Customer Dunning printout - missing columns

Hi,
I have tried using F150 to run customer dunning. The sapscript attached F150_BE_DUNN_01 for printing of dunning form. However, 3 columns are missing from form - Doc no, currency and amount. I'm using the standard form given.
Pl advised.

It seems to be a standard program error. The system we are using is ECC SAP ECC 6.0. Hope to hear from you soon. Thank.

Similar Messages

  • Customer dunning printout terminated

    Hi Gurus
    We are getting the error massge for few of the customers while doing the dunning Form ZF150_DUNN_01 does not exist, it is happening to only few customers but for few customers with same Dunning procedure dunning letters are getting generated with out any issues.
    Please advise
    Rajesh Roy

    Hi,
    Your are getting this Issue, when your running the Dunning for all customer at a time or for single customer
    Thanks
    Goutam

  • Customer Dunning

    Hi,
    I m trying to configure Customer Dunning and following the following process:
    Define Dunning Area OB61
    Define Dunning Process FBMP
    Assigning Dunning Process in customer master.
    I follow the steps mentioned in another poet on SCN but i am unable to execute dunning through F150.
    I am missing something. the one thing that i saw during the configuration was that when i assign the form in dunning text the system gives a message that form "XYZ" does not exist in my client "350"
    Could any one guide me on this and share the step by step process?
    and also i am unable to understand how F150 is executed. i don't see any print preview plus where will this dunning process be updated? is there going to be any financial impact in customer account "FBL5N" or is it just going to print an form to be sended to customer as a notice of payment due?
    Please share the complete process of Dunning.
    Regards,

    Hello Faizan,
    The message "Form XYZ do not exist" is coming because the form is not defined. Please check in T. code SE71 whether the form you customized in FBMP exists. If not assign the correct form which exists or create the new form.
    Once the F150 Dunning prinout is done, you can check the print form preview using Sample Printout button (in F150).
    The table where the data gets updated are MHND (customers) and MHNK (Vendors)
    Dunning forms are the reminder notices to customers to pay the Money on schedule.
    It does not have and financial Impact.
    You can find lot of material on Internet /SCN on Duning configuration, process. please check the same.
    BR
    Amitash

  • Customer Dunning is not printing

    Hi Gurus,
    In F150 while Generating  a dunning letter for customer, iam getting this message in job log.
    and unable to print letter.
       Parameters were maintained
       Dun.selection scheduled for 22.05.09   at 16:09:05
       Dun.selection is complete
       Dun.printout scheduled for 22.05.09   at 16:09:21
       Dun.printout is complete
       Samp.printout scheduled for 22.05.09   at 16:39:47
       Samp.printout is complete.
    BUT UNABLE TO PRINT LETTER.
    Job started
    Step 001 started (program SAPF150D2, variant &0000000000038, user ID SAPUSER)
    > -
    Start print phase -
    0 dunning notices were read
    0 dunning notices have been printed.
    End dunning printout 22.05.09 / VSK12

    Hello,
    Check the last dunned date in the customer master.
    If you have dunned the last dunned very recently, till you have to wait to complete the number of days you have mentioned in the dunning procedure for the next dun.
    If you are test run, you can just manually change the last dunning date, dunning level on the customer master FD02
    Regards,
    Ravi

  • F150 Dunning printout - Termination Error

    Dear Experts
    At T.Code F150 Dunning proposal run, if we execute "Dunning Proposal" and if we want to delete it then system permits us to delete the Dunning Proposal.
    However, in some cases,  system shows everything correct at Dunning Proposal but when we execute "Dunning Print out" system give error message like "Dunning Printout as terminated".  In this case, we figure out the problem and re-run dunning printout to solve the problem.
    However, I would like to know,  Is there any possibility that we can delete "Dunning run" completely when dunning printout is ended up at "Termination" error?
    Thanks in advance for the help.
    best reg
    S. Habib Pasha.

    Dear friend
    Agreed.  However, live situation is User has performed Dunning run for all customer by mistake, where is not suppose to.  and this dunning run is ended up with "Duning printout terminated" error. 
    If we fix the termination reason and complete the dunning then all outputs will go to customers automatically by e-mails from SAP.  and we want to stop this.
    hope I am clear and the requirment we are looking at...
    best reg
    S. Habib Pasha.

