Customer Create BAPI

Hi All,
I am trying to create a customer by calling a BAPI. I am unable to find the right one. I wanted to create customer with all levels of data(General, Company and Sales Org including partner functions). I have used below BAPI's.
BAPI_CUSTOMER_CREATEFROMDATA - Only taking general data
BAPI_CUSTOMER_CREATEFROMDATA1 - Importing general information and copying sales org data from reference customer.
SD_CUSTOMER_MAINTAIN_ALL - it is not importing KNVP(partner function data)
Please help me.
ABAPer.
Thanks in advance,

Hi All,
      I found a way to solution.The way is using multiple BAPI's.
BAPI "BAPI_CUSTOMER_CREATEFROMDATA1" is used for creating for customer with reference customer number and then send the information to BAPI "SD_CUSTOMER_MAINTAIN_ALL" for changing the the values.
Still having problem passing parameters.
When i am sending partner information(KNVP) to "SD_CUSTOMER_MAINTAIN_ALL", it is giving ABAP dump ASSERTION_FAILED.
I tried to debug the program but i couldn't find the error.
values i passed to BAPI SD_CUSTOMER_MAINTAIN_ALL
internal table of type FKNVP.
MANDT     sy-mandt
KUNNR     st_knvp-kunnr
VKORG    st_knvp-vkorg
VTWEG    st_knvp-vtweg
SPART     st_knvp-spart
PARVW   st_knvp-parvw
PARZA
KUNN2    st_knvp-sp_kunnr
LIFNR
PERNR
PARNR
KNREF
DEFPA
Appending line by line to the table.
Please help. Is there anything i am missing.
Thanks,
ABAPer.
Edited by: ABAPer on Dec 16, 2007 8:43 PM

Similar Messages

How to create customer with bapi

hi i want to create customer through bapi which facilitates to enter customer code(our own defined not the sequentially next no.)
i have gone through F.M BAPI_CUSTOMER_CREATEFROMDATA1 BUT NOT ABLE TO UNDERSTAND HOW TO INPUT PARAMETER FOR CUSTOMER_CODE.
PLEASE GUIDE ME IF ANY ONE AWARE ABOUT THAT.
THANKS

Moderator message - Welcome to SCN.
But please search the forum before asking a question. This has been discussed many times before. Also read the BAPI documentation - thread locked.
Also, Please read Please read "The Forum Rules of Engagement" before posting! HOT NEWS!! and How to post code in SCN, and some things NOT to do... and [Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers] before posting again.
Rob

How to Create Customer by BAPI or by Function Module

Hi all,
I am new to this forum...
Please can anyone tell me how to Create Customer by BAPI or by Function Module.....?
I have tried many of the function modules posted in the threads.. but it couldn't help me out...

> The only official solution is batchinput and idoc (CREMAS).
Note that when an IDoc exists, it is often possible to call the function module that is just behind it (see WE57 transaction). SAP would not support that direct call, but if you need to contact SAP support about an issue, you can create the IDoc manually and there's no reason that this issue doesn't arise.
The only difference with the IDocs is that you don't have any IDoc stored in the database, and even no log in database (so you won't be able to see anything in WE02, etc.).
Note that it is important to know if this function module does a database commit or not: you can look at the BDFG transaction (I assume there's no BAPI related as it is the initial assumption of my post) to see if IDoc packet processing is allowed or not: if packet processing is allowed, there's no database commit in the function module, otherwise there's one.

Issue with Create BAPI - Please help

I need to do a Create BAPI the structure is as follows:
-Orders
 -Operations_create (Afvgd - BAPI table structure)
On a click of a InsertOperation button, I should be able to insert the line Items to the Operations_create node and then set them finally to the Model node. Then do the order create(Insert BAPI as a whole).
The problem is there is an already existing element (framework created). So if I do the following code in onActionInsertOperation. I am getting an extra duplicate record.
Is there a easy fix to this . I am not sure Supplyfunction will help here. If so, How?
Or Can I tweak the code here?
Thank you ... Any help is appreciated
View Controller:
onActionInsertOperation(){
 IOperations_CreateElement oprEle = wdContext.createOperations_CreateElement();
 oprEle .setGLAccount(wdContext.currentOperations_CreateElement().getGLAccount());
 oprEle .setVendorNo(wdContext.currentOperations_CreateElement().getVendorNo());
 wdContext.nodeOperations_Create().addElement(oprEle);
onActionCreateOrder(){
 wdThis.wdGetVmrsCustController().callBapi_CreateOrder();
 wdThis.wdGetVmrsCustController().callBapi_Commit();
Custom Controller:
callBapi_CreateOrder(){
 for(int i=0;i<wdContext.nodeOperations_Create().size();i++) {
 Afvgd item = new Afvgd();
 item.setGLAccount(wdThis.wdGetContext().nodeOperations_Create().getOperations_CreateElementAt(i).getGLAccount());
 item.setVendor(wdThis.wdGetContext().nodeOperations_Create().getOperations_CreateElementAt(i).getVendorNo());
 inputCreateOrder.addOperations(item) ;
 // Executing the Model
 // Invalidating ...

