cannot find a reference to it. There is the main ps1 file and a config file but it is in neither. Has someone created this as an assembly
and registered it on this server? How is the functionality if this cmdlet defined?
Thanks a lot.

Hi Damon,
this cmdlet is part of the DynamicAxCommunity Powershell Module (here an
Introduction). Either the module is imported somewhere in the script using Import-Module, or it's used in Powershell 3+ where Modules are loaded automatically as required.
If the script is working that means it's installed somewhere on the executing computer, I'd recommend checking the Module folders ($env:PSModulePath will show you where).
If it's a script-module, you can simply read the function in your favorite script editor. If it's a compiled module, you'll need a library inspector, such as ILSpy, to read just what it's doing.
Cheers,
Fred
There's no place like 127.0.0.1

Repurchase agreement question

Hello experts,
Sorry to bother you again, but I have a question related to a repo's.
Problem is:
I buy a bond A of 60m u20AC and decide to give in repo 40m after one month.
I understand that the used security bond A should change form "status" then, meaning that 20m u20AC should still be available to put in repo while 40m u20AC should be blocked for any other actions on it (a new repo or security account transfer).But my assumption can be false on this one?
But how can we report this? I do not seem to find any report that displays this information?
Many thanks in case of help it really puzzles me
Kr,
Stef

HI Venkat,
***So if i have to FTP my file should i need to have a business system which has got all the ip address and all in the SLD?
As I mentioned , it is just a logical name. It is not required to mention the IP address for any thirdparty systems. ANyway XI is not looking for that during runtime.
So you can use any business systems created in the SLD of type thirdparty.
because in receiver agreement its asking for a receiver service,so will the business name i have given in SLD be the service name i should give?
Wherever Service is there, you need to mention the Business System or Services created in the Directory . If you have Buisness System created already, first assign that Business system to your Configuration Scenario, This can be done by right clicking on the Service Without Party under your Configuration Scenario.
say if i have a idoc coming into xi from SAP system what type would it be?
>>>>It is Outbound Interface
 And if i am sending a file out of XI to another system,my understanding is it should be inbound,as its inbound to another system.
>>> You are right. If message is coming out from XI(XI is sendig some message), then it should be Inbound Interface. If message is coming In to XI, then it is Outbound Interface.
Above is wrt XI.
Don't confuse it. .Even you can think wrt R/3 or Thirdparty also.
Hope this helps,
Regards,
moorthy

Customer agreement with organization through SAP System

Dear Gurus,
I have got a requirement from my client.
there is an agreement between customer and company that they will do business for the period of one year. After one year, the customer needs to renew their agreement with company for the next year to keep on the business process. This agreement is a manual process.
Now the requirement is need to full-fill from SAP system. They require search criteria also to know the expiration of agreement of customer with company before a month.
Can anyone help me on that, kindly suggest how can i achieve this in SAP?
Rgds

Hi,
If there is no sales involved..just pick up any cond type with the required fields like customer code etc..it'll have validity periods as well.. and you can always view them using VK13--condition info.
If there is no sales with that customer, the cond record wont get picked up..
Alternatively, create a rebate agreement with customer and validity periods and etc..do not maintain any rebate cond records.
This should also work for your scenario though am curious to know what business if not sales?
Regards
Raghu.

SampleSales.RPD Customer Dimension Questions

Hello, I am trying to figure out how SampleSale.rpd was built. I am stepping through data element from the physical layer all the way to the presentation layer and am confused about the following:
Question for "Sample Sales" section
- When i expand "H1 Customer Dimension", i see "Total" level and a number of revenue / qty members listed under it. I trace them back to physical layer fact columns and i also see them present in the presentation layer fact section. However, how can i get this attribute (which looks like a fact attribute) to show up under "h1 customer --> Total" level? I see the formula to for each but i am confused how to get this into inside the dimension.
Any help is greatly appreciated.
Regards,

You leave them in place in the Logical Fact.
What you see at the dimension levels are just UI "pointers" to the Logical Fact columns, you can set level based measures manually in the content tab of that measure if you dont fancy dragging (or scrolling) up to the dimension levels themselves.
P.s Suggest you use a splitter in the fact table, just like Sample Sales to make it easy on the eye. Typical splits might be :
-----Measures------
a
b
c
---- Time Based----
a MAGO,
a YAGO,
b MAGO,
b YAGO
---- Level Based----
a (Year)
a (Channel)
etc etc.
--- Derived----
Profit %
Profit £
You can then choose to expose the splitte in the presentation catalog, or use nested Fact tables with appropriate names (see "nesting presentation tables")
Hope this helps !

Project agreement question(pls help, a little bit urgent)

hi,
I created a project on PM and project funding agreement on project billing.
But after I allocated it to a project and saved it, it shown that the amount I entered is allocated but not baselined.
My question is why it is not baselined? what is the meaning of 'baselined'? how to operate to make it to be baselined?
Thanks a lot in advance! ^_^

After i made revenue budget. it is baselined.
question solved. thanks.

Customer Agreement question

Similar Messages

Maybe you are looking for