  • Missing Columns from List Content Type

    Hi,
    I'm having some strange problems with one of my site collections, I have site content types with a few columns in it and I'm using them in 3 different libraries.
    However recently something happened and it seems the list content types in one of the libraries have stopped using some of the columns set out in the site content type (according to library settings). The columns still show as part of the list (and the metadata
    is still in there), when I've tried adding them back to the list content types, I do not see them in the list columns group, only in their original column group. If I try to add them to the list from their original group I get the errors similar to the following:
    11.14.2014 13:16:52.85 w3wp.exe (0x1B84)
    0x0770 SharePoint Foundation
    General 8e2s
    Medium Unknown SPRequest error occurred. More information: 0x8007054f
    fd09cc9c-cf7b-1059-3bcb-0e44d3bf3743
    11.14.2014 13:16:52.85 w3wp.exe (0x1B84)
    0x0770 SharePoint Foundation
    General aix9j
    High SPRequest.AddField: UserPrincipalName=, AppPrincipalName= ,bstrUrl=http://servername/sitecollection ,bstrListName={7F184ACA-48C3-4728-AF42-A12CB55941B4} ,bstrSchemaXml=<Field Type="Lookup" DisplayName="DocumentOwner"
    Required="FALSE" EnforceUniqueValues="FALSE" List="{57d71ec0-a996-4977-abf7-4cd4e0cc105c}" WebId="53a31862-077a-4031-8aad-7f2a43e33a46" ShowField="Title" UnlimitedLengthInDocumentLibrary="FALSE" Group="_QMS"
    ID="{ca4bc17d-bb96-4aee-bb96-e645c939a013}" ,grfAdd=18
    fd09cc9c-cf7b-1059-3bcb-0e44d3bf3743
    11.14.2014 13:16:52.85 w3wp.exe (0x1B84)
    0x0770 SharePoint Foundation
    General ai1wu
    Medium System.Runtime.InteropServices.COMException: An internal error occurred. (Exception from HRESULT: 0x8007054F), StackTrace:    at Microsoft.SharePoint.SPFieldCollection.AddFieldAsXmlInternal(String
    schemaXml, Boolean addToDefaultView, SPAddFieldOptions op, Boolean isMigration, Boolean fResetCTCol)     at Microsoft.SharePoint.ApplicationPages.AddFieldToContentTypePage.AddFieldToList(SPField fldSrc)     at Microsoft.SharePoint.ApplicationPages.AddFieldToContentTypePage.UpdateList()
        at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean
    includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()     at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
        at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)     at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)     at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext
    context, AsyncCallback cb)     at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer,
    IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)     at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr
    pHandler, RequestNotificationStatus& notificationStatus)     at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr
    rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
    fd09cc9c-cf7b-1059-3bcb-0e44d3bf3743
    11.14.2014 13:16:52.85 w3wp.exe (0x1B84)
    0x0770 SharePoint Foundation
    General 8nca
    Medium Application error when access /_layouts/15/fldpick.aspx, Error=An internal error occurred. (Exception from HRESULT: 0x8007054F)   at Microsoft.SharePoint.Library.SPRequestInternalClass.AddField(String
    bstrUrl, String bstrListName, String bstrSchemaXml, Int32 grfAdd)     at Microsoft.SharePoint.Library.SPRequest.AddField(String bstrUrl, String bstrListName, String bstrSchemaXml, Int32 grfAdd)
    fd09cc9c-cf7b-1059-3bcb-0e44d3bf3743
    11.14.2014 13:16:52.85 w3wp.exe (0x1B84)
    0x0770 SharePoint Foundation
    Runtime tkau
    Unexpected System.Runtime.InteropServices.COMException: An internal error occurred. (Exception from HRESULT: 0x8007054F)    at Microsoft.SharePoint.Library.SPRequestInternalClass.AddField(String bstrUrl,
    String bstrListName, String bstrSchemaXml, Int32 grfAdd)     at Microsoft.SharePoint.Library.SPRequest.AddField(String bstrUrl, String bstrListName, String bstrSchemaXml, Int32 grfAdd)
    fd09cc9c-cf7b-1059-3bcb-0e44d3bf3743
    11.14.2014 13:16:52.85 w3wp.exe (0x1B84)
    0x0770 SharePoint Foundation
    General ajlz0
    High Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.SharePoint.SPException: An internal error
    occurred. (Exception from HRESULT: 0x8007054F) ---> System.Runtime.InteropServices.COMException: An internal error occurred. (Exception from HRESULT: 0x8007054F)     at Microsoft.SharePoint.Library.SPRequestInternalClass.AddField(String bstrUrl,
    String bstrListName, String bstrSchemaXml, Int32 grfAdd)     at Microsoft.SharePoint.Library.SPRequest.AddField(String bstrUrl, String bstrListName, String bstrSchemaXml, Int32 grfAdd)     --- End of inner exception stack trace ---  
      at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)     at Microsoft.SharePoint.Library.SPRequest.AddField(String bstrUrl, String bstrListName, String bstrSchemaXml, Int32 grfAdd)     at Microsoft.SharePoint.SPFieldCollection.AddFieldAsXmlInternal(String
    schemaXml, Boolean addToDefaultView, SPAddFieldOptions op, Boolean isMigration, Boolean fResetCTCol)     at Microsoft.SharePoint.ApplicationPages.AddFieldToContentTypePage.AddFieldToList(SPField fldSrc)     at Microsoft.SharePoint.ApplicationPages.AddFieldToContentTypePage.UpdateList()
        at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.HandleError(Exception
    e)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
        at System.Web.UI.Page.ProcessRequest()     at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()    
    at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
    fd09cc9c-cf7b-1059-3bcb-0e44d3bf3743
    I've tried to make changes to the parent site content type, however those changes to not push down to the library in question. The missing columns have varied types (single line of text, lookup, managed metadata and so forth). All of these content types &
    site columns were created through the user interface of SharePoint.
    Can anyone help me with any ideas what has happened and/or how to fix this problem?

