Customer does not have RFC959 compliant FTP server - what is the work aroun

Hello to All,
We have a situation where some of our customers do not support RFC959 standard. So we are running into the issue documented in OSS note 821267 question 36. We are hitting our customers server every 1 second. We are currently manually activating and deactivating this FTP adapter everyday. We are on an HP Unix server. We tried to run the before operating system command with SLEEP 1800 but it did not seem to work.
Is there any secrets to using the Operating system command option on the FTP adapter?
We are hoping to only hit our customers server every hour or 30 minutes.
Any other suggestions on work arounds to this issue?
Thanks,
Deidre Logan

HI,
You may try with Java Proxy , in the Java proxy you can use Java APIs for sending/recieving files.
It may help you as a workaround instead of File Adapter.
Regards,
Moorthy

Similar Messages

I got photoshop elements 13 and premiere elements 13 for christmas for my Mac Book Pro but it does not have a disk drive can I use the ss

I got photoshop elements 13 and premiere elements 13 for christmas for my Mac Book Pro but it does not have a disk drive can I use the ss# to download this online? How do I do this?

Download from
Download Photoshop Elements products | 13, 12, 11, 10
Download Premiere Elements products | 13, 12, 11, 10
Install then enter your serial number when prompted.

My daughter does not have an iPhone. I just got the IPhone4. When she receives messages from me they must be downloaded for her to read them. How do Imsend plain SMS messages to a non iPhone recipient?

My daughter does not have an iPhone. I just got the IPhone4S. When she receives messages from me they must be downloaded for her to read them. How do I send her plain SMS messages to a non iPhone recipient?

Well, it could have to do with her phone, however does she have any difficulty in receiving SMS from others? You may want to check how you have iMessage set up. Go to Settings>Messages>Receive at>Make sure your telephone number is listed there, then go to Caller ID, and make sure your phone number is the one with the checkmark by it. You may be sending messages with your email address as the header and if that is so, it may be requiring her to download it as data. See if that helps.

HT201317 My 4s and my ipad3 are both connected to wifi and icloud is turned on. The photos on the 4s do not upload to the ipad3. I have turned icloud off and on on both devices. It also does not upload to my PC. What is the problem?

My 4s and my ipad3 are both connected to wifi and icloud is turned on. The photos on the 4s do not upload to the ipad3. I have turned icloud off and on on both devices. It also does not upload to my PC. What is the problem?

Welcome to the Apple Community.
Photostream only syncs photos over Wi-Fi, make sure you are connected to Wi-Fi to begin with.
Photostream only syncs when the camera app is closed, ensure it is closed.
Photostream only syncs when the battery is above 20%, try recharging the device
Try disabling photo stream on your device (settings > iCloud), restarting your device and then re-enabling photo stream.
If this doesn't help you may need to reset photo stream. You can do this at icloud.com by clicking on your name in the top right corner and then the advanced settings in the pop-up dialogue box that appears.
Note: disabling photostream and re-enabling it will result in any photos that are currently in the photostream album on your device, that are older than 30 days old, not being added back.

Hallo! I installed ios 6.0 to my iphone 4s, but the panoramic shooting mode does not appear. Tell me please what is the proplem?

Hallo! I installed ios 6.0 to my iphone 4s, but the panoramic shooting mode does not appear. Tell me please what is the proplem?

Camera App>Options:

My Mac has FaceTime 2.0 and it is terrible, I tried to download a new copy but the apple store does not have 2.0 Also I chat was the way I communicated before I upgraded. What happened?

I upgraded to Lion X and have been having problems with FaceTime my version is 2.0 and the Apple store does not have this version, what happened to the changes, I used to use IChat and it was great, this is no longer available. Any hints for video conferencing or for what is going on.

You can video conference with the iChat component of Messages. Not sure if that's possible with Facetime. I have been using Facetime for video chat without any problems. Quality is no different than with iChat.

I cloud wont let me sing in with my aplle ID beceause it does not have a @hotmail to it what do i do ???

