Customer exit code to populate fiscal period for prior three months
Dear frns,
I need an ABAP customer exit code to populate prior three month's fiscal period.
Please update on this...thanks
Cheers! Shana
Hi
Here is the code that will satisfies ur condition.
CASE I_VNAM.
IF I_STEP = 2.
WHEN 'ZVAR1'.
DATA DATE1 TYPE D.
DATA PERIOD1 TYPE N.
DATE1 = SY-DATUM.
CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'.
exporting
l_date = date1
l_periv = 'v3'
importing
E_BUPER = PERIOD2
E_GJAHR = YEAR2.
DATA PER3 TYPE N.
PER3 = PERIOD2 + 1.
CONCATENATE YEAR2 PERIOD2 INTO FPERLOW.
DATA LDATE TYPE D.
LDATE = SY-DATUM + 365.
CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'.
exporting
l_date = LDATE
l_periv = 'v3'
importing
E_BUPER = PERIOD2
E_GJAHR = YEAR2.
CONCATENATE YEAR2 PERIOD2 INTO FPERHIGH.
DATA WA1 LIKE LINE OF E_T_RANGE.
WA1-LOW = FPERLOW.
WA1-HIGH = FPERHIGH.
WA1-SIGN = 'I'.
WA1-OPT = 'BT'.
APPEND WA1 TO E_T_RANGE.
ENDIF.
Hope u gotit,
Regard,
RaviChandra
Similar Messages
-
Customer exit code to populate three month's fiscal period
Dear frns,
I need an ABAP customer exit code to populate three month's fiscal period.
Please update on this...thanks
Cheers! ShanaDear,
Thank u for all replies.
My requirement is simple.
Rows:
Fiscal Year
Columns
GR Value
Filters
Material Number
Input Paramters:
Material No.
Fiscal Year
Using customer exit if we populate current fiscal year in the selection screen output be like this....
FISCAL YEAR GR Value(in crores)
2009 4000
2008 3000
2007 2000
2006 1000
The cube name Custom Cube ZBBP_C03.
But I dont have time char 0FISCYEAR in my Cube.In my cube avaiable chars are Calender Year,Calender Year/Month,Calender Year/Quarter,Fiscal Period
Please let me know if you need any information.
Waiting for replies,
Thanks & Regards,
Praveen.K -
Customer exit code for fiscalyear period based on system date
Hi Experts,
Please provide customer exit code for fiscalyear period derive based sy-datum. Fiscal year period derivie current to previous 12 periods and current to fast 12 periods.
Thanks,
SubbarajuHi Subbaraju,
Please use below customer exit code for your solution. Please define declarations as per requirement.
When 'ZFPERIOD'.
IF I_STEP = 2.
ztoday = sy-datum.
zfast = sy-datum + 365.
CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
EXPORTING
i_date = ztoday
i_periv = 'K4'
IMPORTING
E_BUPER = PERIOD2
E_GJAHR = YEAR2.
CONCATENATE YEAR2 PERIOD2 INTO FISCPERLOW.
CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
EXPORTING
i_date = zfast
i_periv = 'K4'
IMPORTING
E_BUPER = PERIOD2
E_GJAHR = YEAR2.
CONCATENATE YEAR2 PERIOD2 INTO FISCPERHI.
L_S_RANGE-LOW = FISCPERLOW.
L_S_RANGE-HIGH = FISCPERHI.
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'BT'.
APPEND L_S_RANGE TO E_T_RANGE.
ENDIF.
Similar code user for your previous periods also.
Thanks,
Chandra -
Help needed in customer exit code to exclude a value
Hi Gurus,
I need to use a Customer Exit Variable to read the values for a characteristic. Based on one indicator I have to include or exclude a value. I am trying to use the code as below. But, it is saying "AError for variable in customer enhancement ...".
Code
the variable is a multiple single values customer exit variable
zl_s_range-low = z_placc.
CLEAR zl_s_range-high.
if z_pl_ind = '1'.
zl_s_range-sign = 'I'.
elseif z_pl_ind = '2'.
zl_s_range-sign = 'E'.
endif.
zl_s_range-opt = 'EQ'.
APPEND zl_s_range TO e_t_range.
Please help me to solve the issue,
Thanks in advance,
Regards,
aarthiHi Uday,
Thanks for your response.
Below is the complete code.
WHEN 'ZV_CSS11'.
IF I_STEP = 1. "Before Pop-up
select * into table i_tp_tab_pl from /BIC/QZ_TP_PLAC
where /BIC/Z_TP_PLAC = '11' and
DATEFROM <= sy-datum and DATETO >= sy-datum.
if sy-subrc = 0.
