Customer and Company Codes
Hi,
I have a requirement where i need to have Customers along with the company code the customer belongs to. As far as 0customer and 0customer_Sales are concerned i cannot see any attributes of compnay codes in these infoobjects.
Any suggestion how i can get customer along with the company code with any standard infoobject or otherwise??
Best Regards,
RK
Hi,
when i try to compound the standard infoobject is throwing an error,
InfoObject 0CUSTOMER is referenced from 0BILLTOPRTY, compounding cannot be changed
InfoObject 0CUSTOMER is referenced from 0COMPETITOR, compounding cannot be changed
InfoObject 0CUSTOMER is referenced from 0DEBITOR, compounding cannot be changed
InfoObject 0CUSTOMER is referenced from 0INT_CUST, compounding cannot be changed
InfoObject 0CUSTOMER is referenced from 0PAYER, compounding cannot be changed
InfoObject 0CUSTOMER is referenced from 0RT_CUSTPL, compounding cannot be changed
InfoObject 0CUSTOMER is referenced from 0SHIP_TO, compounding cannot be changed
InfoObject 0CUSTOMER is referenced from 0SOLD_TO, compounding cannot be changed
Characteristic 0CUSTOMER is used as Attribute of 0APO_LOCNO, but characteristic 0COMP_CODE is not
Characteristic 0CUSTOMER is used as Attribute of 0APO_RESNAM, but characteristic 0COMP_CODE is not
Characteristic 0CUSTOMER is used as Attribute of 0BPARTNER, but characteristic 0COMP_CODE is not
Characteristic 0CUSTOMER is used as Attribute of 0BP_GRP, but characteristic 0COMP_CODE is not
Characteristic 0CUSTOMER is used as Attribute of 0FUND, but characteristic 0COMP_CODE is not
Characteristic 0CUSTOMER is used as Attribute of 0GM_SPNSR, but characteristic 0COMP_CODE is not
Characteristic 0CUSTOMER is used as Attribute of 0INSP_LOT, but characteristic 0COMP_CODE is not
Characteristic 0CUSTOMER is used as Attribute of 0NOTIFICATN, but characteristic 0COMP_CODE is not
Characteristic 0CUSTOMER is used as Navigation Attribute of 0BP_ACTIVIT, but characteristic 0COMP_CODE is not
Characteristic 0CUSTOMER is used as Navigation Attribute of 0CRM_SOLDTO, but characteristic 0COMP_CODE is not
Characteristic 0CUSTOMER is used in Communication Structure 0APO_LOCNO_ATTR, but characteristic 0COMP_CODE is not
Characteristic 0CUSTOMER is used in Communication Structure 0CUSTOMER_ATTR, but characteristic 0COMP_CODE is not
Characteristic 0CUSTOMER is used in Communication Structure 0CUSTOMER_TEXT, but characteristic 0COMP_CODE is not
InfoObject 0CUSTOMER (or ref.) is used in data targets with data -> Error:
Characteristic 0CUSTOMER: Compound or reference was changed
InfoObject 0CUSTOMER being used in InfoCube ZZPCA_C01 (contains data)
Pls suggest.
Regards,
RK
Similar Messages
-
FROM WHICH TABLE I CAN FIND GL ACCOUNT NUMBER AND COMPANY CODE OF A PARTI
FROM WHICH TABLE I CAN FIND GL ACCOUNT NUMBER AND COMPANY CODE OF A PARTICULAR CUSTOMER?..I AM TRYING TO POST AN IDOC ..SO DATA HAS TO BE PROPER.JUST TELL THE SOLUTION
Hi rendeep,
1. LFB1
this is the required table.
2. field is AKONT
3. The account number can be different
for different companies.,
hence it depnds upon combination of
LIFNR
BUKRS
regards,
amit m. -
Service for creating customer master - company code data....
Hi
I would like to know if there is a service to create customer master company code data?
I have identified 2 services one for general data (CustomerERPCreateRequestConfirmation_In) and sales area data (SalesArrangementERPCreateRequestConfirmation_In).
Regards
Srinivas DusiHere is the answer: Yes it is possible. Download the file, using option - File Download. File should include all key attributes & also attributes that needs to be updated. (Key here is to have appropriate assignment ID. )
Use the same file for File Upload (modify attributes like Sort Key as required). -
How to get vendor and company code based on logistic invoice document
how to get vendor and company code based on logistic invoice document in abap/4?
