Customer exit - Web item
Hi experts,
BW 3.5
I have a question:
The customer exit variable is the same in Bex Analyzer and in web item???
Because I have a message in step=3 and in the web item doesnt appear.
any idea?
HI,
Web temples are those which are built on the BEx Query , any changes made in Bex Query will automatically reflects to the Web items.
Customer Exit not Dependent with the Web Item .
to be more precise Web acts as a platform to execute the reports based on the Bex reports created.
Hope this helps
santosh
Similar Messages
-
How to pass parameter values to a customer exit web item (WAD)
Hi gurus,
I have a wad with a data provider and a filter panel filtering that dp by using a variable. There is also a customer exit which saves the values of that variable into a z table.
How can I pass the values of the filter panel to the customer exit web item?
Thanks in advance,
RobCan you clarify your scenario? Which is the case you're talking about?
1) You want to pass a parameter from OmniPortlet to a PL/SQL procedure.
2) You want to pass a parameter from a PL/SQL procedure to OmniPortlet.
In both cases the most obvious way of doing it is through request (URL) parameters.
Render a link in your portlet (either in OmniPortlet or using PL/SQL) that invokes a portal page, containing the other portlet.
Both OmniPortlet and PL/SQL allow you to wire and access page parameters.
Take a look at the Using Parameter and Events section of the Portal User's Guide and the Parameters and Events section of the Portal Developer's Guide.
Hope this helps,
Peter -
HI Any body could give detail explaination about what can be done with custom extension web item.
Please give me different scenairios where it can be used the best. if anybody used in realtime . it will be great if provide some abap code and details which should be considered in the code (etc Xml input and output paramters ).
Thanks in advance.
Points will be awarded.
SaniaHi Sania,
Please go through this blog by Kai Watcher, here it's explained along with code:
/people/kai.wachter/blog/2005/05/23/how-to-create-own-items-in-bw
Hope it helps...
Cheers,
Habeeb -
Use Custom Extension Web Item to Retrieve DSO Data Directly
Hi experts,
Is it possible to use Custom Extension Item in BEx WAD to retrieve DSO data directly? The idea is to display master data for a line item (e.g. customer name, id, address etc.) in the header section of a Web Template. If it is possible, how can I implement that?
If not, is there any other possibility to fulfill the requirement?
Thanks in advance.
Regards,
JoonHi experts,
any update on this?
Thanks,
Joon -
Web Item Analysis Modification Modules
Samples provided by SAP for Web Item Analysis Modification are
4) Negative Number module (com.sap.ip.bi.rig.NegativeNumber)
Depicts negative numbers in a column or entire table in red.
Hi SDN Community,
I have recently been exposed to Web Interface in BI7, (having previously worked in BW35 on Table Interface Class)
How do we ensure that the modules are activated as per the SAP documentaiton.
Are there transactions/documentation available?
Finally, once I get past this point, i found a document on the web that explains how to use one of these Exception modules,
In the case of the negative number module, do you know if the numbers are displayed in red font when negative, (and in the same column)
Thank you.
SimonPart success!
I used this module, and sure enough, the negative colours are red. It must have been already active.
Now, to change the sign, to positive... is there a standard module, or will this require some ABAP or java coding.
for example, do i require to do this?
ABAP Class for the Custom Extension Web Item
Thank you.
Simon -
Hi All,
I have to customize the Analysis web item by adding an extra column for user to put in comments for each row and the comments should be saved.
Is there a way to do this using Modification parameter in the parameters for Analysis web item or using Custom Extension web item ?
Can you please suggest how it can be done?
We are on BI 7.0 and we don't have the above mentioned 2 options in our WAD . But read the documentation on the help portal and thought there is way to do it. Our basis team is working on it to get those 2 options available in WAD.
Please let me know the steps to achieve it.
Thanks,
PrasadHi
Also chk these links whether this could be of any help :
http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d8/f3a83adae1a010e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/b3/f4b1406fecef0fe10000000a1550b0/content.htm
Regards -
Default value of BeX customer Exit variable not Displayed in WeBI??