LOOP AT i_tp_tab_pl.
clear zl_s_range.
z_placc = i_tp_tab_pl-/BIC/Z_PLACC.
z_pl_ind = i_tp_tab_pl-/BIC/Z_PGLA_IND.
zl_s_range-low = z_placc.
if z_pl_ind = '1'.
zl_s_range-sign = 'I'.
else.
zl_s_range-sign = 'E'.
endif.
zl_s_range-opt = 'EQ'.
APPEND zl_s_range TO e_t_range.
clear z_placc.
clear z_pl_ind.
ENDLOOP.
endif.
endif.
Thanks in advance,
Regards,
aarthi -
How to write customer exit code to get current user as default in variable
Hi guys,
I design a query which has a variable called var_employee , I also set some default values for this variable in query designer. But I would like to set the current user account who logon on (who execute the query) in the dropdownlist as default user when the variable selection screen appear. of course after that he can choose other avaiable value.
I look up some related threads, all says that this need some customer exit code, and they mention to use CMOD to create the customer exit , but I don't know the detail process, as I am pretty new on this.
The attribute of the var_employee variable is : employee(defined info object by myself) characterstic value, customer exit.
Can somebody show me the process to create the customer exit, and the apap code in detail if possbile. then I can try.
Thanks a lot in advance.
Best Regards,
BenHi,
Please have a look at:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f1a7e790-0201-0010-0a8d-f08a4662562d
Krzys -
Hi All,
i have an issue while executing customer exit code for a query.
Its giving the following error
WValue "07.2010" is too long for variable Z_RAPMONTHS
EValue "07.201" for user-exit variable Z_RAPMONTHS is invalid
EVariables contain invalid values.
I>> Row: 82 Inc: LRRMSU13 Prog: SAPLRRMS
ASystem error in program CL_RSR_OLAP_VAR and form INIT-02- (see long text)
Requiremnt is: variable value should corresponds to last six months including current month (six months in total), e.g. if we execute the report today (December month) the desired value should be 07.2010 - 12.2010.
code which i have written is:
when 'abc'.
DATA: curr_month(2) TYPE n,
calc_month(2) TYPE n,
curr_year(4) TYPE n,
prev_year(4) TYPE n.
CLEAR:curr_month,curr_year,prev_year.
if i_step eq 1.
curr_month = sy-datum+4(2).
curr_year = sy-datum+0(4).
if curr_month = '01'.
calc_month = curr_month + 7.
prev_year = curr_year - 1.
CONCATENATE calc_month '.' prev_year INTO l_s_range-low.
else.
calc_month = curr_month - 5.
CONCATENATE calc_month '.' curr_year INTO l_s_range-low.
else.
l_s_range-low = lv_zp0003_year.
ENDIF.
CONCATENATE curr_month '.' curr_year INTO l_s_range-high.
IF l_s_range-low = l_s_range-high.
l_s_range-opt = 'EQ'.
ELSEIF l_s_range-high IS INITIAL.
l_s_range-opt = 'EQ'.
ELSEIF l_s_range-low LT l_s_range-high.
l_s_range-opt = 'BT'.
ENDIF.
l_s_range-sign = 'I'.
APPEND l_s_range TO e_t_range.
Can any one please let me where i am doing the mistake.
Thanks & Regards.
AKGremove the '.' from the below concatenate statements.
CONCATENATE calc_month '.' curr_year INTO l_s_range-low.
CONCATENATE curr_month '.' curr_year INTO l_s_range-high.
use the code as
CONCATENATE calc_month curr_year INTO l_s_range-low.
CONCATENATE curr_month curr_year INTO l_s_range-high. -
Customer exit code to calculate Average YTD.
Hi Experts,
I want to create new column ( AVGYTD TRGT) in Bex report for folling data .( Which is FF data).
I have created one formula variable(zfmvavgytd) of type customer exit. and strucked at coding part.
so that, anybody provide customer exit code for required column(avgytd trgt). and details are as follows.