Hello Kumar
When you call BAPI_INCOMINGINVOICE_GETDETAIL using
INVOICENUMBER = <number of invoice>
FISCALYEAR = <fiscal year>
the returned HEADERDATA contains what you are looking for:
HEADERDATA-COMP_CODE
HEADERDATA-DIFF_INF
Regards
Uwe -
Which table could search customer# by company code?
Hi,
I found an very strange thing as when i tried to search customer# by company code with XD03 transaction, there always showed 'no values found'.
Anyway, is there any table could help me get corresponding customer list under one company code??
Thank you very much!Thanks Raghu,
Actually i just did that way in XD03 by inputing the co code, then search corresponding customer under that co..
But the strange thing is the system shows no items found..
But in KNB1, there do have many customers found under that co code...
Could anyone know how come this could happen??
Thank you very much.
Edited by: Hoo Laa on Jul 17, 2008 11:10 AM -
Database table/FM to find relation between plant and company code in SRM
Hi,
I have a requirement where I need to determine the relation between the plant and company code in SRM.
The plant and company code both belong to R/3. We are replicating the plant by using the report BBP_LOCATIONS_GET_ALL.
This plant is now available as a BP in SRM. But from which SRM table or using which SRM FM can I get the relation between this and the company code?
Thanks,
SrivatsanHi
<b>Check table BBP_LOCMAP. (Plants) - Manage Table Business Partner > System > Location
BBP_COMPCODE_FAV User-Specific Favorites for Permitted Company code.</b>
Hope this will help.
Please reward suitable points, incase it suits your requirements.
Regards
- Atul -
Hi All,
I need the help of this forum once again.
I am using bapi Bapi_Acc_Document_Post to create KR documents in SAP. The bapi works absolutely fine except for one scenario:
For a particular type of invoice coded to Company "XXXX" with lines having tax code "I0", the bapi returns error message "E 018 : Invalid tax code and company code combination". The tax code "I0" and the company code "XXXX" has been mapped in SAP and if I try to create the invoice manually in SAP using the GUI, the invoice gets created without any issue.
I have tried searching the forum but could not find any post on this topic.
Therefore, requesting the masters to please help me out on this.
Best Regards
Sutirtha RoyHi Gowthami,
how have you solved your problem, because I am facing the similiar issue and trying desperately to post the following combination with BAPI_ACC_POST_DOCUMENT:
001 40 490100 Aufw. aus Marge PP R2 15,92
002 31 10000003 Kreditor R2 15,92-
003 50 175060 Abzugsverfahren USt R2 3,18-
004 40 154060 Abzugsverfahren Vst R2 3,18
THANX!
Regards
Marko -
VAT registration number in combination with country and company code
Hi,
Is there configuration where we can define the VAT registration number with combination of country and company code.
thanx in advanceHi,
Thanx for the reply.bt the issue is like we have a condition type zvat where condition table have the following fields departure country and destination country,The country of our company code is GB and we maintain a record for condition type zvat i.e GB (departure country) to GB (destination country) 17.5%.While creating a contract if vat is applicable we told user to maintain country GB in both the fieds i.e tax departure country and tax destination country in billing tab at header level of the contract .It is working fine for other company where company code country is different then GB.But for this where company code country is GB.An error occurs i.e.There is no vat registration number fot this comapny code XXXX for country GB.
Now how should i go about it? -
Upload of chart of accounts at coa and company code level
dear all
can you tell me how it is best to upload a new chart of accounts both as a chart of accounts level and company code. i am planning to use lsmw but shoud i upload chart of accounts first then company code level?
with many thanks
PeterHello Peter,
If you have single company code then create one LSMW for transaction "FS00" it upload the COA both at company code and COA level. If you have morethan one company code and you want to upload same COA to both company codes then better first COA level with FSP0 then company code level with FSS0 because here you can extend the required GL's from COA to COmpany code.
Regards
Swapna -
Table that gives the relation between plant and company code
Hi gurus,
I actually have plant number and using this plant value i need to get the company code.
Is there any table that gives the relation between plant and company code. So,that i can get the company code details.
Thanks in advance.Hi Bhanuphani,
Use T001K where BWKEY is the plant
Reward if useful
Thanks Arjun -
Valuation at plant level and company code level
Hi,
Can someone explain me the difference between the valuation at plant level and company code level with a real world example?