    Hi Hans,
    As I understand, you have custom content type in 3 libraries, while the issue occurs to the columns in this content type.
    I wonder if the issue occurs to other two libraries as well?
    From your description, "I've tried to make changes to the parent site content type, however those changes to not push down to the library in question", do you mean that changes in content type are not reflected to the list which is added to this
    content type. If that is the case, I'd suggest you recreate content type.
    If the site content type works well in other two libraries, please create a new library and add this content type. If it works well, then move the list content to this new list.
    Regards,
    Rebecca Tu
    TechNet Community Support

  • Dunning run missing few customers - urgent

    Hi All,
    Dunning run missing few customers,
    Dunning block is not there
    as per Terms of payment due date is met
    dunning procedure is assigned in customer master data
    customers have open items to meet dunning run
    run was successful
    can anybody help me on this
    where I need to check
    Regards
    Prasad

    Hi,
    First check in FBL5N, whether items are overdue and overdue days are beyond the dunniong days.
    Then check customer master by FD03/XD03 - dunning data in correspondance.
        - Check dunning cleark is same as given your selection
        - Mainly last dunning date (last dunned). Ity may be possible that last dunning has done recently.
    Regards,
    Vinod

  • Wrong bank details are showing in dunning printout

    Hi,
    wrong bank details are shown in dunning report,
    Here system showing one bank account for normal gl's and
    showing another bank account for special gl's in the same printout and in the same company code
    From where these bank details are updated in the dunning printout(i.e which table or which field),
    If i want to change these bank account details in the dunning printout,
    how can proceed or how can i change,
    please suggest me, help is appreciated
    Points are guaranteed if your reply is helpful.
    Thanks & Regards,
    Shan

    Hi,
    Actually in dunning printout below mensioned sentence was displayed
    'Please pay amount to ***** bank account'
    In this i found that there are two bank accounts one is for Normal items and other is for Spl. GL items.
    I have to replace account Numbers, so suggest me how can i do.,
    Thanks in advance.
    Regards,
    Shan

  • Customs product master missing error

    Hi,
    while creating sales order and saving it, iam getting the error, "subsequent processing not allowed(Customs product master missing 12123). contact customes excise tax dept""........and i cannot save the sales order.
    12123  in the error message above is material number.which i give in sales order.......................the message no is FTPI901
    what is the issue. ??? at first i thought some coding is done in user exit for sales order.. but i cannot find any such code in exit.
    regards
    sachin

    Hi,
    for transfering material master data from feeder system (R/3 / ERP) to GTS follow these instructions:
    - go to SAP GTS PlugIn Menue in ERP
      Transaction Code:  /SAPSLL/SAPLMENUE_LEGAL_R3
    - go to Tab "Initial Transfer of Mast. Data"
      click on "Transfer Material Masters"
    - choose  your particular material and execute (F8)
    hope that helps!
    regards,
    Ralf