0CALMONTH ENO ENAME PERDAY_ TRGT
04.2011 1 ABC 100
04.2011 2 BCD 200
05.2011 1 ABC 200
05.2011 2 BCD 200
06.2011 1 ABC 300
06.2011 2 BCD 200
07.2011 1 ABC 200
07.2011 2 BCD 200
till 03.2012
Now I want to display the column for ( AVG YTD_TRGT) based on "0calmonth " & " ENo " as below
AVG YTD_TRGT
100
200
150
200
200
200
200
200
calculation behind this is...
for 04 .2011 --empno(1) ---100/1
for 04 .2011 --empno(2) ---200/1
for 05 .2011 --empno(1) ---200+100/2
for 05 .2011 --empno(1) ---200+200/2
for 06 .2011 --empno(1) ---300200100/3
for 06 .2011 --empno(1) ---200200200/3
for 07 .2011 --empno(1) ---200300200+100/4
for 07 .2011 --empno(1) ---200200200+200/4First you need to calcualte the YTD and then Average YTD.
Year to Date (YTD) u2013 From the 1st to entered u201CKey Dateu201D for the current year.
Average Year to Date - YTD divided by the u201CNo of Daysu201D in year till u201CKey Dateu201D for current year.
Check the below code for getting Previous YTD....next create a Selection restrict the KF with YTD varaible
Below is sample code for reference.
to calculate "Previous year to date" (User input Calday u2013 key date)
WHEN 'ZDAYPYR'.
IF I_STEP = 2. "after the popup
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'ZPDATE'.
CLEAR L_S_RANGE.
L_S_RANGE-LOW = LOC_VAR_RANGE-LOW.
L_S_RANGE-LOW(4) = L_S_RANGE-LOW(4) - 1. "low value previos year
v_loc_date = L_S_RANGE-LOW. "take input value in another variable
L_S_RANGE-LOW+4(4) = '0101'.
L_S_RANGE-HIGH = v_loc_date. "high value = input, taken into another variable
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'BT'.
APPEND L_S_RANGE TO E_T_RANGE.
EXIT.
ENDLOOP.
ENDIF. -
How to make BEX Customer Exit Variable inactive through Customer Exit Code
Hi,
I had created two variables VAR1 and VAR2 as Customer Exit variables
If VAR1 is entered then it should automatically make the VAR2 as NO Entry Variable.
vice versa also required.
can u help me with any code in CMOD so that we can make it inactive through Customer Exit Code.
Thanks in Advance.
Sunil.What i want is not commenting the code
I want to make the BEX Variable as inactive by using the Customer Exit Code
EX : If value in VAR1 is entered then VAR2 should become automatically inactive.
If value in VAR2 is entered then VAR1 should become automatically inactive.
how can this be done
Thanks in advance.
Sunil -
Hello Experts,
We are using Wise Script Wrappers to run Microsoft Updates (KB). Wise Script has Exit Installation Command through which we can control the Custom Exit codes return by the setup (Wrapper) .
Case 1
In our case when we use shutdown.exe at the end after installation of KB's to reboot the machine the exit code reflected in sccm is 0 though we set Exit code 100 in Wrapper.
Case 2
When we dont reboot at the end of installation that is we dont use Shutdown.exe the Exit code return is 100.
We cannot use Config manager restarts computer due to our business needs
So Any help will be appreciated on how we can control the custom exit codes
Thanks,
ApppackSo the real question is why are you using non-standard exit codes?If you do non-standard things, you will get non-standard results.
As Jérémy pointed out 3010 means "The requested operation is successful. Changes will not be effective until the system is rebooted." There are actually other standard error codes that indicate a pending reboot also but 3010 is the most common. A complete
list of standard error codes is available at http://msdn.microsoft.com/en-us/library/cc231199.aspx.
Jason | http://blog.configmgrftw.com -
I just restored my iphone4 in iTunes ( after not syncing it for about three months) and it wiped all my texts and contacts and I think restored it to three months ago. It seems it erased all texts and recent contacts since three months. Any way of undoing this? thanks in advance, Greg
Only if you have a more recent backup with which to restore from - if you've only got the one from 3 months ago then you will be limited to what was on that.
-
i have just use my laptop for only three months and my hard disk cable have break and i need a replacement
Talk to AppleCare about getting a replacement.
Allan -
My kids misplaced her iPad, we can't find it for almost three months already. Check using 'find my iPhone' it show the iPad still OFF. Is there any way to find it last location before it was OFF ?
Simply stated that is design. If you want to suggest a change, there is a feedback section elsewhere on this site.
Barry -
No user input for the field on which i need to write customer exit code.
Hello everyone,
Scenario:
There are differrent lease type and there Start date and expiry date.
each lease has to return somoe returns on some basis.
selection screen has four options but none of them is date.
My understanding:
I need to get only those leases in my report whose expiry date is greater than system date/current calendar day.
I am not selecting any date field in selection screen, so i need to get value of expiry date from cube, and than compare it to current date.
