Customer Credit limit and Exposure
Dear Experts,
I have an issue regading Customer Credit limit and Exposure in f.31.
My customer have security deposit it is including in customer's credit exposure.
My question is this correct to show customer credit exposure along with spl gl indicator (H) security deposit?
if not how to exclude it from balance.
Plz its Urgent.
Regards,
Javeed
Hi,
Thanks for reply
I have tried in FBKP and remove check box for credit limit
but there is no immediate effect in (f.31) it is showing balance as previuos one
but we post or book new security deposit with same its balance is not effected in (f.31)
but we have already posted lot of entries for sec. deposits for customers.
what i have to do for immediate balance effect for security deposit?
Thanks,
Javeed
Similar Messages
-
RFC used to query customer credit limit and current usage
Hi,
I have been asked to provide information about a customers credit limit and usage. I can see this information is in table KNKK but I cant find any suitable RFC (needs to be remotely enabled) to access this data.
Does anyone know where I can access this data?
Cheers, PaulHave you checked fm
CREDITCONTROL_READ_KNKK
Its normal fm may be you can write wrapper above this and make it as RFC
a® -
Report to show order blocked due to customer credit limit
Hi,
We can set customer credit limit and if the orders exceed the limit, the order will be blocked. I need to know is there any standard SAP report showing the orders blocked (due to credit limit) and unblocked?Hi Paul Hawk,
There are no standard SAP report showing the orders blocked (due to credit limit) and unblocked. But there are reports which needs some customization.
Please see the reports
RVKRED06 credit check for blocked SD documents,
RVEXSLIB List of all blocked partners / documents
Regards,
Lakshmi -
Credit limit and last paid amount by the customer
Hello,
I have one requirement in Account Receivable cube (0FI_AR_4). I need to find CREDIT LIMIT and LAST PAID DATE
So I had done the enhancement for 0FI_AR_4 data source and populated the required values. I had checked in RSA3 for the accuracy of data and everything looks fine.. (in RSA3 every line item for particular customers will be populated with the Credit limit and last paid date. )
Then I created 2 Info Object KEY FIGURES in BW and added it to the 0FI_AR_4 Cube.. .. the info object should display only the latest credit limit maintained and the last payment date for the particular customer. So i have some doubt about the property setting of the INFO OBJECT. Could any one please assist me, what setting is required to fetch only latest credit limit and last payment date.
Thanks
SachinDear Sachin
The credit limit and last payment date is available as part of the standard source FI_AR_9.
Now if you have appended the same in the FI_AR_4 , you can maintain both the fields as keyfigure. For credit limit bring in the currency also in the append
Credit Limit - Keyfigure as Amount with Unit 0CURRENCY
Date of last payment - Keyfigure as Date
Regards
Gajesh -
Billing - Representing the customer's credit limit and premitted products
Dear All,
We intend to implement SAP CRM billing model in our system.
Currently we have 2 fundamental questions we need to solve:
1) How to represent the customer credit limit.
2 ) What is the best way to indicate his permitted products
As we operate in the energy and gas industry. An example for usage scenario might be :
The customer can use euro un-leaded fuel up to daily limit of 50 Liters,
and up to a monthly limit of 1000 Liters.
He can also buy 3 specific motor oils types with his loyalty card.
We need a standard way to represent those restrictions our system,
later the billing model will have to take them into account.
Please Advice.
Thank You,
David TalDear Debashish
As per my understanding, this is because the credit limit check is always applicable at 2 levels only i.e. Sales Order and Delivery.
u r talking about Open Billing Doc and Open Items, but this is also covered within Open Sales Orders and Deliveries, isn't it?
Hope this will help u. -
Both Credit Limit and L/C are not working in Sales Order
Dear All,
We are working on Export scenario where order are created based on L/C and Credit Limit. In my scenario both credit Limit and L/C check is not happening please suggest.
I have created a sales order with value is 1024.00 INR. (My Credit Price is 1024.00 INR)
Customer credit Limit is 50.00 INR. (In FD32)
My L/C value is 1000.00 INR (In VX11N).
I have Implemented Dynamic Check and Assigned L/C to Sales Order. During Order process system blocking the order through Dynamic check. As per the above value System should not block the order. But System blocking the order. When I check Header -> Billing -> Financial Document Log, System showing the value update error. Its comparing entire Netvalue of the Order(1024) with L/C value (1000). How it is possible.