Hello Experts,
We are stuck with a problem where WeBI report is created on top of BeX query and we are not able to see the default value of Bex Customer exit variable in WeBI run. Here is the complete scenario:
1. One restricted KF is created in BeX, restricted with Customer exit variable on net Due date. And this variable is mandatory, ready for input, and Default value in calculated is user exit as current Week's Monday.
2. So, by default KF data should be restricted to Monday of current week, if user does not change this value.
3. Now, WeBI report is created on top of this Bex query, and all is working fine, i.e. we are getting variable as Prompt in WeBI, but Default value is not shown while Running the Webi Report.
So, need your inputs on the same, if default values from BeX in WeBI is supported or not? If yes, why this is happening, and how to resolve it?
Please notice, the restrcition is in KF only, it is not a separate restrcition on Net Due date in Filter area or in Defualt area of BeX
and we are on SAP BW 7.1 and BOXI 3.1 SP4.
Regards,
Vipul
Edited by: VIPUL GOYAL on Nov 23, 2011 9:44 PMHi,
See 1285993 - Support of Customer Exit Variables from BEx query into WebIntelligence via OLAP universe
WebI will prompt when executed, but the default values calculated by the user exit - do not appear.
Note: If the BEx variable has property 'ready for input' set / enabled, then its WebI prompt shows ok, but no default value appears.
Cause
This behaviour expected 'by design' (in the context of the product's current limitations) as explained in the online guide below:
Please refer to Chapter 7, page 44, document link here: http://help.sap.com/businessobject/product_guides/boexir3/en/xi3_sap_olap_universes_en.pdf
Characteristic variable > processing type > Customer Exit is "Supported, without user entry"
--> This should be understood as meaning "User will not be shown a prompt"
regards,
H -
UserExit or Customer Exit for F110 - '*' on Vendor Line Item Payment Run
Dear all,
Background
Currently in F110, when processing for vendor payments, the item text ( or segment text) is only printed out when item text begins with an asterik ' * '. The asterik is meant to indicate that this document/item is posted from external system. You may do a F1 on the text field for detail explanation.
In the event, asterik is not present on the item text even if the text is not blank, it will not be printed at all.
Here are two OSS notes on the asteriks: 312623 and 1292333.
Include: F110SFS0_SATZ_KOMPLETTIEREN
*------- Segementtext
IF REGUP-SGTXT(1) NE '*'.
REGUP-SGTXT = SPACE.
ENDIF.
Requirement
User is requesting for item text to be printed at all time, when the text exist, regardless of ' * '.
Question
Does anyone know of a user exit / customer exit that i could use to do modification for SGTXT ?
Would appreciate it, if you could share your suggestions / experiences - on this matter, even if it doesn't need to be resolved through user exits. Thanks in advanceBTW..you have fot following exits for F110;
Transaction Code - F110 Parameters for Automatic Payment
Enhancement/ Business Add-in Description
Enhancement
RFFOX074 Frame for user exit RFFOX074 (in program RFFOCH_U)
RFFOX075 Frame for user exit RFFOX075 (in program RFFOCH_U)
RFFOX081 Frame for user exit RFFOX081 (in program RFFOF__T)
RFFOX082 Frame for user exit RFFOX082 (in program RFFOF__T)
RFFOX100 Frame for user exit RFFOX100 (in program RFFOUS_T)
RFFOX101 Frame for user exit RFFOX101 (in program RFFOUS_T)
RFFOX102 Frame for user exit RFFOX102 (in program RFFOUS_T)
RFFOX103 Frame for user exit RFFOX103 (in program RFFOUS_T)
RFFOX104 user exit
RFFOX105 Frame for user exit RFFOX105 (in program RFFOUS_T)
RFFOX200 Frame for user exit RFFOX200 (in program RFFONZ_T)
RFFOX210 Frame for user exit RFFOX210 (in program RFFOAU_T)
RFFOX211 Frame for user exit RFFOX211 (in program RFFONZ_T)
RFFOX230 General program for user exit RFFOX230 (in program RFFOJP_L)
RFFOX240 Enhancement for User Exit 240 (RFFOAT_P)
RFFOX250 Enhancement for User Exit 250 (RFFODK_E)
RFFOX901 Framework for user exit RFFOX901 (in program RFFOM100)
RFFOX902 Framework for user exit RFFOX902 (in program RFFOM100)
FDTAX001 Enhancement to Transaction FDTA (event after the download)
FEDI0002 Function exits for EDI DOCS in FI - Incoming pyt adv.notes