So i need to write a customer exit in which i need to read date and restrict data on this expiry date.
Requirment:
Need a code for SAP exit variable which will meet the following requirment
There are the following 4 variables in the query.
1) material
2) product hierarchy
3) City
4) lease type
I need a customer Exit variable (CMOD) that will
filter the records on the basis of condition-"lease expiry date is greater than current system" and display all the records whose expiry date is greate than Sy Date (Current Date) and also if expiry date is blank.
kindly give me information on how i can write this code asap; and let me know if need more information.
ThanksI am Getting the same error for both the codes that i have written...
Do i Need to write sth else in the code...
Code:
WHEN 'ZVLIVELEASES'.
IF I_STEP = 2.
L_DATE = SY-DATUM.
SELECT * FROM "DSO_ACTIVE_TABLE"
INTO TABLE ITAB_LL where "EXPIRY_DATE" > L_DATE.
LOOP AT ITAB_LL INTO WA_LL.
CLEAR l_s_range.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
l_s_range-low = WA_LL-"EXPIRY_DATE".
APPEND L_S_RANGE TO E_T_RANGE.
ENDLOOP.
ENDIF.
Error: Error for variable in customer enhancement ZLIVELEASES -
Customer exit - code for variable
Hi Friends,
I have created a variable "CUST_EXIT_YEST" and defined the processing type as customer exit. Now would like to add code in CMOD.
Requirement: The variable should allow take yesterday's date. Please help me with the code.
Already there are some codes defined for other customer exit variables in CMOD. Can I add my code below that. If so please explain.
Regards,
SurjitIf i'm not wrong you want to show previous day in the variable.
At the bottom of the existing code before EndCase, u can write the below code
Data: loc_var_range LIKE rrrangeexit, (must be there this kind of declaration in ur existing code)
WHEN 'CUST_EXIT_YEST'.
IF I_STEP = '1'.
Read Table I_T_VAR_RANGE into LOC_VAR_RANGE WITH KEY VNAM = 'CUST_EXIT_YEST'.
myrange-SIGN = 'I'.
myrange-OPT = 'EQ'.
myrange-LOW = sy-datum - 1.
APPEND myrange TO e_t_range.
ENDIF. -
Need for customer exit code to go to previous date
In the ODS there is a date which is a user entry on my report. I need to write a customer exit which goes to previous date.
In other words let's say user entered 07/07/07 at the user entry, and there is no activity for the entered date. The previous activity date in ODS data is 07/05/07. The report should run based on the previous date. ( Date is the key by the way )
I will appreciate any help with points,
Regards,
MikeI just wrote this quickly and I limited to 10 loops because something is wrong if it is further back than that and I think another solution should be done. This is also assuming the volume of data is not too large. If so you may want to take the year off the date and add that to the select statement.
Can the previous date be any date? So lets say the user entered 07/07/07 and the last activity was 01/01/07? Is date the only key?
If so you can do something like this.
date_ 1 like <date_ field in ODS>
date_ 2 like <date_ field in ODS>
counter(2) type n
DATA: BEGIN OF data_all OCCURS 0,
Date_ 3 like date_ 1
END OF data_all
date_ 1 = user enter
counter = 10
Select <date_ field> from <ods backend table> into data_all
Sort ascending
While counter > 0
Read data all where data_all-date_3 = date_1
If sy-subrc <> 0
Date_ 1 = date_ 1 1
Counter = counter - 1
Continue.
Else
date_2 = date_1
Exit.
Endif
End loop
Return date_2
Maybe you are looking for
-
Hi All, When I checked table MHND, the dunning interest is calculated in such a way that it doesn't consider the previous dunned date. Meaning : Dunning ran on 12-01-09 interest calculated is 500.00 ( 2 docuemnst considerded from bsid as seen from ta
-
Alright, so I've tried what feels like everything. First off, I am troubleshooting for WINDOWS 7. After I reboot, the computer functions relatively fine. Great latency, no choppyness, no matter what I do. About two to three days later, it gets incred
-
Satellite A200 external display is blurred
We have bought 5x satellite A200. After connecting it to any external display we get nothing but blurred picture. It's impossible to work on it. Our other notebooks P200 series work well on presented displays. We really do not know what to do with it
-
After insert employer information in assignment window (GOSI Details saudi arabia) the window closed suddenly. any hints
-
hi i have recently upgraded SCSM 2012 from 2010. Just few queries to be clarified... 1. Users are able to access the create request page only when i add the domain\users group in Groups -> Incident catelog -> global operators group. Is this right? 2.