Customer attributes creation for interface scenario ?

Hi Experts,
I want to create customer attributes in the interface scenario in dswp transaction.
I was able to create one using the SPRO transaction. but it does not allow me to add further.
Can anyone tell me how to resolve this or give any useful blogs, as i am a beginner.
Thanks,
Shamly
Edited by: Shamly MM on Jun 9, 2010 10:10 AM

Hi,
Are you looking for Application Monitors and Customer exits for your requirement. May be this [guide|https://websmp110.sap-ag.de/~sapdownload/011000358700006184412006E/Setup_Guide-Customer_Exit.pdf] can help you.
Hope this helps.
Regards,
Jagan

Similar Messages

Test Plan For Interface Scenarios

Hi Team,
I have maintained the interface scenarios in SOALR01. This "Interface Scenario" is the standard node in Solution Manager like "Organizational Units", "Master Data" & "Business Scenarios". But in STWB_2 (Test Plan Creation), the interface scenarios are not listed for selection.
Can anyone please let me know the reason?
Note: I am using Sol Man 7.0
Thanks

Do you have some more details about the equipment and setup you want to test.

SALERT_CREATE -custom alert creation for validation

Hi,
I have done one scenario,in which i have used the custom alert creation calling the SALERT_CREATE function module from my udf.That is doing fine but now i have an understanding problem that, in the udf we need to use one RFC receiver comm channel,what is the use of that.As the function module we access is already present in PI server itself.
In case of RFC lookup when we access RFCs from remote server there we need one RFC receiver comm channel..that is valid but why in this case.
Can anyone please clarify me.
Cheers,
Abhishek.

Solved itself.

Customizing performance threshold for interface utilization in LMS 4.0

Am running LMS 4.0, i want to customize performance threshold for interface utilization from the default 40% to x%, please help.

Based on your other post, I think you're talking about Device Fault management. You can go to Monitor > Fault Settings > Setup > Threshold Settings, and select the DFM > System Defined Groups > Interface and the interface type you want, then edit the thresholds for this group. Change the default utilization threshold from 40% to your desired value. Save your changes, then go to Monitor > Fault Settings > Setup > Apple Changes to apply them.

Reports -- Creation for the Scenarios Mentioned

Hi All:
I need to create a Report and Dash Board using the following scenarios as mentioned below, Please let me know the procedure for the same.
Region Wise Lead Reports
1 Region
2 Lead amount
3 No of leads
4 Subtotal
5 Grand total
Top 10 Performer Report
Account Owner, Region, Location, No. of Leads, Lead Amount
Pipeline by Lead Status
1 lead Status
2 lead Name
3 Owner
4 Account Name
5 lead Closure Date
6 Expected Closure Date
7 Amount Display
8 Sub Total
9 Grand Total
Any help appreciated.
Warm Regards,

Please post this question in the CRM On Demand Analytics and Reports forum. Thanks for your help.

Custom Jar creation for SIM customizations

Hi,
Can anyone tell me how to create a custom jar for SIM customizations
( which has been done by using extension methodology ) and where to put it so the custom code is picked up first rather than the base code.
Thanks,
Susmita

sim-1311-impg1.pdf says:
Build/Packaging/Deployment Related
To build and deploy the customizations correctly, make a separate project for
custom-modified code. Make sure any existing Java files that are going to be altered
have the exact same class structure as the base code within this new project. New or
additional Java files might have a class structure that makes sense for the new code.
Build a custom JAR with the modified or newly created code. This custom JAR should
be placed first in the execution classpath so that classes found within the JAR are
chosen by the JVM rather than the base classes. This will require unsigning and
resigning all the JARs in the SIM-client application, since all JARs must be signed with
the same signature for Web Start to work correctly. Consult the jarsigner
documentation from Sun for further information on the JAR unsigning/signing
process.
Hope this helps,
Best regards,
Erik Ykema

Issue with Sorting by Custom Attributes

In our custom SES query application, I am trying to implement sorting at the custom attribute level. I am having difficulty in understanding exactly how to set the options on doOracleOrganizedSearch() to achieve the desired result.
We have a table based content source and allow a user to search via custom search attribute. We are also going to allow them to sort by custom attribute.
For example, say we have a Project content source and one of the attributes is "Client Name". Users are going to be able to sort by client name (A-Z and Z-A). I have a prototype working but it only seems to work if I set topN to a very high number.
I want to bring back the first 10 documents sorted by Client Name A - Z and allowing paging to the next set of sorted results. My prototype works if I set topN to 1000 (more than the # of results) but does not work if I set it to 10 (# of results I want to display per page).
Below if my code. Note I am not setting the group attribute or the cluster list. Perhaps this is the issue?
Many thanks in advance!
OracleResultContainer results = service.doOracleOrganizedSearch
(this.m_query, // query
this.m_docsRequested, // topN
this.m_startIndex, // startIndex
new Integer(10), // docsRequested
this.m_dupRemoved, // dupRemoved
this.m_dupMarked, // dupMarked
this.m_searchDataGroup, // groups
this.m_queryLang, // queryLang
this.m_docLang, // docLang
this.m_returnCount, // returnCount
this.m_filterConnector, // filterConnector
filters, // filters
this.m_fetchAttributeNames, // fetchAttributeNames
null, // searchControls
null, // groupAttr
this.m_sortAttributes, // sortAttrList
null); // clusterList

