Customer Coversion Using Interface Table - Error during update

I need to import customers from legacy applicatiion and is planning to use standard customer interface for that. For testing, I am able to create customers with hardcoded values. But while I try to update the same customer record (again using hard coded values), it gives me error and is not generating the error report as well. I am getting the following error during update:
racudc: ORA-20212: Enter valid Billing Fields.
ORA-06512: at "APPS.ADVOAR_CUST
racudc: Error updating customers.
or
racudc: updated 1 partiesracudc: Partyrel 1 parties
racudc: ORA-20210: You have edited one of the following fields, Extended Billi
racudc: Error updating customers.
Also it seems we can not update an address, site_use_code, or PRIMARY_SITE_USE_FLAG using customer interface.
The following is the test record I inserted for updating the customer I created and ran the customer interface:
insert into ra_customers_interface
(ORIG_SYSTEM_CUSTOMER_REF
,INSERT_UPDATE_FLAG
,CUSTOMER_NAME
,CUSTOMER_STATUS
,LAST_UPDATED_BY
,LAST_UPDATE_DATE
,CREATED_BY
,CREATION_DATE
,ORIG_SYSTEM_ADDRESS_REF
,ADDRESS1
,CITY
,COUNTY
,STATE
,POSTAL_CODE
,COUNTRY
,customer_attribute13
values
('APP1-492503' --ORIG_SYSTEM_CUSTOMER_REF
,'U' --INSERT_UPDATE_FLAG
,'Pizza Hut - CDH TEST4' --CUSTOMER_NAME
,'A' --CUSTOMER_STATUS
,-1 --LAST_UPDATED_BY
,sysdate --LAST_UPDATE_DATE
,-1 --CREATED_BY
,sysdate --CREATION_DATE
--,'Y' --PRIMARY_SITE_USE_FLAG
--,'BILL_TO' --SITE_USE_CODE
,'APP1-492503-ADDR1' --ORIG_SYSTEM_ADDRESS_REF
,'1 River Road, Bldg 1' --ADDRESS1
,'SCHENECTADY' --CITY
,'SCHENECTADY' --COUNTY
,'NY' --STATE
,12305 --POSTAL_CODE
,'US' --COUNTRY
,'55'
I am testing this in 11.5.10 env. Any help on this is appreciated.
Thanks,
MK

Convert only the data you need. And the data you need is probably less than you think. For example, other than open invoices (invoices for which money is still owed), you probably don’t need to convert ANY old invoices. You may want to convert data on what was purchased (e.g., event registration, membership, product, etc.) but the actual details (e.g., payment type, payment date) are probably no longer significant.
http://www.e-datapro.net/data_conversion.htm

Similar Messages

ME 808: System error: error during update Table EKAB

Hi,
Couple of years ago, during carve out, one of the contracts was deleted.
A PO created against that contract carries some open quantities. Now our purchasing wants to close this PO, either by changing the quantity to delivered quantity (delivered quantity is lesser than PO quantity), or by checking the delivery complete box. But they are not able to do so, as there was no contract number exists in the system table.
I propose to create a contract with the same number mentioned in the PO and then to change the quantity in the purchase req and PO. However now the system issues a dump error message "ME 808: System error: error during update Table EKAB".
Can anyone help how to resolve the issue?
Any body had similar situation?
Thanks for your help.
Regards,
Shiva

Hi,
I am not sure how the external consultants deleted this contract during carve out.
Our division was bought out from another company and moved the data to our SAP system.
I checked the OSS and found note 922427 could resolve the issue.
Thanks for your response.
Regards

Error during update of Table VBAP (RC= 4, Key= 5096672)

Hello experts,
i am getting error as
Update was terminated
System ID....   Q70
Client.......   999
User.....   HPROLLSD
Transaction..   VA02
Update key...   4EF9258A885201B1E10080000A140014
Generated....   28.12.2011, 18:08:25
Completed....   28.12.2011, 18:08:25
Error Info...   Error during update of Table VBAP (RC= 4, Key= 5096672)
Please help me on this issue.
Regards
Narendra

Hi,
Relevant issue,go through the link it could be help you.
Express document "Update was terminated" received from author
Ram

Import invoices using interface table

Dear all ,
I want to import invoice from legacy system to oracle EBS R12 , and i use interface table to import the invoice.
The problem is when i run Payable open interface import concurrent program to import the invoices , it didn't import any invoices
and the report output didn't show any error or any data according to the invoices.
Report output :
Report Date: 27-JUN-2010 11:25
Page: 1
Payables Open Interface Import Report
Hold Name:
Source Name: Manual Invoice Entry Hold Reason:
Group: GL Date:
Purge: No
Summarize Report N
Report Date: 27-JUN-2010 11:25
Page: 2
Payables Open Interface Import Report
Hold Name:
Source Name: Manual Invoice Entry Hold Reason:
Group: GL Date:
Purge: No
Summarize Report N
So i go to the db and open the interface table and the status was null ,
i dont know why????????

