Customer Exit for sales order Incompletion Procedure

Hi,
We have a requirement where we require to disable the incompletion log check on net price when a certain free goods condition exists in the sales order pricing.  We are unable to do this using standard configuration.
Is there a user-exit we can use on the incompletion log?  I have been unable to find an exit or a BADI.
Regards,
James.

Hi,
  Try this.
  Create a new incompletion procedure without the net price field..
  In the save document prepare user exit check for the conditions and switch the incompletion procedure to the new one..
Thanks,
Naren

Similar Messages

  • What are the User Exits for Sales Order creation process?

    Hi,
    what are the User Exits for Sales Order creation process? how can I find them?
    thanks in advance,
    will reward,
    Mindaugas

    Please check this info:
    User Exits In Sales Document Processing
    This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
    Involved program components
    System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
    MV45ATZZ
    For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
    MV45AOZZ
    For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
    MV45AIZZ
    For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
    MV45AFZZ and MV45EFZ1
    For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
    User exits in the program MV45AFZZ
    The user exits which you can use for modifications in sales document processing are listed below.
    USEREXIT_DELETE_DOCUMENT
    This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
    For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
    The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
    USEREXIT_FIELD_MODIFICATION
    This user exit can be used to modify the attributes of the screen fields.
    To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
    The usage of the field groups (modification group 1-4) is as follows:
    Modification group 1: Automatic modification with transaction MFAW
    Modification group 2: It contains 'LOO' for step loop fields
    Modification group 3: For modifications which depend on check tables or on other fixed information
    Modification group 4: is not used
    The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
    This FORM routine is called up by the module FELDAUSWAHL.
    See the Screen Painter manual for further information on structuring the interface.
    USEREXIT_MOVE_FIELD_TO_VBAK
    Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
    The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBAP
    Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
    The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBEP
    Use this user exit to assign values to new fields at the level of the sales document schedule lines.
    The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBKD
    Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
    The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
    USEREXIT_NUMBER_RANGE
    Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
    The user exit is called up in the FORM routine BELEG_SICHERN.
    USEREXIT_PRICING_PREPARE_TKOMK
    Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
    USEREXIT_PRICING_PREPARE_TKOMP
    Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
    USEREXIT_READ_DOCUMENT
    You use this user exit if further additional tables are to be read when importing TA01 or TA02.
    The user exit is called up at the end of the FORM routine BELEG_LESEN.
    USEREXIT_SAVE_DOCUMENT
    Use this user exit to fill user-specific statistics update tables.
    The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
    Note
    If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
    USEREXIT_SAVE_DOCUMENT_PREPARE
    Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
    The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
    User exits in the program MV45AFZA
    USEREXIT_MOVE_FIELD_TO_KOMKD
    Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
    USEREXIT_MOVE_FIELD_TO_KOMPD
    Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
    USEREXIT_MOVE_FIELD_TO_KOMKG
    Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
    USEREXIT_MOVE_FIELD_TO_KOMPG
    Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
    USEREXIT_REFRESH_DOCUMENT
    With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
    For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
    The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
    The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
    User-Exits in program MV45AFZB
    USEREXIT_CHECK_XVBAP_FOR_DELET
    In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
    USEREXIT_CHECK_XVBEP_FOR_DELET
    In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
    USEREXIT_CHECK_VBAK
    This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
    USEREXIT_CHECK_VBAP
    This user exit can be used to carry out additional checks (e.g. for completion) at item level.
    USEREXIT_CHECK_VBKD
    The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