Hi Nikola,
in 9.0.1 even if you rewrite the web interface you can't sort files by custom attributes setting a SortSpecification to a Folder. You can only sort by base attributes with getItems(). To get item sorted on custom attributes you must perform a search (a lot more codelines).
Regards, Alessandro

How to enable Custome Attribute

We wanted to create custome attribute for Version dimension in planning appliction but this option is disabled in planning web for this dimension property.
How to enable the custome attribute option for version dimension in Hyperion Planning application(11.1.2.1).
Thanks in Advance,
ID
Edited by: 818693 on 17 Jun, 2011 2:48 AM

Hi,
I'm not sure at all, but due to te fact that Version is a specific planning dimension, you may not add an attribute dimension on it.
If in Planning Administration, Dimensions page, you select your version dimenion. If you click on dimension, do you see a button "add attribute" appearing ? You may try on Entity dimension.
If you see it in Entity, and not in Version so it means you can't add an attribute.
Regards,

Assistance with Powershell custom attribute population

I'm currently undertaking an exchange 2003 to exchange 2010 migration and as part of this am having to redesign the email address policies. Our legacy recipient policies have worked well by targeting exchange alias but in 2010 this won't work.
We have a number of exchange domains and in order to update the email addresses for a group of users we have decided to use custom attribute 15 to target these AD groups, however updating this manually for over 2000 users would prove very time consuming.
Exchange 2010 seems to be geared towards powershell and as it's still early days in my knowledge am looking for assistance.
Does anyone know a powershell command I can run to update custom attribute 15 for users of a specific security group?
Many Thanks

I am no exchange expert but also not sure what you mean by custom attribute 15. Since you want to update "users" in a specific "group" I assume this will be in Active Directory?
If so, you can use the AD cmdlets to get the job done. On a machine that has AD users and computers installed you can do something like this:
Import-Module ActiveDirectory
Get-ADGroupMember -Identity groupName | ForEach-Object{
Set-ADUser -Identity $_ -Replace @{customeAttributeName = "Replacement"}
This hasn't been tested as I do not have an environment to test in, and not sure on the custom attribute name or what needs to be replaced with, so you will need to replace groupName with the group in question, customAttributeName with the correct name and
"Replacement" with what you are replacing.
If you find that my post has answered your question, please mark it as the answer. If you find my post to be helpful in anyway, please click vote as helpful.
Don't Retire Technet

How to extend the WebUI product search results with customer attributes

Hello,
We are using CRM 7.0. We want to extend the WebUI product (Object) searches with customer attributes and to display customer attributes in the search results. We found the note 1026956 that explains how to extend the WebUI product (Object) searches with customer attributes. We want to know if there is also some note that explains how to display customer attributes in the search results for products/Objects.
Thanks in advance,
Sergey Kozyrev

Sergey,
I doubt whether there exists such note. The note 1026956 which you mentioned is for enhancing the Search for Custom attributes. For Enhancing the Result list you need to do custom development.
Regards,
Harshit

Interface scenarios - new attributes for adapters

Hi,
sinde sp15 we have a new tab interface scenarios in solman
and there are many adapters lile: EDI, XI adapters, etc that
we can use in those scanarios with special attributes
for each of those adapters
if there any chance to add some new attributes in standard
to those tabs ?
thank you,
Regards,
Michal Krawczyk

Hi Michal,
On a related note, I would suggest you to read [this|Interfaces and Interface-Scenarios in Projects; thread, if it's useful for you.
Coming to your specific question, by new attributes do you mean new technologies being listed in the list of values ?
If so, yes you can add them (though there will be a standard warning message from SAP) in the view tables version of the following tables, from SM30.
DIR_IFTECHATTGRP     Solution Dir: Interface technology and Attribute groupe
DIR_IFTECHTOATT     Solution Dir: Assignment of Attributes to Interface techno
DIR_IFTECH_TYPE     Solution Manager: Interface Techno
DIR_IFACE_TECH     Solution Manager: Interface Technology
Trust this helps to answer your question.
Best regards,
Srini
Edited by: Srinivasan Radhakrishnan on Oct 2, 2008 11:03 AM

Customer-specific attributes (properties) for processes?

Hello community,
I already know how to define customer-specific attributes (properties) for documents stored in Solution Manager using the Document Modelling Workbench. For documents, everything works fine, so far.
But: I also want to define customer-specific properties for processes. Is this possible? If yes, how do I do that? I cannot find any related configuration options -- neither in SPRO nor in Solution Manager's own project configuration area.
Thanks in advance,
Thomas

Hi,
In SPRO, naviagete to SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Scenario-Specific Settings -> Implementation/Upgrade -> Blueprint and Configuration -> Object Attributes -> Definition of Customer Attributes for Object Types
Best regards,
Jacques.