My requirement is system should consider both Credit Limit and L/C value. Please suggest.
Thansk & RegardsNo reply received from any body. But there is limit to post the questions to post another one. I am closing this.
Thanks & Regards -
Customer Credit Limit Not Showing in VKM4
In some cases the customer credit limit is not being displayed in VKM4 for dynamic credit check holds. It seems to happen for certain customers but we can't tell why. The holds are valid, the limit is just not showing and we'd like to know if this is by design or a bug.
We are running ECC 6.0
ThanksDear wradue ,
What difference did you find comparing the FD32 of customers with credit limit and without credit limit in VKM4?
Thanks & Regard,
Hegal K Charles -
Customer Credit Limit on CRM Sales Order
Dear All,
Can the customer credit limit be displayed on CRM Sales order(Customer from ECC, we use simple credit check on SAP ECC)
Regards,
AhmedHi,
The standard credit check in SAP CRM calls up the automatic credit check in SAP R/3. You must define an RFC destination, and specify this destination for the credit check.
· To define RFC destinations in CRM Customizing, choose Customer Relationship Management ® CRM Middleware and Related Components ® Communication Setup ® Define RFC Destinations.
· To specify destinations for the credit check, choose Customer Relationship Management ® CRM Middleware and Related Components ® Communication Setup ® Middleware Parameters ® Define Middleware Parameters. Then choose the activity Credit Check and enter an RFC destination for the parameter CRMCREDCHE.
You can also carry out an initial data transfer for credit data.For transactions that are still open for which you are reactivating update of credit data, you can initially transfer the credit data for a reorganization of data in SAP R/3. To do this, start the initial data transfer for object CMDOC_NOTIFY using transaction R3AS.
When setting up credit limit check, refer to SAP Note 568157, 570155 and 619500.
With Regards
Selvam T -
Customer Credit Limit showing wrong in VKM3
Hi All,
Customer credit limit is showing wrong in VKM3 for all the customer.
i.e : actuall T.Code:F34 is showing 740,000.00 which is correct. But in VKM3 it is 740.00(insted of 740K it is showing 740 only)
The same thing happening for all the customer. How can I correct this. Pls advise.
Thank You ,
Pranitha.Thank You for you replay.
But I found some other client, the credit limit same in FD32 and VKM3.they also ECC6.0.
So what is the solution. -
Does Sap automatically updates customer credit limit from Financial Doc?
Hi Everyone
Does the Sap automatically updates the customer credit limit from the Financial document(Letter of credit) assigned to particular sales order.
I actually want to know that how can i configure the control at delivery order if i assigned the financial document at sales order.Does the system automatically creates or updates the credit limit of that customer to control over delivery order.
If yes then how and i only want to handle credit management in the case financial document(letter of credit).
Regards;Vijay KumarHi,
Hi,
yes it does.
Note some important points
Inautomatic credit control field "No Check field", you can enter the number of a requirement with which you can control when credit checks are not carried out. You can deactivate some or all checks. This allows fine tuning on an individual basis for defining credit-relevant transactions and when credit checks do not need to be carried out.
A check should be made to see whether the payment guarantee form has changed (letter of credit, payment card). If the payment guarantee form has not changed and if the old net value does not exceed the new net value, then no credit check is carried out.
refer these book also
McGraw.Hill.Implementing.SAP.ERP.Sales.and.Distribution
TSSD40_3
GTS100
also check wiki also
Thanks
Chidambaram -
Making Customer Credit Limit (FD32) a sensitive field
I am wondering if it is possible to mark customer credit limit (field KNKK-KLIMK) which you enter by using T-Code FD32 a sensitive field for dual control? If so, I request for detailed steps as I have been trying to do so but could not succeed. Please guide me.
Thanks in advance.
MoazzamMoazzam,
you can have sensitive field only for Vendor and Customers Master Data (FK09 and FD09). If you want define FD32 fields for another user approbation you must create a User Exit or install a workflow.
regards -
Customer credit limit updation problem
Hi,
i created some customers, right now they don't have any credit limits, now by using fd32 Tcode i am trying to change the customer credit limit (creating new credit limit), but it is going to short-dump due to some time-out problem, can any one tell me for already existing users how to create credit limt.
Thanks,
Sreeram.Hi
You need to enable the "audit trail" for this particular field
Go to System Admin: Security:AuditTrail:Install
Enable Audit Installation for AR
Enabling the audit trail wil help you know the changes history.