Hello Vivek,
If the node Operations_create is a Value Node then you may bind the oprEle element to
the nodeOperations_Create() instead of adding it to the Node.
onActionInsertOperation()
 IOperations_CreateElement oprEle =
 wdContext.createOperations_CreateElement();
 oprEle .setGLAccount
 (wdContext.currentOperations_CreateElement().getGLAccount());
 oprEle .setVendorNo
 (wdContext.currentOperations_CreateElement().getVendorNo());
 wdContext.nodeOperations_Create().bind(oprEle);
Also, you may change the cardinality of the Operations_Create node to 0:1 or 0:N (from 1:N).
By doing this, you can prevent automatic generation and addition of an element by the WDF.
Bala

Hi i want to ceate customer through bapi with external no range not implici

hi i want to create customer through bapi which facilitates to enter customer code(our own defined not the sequentially next no.)
i have gone through F.M BAPI_CUSTOMER_CREATEFROMDATA1 BUT NOT ABLE TO UNDERSTAND HOW TO INPUT PARAMETER FOR CUSTOMER_CODE.
PLEASE GUIDE ME IF ANY ONE AWARE ABOUT THAT.
THANKS
Moderator message: please don't use all caps from now on.
Edited by: Thomas Zloch on Aug 4, 2010 6:12 PM

If the iTunes database files are on that drive, launch iTunes with the Shift key(Windows) or Option key(Mac OS X) held down, select Choose Library, and navigate to it. The computer may need to be authorized to play protected content, and if the library contains rented movies, those won't play.
If not, import the content to an iTunes library.
(100371)

Steps to create BAPI

could anyone tell me the exact steps to create a custom BAPI?
(any example will be appreciated).
thanks in advance
nikhil