    USEREXIT_CHECK_VBEP
    This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
    USEREXIT_CHECK_VBSN
    You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
    USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
    USEREXIT_FILL_VBAP_FROM_HVBAP
    You can use this user exit to fill additional fields in the sub-item with data from the main item.
    USEREXIT_MOVE_FIELD_TO_TVCOM_H
    You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
    USEREXIT_MOVE_FIELD_TO_TVCOM_I
    You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
    User-Exits for product allocation:
    The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
    USEREXIT_MOVE_FIELD_TO_COBL
    Option to include new fields in structure COBL.
    USEREXIT_COBL_RECEIVE_VBAK
    Option to assign values from the document header to the new fields.
    USEREXIT_COBL_RECEIVE_VBAP
    Option to supply values from the item to the new fields.
    USEREXIT_COBL_SEND_ITEM
    A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
    USEREXIT_COBL_SEND_HEADER
    A changed field can be copied from the structure to the header (see source text MV45AFZB)
    USEREXIT_SOURCE_DETERMINATION
    You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
    USEREXIT_MOVE_FIELD_TO_ME_REQ
    With this user exit you can include additional fields for the following fields:
    EBAN (purchase requisition)
    EBKN (purchase requisition-account assignment)
    USEREXIT_GET_FIELD_FROM_SDCOM
    Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
    USEREXIT_MOVE_WORKAREA_TO_SDWA
    You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
    User-Exits for first data transfer:
    The following user exits can only be used for the first data transfer.
    Note
    Only use the user exits if the names/fields do NOT have the same name.
    USEREXIT_MOVE_FIELD_TO_VBAKKOM
    Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
    USEREXIT_MOVE_FIELD_TO_VBAPKOM
    Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
    USEREXIT_MOVE_FIELD_TO_VBEPKOM
    Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
    USEREXIT_MOVE_FIELD_TO_VBSN
    You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
    USEREXIT_MOVE_FIELD_TO_KOMKH
    You can use this user exit to include new fields for batch determination (document header).
    USEREXIT_MOVE_FIELD_TO_KOMPH
    You can use this user exit to include new fields for batch determination (document item).
    USEREXIT_CUST_MATERIAL_READ
    You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
    USEREXIT_NEW_PRICING_VBAP
    Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
    USEREXIT_NEW_PRICING_VBKD
    Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
    User-Exits in Program MV45AFZD
    USEREXIT_CONFIG_DATE_EXPLOSION
    The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
    User exits in the program FV45EFZ1
    USEREXIT_CHANGE_SALES_ORDER
    In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
    If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
    User-Exits in Program RV45PFZA
    USEREXIT_SET_STATUS_VBUK
    In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
    The following workareas are available for this user exit:
    VBUK (header status)
    FXVBUP (item status)
    FXVBUV (Incompletion)
    USEREXIT_SET_STATUS_VBUP
    In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
    The following workareas are available for this user exit:
    FXVBAP (Item data)
    FXVBAPF (Dynamic part of order item flow)
    FXVBUV (Incompletion)
    USEREXIT_STATUS_VBUK_INVOICE
    You can use this user exit to influence billing status at header level.
    User exits in the screens
    Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
    Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
    For field transports, you do not have to make changes or adjustments.
    Example
    A new field, VBAK-ZZKUN, should be included in table VBAK.
    If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
    User Exits in Program MV45AFZ4
    USEREXIT_MOVE_FIELD_TO_KOMK
    You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
    USEREXIT_MOVE_FIELD_TO_KOMP
    You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
    User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
    EXIT_SAPFV45P_001
    You can use this user exit to decide whether intercompany billing data is used in the profitability segment for cross-company code sales, or whether the data comes from external billing (external customer, sales data from the selling company code.
    Regards
    Eswar

  • User exit for  Sales order

    hi,
       i need to eliminate leading zeros for PO number which comes in SO created trough ALE.i found the enhancement for the FM idoc_input_orders.in that enahancement we have 12 FM's.my Leading zeros are comming for field belnr which comes in e1edk01 segment of idoc orders05.now i had coded my part of coding in FM exit_saplved.._oo1 and i had activated that.but it is not working for me.than i tought of going to other FM exit_sapl..._009.in which i'm not able go into the include either.plz help me out.thank you.

