Customer exits for currency field in generic extractor
Hi,
I had a requirement to create a generic extractor. I've created a generic extractor by name 'ZXXZ_XXX_TAX_ATTR'. This extractor was created based on a table T007V in turn view. It has a currency and a quantity type field. Those two fields were not refering to a table fields but were refering a structure. So as per the note 335342, if we have fields of curr/quan type and are having reference fields as a structure field, we need to populate those fields throught a customer exit.
As I have read that the same problem has been solved by you with customer exit. So can you mail me the exit code as I am not a good in ABAP.
Regards,
Amol Gaurkar
Hi Amol,
Here is the code below,
TYPES: BEGIN OF TY_T007V,
TRKORR TYPE TRKORR,
ALAND TYPE ALAND,
MWSKZ TYPE MWSKZ,
TXJCD TYPE TXJCD,
DATAM TYPE DATAM,
KSCHL TYPE KSCHL,
KBETR TYPE KBETR,
END OF TY_T007V.
DATA: T_T007V TYPE STANDARD TABLE OF TY_T007V,
T_EXTRSTRU TYPE STANDARD TABLE OF <b><Extract Structure></b>,
**-- Work Area
W_T007V TYPE TY_T007V,
L_TABIX TYPE SY-TABIX.
CASE I_DATASOURCE.
WHEN 'ZXXZ_XXX_TAX_ATTR'.
REFRESH: T_T007V.
CLEAR: W_T007V,
L_TABIX.
T_EXTRSTRU[] = C_T_DATA[].
IF NOT T_EXTRSTRU IS INITIAL.
Fetching all the records into internal table T_T007V from the transparent table T007V
SELECT TRKORR
ALAND
MWSKZ
TXJCD
DATAM
KSCHL
KBETR
INTO TABLE T_T007V
FROM T007V
FOR ALL ENTRIES IN T_EXTRSTRU
WHERE TRKORR = T_EXTRSTRU-KOKRS
AND ALAND = T_EXTRSTRU-ALAND
AND MWSKZ = T_EXTRSTRU-MWSKZ
AND TXJCD = T_EXTRSTRU-TXJCD
AND DATAM = T_EXTRSTRU-DATAM
AND KSCHL = T_EXTRSTRU-KSCHL.
IF NOT T_T007V IS INITIAL.
SORT T_T007V BY TRKORR ALAND MWSKZ TXJCD DATAM KSCHL.
LOOP AT T_EXTRSTRU INTO W_EXTRSTRU.
L_TABIX = SY-TABIX.
READ TABLE T_T007V INTO W_T007V
WITH KEY TRKORR = T_EXTRSTRU-KOKRS
ALAND = T_EXTRSTRU-ALAND
MWSKZ = T_EXTRSTRU-MWSKZ
TXJCD = T_EXTRSTRU-TXJCD
DATAM = T_EXTRSTRU-DATAM
KSCHL = T_EXTRSTRU-KSCHL
BINARY SEARCH.
IF SY-SUBRC = 0.
W_EXTRSTRU-KBETR = W_T007V-KBETR.
MODIFY T_EXTRSTRU FROM W_EXTRSTRU INDEX L_TABIX.
CLEAR W_EXTRSTRU.
ENDIF.
CLEAR: W_T007V,
L_TABIX,
W_EXTRSTRU.
ENDLOOP.
ENDIF.
REFRESH C_T_DATA.
C_T_DATA[] = T_EXTRSTRU[].
REFRESH: T_T007V,
T_EXTRSTRU.
ENDIF.
ENDCASE. "ENDCASE FOR RETREVING THE EXTRACTOR
<b>Reward points if this helps,</b>
Kiran
Similar Messages
-
How to select data from an aggregate in a customer exit for a query?
Hi,
I have written a virtual key figure customer exit for a query. Earlier the selection was from the cube, where there was severe performance issue. So I have created an aggregate, activated and have loaded the data.
Now when I select that data I find that the Key table is different in development and production. How do I resolve this.
My code is attached below. The table in developemnt is KEY_100027 and in production is KEY_100004. This code is activated and running in BW development server.
SELECT
F~KEY_1000041 AS K____035
F~KEY_1000271 AS K____035
F~QUANT_B AS K____051
F~VALUE_LC AS K____052
INTO (xdoc_date, xval1, xqty1)
UP TO 1 ROWS
FROM
FROM
*/BIC/E100004 AS F JOIN
/BIC/E100027 AS F JOIN
/BIC/DZMM_CGRNU AS DU
ON FKEY_ZMM_CGRNU = DUDIMID
JOIN /BI0/SUNIT AS S1
ON DUSID_0BASE_UOM = S1SID
JOIN /BI0/SCURRENCY AS S2
ON DUSID_0LOC_CURRCY = S2SID
JOIN /BI0/SMATERIAL AS S3
*ON FKEY_1000042 = S3SID
ON FKEY_1000272 = S3SID
JOIN /BI0/SMOVETYPE AS S4
*ON FKEY_1000043 = S4SID
ON FKEY_1000273 = S4SID
JOIN /BI0/SPLANT AS S5
*ON FKEY_1000044 = S5SID
ON FKEY_1000274 = S5SID
JOIN /BIC/D100004P AS DP
*ON FKEY_100004P = DPDIMID
ON FKEY_100027P = DPDIMID
WHERE
WHERE
( ( ( ( F~KEY_1000041 BETWEEN 20051230 AND 20060630 ) ) AND ( (
( ( ( ( F~KEY_1000271 BETWEEN 20051230 AND 20060630 ) ) AND ( (
S3~MATERIAL = <l_0material> ) ) AND ( (
s2~movetype BETWEEN '101' AND '102' OR
s4~movetype BETWEEN '921' AND '922' OR
s4~movetype BETWEEN '105' AND '106' OR
s4~movetype BETWEEN '701' AND '701' OR
s4~movetype BETWEEN '632' AND '632' ) ) AND ( (
S5~PLANT = <l_0plant> ) ) AND ( (
DP~SID_0RECORDTP = 0 ) ) ) )
GROUP BY
ORDER BY F~KEY_1000271 DESCENDING.