Issue while running a custom package:ORA-20100: File o2670336.tmp creation for FND_FILE failed.You will find more information on the cause of the error in request log. in Package PA_OPPORTUNITY_MGT_PVT Procedure modify_project_attributes ORA-20100: File o

Hi Guys,
We have created a custom package where in we are trying to call the standard API's of Oracle projects i.e PA_PROJECT_PUB.When we are trying to call these APIs we are facing the below issue.
We have tried testing in two instances ,Initially it worked in both instances.
Using the same API's multiple times we tested the same data set in these instances.
For the first few runs it works fine.But when we go on using the same API's again and again for our testing we face now and then the below issue.
Standard API's
=========
add_task
update_project
change_structure_status
create_draft_plan
Error:
ORA-20100: File o2670336.tmp creation for FND_FILE failed.You will find more information on the cause of the error in request log. in Package PA_OPPORTUNITY_MGT_PVT Procedure modify_project_attributes ORA-20100: File o2670336.tmp creation for FND_FILE failed.
You will find more information on the cause of the error in request log. in Package PA_PROJECT_PUB Procedure update_project:ORA-0000: normal, successful completionError while publishing the task
Please let us know if anyone of has come across the same situation.
Regards,
Vijay

But have issue only with validating invoice batch. I followed metalink ID's 605542.1, 167990.1,261693.1,1088553.1,749491.1, 461271.1 and few more.Was this working before? If yes, any changes have been done recently?
Please see if these docs help.
APXAPRVL: Invoice Validation Errors With MSG-00001 and REP-1419 [ID 333305.1]
Invoice Validation Errors When Others:101505:Non-Oracle Exception Rep-1419 [ID 464125.1]
Invoice Validation Fails with REP-1419 Error in Ap_approval_matched_pkg.Execute_matched_checks [ID 293425.1]
Invoice Validation Failing On Fnd_file Could Not Write To File L0202306.Tmp [ID 461520.1]
Invoice Validation (APPRVL) Errors ORA-20001 APP-SQLAP-10000 PSA_FUNDS_CONTROL_PKG.glxfck [ID 463184.1]
Validate Invoice Error With ORA-20001: APP-SQLAP-10000: AP_FUNDS_CONTROL_PKG.Calc_QV [ID 432702.1]
Invoice Validation Program Is Erroring Out [ID 382844.1]
Error On Validation Of Invoices From Previous Periods [ID 412814.1]
Thanks,
Hussein

While doing LSMW standard method for Customer master creation..

while doing LSMW standard method for Customer master creation.....
In 13th step I am getting this king of error
FB012 Session 1 : Special character for 'empty field' is /
FB007 Session 1 session name ZPROJ was opened
FB109 Trans. 1 : Transaction xd01 is not supported
FB016 ... Last header record ...
FB014 ... BKN00-STYPE 1
FB014 ... BKN00-TCODE xd01
FB014 ... BKN00-KUNNR
FB014 ... BKN00-BUKRS
FB014 ... BKN00-VKORG A1
FB014 ... BKN00-VTWEG 00
FB014 ... BKN00-SPART 0
FB014 ... BKN00-KTOKD
FB014 ... BKN00-KKBER BP01
FB013 ....Editing was terminated
Can anyone help how to solve this?

Hello TJK,
FB012 Session 1 : Special character for 'empty field' is /
This is the special function in LSMW, for empty field system will put / sign automatically, so you need not to worry about that.
FB007 Session 1 session name ZPROJ was opened It is opening session ZPROJ which is your project name/object name.
FB109 Trans. 1 : Transaction xd01 is not supported
Check out your field mapping and conversion rule for object.
FB013 ....Editing was terminated
It is not finding proper field mapping rule / file inputs so the sytem terminates the LSMW object.
Check your field mapping and conversion rule, check your source fields, save the file in tab delimited format.
Hope this helps.
Regards
Arif Mansuri

Creation of Custom Attributes in org structure

Hi All,
I was creating custom attributes that could be displayed in PPOMA_BBP. I tried to create it in table T77omattr, but it doesnot show up in the org plan.
Can somebody provide insight on this and let me know what i need to exactly do in order to create a custom attribute and allow for changes in the org plan?
Thanks
Sunny

Hi SRM guru,
I am also having a same requirment ...
We have a requirement to create the custom attributes in T770mattr for EG employee number.
I have to specify a field name to for entries to be made in table TT77oMATTR. where do i create the field name?
We have a requirement to match the custom attributes to a custom field developed on the shopping cart screen.
if u suggest me how u have achevied the same, then i can also follow the same.
Please help me asap.
my mail id is [email protected]
Thanks and redards,
Mani

Customer attributes creation for interface scenario ?

Similar Messages

Maybe you are looking for