    Hi, Krishna!
    With IDOC_INPUT_ORDERS during IDoc interpretation PO number is assigned to XVBAK-BSTKD field which is later used for sales order creation with reference to PO.
    So all you need is to use some customer exit with changing parameters containing XVBAK after IDoc interpretation is completed. For example you can use EXIT_SAPLVEDA_009 which is called at the end of IDoc check after interpretation.
    Regards,
    Maxim.

  • User exits for sales order

    Dear all SAP experts,
    How to find out the user exits for sales document type? Especially the user exits which are called when we save the sales order.
    With best regards,
    Allabaqsh G. Patil

    Hi,
    Also there is user exit to refresh data
    USEREXIT_REFRESH_DOCUMENT
           It is always necessary to refresh user-specific data before   *
          the next document will be processed.                          *
          This can be done in this userexit.                            *
          This userexit can be used to refresh user-specific data       *
          when the processing of a sales document is finished           *
          - after the document is saved                                 *
          - when you leave the document processing with F3 or F15       *
          It may be necessary to refresh user-specific data before      *
          the next document will be processed.                          *

  • Customer block for sales orders

    Dear SD Gurus,
    The client wants for some orders to create for the customer with sales order block
    For example customer 100 has sales order block but for sales order type XY00, sales order will be able to be created but for sales order type XY01, it should be able to be created.
    How is it possible?
    Best regards
    John Black

    Hi,
    For this you can create one sales order block under SPRO-IMG-Sales& Distribution-Sales-sales Documents-Define & assign reasons for blocking.
    Assign this new block to those document types for which you want to block. Remaining document types can be processeed.
    For this in XD05, you have to assign this order block created to the customer master.
    100% it will work . Be happy buddy!!!
    Rajesh G

  • Custom field for sales order - Urgent.

    Hi all,
    I am novice at SD, want to append a custom field to header level tables - VBAK, LIKP, VBRK. for sales order.
    - Will append structure work for this requirement ?
    - Will this field automatically apears in VA01, VA02, VA03 screen ?
    Thanks in Advance.
    Regards,
    Mohan.

    Hi,
    Implementation Guide.
    This is the place where we do the configuaration settings for sap.
    This is the place where the core users or super users do the configuration changes if they want after the project is implemented.
    Mohan
    Award points if it helps

  • User exit for sales order - schedule lines

    Hi all,
    I have requirement in SO, that user has not to change the scheduled lines date and quantity in va01, va02.
    I could find FV45EFZ1 as the include program for this and the value of CH_SUBRC should set to > 0.
    But i put break point here and the control wont come to the line. Anyone can help me to find the correct user exit ?
    Thanks and regards
    Jijo

    hii
    Exit Name Description
    SDTRM001 Reschedule schedule lines without a new ATP check
    V45A0001 Determine alternative materials for product selection
    V45A0002 Predefine sold-to party in sales document
    V45A0003 Collector for customer function modulpool MV45A
    V45A0004 Copy packing proposal
    V45E0001 Update the purchase order from the sales order
    V45E0002 Data transfer in procurement elements (PRreq., assembly)
    V45L0001 SD component supplier processing (customer enhancements)
    V45P0001 SD customer function for cross-company code sales
    V45S0001 Update sales document from configuration
    V45S0003 MRP-relevance for incomplete configuration
    V45S0004 Effectivity type in sales order
    V45W0001 SD Service Management: Forward Contract Data to Item
    V46H0001 SD Customer functions for resource-related billing
    V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
    SDAPO001 Activating Sourcing Subitem Quantity Propagation
    put a break point int he user exit and check.
    hope , this will solve ur problem.
    Regards,
    sabarinathan.L

  • Need to create screen exit for Sales Order Transaction

    Hi all,
    I need to show some additional data on 'ADDITIONAL DATA B' tab of the sales order transaction... I have created a project but not able to get the enhancements that are to be used...
    Will be really very heplful if you let me know, which one to use also why to use it...and how to determine which enhancement is to be used.... As i am new to User Exits...