FEDI0003 Function exits for EDI docs in FI - Save PEXR segments
FEDI0004 Function exits for EDI docs in FI - particular events
FEDI0006 Function Exits for EDI-docs in FI: Save IDCR Segments
RFFOX003 Frame for user exit RFFOX003 (in program RFFOM100)
RFFOX041 Framework for user exit RFFOX041 (in program RFFOBE_I)
RFFOX042 Framework for user exit RFFOX042 (in program RFFOBE_E)
RFFOX043 Framework for user exit RFFOX043 (in program RFFOBE_D)
RFFOX061 Frame for user exit RFFOX061 (in program RFFOCH_P)
RFFOX062 Frame for user exit RFFOX062 (in program RFFOCH_P)
RFFOX063 Frame for user exit RFFOX063 (in program RFFOCH_P)
RFFOX064 Frame for user exit RFFOX064 (in program RFFOCH_P)
RFFOX065 Frame for user exit RFFOX065 (in program RFFOCH_P)
RFFOX066 Frame for user exit RFFOX066 (in program RFFOCH_P)
RFFOX071 Frame for user exit RFFOX071 (in program RFFOCH_U)
RFFOX072 Frame for user exit RFFOX072 (in program RFFOCH_U)
RFFOX073 Frame for user exit RFFOX073 (in program RFFOCH_U)
Business Add-in
FI_BSTM_MC_EXIT FI Account Statement: Exit from MultiCash Conversion
FI_F110_SCHEDULE_JOB F110: Check before scheduling a proposal/update run -
Customer Exit Variable not working in BO-Webi Report
Hi All,
I have created a universe based on Bex Query.
Bex query consists of a customer exit variable on Calendar year/month where in it will populate current calendar year month by default while executing the query. It works fine while executing in SAP BI Bex Analyser.
I have created a universe based on the query. For Calender year/Month i got L00, L01, LOV values in universe.
Based on the universe I have created a Webi report. I did not specify calendar year/month as query filters. While directly executing the Webi report, I get the calendar year/month variable screen. But the value for it not populated based on customer Exit code written in BI.
What has to be done to get the customer exit values in variable screen.
Thanks for your understanding.
-- SelvaSince you have customer exit variable in your bex query, it will be like a global filter in your universe.
Execute the webi report and check whether you are getting only current month data.
--- Thanks -
Population of Customer Exit Variables in Web Template Queries
Hello,
Desired Scenario:
I have three Queries: Q1, Q2, Q3, attached to one Web Template in the same order. Queries Q2 and Q3 have exit variables which are populated from the Input Variable of Query Q1 (these customer Exit variables are mandatory, not available for user input and are populated in STEP=2).
Problem:
Sometimes on execution of the template, Q1 is executed first and then the exit variables are populted (which is OK) BUT sometimes Query Q2 or Q3 is executed first and exit variables don't get populated.
As such, I am not sure of the order these three queries are executed. Please suggest how do I ensure that Q1 is always executed first, followed by Q2 or Q3.
Thanks for your suggestions.
Best Regards,
SumitaHi,
The Infoobjects are different in all the three queries. In Q1, the variable is on 0CALWEEK. In Q2, the variable is on XWEEKD (which is reference to 0CALWEEK). IN Q3, it is on XFORWEEK (which is again reference to 0CALWEEK). So, I can't use the same variable in all three queries. But all these variables have to have the Week from to Week To as the input and that input remains same for all three variables.
To prevent the user from entering this week from & to thrice, we populate the other two in customer exit depending on the value input by the user.
So, now I want to know the order in which the queries attached to a Web Template are executed.
Best Regards,
Sumita -
How to use a customer exit in WebI
Hi expert,
I read from official SAP document that customer exit variable are supported within WebI query.
I created an universe based on a query bex. In this query I use a variable exit for 0calmonth2.
Within the WebI universe I don't see any variable.
How can I use/build a customer exit variable in my WebI query?
System feature: BO 3.1
Many Thanks.
ClaudiaHi,
I havethe same issue, even though I place the user exit variable in Filter section, its not working as expected in WEBI/crystal.
the variable that i have created will assign default value as sysdate.its working fine BW.