Regards,
Malsha KalubowilaHi,
Inventory can be valuated at two levels either at company code level or at plant level. If you select valuation at company code level, all materials across all the plants will have same material price since valuation is at only company code level.
Say for example Company code 1000 is buying a material which unit price is Rs. 10 from a vendor who supplies to two different plant A & B of company code 1000. Assume Plant A is situated near vendor premises itself (so freight cost is Re 1 extra) whereas plant B is situated at far away from vendor place (so freight cost rs 2 extra) and both cases freight cost is borne by the company and not by vendor.
Assuming you have selected valuation at plant level, now in plant A same material will be valauted at Rs. 11 (10 +1) whereas at plant B it is valuated at Rs. 12 (10+2).
Whereas if you have selected valuation at company code level, price will not be valuated at plant level rather at company code level which will get updated at moving average price in this case.
So it is always best practice to select valuation at plant level rather than at company code level.
Reg
Karthikeyan G -
Need a output based on document no and company code
Hello All,
I am new to BI and appreciate your cooperation
I have a requirement where in I need a total count based on Document no and company code in the Report where in a document no can exist in multiple company code
Say for eg
Doc No CompanyCode
123456 1000
123456 2000
222222 2000
333333 2000
Now I need the count based on document no and company code in the report. Kindly advice
Thank you
PoonamHi Poonam,
I don't know if this is possible in Query Designer level..
Here is my suggestion:
1. Create a new infoobject that will be used for the combined Doc No and Comp Code
2. In transformation level, create a field routine that will CONCATENATE the Doc No and Comp Code in the infoobject you have created in STEP 1
3. In Query Designer, make a FORMULA VARIABLE and choose REPLACEMENT PATH (select the infoobject you have created in STEP 1)
4. In replacement path tab, choose INFOOBJECT, then ATTRIBUTE, and select CONSTANT 1 (forgot the exact name but there is constant 1 something in the selection)
5. Create a global CKF with this formula (FORMULA VARIABLE * 1), this is necessary because sometimes the FV doesn't work without doing this
6. Use the global CKF in your keyfigure structure, it will show the number of UNIQUE combination of Doc No and Comp Code
Regards,
Loed -
Hi friends
Can any one tell me the usefullness and functionalities of a company and company code.
Regards
Baluhi,
<b>company & company code:</b>
The smallest organizational unit for which individual financial statements can be drawn up according to the relevant commercial law.
A company can consist of one or more company codes.
All company codes within a company must use the same transaction chart of accounts and the same fiscal year
breakdown. The company code currencies can be different.
A company has one local currency in which its transaction figures are recorded.
company code is highest level of organisation unit in FICO
regards,
Arun prasad
Message was edited by:
arun prasad -
Hi experts
In which Table can I get Both Plant and Company Codes.
Message was edited by:
KapilHi,
Use VBAK and VBAP and u can use MSEG
Regards,
Prashant
Message was edited by:
Prashant Patil -
Client level setting and company code level setting
Hi Friends,
Can you tell me the client level settings and company code level settings in Configuration and master data?
Ex : Material type configuration - client level
Thanks in advance
Rgds
MadhavanDear,
For complete detailed information about SAP MM configuration, you can find on first thread or self exploration through net search.
Please have a look at: http://help.sap.com/SAPHelp_46c/helpdata/EN/e0/71369adc56d11195100060b03c6b76/frameset.htm
Regards,
Syed Hussain.
Maybe you are looking for
-
Home About Us Services Facilities Current Customers Contact Us Welcome to North American Assembly North American Assembly is a customer driven ISO/TS 16949 certified company providing prototype and production plastic welding, assembly & t
-
hmmm- Anyway- I connect to the TV and get my desktop image no problem-beautiful-but that's all. No dock, no menu bar, no desktop clutter, no windows, no pointer. Any ideas? Thanks, S
-
Fetch the data from two tables
hell all i want to fetch the data from two tables, one is from internal table and another one is data base table. what syntax i have to use either FOR ALL ENTRIES or INNER JOIN?
-
Hi Guys, Need your help regarding external tables, I'm using Oracle 10g. I have tried using external tables and almost all of them works except for one. It has a null data on the last field. Kindly check what am I missing. CREATE TABLE X_MHC_FCSDOC2P
-
Commands/Import, Import from an SD card
I want to import directly from my SD card. I can't do that if I go File/Import/Files, which would seem to be the place to go. Instead, I find hidden under the Final Cut Pro menu/Commands/Import and that works. That seems awful strange to hide it ther