As far as my knowledge is concerned, there is no approval hierarchy on customer credit limit application, all you can do is to assign the responsibility to the authorized person.
Regards
Nouman Shaikh -
Customer Credit Limit from Oracle Financials to SAP
Friends,
SAP has to receive the Customer credit limit data from Oracle Financials. Can any one help me what idoc / bapi should i use for this inbound process.
If the question is not clear , please let me know.
Regards
RajHi there,
In WE20, check if there is Oracle system defined as Logical system in your company. If yes, then click on the logical system. It will display the details.Check in the inbound parameters what message types are assigned for that system.
If Logical system is not defined for Oracle, then we need to define 1.
I guess message type is CRESTA. Not sure.
Regards,
Sivanand -
Hi all
i habe the following problems,
I customiz the credit limit and it work well, but the Message to the credit manager can not be sent.
when i create a sales order, i can see the message in header output well, when i save the Order i become a message that the message was sent, but the message will not be sent.when i display the order i see the following message:the output is block by user xxx (the user who create the order).had anyone a idea?It has been observed that you are habitually closing the threads WITHOUT updating the forum properly as to how the issue is resolved which is UNFAIR on your part.
Please develop the habit of updating the forum properly and try to respect the forum members time; else at one stage, you will not get proper feedback.
thanks
G. Lakshmipathi -
Can ALV Grid show credit limit and excess credit limit but do not sum them?
Can ALV Grid show 100,000.00(in ???1) and 84,260.94(???2). Not sum them up.
Credit limit, Inv. Curr, Inv. Amount, Amt in LC, Excess Credit Limit
100,000.00 USD 1,594.20 5,260.86 84,260.94
100,000.00 USD 263.84 870.67 84,260.94
100,000.00 USD 1,935.60 6,270.38 84,260.94
100,000.00 USD 806.70 2,613.30 84,260.94
100,000.00 USD 214.98 696.43 84,260.94
100,000.00 USD 8.50 27.42 84,260.94
???1 USD 4,823.82 15,739.06 ???2
USD 4,823.82 15,739.06Hi Sandeep,
Please refer to the bold figure as they are the credit limit and excess credit limit for 1 vendor.
It is not right if sum the credit limit and excess credit limit.
Is it ALV cant handle this type of requirement?
Is there any way to solve this?
Credit limit, Inv. Curr, Inv. Amount, Amt in LC, Excess Credit Limit
100,000.00 USD 1,594.20 5,260.86 84,260.94
100,000.00 USD 263.84 870.67 84,260.94
100,000.00 USD 1,935.60 6,270.38 84,260.94
100,000.00 USD 806.70 2,613.30 84,260.94
100,000.00 USD 214.98 696.43 84,260.94
100,000.00 USD 8.50 27.42 84,260.94
100,000.00 USD 4,823.82 15,739.06 84,260.94 <--subtotal line
USD 4,823.82 15,739.06 <-- total line
Edited by: Check Chuan Kuan on Feb 24, 2011 10:03 AM
Maybe you are looking for
-
Supporting Multiple domains in IM&P with and Expressway deployment?
Hello everyone. This is long winded but the context is needed to explain what I'm looking for. Any help is appreciated. My customer has piloted IM&P for 1 year now and is looking to take it to the next level. They purchased Expressway Core & Edge and
-
Insering quoted string in a table
i have a string liek the following in a variable hello'786' Please tell me how to insert this into a table
-
I am using Excel 2013, I have installed fuzzy lookup, it got installed without any hassle but it doesn't show up in Excel. Load behavior of fuzzy add-in in COM Add-ins shows "A runtime error occurred during the loading of the COM Add-ins." If I try t
-
I have a Dual 2.5 G5 with an Apple Cinema HD 23" LCD connected. I have just bought a Sony 32" HD LCD TV with a HDMI input and understand that all I need is a male DVI to male HDMI cable to then be able to use my Mac's DVD player to view movies on my
-
Mass delete WHERE in RANGE TABLE??
hi is it possible to do mass delete from a custom table DELETE ZDATABi WHERE FIELD1 in RANGE_FIELD1 i don't want to select in ZDATABi INTO AN_ITAB where field in RANGE_FIELD1 then use that same AN_ITAB again <removed> Edited by: Thomas Zloch