Icloud won't let me sign in with my apple ID beceause it does not have @hotmail.com ! What do i do i just want my music back im tempted just to get the old version of ios and the old itunes it was so mush betor then this !

If you have one of the old Apple IDs which are just a username and not an email address you cannot use this to create an iCloud account.
You will need to go to http://appleid.apple.com and create a new ID - for this you will need a functioning non-Apple email address (GMail or Yahoo would be fine).
Then you can sign in with the new ID in System Preferences (or Settings)>iCloud and create an iCloud account and an @icloud.com email address.
There is no problem about using this ID for iCloud and the old one for iTunes. The two are not related.

I just purchased Lightroom, and it arrived today, but on a CD. My new Apple Mac Book does not have a CD player. What do I do?

How do I install Lightroom on my new Apple MacBood that does not have a CD player? I just purchased Lightroom, but it arrived on a CD. HELP

Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

HT4623 My iPhone 3G does not have update function in it What do I Do?

My iPhone 3G does not have an update function in it. I want to update my software, What do I do?

An iPhone 3G can only be updated to iOS 4.2.1...that's the end of the line for that model, and an iPhone 3G can only be updated to iOS 4.2.1 using iTunes. Software update, directly on the phone, is not available for the iPhone 3G.

FTP Adapter File Polling does not raise error when FTP server is down

Hi All,
Thanks in advance.
I am polling for new files in a FTP Server. However, if the server is down there is no way for me to catch the fault to notify someone. I am using fault-policies but that never gets triggered when polling an unavailable FTP Server.
One option is to have a completely separate scheduled process (SOA or not) that tries to connect to the servers but I am trying not to go that route just to keep things manageable and within the realm of the process.
I am sure that I am not the only one polling for new files in a FTP Server, so I thought to pick your brain to tackle this scenario.
Thanks for taking the time to read this.

I was contacted by our DBA team for an exception received while writing a file to a FTP location.
Then i looked at the exception message and asked them to check the whether they are able to contact the ftp server using command prompt then they said the user password got expired.
They reset the password and its working now.
Am i missing something here :(
Exception:
WSIF JCA Execute of operation 'Put' failed due to: Error sending file to FTP Server.
Unable to send file to server.
; nested exception is:
ORABPEL-11429
Error sending file to FTP Server.
Unable to send file to server.
Please ensure 1. Specified remote output Dir has write permission 2. Output filename has not exceeded the max chararters allowed by the OS and 3. Remote File System has enough space.
Thanks,
Vijay
Edited by: veejai24 on 25-Jul-2012 07:10

My new computer does not have iWeb and I can't open the files from the old computer. What can I do???

I'm really desperate. I used to publish to a blog directly from iWeb, then I discontinued it. When I made the switch to iCloud, I wasn't worried because I knew my files would always be there. However, once I got a new computer, I transferred all the old files to an external hard drive and I thought everything would work just fine. Well, it didn't Neither can I open iWeb nor can I find my files.
Can anyone help me please?

New Macs have not shipped with iWeb for over 2 years and Apple has not sold or supported iWeb for at least 2 years now - Apple stopped selling it and dropped support for it when MobileMe was ditched in favour of iCloud which does not offer hosting.
If you want iWeb, then you will need to have a look at your old installation CD's for your old Mac and see if iWeb is on these and you can then install it from there or if you don't have these CD's any longer, then you'll have no option but to purchase a copy of either iLife 09 or iLife 11 from Amazon - these boxed sets both contain iWeb 09, which is the latest version of iWeb.
Other than this and as you have not done your blog for sometime, perhaps you should consider re-creating it from scratch with a software that is actively supported and updated - that is NOT iWeb any longer.
You could try using WordPress, either .com or .org - .org is good if you already have hosting and you can install WordPress directly onto your server. If you want something free, then you could use WordPress.com which is then published on the WordPress servers.
You could also take a look at EverWeb from Rage Software, which is very new and is very like iWeb with all the extras, such as drop down menus etc. Take a look at http://www.everwebapp.com.
As for your files, it sounds that when you say files, these might be the published files for your site, if you went into iWeb and published them to a local folder? This is not a backup and even if you could find these files, then iWeb will not be able to open them because it has no import facility, so cannot open an already published site - html and css files.
What you need is your domain.sites files which can be found under your User Library/Application Support/iWeb/domain.sites.
I would cut your losses and if you don't have iWeb, then don't bother paying for software that is now outdated and unsupported - move onto to something new and re-create everything in either WordPress or EverWeb.