  • Custom button goes missing after click the button in Customer Master

    Hi All,
    I have one query regarding Custom tab button in Custome MAster.I have implemented BAdIs using CUSTOMER_ADD_DATA_CS and CUSTOMER_ADD_DATA  to match my requirment.
    Query:
    While click the custom button(which i have created in Customer Master) , the subscreen is displayed  but the Custom Button is missing.Where in Standard Buttons like 'GENERAL DATA' and 'COMPANY CODE DATA' Std buttons in Customer master Etc. buttons going to disable mode while click these button in custome mastar.
    Is there any OSS notes to implement OR we required to set up some PF status to match above requirment.
    Please let me know.
    Thanks,
    Sridhar

    If I follow you, no. That's the way it works. The buttons are composited with the background so become part of it. I'd rethink the design.
    Basically, you don't want the highlights to determine the color of unselected buttons. You'll always have fringes and jaggies. Having a non-transparent color set for the unselected state kind of does what you want, but won't look the best.

  • Customer line item missing in accounting doc after billing

    Hi experts...
    We are facing an issue after generating  billing document, accounting document is created automatically but in that accounting document the customer itself is missing in the entry where as other line items like revenues, taxes are visible. where could have been the mistake. Kindly help with the possibilities of missing configuration.
    Ideal entry should have been like
    Customer dr
    Revenue   cr
    Output tax cr.
    Cheers,
    Sravanthi

    Hi:
             Check for missing authorization in SU53 immediately after you face this issue..I think you are missing an authorization object F_BKPF_BED activity 03 or F_BKPF_BES Activity 03/.. Please ask BASIS guy he will resolve your issue.
    Regards

  • Custom Tag is missing required attribute property

    Hello,
    Here is my struts config file source;
    <global-forwards>
              <forward name="mainpage" path="/index.jsp">
              </forward>
              <forward name="CustomerDetailsForward" path="/GoToCustomerPage.do">
              </forward>
         </global-forwards>
         <!-- Action Mappings -->
         <action-mappings>
              <action path="/SubmitCustomerForm" type="action.SubmitCustomerForm" name="CustomerForm" scope="request" validate="true" input="/CustomerDetails.jsp">
                   <forward name="success" path="/Success.jsp">
                   </forward>
                   <forward name="failure" path="/Failure.jsp">
                   </forward>
              </action>
              <action path="/GoToCustomerPage" type="org.apache.struts.actions.ForwardAction" parameter="/CustomerDetails.jsp">
              </action>
         </action-mappings>
    And my index.jsp source;
    <html:html>
    <head>
    <html:base/>
    </head>
    <body>
    <html:button></html:button>
    <html:link forward="CustomerDetailsForward">Go To Customer Form </html:link>
    </body>
    </html:html>
    And here is the error;
    Error Message:JSPG0227E: Exception caught while translating /index.jsp: /index.jsp(13,1) --> JSPG0006E: Custom Tag is missing required attribute property
    Root Cause:com.ibm.ws.jsp.translator.JspTranslationException: JSPG0227E: Exception caught while translating /index.jsp: /index.jsp(13,1) --> JSPG0006E: Custom Tag is missing required attribute property     at com.ibm.ws.jsp.translator.visitor.validator.ValidateVisitor.visitCustomTagStart(ValidateVisitor.java:304)     at com.ibm.ws.jsp.translator.visitor.JspVisitor.processJspElement(JspVisitor.java:267)     at com.ibm.ws.jsp.translator.visitor.JspVisitor.processChildren(JspVisitor.java:309)     at com.ibm.ws.jsp.translator.visitor.JspVisitor.processJspElement(JspVisitor.java:268)     at com.ibm.ws.jsp.translator.visitor.JspVisitor.processChildren(JspVisitor.java:309)     at com.ibm.ws.jsp.translator.visitor.JspVisitor.processJspElement(JspVisitor.java:139)     at com.ibm.ws.jsp.translator.visitor.JspVisitor.visit(JspVisitor.java:121)     at com.ibm.ws.jsp.translator.JspTranslator.processVisitors(JspTranslator.java:121)     at com.ibm.ws.jsp.translator.utils.JspTranslatorUtil.translateJsp(JspTranslatorUtil.java:181)     at com.ibm.ws.jsp.translator.utils.JspTranslatorUtil.translateJspAndCompile(JspTranslatorUtil.java:83)     at com.ibm.ws.jsp.webcontainerext.AbstractJSPExtensionServletWrapper.translateJsp(AbstractJSPExtensionServletWrapper.java:349)     at com.ibm.ws.jsp.webcontainerext.AbstractJSPExtensionServletWrapper._checkForTranslation(AbstractJSPExtensionServletWrapper.java:317)     at com.ibm.ws.jsp.webcontainerext.AbstractJSPExtensionServletWrapper.checkForTranslation(AbstractJSPExtensionServletWrapper.java:226)     at com.ibm.ws.jsp.webcontainerext.AbstractJSPExtensionServletWrapper.handleRequest(AbstractJSPExtensionServletWrapper.java:131)     at com.ibm.ws.jsp.webcontainerext.AbstractJSPExtensionProcessor.handleRequest(AbstractJSPExtensionProcessor.java:270)     at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java:308)     at com.ibm.ws.webcontainer.extension.DefaultExtensionProcessor.handleRequest(DefaultExtensionProcessor.java:472)     at com.ibm.ws.wswebcontainer.extension.DefaultExtensionProcessor.handleRequest(DefaultExtensionProcessor.java:111)     at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:3129)     at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:238)     at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:811)     at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1433)     at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:93)     at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:465)     at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:394)     at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:274)     at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminators(NewConnectionInitialReadCallback.java:214)     at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitialReadCallback.java:113)     at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:152)     at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:213)     at com.ibm.io.async.AbstractAsyncFuture.fireCompletionActions(AbstractAsyncFuture.java:195)     at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)     at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:194)     at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:741)     at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:863)     at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1510)

