Customer Calls and AR Notes

Do we have any API for Customer Calls and AR Notes conversion?

Not sure. If you are on R12 check the metalink note 558951.1...

Similar Messages

In incoming call, why iphone 4S (ios 7.04) sometimes gives option to decline the call and sometimes not?

In incoming call, why iphone 4S (ios 7.04) sometimes gives option to decline the call and sometimes not?

Try to do this experience.
Ask a person with a block phone to call you and the option to reject doesn´t appear. Try with a non-blocked phone and the option of reject appears.
I think it´s an iOS 7 problem.

My 4s Goes to speakerphone automatically while calling and does not go back to normal even after disabling speaker while calling

My 4s Goes to speakerphone automatically while calling and does not go back to normal even after disabling speaker phone button
AlsO sometimes I. Cannot hear anything in normal speaker even though the call Is going through and has been re ieved on the other end, I have to enable speaker and then disable it to route audio to normal speakers

I think that it is something wrong with kernel and graphic drivers but i'm not able to solve it from the beginning of using of Arch by me.
I'm not so sure this issue is software-related only because in my case it seems the laptop screen enters power-saving mode (10-min timeout) on its own without any events logged (as shown by dmesg) so my next thought was OK, I'm going to get rid of this issue disabling the screen power-saving timeout in the BIOS and set it to never power down or something like that and from then on managing power mode manually; ie: when I want to power down I will just use systemctl suspend/hibernate which work fine ... problem is: there are no related options in my BIOS for such timeout.
The only timeouts I have are in /etc/systemd/logind.conf set to 30min (#IdleActionSec) (commented) by default so these are not in effect because the screens goes blank after 10m which is less than the (default) 30m in logind. Maybe setting loggind to 9m (un-commented) to catch the event before the machine-default one ?
IdleActionSec=9min
IdleAction=suspend
Will check it and report back.

Why does Adobe promise return calls and then not do so?

Why does Adobe promise return calls and then not do so? To avoid talking with customers?

Thanks for your reply - unfortunately I have talked with an Adobe
representative in India and their action is to put one on hold
indefinitely. I am annoyed because I paid an additional $60 to them
for no reason. Appreciate your comment.
des

3GS died/froze mid-call and will not boot back up

I was on the phone earlier today, and my iPhone 3GS suddenly dropped the call and died. I pushed the power button, and then got the Apple logo screen. The Apple logo screen lasted for an hour, until I tried holding both the power and home buttons several times (both in and out of silent mode), to no avail. When I got home, I plugged it in, but iTunes doesn't recognize it.
I've also tried restore mode, but then it sits with the low low battery screen for about two minutes, and then its back to the logo screen. Help! I haven't installed any new apps in weeks, and this is the first problem I've had with it.

First charge it for a couple of hours using the wall charger, not a computer.
Then hold HOME and SLEEP for 12 seconds to see if it will reboot. If it doesn't restart your computer, connect the dock cable to a USB 2 port on the back of the computer (not a hub or the keyboard) but do not plug it in to the iPhone yet. Hold the HOME button (only) while plugging it in to the dock connector and keep holding. After a couple of minutes you should see an icon on the screen showing a connection to iTunes. Release the HOME button and wait. iTunes should connect and restore the phone. If it doesn't you have a hardware failure and need to get it replaced by Apple.

Custom Tag and Attribute Not Found

Hi,
I've been getting an error with the following code in a JSP called cardDeclined.jsp...
<gwps:log level="ERROR" message="<%= request.getAttribute("errorMessage") %>" />gwps:log is a custom tag and errorMessage is a request attribute set in a servlet that includes my JSP. When I execute the program, I get a message from the servlet container (Tomcat 3.2.3) stating that "attribute 'errorMessage' has no value".
I wrote some test code that dumps out "errorMessage"; that seemed to work. The JSP request object has a value for "errorMessage." So, I now use the following workaround...
<% String message = (String)request.getAttribute("errorMessage"); %>
<gwps:log level="ERROR" message="<%= message %>" />I'm looking for a reference describing how request and session variables can be passed to the custom tag
Thanks,
CW

I think you might be having a problem with the quotes. Try this instead:
<gwps:log level="ERROR" message='<%= request.getAttribute("errorMessage") %>' />
Notice the single quotes around the scriptlet.