I received a text from another iPhone user who does not have an iPad, why did I receive the text on my iPad rather than my iPhone?

I have both the iPhone and New iPad and I was under the impression when sending a text it went from iPhone to iPhone or iPad to iPad. Also, if I send a text from my iPad to someone who only has the iPhone, it comes in on their iPhone. However, I received a text from an individual who only has an iPhone and it came to my iPad and never showed up on my phone...Which means had I not been at home I would not have known I had a text on my iPad???? How does it determine which device it will appear on?

You are probably right - I don't have my iPad with me and was confusing myself. But on the iPad it is receive at email addresses only.
Sending to the phone number will mean ONLY your iPhone gets the message. If you want it to go to ALL devices, then you should have them send to the email address associated with the AppleID you used to set up iMessage originally. Also set that email address up as your caller id on the iPhone so as you send out messages, people will reply to that and both your devices should get them.
Although Apple's notes indicate you should be able to do it - http://support.apple.com/kb/TS2755
what if you just type in a 10-digit phone number on the iPad instead of an email?
(I originally did all this with iOS 5.0, and I know then the number did not work on an iPad, but maybe with iOS 5 updates, it does now?)

"The device does not have necessary services"...what does this mean?

I have been told this error happens because Verizon wants you to use data instead of wifi to browse your phone but as this is happening with a bluetooth connection that does not seem a likely answer unless Verizon is also not willing to let you use bluetooth to browse your phone. All I want to do is browse the files on my S4 Mini via bluetooth. That should not be asking too much... What is the real cause of this error and is there a fix or workaround? Thanks!

hey man, i was getting the same message, with a MacPro 8-core and a MacbookPro, i did this...
1. both has the BLUETOOTH Sharing ON and "Show Bluetooth Status in Bar" ON
(my Require paring is off, don't know if it changes something)
2.in bluetooth preferences, select the device (here MacbookPro) click below in the gear for options than "Configure this device”.
3. when the "Bluetooth Device Set Up" show up, do not click on CONTINUE, instead click on the bluetooth button in menu bar, your device (here my mackbookpro) now has the option for SEND and BROWSE...
Hope that work for you too...
Sorry my poor english..

TS1398 Frustrated lost WIFI on IPAD 1 the day the new IOS came out, which 1 does not have. Tried everything listed, what next?

Have done everything possible, spent hours reading every tip possible. What can I do, is Apple aware that lots of folks who did not update to IOS6 lost their WIFI on the 18th?

Has nothing to do with the iOS 6 release on 19 Sept. and which can't be installed on the iPad 1.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Admin account does not have access to change a password in the CMC

We are on bo xi r2, and we are set up with Windows AD authentication for our users to log in with, but when I add an enterprise login for a user and I go to set the password, I get "You do not have permission to perform the request action. Please contact your system administrator." I am logged in as administrator. Has anyone come accross this before?
Thanks,
Jessa

Hi,
There are lots of Knowledge Base Articles with this description, for example:
1298962 - Error:"You do not have permission to perform the requested action. Please contact your system administrator for details"
1473840 - Error :"You do not have permission to perform the requested action" when trying to change password at first login
1630679 - Unable to reset admin password for Enterprise
1239840 - Administrator profile cannot change a user password in Central Management Console (CMC).
These can be researched from service.sap.com/notes
Regards,
H

Customer does not have RFC959 compliant FTP server - what is the work aroun

Similar Messages

Maybe you are looking for