    volkov wrote:
    Error Message:JSPG0227E: Exception caught while translating /index.jsp: /index.jsp(13,1) --> JSPG0006E: Custom Tag is missing required attribute propertyWhich is line 13 then? And check the syntax for that tag.

  • Flat File Import, Ignore Missing Columns?

    The text files I'm importing always contain a fixed set of columns for example total number of full set of columns is 60, or a subset of those columns (some csv contain 40 columns, some contain 30 or 20 or any other number.) .  I would like to import
    these csv based on the column header inside the each csv, if it is a subset of full column set then the missing columns can be ignored with null value.
    At the moment in SQL 2012, if I import a subset of columns in the csv file, the data doesn't import...I assume because the actual file doesn't include every column defined in the flat file source object? 
    Is it possible to accomplish this without dynamically selecting the columns,  or using script component?
    Thanks for help.
    Sea Cloud

    If the columns coming are dynamic, then you might have to first get it into staging table with a single column reading entire row contents onto that single column and parse out the column information using string parsing logic as below
    http://visakhm.blogspot.in/2010/02/parsing-delimited-string.html
    This will help you to understand what columns are present based on which you can do the insertion to your table.
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • Sending Customer ,Dunning and Payment Advices through Mail

    hi to all
    help me inthis issue
    for Customer,Dunning and Payment Advices i need to send it through mail to customers and vendors.
    for example when we run F.27 Transaction the customer statemnts should be mailed to customer directly
    thanks in advance
    kiran reddy
    Message was edited by:
            Kiran Reddy
    Message was edited by:
            Kiran Reddy
    Message was edited by:
            Kiran Reddy
    Message was edited by:
            Kiran Reddy
    Message was edited by:
            Kiran Reddy
    Message was edited by:
            Kiran Reddy

    Yeah ,
    This will be maintianing a output type for a specific order in the Nace Configuarations for output type for the application say in ur case Payment advices.
    Here u need to maintain a program name (driver program) and a form routine as Entry in the processing routines .
    You  need to write the logic in this driver program which is a Zprogram.
    Now when ever the application is run the output type is enabled and so the driver program will execute the logic pertaining to the entries created by ur transaction.
    can achieve this  with  SO_OBJECT_SEND for the customer id  .
    hope this gives u an idea ..
    i dont know about payment advices so can t elaborate more than this but the process will be same.
    regards,
    vijay

  • Missing columns in spool

    Hi,
    I have a program that displays a very wide report using ALV list. When executed in foreground, the report comes out ok; but when it is executed in background, the report somehow gets cut (missing columns in the spool display and when printed). Why is that so? Are there any solutions for this?
    Will appreciate immediate feedback. Thanks!
    Winnie

    Hi,
    The standard line size that u can print is 255 characters in ALV report.
    You can check notes 186603 to display report with more than 255 charecters.
    you will get the detailed notes. In the Attachments you have the Z program code.
    After creation of the new format, run the job with the new format ie. attach the new format to your printer, and run the job. Now take the spool number and put it as a parameters to the Z program.
    for more details check this thread
    Re: Spool List output display > 255 char when the rpt is run in Background
    Hope it work fine.
    Rewards points if useful
    Regards
    Sonika

Maybe you are looking for