Hi ,
100% org_id problem Please check. Same i faced after i update the org_id it is working fine and showing the output with inovice and rejection details also
Thanks
Venkat

[SOLVED] Error during update of LUKS header on device ./file

dd if=/dev/zero of=./file bs=1M count=200
cryptsetup luksFormat -s 512 -c aes-xts-plain64 -h sha512 ./file
WARNING!
========
This will overwrite data on ./file irrevocably.
Are you sure? (Type uppercase yes): YES
Enter LUKS passphrase:
Verify passphrase:
Error during update of LUKS header on device ./file.
This only happens on my 1TB HDD (GPT, xfs filesystem). I have 2 SSDs that do not throw the error.
I tested using a flash drive formatted as GPT and using xfs filesystem and it worked.
Ideas?
Last edited by not_sure (2013-03-01 02:50:32)

Hmm... I didn't know you could do that. Are you sure it can? https://wiki.archlinux.org/index.php/Di … ison_table
I thought dm-crypt basically did block level encryption.
I guess this is a "virtual partition"? Maybe https://www.linux.com/community/blogs/1 … nux/280174 helps? It seems to mount it as loopback prior to encryption?
Last edited by cfr (2013-03-01 01:07:16)

Trying to update creative cloud, comes error: The installation program could not access the important files / directories. Try to run the installer again. (Error code: 43), please contact customer support. The same error comes updating Muse. Mac 10.9.5. W

Trying to update creative cloud, comes error: The installation program could not access the important files / directories. Try to run the installer again. (Error code: 43), please contact customer support. The same error comes updating Muse. Mac 10.9.5. What shall I do?

Alauda_positos I would recommend reviewing your installation log files to determine the exact directory which the installer is unable to access. You can find details on how to locate and interpret your installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. You are welcome to post any specific errors discovered to this discussion.
For information on how to adjust file permissions please see Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5 - http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.

Loading metadata into EPMA applications using Interface tables-Automation

Hi,
I am loading the metadata into epma applications using interface tables as ODI dont perit to load metadata into epma applications. Is there any way of using ODI and interface tables together to load the metadata
This process also need to be automated.

Hi,
It is certainly possible and has be done, though there is not anything available that will do it for you, you will have to put in some effort learning the structure of the interface tables, then build interfaces and then a package in ODI to streamline the process.
Cheers
John
http://john-goodwin.blogspot.com/

Communication channel: error during update

Hi,gurus:
We are doring a soap2rfc scenario.
After reactivating relavant object in ID,I found that the status of sender communication channel was "error during update" in RWB.Have you ever dealed with the problem?Any help will be appreciated!

hii
ask your basis guys to see the startup log of XI server...see if there is any error in it.. if there is any error in it, then restart your XI server.......go to SMICM....see if the ICM monitor is running fine.......If ICM is not running fine, then go to Administration->j2ee server->restart->yes and restart your j2ee engine of your XI server......
VisualAdmin-Server-services- Tracelogs. Also can restart your adapter engine and can you exact error you can getin RWB.
Regards

Communication channels error during update

Hello,
All the Communication channels of the XI QA system are showing a status "Error during Update" Checked status of components in Runtime Workbench --> Component Monitoring. Red Alert on Adapter Engine The details of the Communication channel error below is:
com.sap.aii.af.service.administration.api.AdminException: Unable to
retrieve channel runtime status: EventException:
com.sap.engine.frame.cluster.message.PartialResponseException: One or
more of the destinations did not return a response. Response status:
[303228750-RTOE,303228751-RTOE,303981451-OK].
Has anyone encountered this before? Do you have any suggestions on where to look at to investigate on the cause of the problem?
Thanks in advance.
Regina

Hi Regina,
ask your basis guys to see the startup log of XI QA...see if there is any error in it.. if there is any error in it, then restart your XI server.......go to SMICM....see if the ICM monitor is running fine.......If ICM is not running fine, then go to Administration->j2ee server->restart->yes and restart your j2ee engine of your XI server......
Thanks,
Rajeev Gupta

Error during update download

I can't open my itunes
there was an error during update download

See... Unable to install or open > http://support.apple.com/kb/TS5376
Also See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562

Loading dimensions using interface table

Hello,
I am trying to load dimensions into EPMA 11.1.1.3 using interface tables and need some direction. I have an accounts dimension file with the following columns ( Parent, Child, Alias, Description, DataType,Aggregation). I configured a data source using configuration wizard (Interface tables).
I see in the database that some sample tables are created. Now, should I create a separate table with the columns listed above?
Can someone let me know what are the next steps to successfully import accounts dimension?
Thanks

Can someone plz respond?
This is important for me. I have gone thru' the documentation and also the sample tables but don't understand why are there multiple tables for a particular dimension viz. hierarchy, property etc?
Please tell me the right way.
Thanks again!!