Hi,
BAPI stands for Business Application Programming Interface.
There are 5 different steps in BAPI.
Create BAPI Structure
Create BAPI Function Module or API Method.
Create BAPI object
Release BAPI Function Module.
Release BAPI object.
Step1. Creating BAPI Structure:
Go to <SE11>.
Select Data Type & Enter a name.
Click on Create.
Note: Always BAPI should be in a development class with request number (Not Local Object).
Select Structure & hit ENTER.
Enter the fields from your database. Make sure that the first field is the Primary Key Field.
Then SAVE & ACTIVATE.
Step 2. Creating BAPI module:
Enter TR.CODE <SE37>.
Before entering any thing, from the present screen that you are in, select the menu
Goto -> Function Groups -> Create Group.
Enter a name (Note: This name Must start with ZBAPI)
Let this screen be as it is and open another window and there, enter TR.CODE <SE80).
Click on the Third ICON that says Inactive Objects.
Select the group that you just created and click on Activate.
Notice that the group you created will disappear from the list of inactive objects.
Go back to ><SE37> screen and enter a name and hit <ENTER>. Then enter the group name that you just created and activated.
NOTE: When you release a function module the respective group will be attached to that particular application. It cannot be used for any other application. NEVER include an already existing group that is attached to another module.
Now click on the first Tab that says ATTRIBUTES and select the radio button that says remote-enabled module since we will be accessing this from any external system.
Then click on the second tab that says IMPORT.
Enter a PARAMETER NAME, TYPE and the structure you created in the first step. Also select the check box Pa. All remotely enabled functional modules MUST be Pa enabled, where Pa means Passed by Value and if you dont select Pa, then that means it will be passed by reference..
Then click on tab that says EXPORT.
Enter the following as is in the first three fields
RETURN TYPE BAPIRETURN (These 3 field values are always same)
Here also select Pa meaning Pass by value.
Note: BAPIRETURN contains structure with message fields.
Then SAVE and ACTIVATE.
Step 3. Creating BAPI object:
Enter Tr.Code <SWO1> (Note. It is letter O and not Zero).
Enter a name and then click on create. Enter details.
NOTE: Make sure that that Object Type and Program name are SAME.
Enter Application M, if you are using standard table Mara. If you are using your own database then select Z at the bottom.
Then hit <ENTER>.
Now we have to add Methods. High light METHODS and then select the following from the menu:
Goto Utilities -> API Methods -> Add Methods.
Enter function Module name and hit <ENTER>.
Select the second FORWARD ARROW button (>)to go to next step.
Check if every thing looks ok and again click on FORWARD ARROW button (>).
Then select YES and click on <SAVE>.
Now on a different screen goto TR.CODE <SE37>. Enter Function Module name and select from the top menu Function Module -> Release -> Release.
Goback to TR.CODE <SWO1>.
Here select the menu combination shown below in the same order.
Edit -> Change Release Status -> Object Type Component -> To Implemented.
Edit -> Change Release Status -> Object Type Component -> To Released.
Edit -> Change Release Status -> Object Type -> To Implemented.
Edit -> Change Release Status -> Object Type -> To Released.
Then click on <SAVE>.
Then click on Generate Button (4th button from left hand side looks like spinning wheel).
Then Click on the button that says PROGRAM to see the source code.
To check if this is present in work flow goto TR.CODE <BAPI>.
Here it shows business object repository.
First click on the middle button and then select ALL and hit ENTER.
Goto tab ALPHABETICAL and look for the object that you created. This shows that the BAPI object has been created successfully.
or
1. Go to transaction SWO1. Enter object interface type. Eg.(ZOBJ)
2.Change the object type release status to implemented and save the object type.
3. Using Z_BAPI (created from SE37) create an API method in the new object type.
4. In the created BOR object ZOBJ, create a new method using the function module template.
5. Input as function module name Z_BAPI.
6.Check the Instance Independent checkbox and click on the next button to continue.
7. On the parameters screen validate whether all the needed parameters are present and click on next.
8. Click Yes on the Extend program dialog to generate the call in the new method.
9. Change the release status of the object type to To released
10. Change also the release status of the method type to To released
11. Double-click on the new method ZBAPI and go to the tab ABAP and change the ABAP type from Function Module to API method.
12. Finally click on Generate button to generate the object interface and save the object type.
Hope it somehow gets you an idea how to implement a BAPI based on a FM created in SE37.
Check the below link..
http://www.sap-img.com/abap/bapi-step-by-step-guidance.htm
http://www.erpgenie.com/abap/bapi/example.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://www.allsaplinks.com/bapi_example.html
Reward if helpful.
Regards,
Harini.S

How to Link SU01 and ContactPerson and Customer through BAPI or FM

Hi,
I want to know how to link a Contact Person to a SAP UserID in same sold to party.
My requirement is like in ISA when a UserId is created which is realated to a Sold-to-party,a contact person is also automatically created in SAP.
e.g. If I am going to create a SAP UserID : Ecomdemo related to Customer 1000 a Contact Person is also crated as 0000002483 in SAP background
I know the BO which is Used BUS1006001.
Kindly help me how to link.. SU01>ContactPerson>Customer through BAPI of FM without doing manually.
Looking forward for the respnse.
Regards
Arbind

Problem solved by own.
Solution : Use Standard SAP FM ISA_USER_CREATE and do some manipulation according to the business needs.
Regards
Arbind

Replace patient create bapi with enterprise service

Hi all,
I've compared the input data of the patient create bapi with the input message of the patient create enterprise service. There are some differences and so I don't know if it's possible to replace the bapi with the enterprise service. As example, the bapi offers input fields for contact persons (first and last name, relationship, address number) which are stored in the table NPAT.
In contrast, the enterprise service offers the input type dependent relationship with fields DependendId and RoleCode.
Which table does the service use to store the contact information?
Does the create patient service fill the same tables as the bapi?
Is it possible to replace the bapi create patient with the enterprise service?
Best regards,
Christian Sonek