Are there any extra settings at BEX/BW level which have to be set before using user/sap exit variables in webi/crystal?
How should the user/customer exit variables be defined in order to get them carried properly to webi or crystal, I mean what should be the properties set for these variables? -
Passing messages from BW customer-exit variables to WebI
Hi
Is it possible to pass messages from a BW customer-exit variable to WebI?
We have a scenario where we have some validation done on a customer-exit variable, and under certain conditions a message should be returned to the user running the WebI report. Ideally, then report should stop executing at this time.
The ABAP is in place, and I can return an error message. If the query is run in RSRT / Web Template, the error message is correctly displayed and processing stops.
However, in WebI, if the error condition is met, a rather messy looking generic error message is displayed. In this case, the error number I've used in the ABAP is 000, which WebI then interprets as somthing to do with query dimensions could not be retrieved, or a null pointer exception.
I am not interested in the WebI error message that is being generated ... I know why it is being generated.
All I'd like to know is whether it is possible to pass an error message from within the customer exit code back to WebI.
Any ideas?
Regards,
AndrewHi,
I think that the problem is the User Exit is called anew for every query, so the global tables you declared will be empty for the query2.
One way to do this is create a table using the SE11 and populate it with the Variable from Query1, and use this data to populate the Variable2 of Query2.
Hope it helps. -
WAD Web Item : Custom Extension
Hi,,
I have created a class for basically exporting data to excel sheet. i have created a web item custom extension and mapped the class to it through the parameters DP:included data provider details, variable details, navigation access and result set access.
and ultimately mapped to Button.
now when i am executing the Button doesnt work, so i have created a break point in the methods initialize and execute inside the class, but it doesnt seem to work. please suggest, if i have missed something while creating class/webitem/button.
I am basicaly trying to Export data to excel through class.
RegardsAny suggestions?..
-
Still possible to create custom web items in WAD 7.0?
Hi,
in WAD 3.5 I was able to create custom web items and use them in the WAD after making the correct entries in the RSRRENDERER tables. Today I tried to do the same in an 7.0 environment, however, I didn't find my web item in the left hand side in the WAD. Is it still possible to create you own web items in 7.0?
Kind regards,
TomHi,
Pls chk this;
[https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/spat/index.htm?sp1=SAPKW70012]
SAPKW70012 - change the last 2digits to the SPlevel you need to see all the included notes in that SP
Hope this helps,
regards
CSM Reddy -
Web item for a custom large block of text
Hi all,
I want to include a large block of text in one of my web templates. I could just type it there in a table or something like that, but I'd like it to have the same look and feel as the rest of the web items.
Is there any web item I can use to include that text, so that I can have the nice blue, collapsible boxes, with a title and all the works?
Thanks a lot in advance for your help.Assign a BEX-style-class to your text.
You could insert your text into a cell of a table and assign a style to that cell.
<td class=SAPBEXstdItem>'your text'</td>
Regards,
Beat
Maybe you are looking for
-
Declaring a variable to be of a type of a table's column in another schema
Hi, Can anyone please explain why is the below procedure not working, but the same is working when written in a declare begin block: --exception:Compilation errors for PROCEDURE BOOK_STG.TEST Error: PLS-00201: identifier 'BOOK.POLICY_METHOD' must be
-
Lightroom Unable to Import HDR Image File Opened as Smart Object
I just started using Nik HDR Efex Pro and created an image file in PS CS4 Extended which was opened as a smart object and saved to play around with later. The image shows up in Photoshop as "[image number]_hdr.tif" and both PS CS4 Extended and CS5 h
-
I have a ipod classic and my itunes will not recognize it under devices when I have it plugged into my computer. I have restored the ipod and itunes is up to date on my computer. I have not been able to get my music to sync onto this ipod. Thanks for
-
Account details for this user can only be updated via the site where it was first created.
-
Hello, I am submitting a string of numbers delimited with commas from a form to be utilized by a JavaScript function. Here is the string of number I am submitting: 7.4%,0.1%,0.4%,9.7%,53.1%,0.5%,15.5%,4.8%,1.6%,5.7%,1.0% Here is the function: functio