Order Entry Interface table error handling through Form after Orderimport

Hi Gurus,
We are on Oracle Apps 11.0.3.
I'm just curious to know that is there any form available to correct error records in SO_HEADERS_INTERFACE, SO_LINES_INTERFACE, SO_LINE_DETAILS_INTERFACE, SO_PRICE_ADJUSTMENTS_INTERFACE, SO_SALES_CREDITS_INTERFACE, SO_SERVICE_DETAILS_INTERFACE, SO_LINE_ATTRIBUTES_INTERFACE, SO_HEADER_ATTRIBUTES_INTERFACE tables after running orderimport.
Most thread says that set REQUEST_ID, ERROR_FLAG and INTERFACE_STATUS columns to NULL in each interface tables. Is there any oracle standard form available to accomplish this in Oracle Apps 11.0.3 or 11i?
Thanks
-Manish

Hi Srinu,
it looks like you got the error message Schedule line &1 &2 is missing in table YVBEP while deleting the sales order.
It seems, that there are no SAP notes regarding this issue. Do you have this issue with all orders or with a single order?
If only a single order causes this issue, maybe something was wrong during an update.
If you get this error for many orders, then custom code (modification, enhancement, user exit in MV45AFZZ, ...) may be the reason for it.
If you have no custom code in module pool SAPMV45A, then contact SAP for this issue.
Regards,
Klaus

How to determine different errors during update database with JDBC 2.0

During updating my database (MS Access 2000) using JDBC 2.0, I entered a value for the primary key field which has existed
in the database. However, when executing the method "udpateRow()" it gives me an error message "Error in row" and the
database was not updated.
When I update an Integer field with a non-integer value (e.g: Characters ), it also gives me the same error message. When I
update a Date field with a non-date value, it still displays the same error message.
How can I determine for each of the cases from the SQLException thrown that the actual error has occurred since I want to
display a different customized message indicating the different errors that occurred during updating??
Currently, part of my code is as follows:
 int currentRow = rs.getRow();
 String values[] = new String[ rsmd.getColumnCount() ];
 // Initialize values[] begins here:
 for( int count = 1; count <= rsmd.getColumnCount(); count++ ) {
 rs.updateObject( count, values[ count - 1 ] );
 try{
 rs.updateRow();
 catch( SQLException e ) {
 System.out.println( e.getMessage() );
 rs.cancelRowUpdates();
 rs.absolute( currentRow );
Can someone please help me solve this problem?? THANKS.. :)

Rather than attempting to figure out which column value causes the update to fail, I would try validating the input data before you attempt to use it in a SQL update. Of course, this would only be useful if you know what data types the inputs are supposed to be in advance of running the update.
William

Rejecting a moving member when using interface tables

Hi,
I'm using the interface tables to update some of my dimensions in EPMA.
My problem is that I want the process to reject members when they are moved, and I can't do that.
Let me explain a little bit more: if I have a product A under a parent X, and that in the next load, A is specified under Y, then I want the process to fail with a message like this: "the member cannot be created because it already exists under another parent".
Right now what it does is that it create the new A under Y and the A under X as shared member. I've tried to change the settings of my profile: I change Merge as Primary for 'replace' but that's not what I want. I tried 'Move' but it's not what I want. I tried to set my IsPrimary column as blank string, doesn't change anything.
Does anyone know how to do that ? Basically, we want to make sure that no product are moved by mistake. Any movement should be performed manually by the admin in the dimension library before interfacing.
Thanks for your help.
Cyril

I used only IM_Dimension & HS_Account_Hierarchy table to load data and that worked.
But now, if I want to give option to user to select the Load_Id while importing, IM_Load_Info needs to be populated.
The problem arises at the time when you try to insert data in IM_Load_Info. Even if we clear data from the table it generates next sequential Load_ID from previously deleted record. For eg. Load_Id in IM_Dimension & hierarchy table is 1, then for the same record in IM_Load_Info can have Load_id as 14.
Now user can select 14 while importing but cannot import any data since all records are having Load_Id as 1.
I am still not able to resolve/handle this problem

Custom report using KM API Error

Hi All,
I have to create a report using KM API. i got the custom report using KM API from sdn and I imported into my NWDS. While i compile it, it is giving me this error.
"The project cannot be build because the classpath for com.sap.netweaver.bc.rf.common.exception.ResourceException is not found."
I have imported all the required jar files.
How can i rectify this error? Could anyone help me out in this issue?
Regards,
Divya

Hi Divya,
> I have imported all the required jar files
First, I don't know what you mean with "imported" - in any case, you should not put the JARs into your project but just reference these.
Also, obviously you have not referenced all the required jar files; ResourceException is part of bc.rf.common_api.jar, which is part of portal application com.sap.netweaver.bc.rf, at least for NW2004s.
Please use the ClassLocator tool (search the WebLogs for this term to get some initial instruction) to avoid such questions in the future. It will make your life much easier.
Hope it helps
Detlev

Customer Coversion Using Interface Table - Error during update

Similar Messages

Maybe you are looking for