Hi Christian,
Enterprise services expose more or less the business partner interface whereas BAPIs expose the patient management interfaces complying to the former data model. As my colleagued described before, next of kin is handled as a separate business partner and due to that fact, services and BAPIs behave in a different way.
That means, in case a customer does not want to upgrade to the new patient management concept with using the central business parter he cannot create next of kin data with the PatientCreate service. In case he wants to upgrade to the new Patient concept and he agrees to store patients and next of kin as business partners, he can replace the API with the service.
Apart from next of kin data, the service for patient create can be used to create patients even with the old patient
Best Regards, Doris Karbach

Custom created field created using Addon is overlapping in BP Master form

Hi All,
I have developed an addon to create some custom field in Business partner master data form. Every thing is working fine but the issue is that when I am maximizing and minimizing the BP form the custom created fields are overlapping with existing SAP B1 field. i have created this fields as the sample specified in SAP B1 SDK. I am giving the sample code below please rectify me if I have made any mistake.
                   lItem = form.Items.Add("CBWBCUSTGR", SAPbouiCOM.BoFormItemTypes.it_COMBO_BOX);
                    lItem.FromPane = form.Items.Item("222").FromPane;
                    lItem.ToPane = form.Items.Item("222").ToPane;
                    lItem.DisplayDesc = true;
                    lItem.Left = form.Items.Item("222").Left;
                    lItem.Top = form.Items.Item("222").Top + 15;
                    lItem.Width = form.Items.Item("222").Width;
                    lComboBox = (SAPbouiCOM.ComboBox)lItem.Specific;
                    lComboBox.DataBind.SetBound(true, "OCRD", "U_WBCUSTGR");
l                  Item = form.Items.Add("STWBCUSTGR", BoFormItemTypes.it_STATIC);
                    lItem.FromPane = form.Items.Item("223").FromPane;
                    lItem.ToPane = form.Items.Item("223").ToPane;
                    lItem.Left = form.Items.Item("223").Left;
                    lItem.Top = form.Items.Item("223").Top + 15;
                    lItem.Width = form.Items.Item("223").Width;
                    lStaticText = (StaticText)lItem.Specific;
                    lStaticText.Caption = "Web Customer Group";
Thanks and Regards
Utpal Maity

Hi All,
I have tried the solution provided by you by modifying the code as written below but when i am minimizing it the fields are getting overlapped.
      lItem = form.Items.Add("CBWBCUSTGR", SAPbouiCOM.BoFormItemTypes.it_COMBO_BOX);
                    lItem.FromPane = form.Items.Item("222").FromPane;
                    lItem.ToPane = form.Items.Item("222").ToPane;
                    lItem.DisplayDesc = true;
                    lItem.Left = form.Items.Item("222").Left;
                    lItem.Top = form.Items.Item("222").Top + 15;
                    lItem.Width = form.Items.Item("222").Width;
               lItem.LinkTo = "STWBCUSTGR";
                    lComboBox = (SAPbouiCOM.ComboBox)lItem.Specific;
                    lComboBox.DataBind.SetBound(true, "OCRD", "U_WBCUSTGR");
l                  Item = form.Items.Add("STWBCUSTGR", BoFormItemTypes.it_STATIC);
                    lItem.FromPane = form.Items.Item("223").FromPane;
                    lItem.ToPane = form.Items.Item("223").ToPane;
                    lItem.Left = form.Items.Item("223").Left;
                    lItem.Top = form.Items.Item("223").Top + 15;
                    lItem.Width = form.Items.Item("223").Width;
               lItem.LinkTo = "CBWBCUSTGR";
                    lStaticText = (StaticText)lItem.Specific;
                    lStaticText.Caption = "Web Customer Group";
Thanks and Regards
Utpal maity

Getting Error while creating multiple Orders using Sales order Create BAPI

Hi,
I am trying to create 2 orders thru the Sales order create BAPI before I commit and save the orders. The Orders are getting created and the BAPI is coming back with success, but it is not setting the system status on the line items of the 1st order. So when I try to cancel the line items on the first order I get the error 'No status object is available for SDI 4924/10' . I would really appreciate if anyone has encountered such error before and could help me out with the reason for this error and the possible solution.
Thanks in advance,
David.