Placed calls and messages not showing on-line

I'm the account administrator of 2 lines so I can see calls and messages that the other line makes except I can't figure out why some do not show up. Can anyone help me with this?
Example: I was present when my family member received a call/hung up when it rang so I went on-line to see who was calling. No such time nor details. So I called another family member to see if that call would show up and sure enough it did.

Was the call actually connected? The family member answered the call and then the caller hung up?

3230 out and in coming calls and sms not being pro...

No out and in coming calls and sms are beeing being processed.Rest all functions are working. I am presently using BSNL services. It works with VODAFONE SIM only .I tried by using other SIM cards of different Service providers but does not work.
Any Solution ???
Message Edited by kia3230 on 04-Apr-2009 04:20 PM

i am now in Australia and SMS to my friend in Thailand, been charged but friend did not get my SMS, how can i claim the charge back?

My phone wont recieve calls and its not on do not disturib and not on airplane people tell me its like iv declined there call or blocked them and i checked and i havent blocked anyone please help

my iphone wont recieve calls and i checked and its not in airplne mode and do not disturb is off and people have told me that its like ive declined there calls or blocked them and i checked and have not blocked anyone please help

You ARE roaming. You turned off your data, but you are still roaming when making calls, and texting. If you blocked all roaming then you wouldn't be able to make calls/text or receive calls/text.

I downloaded the version 6.1.2 on my iphone 4 after that it couldn't receive calling and can not call and on the iphone compaires te voice : "NO SERVICE"

I downloaded the version 6.1.2 on my iphone 4, after that on the phone compairs the voice : "NO SERVICE", i can connect on internet but i cannot call and cannot receive callings.
How can I resolve the problem?

This phone was purchased direct from apple, so came unlocked. My sim card is from o2 in the UK and the phone works OK when on the o2 network. But when roaming in Europe as I do every weekday the signal consistently drops out and the phone reports "no signal" when in fact there are usually several networks available. I've done a restore and a total reset and it still doesn't work. Any help greatly appreciated.

Incoming Calls and Texts not recognized by Phonebook

Hello,
I just bought an iphone today. It is unlocked with 1.1.4 version. It is also jail broken. I bought the phone in lightly used condition. Today i started entering in all my contacts which was easy, however, whenever i recieve a call or text, it shows the phone number of the sender/caller, instead of showing their name. Even if the number is formatted the same in the contacts list. Its just not syncing. I know nothing about iphone. any and all help is appreciated.
i dont even know what jailbroken is?!
Thanks!

I am having the same problems. Called Apple and they told me to turn off 3g. I just paid $599(already had a contract) for a 3g phone that I can't even use 3g on. I use this phone for buisness and this is unacceptable. Does Apple do any Q/A on thier updates? The previous update bricked my phone. What a joke. I will never buy an Apple product again.

Why Service Call and why not call Function module Directly in WD ABAP

Hi,
I have created a Webdynpro applications and the logic requires calling avrious Function modules.
Do I need to create Service Call for each Function module or call them directly.
It would be great if you can suggest me under what cases I need to opt for Service call
For example, if I use 'RP_CALC_DATE_IN_INTERVAL', do I need to use Service call or call function module directly.
Note: I have searched forums but could not get the correct answer which I want
Thanks!

The Service Call is really meant to be a wizard/time saver. It has the advantage that it can generate matching context nodes/attributes for the interface of the Function Module you are calling. However everything that the service call does can also be created by hand.
Personally I'm not a fan of what the service call wizard generates. Its good as a time saver or for beginners, but I find I prefer to touch up the code it generates anyway. I much prefer to create a nice reusable model class with its own unit test and then consume this model class (with the service call wizard) from WD. This model class might contain one or more function module calls depending upon what logic I need to access.

Only one Oracle form is not calling and also not giving any error.