    Hi ,
           Check out this exits.
    SDTRM001            Reschedule schedule lines without a new ATP check
    V45A0001            Determine alternative materials for product selection
    V45A0002            Predefine sold-to party in sales document
    V45A0003            Collector for customer function modulpool MV45A
    V45A0004            Copy packing proposal
    V45E0001            Update the purchase order from the sales order
    V45E0002            Data transfer in procurement elements (PRreq., assembly)
    V45L0001            SD component supplier processing (customer enhancements)
    V45P0001            SD customer function for cross-company code sales
    V45S0001            Update sales document from configuration
    V45S0003            MRP-relevance for incomplete configuration
    V45S0004            Effectivity type in sales order
    V45W0001            SD Service Management: Forward Contract Data to Item
    V46H0001            SD Customer functions for resource-related billing
    V60F0001            SD Billing plan (customer enhancement) diff. to billing plan
    SDAPO001            Activating Sourcing Subitem Quantity Propagation
    Check some of badi .
    Please reward if useful.

  • Customer downpayment for sale order

    Hi,
    we have a situation where customer will give an advance amount for a sale order. the same will be recorded with Spl GL indicator. now the users have to manually select those sales orders while clearing the advance payment. but due to compulsion the advance payments are knocked off with some other invoices.
    Is it possible to restrict clearing of this advance payment only with respect to that invoice of the sales order for which advance payment is made?
    Regards,
    Karthik

    For this you can create the validation in GGB0/ OB28 with the use of exit. (Your ABAPer can help in coding for the exit.)
    Standard SAP will not make any such restriction.
    Regards,
    SDNer

  • Exit for sales order?

    Hi Friends,
    I have one requirement related to sales order creation.
    when i entered the qty in sales order item
    it should validate whether this qty is multiple of minimum order qty maintained in
    material master in view of sales Sales Organization 1.
    other wise it should give error messge
    wot is the proper exit for this requirement?
    help ful information rewarded.
    Regards,
    Riaz.

    Hi Riaz,
    There are badis being called
    BADI_SD_SALES_BASIC
    BADI_SD_SALES
    however these are not available to implement at our end i believe.
    If you are working on ECC 6 then you have an Enhacement-section available which you can implement and enhance to attach your code, provided you know how to do it.
    ENHANCEMENT-SECTION     COBL_FUELLEN_01 SPOTS ES_SAPFV45P.
    in
    Program                            /      Include
    SAPFV45P                       /      FV45PF0C_COBL_FUELLEN
    Also Customer function exit
    EXIT_SAPLOMCV_001
    EXIT_SAPLOMCV_002
    EXIT_SAPLOMCV_901
    EXIT_SAPLOMCV_902
    is also getting called which you can check and might solve the purpose.
    Hope this helps.
    <b>Always reward points for useful suggestions .</b>
    regards,
    Vikas

  • User exits for Sales Order Data

    Hi,
    May i ask if there's any user exit that will get data from Sales order like ex. the order qty and the net price and pass to SHP_OBDLV_SAVE_REPLICA like ex in the segment  E1BPOBDLVITEMRFO of delivery note.
    or get the commodity code (STAWN) from MatMas and pass also to SHP_OBDLV_SAVE_REPLiCA
    Thanks in advance..
    aileen

    These are the user exits for VA01
    V45E0001 Update the purchase order from the sales order
    V45S0001 Update sales document from configuration
    V45S0004 Effectivity type in sales order
    V45W0001 SD Service Management: Forward Contract Data to Item
    V45A0001 Determine alternative materials for product selection
    V45A0002 Predefine sold-to party in sales document
    V45A0003 Collector for customer function modulpool MV45A
    V45A0004 Copy packing proposal
    V45E0002 Data transfer in procurement elements (PRreq., assembly)
    V45L0001 SD component supplier processing (customer enhancements)
    Use this also USEREXIT_SAVE_DOCUMENT
    Regards,
    Shamma

  • User exit for sales order creation VA01.