Hi,
Check the following link:
http://www.sap-img.com/bapi.htm
Regards,
Bhaskar

How to change price of item using salesorder create bapi

hi all,
 As per requirement i have to change price of the item while i am creating sales order using sales order create bapi. kindly tell me the process or if possible any sample program.
 thanks in advance
thanks,
pavan
Message was edited by: pavan kumar pisipati

hi max ,
 i created sales order using following code. from here onwords i have to update to change the price of the item. kindly do the needful. i am working 4.7 ides
report zmybapi1 .
data : my_order_header_in like bapisdhd1 occurs 0 with header line,
 my_order_header_ix like bapisdhd1x.
data : my_orderitemsin like bapisditm occurs 0 with header line,
 my_orderitemsix like bapisditmx occurs 0 with header line.
data : my_order_partners like bapiparnr occurs 0 with header line.
data : my_return like bapiret2 occurs 0 with header line.
data : w_vbeln like bapivbeln-vbeln.
data:
 my_orderschedulesin like bapischdl occurs 0 with header line,
 my_orderschedulesinx like bapischdlx occurs 0 with header line.
start-of-selection.
this is to assign values to internal table my_order_header_in
my_order_header_in-doc_type = 'TA'.
my_order_header_in-sales_org = 'JNJ1'.
my_order_header_in-distr_chan = '02'.
my_order_header_in-division = 'J1'.
my_order_header_in-sales_off = 'JNJ1'.
my_order_header_in-purch_no_c = 'testbapipo'.
my_order_header_in-purch_date = sy-datum.
my_order_header_in-req_date_h = sy-datum.
append my_order_header_in.
this is to assign values to internal table my_orderitemsin
my_orderitemsin-material = '000000000000000727'.
my_orderitemsin-plant = 'JNJ1'.
my_orderitemsin-target_qu = 'EA'.
my_orderitemsin-target_qty = '50'.
append my_orderitemsin.
this is to assign values to internal table my_order_partners
my_order_partners-partn_role = 'AG'.
my_order_partners-partn_numb = '0000000011'.
append my_order_partners.
my_order_partners-partn_role = 'WE'.
my_order_partners-partn_numb = '0000000011'.
append my_order_partners.
This is to assign values to internal table my_orderschedulesin
my_orderschedulesin-itm_number = '10'.
my_orderschedulesin-req_qty = '10'.
append my_orderschedulesin.
my_orderschedulesin-itm_number = '20'.
my_orderschedulesin-req_qty = '20'.
append my_orderschedulesin.
my_order_header_ix-updateflag = 'I'.
my_order_header_ix-doc_type = 'X'.
my_order_header_ix-sales_org = 'X'.
my_order_header_ix-distr_chan = 'X'.
my_order_header_ix-division = 'X'.
my_order_header_ix-sales_off = 'X'.
my_order_header_ix-purch_no_c = 'X'.
my_order_header_ix-purch_date = 'X'.
my_order_header_ix-req_date_h = 'X'.
my_orderitemsix-updateflag = 'I'.
my_orderitemsix-material = 'X'.
my_orderitemsix-target_qty = 'X'.
my_orderitemsix-plant = 'X'.
my_orderitemsix-division = 'X'.
my_orderitemsix-target_qu = 'X'.
append my_orderitemsix.
my_orderschedulesinx-updateflag = 'I'.
my_orderschedulesinx-itm_number = 'X'.
my_orderschedulesinx-req_qty = 'x'.
append my_orderschedulesinx.
my_orderschedulesinx-itm_number = 'X'.
my_orderschedulesinx-req_qty = 'x'.
append my_orderschedulesinx.
call function 'BAPI_SALESORDER_CREATEFROMDAT2'
 exporting
SALESDOCUMENTIN =
 order_header_in = my_order_header_in
 order_header_inx = my_order_header_ix
SENDER =
BINARY_RELATIONSHIPTYPE =
INT_NUMBER_ASSIGNMENT =
BEHAVE_WHEN_ERROR =
LOGIC_SWITCH =
TESTRUN =
CONVERT = ' '
 importing
 salesdocument = w_vbeln
 tables
 return = my_return
 order_items_in = my_orderitemsin
 order_items_inx = my_orderitemsix
 order_partners = my_order_partners
 ORDER_SCHEDULES_IN = my_orderschedulesin
 order_schedules_inx = my_orderschedulesinx
ORDER_CONDITIONS_IN =
ORDER_CONDITIONS_INX =
ORDER_CFGS_REF =
if sy-subrc ne 0.
 write: my_return-message, my_return-number, my_return-type.
else.
 call function 'BAPI_TRANSACTION_COMMIT'
 EXPORTING
 WAIT =
 IMPORTING
 RETURN =
 write: my_return-message, my_return-number, my_return-type.
endif.
thanks,
pavan
Message was edited by: pavan kumar pisipati

Hi i want to create BAPI to get approver of the employee

hi i want to create BAPI to get approver of the employee
in this BAPI if there are two approver for that employee than i need both approver personal no.
please help me
thanks in advanced.