I have made many form using oracle internet developer suit 10g R2, all are working fine. few days ago developed one form and deployed on the application server 10g R2, while calling from the menu no response and no error and after calling this form no other form is calling. it works 2-3 days initially after that it happens . Please give expert suggestion. Thanks in advance
It is running through the form developer but not running while calling from the menu. i have also giving the message at different trigger. msg is commimg from pre-form but not comming from the when-new-form-instance.
Edited by: user8161431 on Sep 24, 2012 5:30 AM

thanks for your reply, java version 6 u22 and no ON-ERROR trigger written in the form.
the content of java console is
Exception in thread "AWT-EventQueue-3" java.lang.NoClassDefFoundError: oracle/bali/share/sort/StringComparator
     at java.lang.Class.getDeclaredMethods0(Native Method)
     at java.lang.Class.privateGetDeclaredMethods(Unknown Source)
     at java.lang.Class.getDeclaredMethod(Unknown Source)
     at java.awt.Component.isCoalesceEventsOverriden(Unknown Source)
     at java.awt.Component.isCoalesceEventsOverriden(Unknown Source)
     at java.awt.Component.access$500(Unknown Source)
     at java.awt.Component$3.run(Unknown Source)
     at java.awt.Component$3.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.awt.Component.checkCoalescing(Unknown Source)
     at java.awt.Component.<init>(Unknown Source)
     at java.awt.Container.<init>(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.<init>(Unknown Source)
     at oracle.ewt.lwAWT.LWDataSourceChoice.<init>(Unknown Source)
     at oracle.ewt.lwAWT.LWChoice.<init>(Unknown Source)
     at oracle.ewt.comboBox.ComboBox.<init>(Unknown Source)
     at oracle.ewt.comboBox.ComboBox.<init>(Unknown Source)
     at oracle.forms.ui.VComboBox.<init>(Unknown Source)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
     at java.lang.reflect.Constructor.newInstance(Unknown Source)
     at java.lang.Class.newInstance0(Unknown Source)
     at java.lang.Class.newInstance(Unknown Source)
     at oracle.forms.handler.UICommon.instantiate(Unknown Source)
     at oracle.forms.handler.UICommon.onCreate(Unknown Source)
     at oracle.forms.handler.PopListItem.onCreate(Unknown Source)
     at oracle.forms.handler.ComboBoxItem.onCreate(Unknown Source)
     at oracle.forms.engine.Runform.onCreateHandler(Unknown Source)
     at oracle.forms.engine.Runform.processMessage(Unknown Source)
     at oracle.forms.engine.Runform.processSet(Unknown Source)
     at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
     at oracle.forms.engine.Runform.onMessage(Unknown Source)
     at oracle.forms.engine.Runform.processEventEnd(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
Caused by: java.lang.ClassNotFoundException: oracle.bali.share.sort.StringComparator
     at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass0(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     ... 51 more
Caused by: java.io.IOException: open HTTP connection failed:http://10.200.10.19/forms/java/oracle/bali/share/sort/StringComparator.class
     at sun.plugin2.applet.Applet2ClassLoader.getBytes(Unknown Source)
     at sun.plugin2.applet.Applet2ClassLoader.access$000(Unknown Source)
     at sun.plugin2.applet.Applet2ClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 56 more
Edited by: user8161431 on Sep 24, 2012 8:08 AM

NO CUSTOMER SERVICE!!!! I need to talk to a manager in customer service and can not get a phone number or email address. I preferr an email address so I have something in writring. Due to the unprofessional customer service reps and supervisors I have

@

Meshell1403,
We strive to wow our customers with our customer service, I am saddened to learn that this has not been your experience. I am here to help and want to ensure we go over all of your concerns. What's going on? If you prefer to discuss this privately, please send me a direct message.
AndreaS_VZW
Follow us on Twitter @VZWSupport

Custom Look and Feel Not showing up

I've created a new look and feel per the edocs and it's shaping up nicely but when I deploy it to the portal it's great as the default but when I go in to change the LNF as a user It's not an option... Do I need to add it to some random xml file or something for it to show... also is there any documentation with greater detail for look and feel development out there?
Thanks in advance
Whitt

I don't know what the plan is for getting old Dev2Dev sample code on OTN (Oracle Technology Network).
I ran into the same problem yesterday. I needed a quick login portlet for a portal I was fiddling with.
I plucked the login.portlet from the 10.2 installation at <home>/wlserver_10.0/samples/portal/portalApp/contentPresenterSampleWeb/avitek/portlets/login
This sample is an example of using a backing file to handle the logic. The backing file for this portlet is in <home>/wlserver_10.0/samples/portal/portalApp/contentPresenterSampleWeb/WEB-INF/src/examples/visitortools

Customer Calls and AR Notes

Similar Messages

Maybe you are looking for