    Hi friends,
    While creating Sales order, before saving the document, I need to check the Customer (Sold to pary?) details in KNEX table. KNEX-KUNNR  KNEX-TDOCO KNEX-DHRCO. if condition fails, I need to display an error message V1525,
    which should contain
    1)customer(sold-to -party?KNEX-KUNNR)
    2)partner function PARVW  (VBPA-PARVW?)
    3)country LNDEX KNEX-LNDEX
    Functional spec says, 1)V45A0002
                                  2)V45A0003
                                  3)V45S0001
                                  4)V50EPROP User exits can be levaraged.
    1)triggers before we enter customer (sold-to-party) in VA01. so may not be used.
    remaining i tried, but I am not able to get the proper PARVW, LNDEX from function module parameters / structures like VBAP/VBPA etc.
    Please help me the way.
    i) the above user exits can be used?if not, help me with user exit name.
    ii)if yes, how to fetch PARVW  , LNDEX, KUNNR...as all the primary keys must be used in the selection query.
    Please help me ASAP.

    Hi,
    Use this enhancement V45A0002.
    Reward points if it helps,
    Satish

  • User Exit for sale order for adding a new partner

    Hi
    i am having the Scenario to add a new partner in  sales order in both VA01 / va02 transaction .
    i am using the exit named MV45AFZZ .   (USEREXIT_MOVE_FIELD_TO_VBAP) for this scenario.
    Its perfectly working for VA01 , but not VA02 .. why ..
    can any1  explain me ..

    Hi Irfan,
    You want to add partners in Sales order, the partners data will be saved in VBPA table.
    The USEREXIT_MOVE_FIELD_TO_VBAP is used for values for fields at sales document item level.
    For you its working for VA01 because , you have modified the strucure XVBPA for partners
    data and it is not saved yet to the database table so it is available in VA01 and in VA02
    it is checking the VBPA table there this data will not have been saved please check VBPA
    for your sales order.
    Please check below things.
    1) Check whether you have passed UPDKZ in XVBPA UPDKZ has below values INSERT (I),DELETE (D),UPDATE(U) etc nad
    if it doent works
    2) Please check the SAVE_DOCUMENT_PREPARE form and check XVBPA here whether it contains the
    entries you modified if not use the same code as you used in USEREXIT_MOVE_FIELD_TO_VBAP
    then these changes will be saved to database and hopefully you will get it in VA02 as well
    also pleaseuse the flag UPDKZ whenever you modifying this tables for your case
    XVBPA-UPDKZ.
    Regards,
    Pawan

  • User exit for sale order material serial number change

    I am looking for User exit for changing the serial number for the saleorder material va01.

    Hey,
      Check the include program : MV45AFZZ. it will trigger at the of saving the sale order.
    IF SY-TCODE EQ 'VA02' OR SY-TCODE EQ 'VA01'.
    Endif.
    Note : Write your coding inside the IF clause to avoid affecting the other transaction codes.
    Regards,
    Saravanan M

  • User exit for sale order qty change

    Hi all,
    In our industry we are creating Sale Order for MTO Scenario by using T.Code VA01 . Most of the time after taking the MRP run and raising PO for BOM components, Users are changing the qty in the sale order . eg. and due to that it is becoming difficult to make necessary change in production programe. .Now please give me solution/ userexit  so that anybody cannot change the sale  order qty and it must be check the authorised userid to do necessary change in sale order.
    I am waiting for your valuable suggestion.
    Thanks & Regards

    Hi LIMAYE,
      You can use user exit include 'MV45AFZZ'.
    Make necessary changes in FORM USEREXIT_MOVE_FIELD_TO_VBAP.
    XVBAP will contain the old values before making the changes. You can comapare the quantity wtih VBAP field.

Maybe you are looking for