Hi
I doubt whether there is a direct Standard BAPI for that.
The below report will get you the employees approver org position. Even if there are two approvers are there, it will display both the approvers position.
*& Report ZGD_TEST_HR_ORG_STR
REPORT ZGD_TEST_HR_ORG_STR.
   DATA: plvar            LIKE hrsobid-plvar.
DATA: otype            LIKE hrsobid-otype.
DATA: sobid            LIKE hrsobid-sobid.
DATA: date             LIKE sy-datum.
DATA: leading_position LIKE hrobject OCCURS 1 WITH HEADER LINE.
DATA: org_agent        LIKE swhactor.
DATA: lv_sw_vapos      TYPE xflag,
        lv_subrc         TYPE sy-subrc.
DATA spfli_wa TYPE spfli.
DATA carrid_buffer TYPE spfli-carrid.
IF plvar IS INITIAL.
    CALL FUNCTION 'RH_GET_ACTIVE_WF_PLVAR'
      IMPORTING
        act_plvar       = plvar
      EXCEPTIONS
        no_active_plvar = 1.
    IF sy-subrc > 0.
      MESSAGE e300(5w) RAISING no_active_plvar.
    ENDIF.
ENDIF.
IF otype IS INITIAL OR sobid IS INITIAL.
      otype = 'US'.
      sobid = sy-uname.
ENDIF.
CALL FUNCTION 'RH_GET_LEADING_POSITION'
    EXPORTING
      plvar              = plvar
      otype              = otype
      sobid              = sobid
      date               = sy-datum
      auth               = ' '
      consider_vac_pos   = space
    TABLES
      leading_pos        = leading_position
    EXCEPTIONS
      no_lead_pos_found = 1
      OTHERS             = 2.
   IF sy-subrc > 0.
    MESSAGE e802(5w) WITH otype sobid
                     RAISING no_lead_pos_found.
ELSE.
    LOOP AT leading_position.
      write : / leading_position-otype,
                 leading_position-objid.
    ENDLOOP.
endif.
Hope it helps you

After creating a object of bapi what is the next step to do to create bapi

after creating a object of bapi what is the next step to do to create bapi completely,
thank you,
Regards,
Jagrut BharatKumar Shukla

Please check the link..
http://www.erpgenie.com/abap/bapi/example.htm

How to pass table values in Create Bapi Wrapper

Hi All,
       Am using create BAPI Wrapper in that how to map the fields inside BAPI Import Structure .
Thanks&Regrads,
Arun

Hi,
Am using standard RFC " QIBP_INSPCHAR_SETRESULT " for creating result recording in SAP QM. And BAPI_INSPOPER_GETDETAIL for getdetail i want to create BAPI wrapper for these 2 i already created BAPI wrapper for get detail . I dont know how to create Create BAPI wrapper.
In QIBP_INSPCHAR_SETRESULT am passing inupt
INSPLOT      LIKE         QALS-PRUEFLOS
INSPOPER     LIKE     QAPO-VORNR
INSPCHAR     LIKE     QAMV-MERKNR
INSPSAMPLE     LIKE     QASV-PROBENR
CHAR_RESULT     LIKE     BAPI2045D2
so i want to know how i can pass    1 . CHAR_RESULT structrue values
                                                           2. INSPLOT,INSPOPER,INSPCHAR again repting inside CHAR_RESULT so how to map these
                                                                in SDOE_WB
Pls explain how to create BAPI Wrapper for this and how to map details.

How will u create BAPI

Hello SAP guys,
I had interview.
I was asked these questions.
1) how do u create BAPI....
2) how u handle upgrade issues...
Let me know the answers.
thanks.
Regards,
Naveen.

Hi,
It is like how you created ZBAPI_ORDER_STATUS_IMPORT..
Go to SE11.
Choose data type, give the structure name and press create..
Choose structure..
And then give the components mentioned in the link..
Please remember to award points for helpful answers..
Thanks,
Naren

Customer Create BAPI

Similar Messages

Maybe you are looking for