IF sy-subrc NE 0.
EXIT.
ENDIF.
ENDSELECT.
How do I transport the code and make it work?
Whats the reason that the two key fields are different.
I had transported the aggregate from development to production. Activated it and filled the data.
What is the way out? Please help.
Regards,
Annie.Hi Sonu,
The main task is to move the contents of the one internal table to another with some condition.
First sort and delete the duplicate entries from the First Internal table like below :
sort it_tab by material ascending date_modified descending.
delete adjacent duplicates from it_tab.
Then move that Internal table contents to another internal table.
Define another internal table with the same structure as you have first internal table and then
Second Step :
it_itab1 = it_itab.
If you are using seperate Header line and Body then you can do like below :
it_itab1[] = it_itab[].
This will fix the issue.
Please let me know if you need any further explonation.
Regards,
Kittu
Edited by: Kittu on Apr 24, 2009 12:21 PM -
How to find table name for the fields from Standard Extractor in CRM system
How to find table name of fields from the standard extractor in CRM system ?
e.g. We use LBWE TCode in R/3 system to find table name for the field from Extractor VCSCL(e.g.).
Likewise is there any way to find table name for the fields from Standard extractor like 0CRM_LEAD_I.Hi ,
Please find the link below for understanding BW CRM analysis.
http://help.sap.com/bp_biv135/html/bw.htm
activate the CRM DSs by scenario:
1) Activate the application component hierarchy (tcode RSA9). Changes made to the application component hierarchy in the CRM system can be transferred to the BW using the "Edit Application Component Hierarchy" (SBIW - Postprocessing of DataSources).
SAP Note 434886 must be implemented in CRM 3.0 before the application component hierarchy is activated.
2) Activate the Business Content DataSources (tcode RSA5).
Select/enter the application component and choose Execute (F8).
To compare the shipped and active versions, choose the 'Select Delta' pushbutton. If there is no active version of the DataSource, it is selected automatically.
To activate the shipped version, choose the 'Transfer DataSources' pushbutton.
3) Management of the versions of the BW-Adapter metadata (tcode BWA5). All DataSources are displayed that are managed by the BW Adapter.
As in transaction RSA5 (Service API Metadata Activation), the 'Select Delta' function can be used to select the inactive DataSources or compare shipped and active versions.
You can also go directly to the screen for maintaining DataSources that are managed by the BW Adapter.
The 'Compare Version' function makes a detailed comparison of the shipped and active versions.
All BW-Adapter metadata is considered when versions are compared:
Header information (Table SMOXHEAD)
Mapping information (Table SMOXRELP)
Global selection conditions (Table SMOXGSEL)
Attribute key fields (Table SMOXAFLD)
Hope this helps.
Regards,
csm reddy -
Customer exit for Batch management
Hi experts,
I'm using customer exit for batch management for internal number assignment.
I need the Batch number as i mentioned below
DDMMYYB01
DD-Date
MM-Month
YY-Year
B-Block
01-Number
For this i need to give logic. How to give i'm not getting. This batch number creation will come at the time of GR.
Anybody help me?
NarenHi
Please use the user exit SAPLV01Z as I mentioned in your other thread, please go to SMOD to read its documentstion.
In SMOD, select the 'Documentation' and click 'Display', this will show the overview documentation.
Select the 'Componnet', then ciick the 'Display'. select each component and click 'Documentation Ctrl+F4) this will show the detailed documentation of them.
Best Regards.
Leon. -
Negative sign for Currency fields
Hello experts,
If a currency field containt -Ve sign (86.47-) then, i have to move it this sign to Left sinde. I have do this as follow by moving the currency field value to Charractor field
DATA: w_total1 (18).
MOVE w_total To w_total1.
IF w_total1 CA '-'.
SHIFT w_total1 RIGHT CIRCULAR.
ENDIF.
CONDENSE w_total1 NO-GAPS.
But don't want to move this to Chanddacter field for other pupepose. Now how can i **** the -Ve sign to left side for currency field, IF bsid-shkzg EQ 'H'.
Thanks.Hi sandhya ,
Try this :
DATA: w_total type string ,
w_total1 type string.
w_total = '1,4567.7-'.
MOVE w_total To w_total1.
IF w_total1 CA '-'.
SHIFT w_total1 RIGHT CIRCULAR.
ENDIF.
* CONDENSE w_total1 NO-GAPS.
write : / w_total1.
Hope all your issues are fixed now .
Regards ,
lokesh
Edited by: Lokesh Pattnayak on Oct 11, 2010 10:23 AM -
Custom Exit for determining previous-year time range
Dear all:
I have a problem about custom exit:
We have created a new object for combining Fiscal Year/Month and Period. So the format will be shown as " yyyymmp"
now we have one requirement which is determining the same period but previous year based on user input. For Example, if user input start and end period as
"2006041" and "2006111". There are should be 2 custom exit which are able to convert the user input to be "2005041" and "2005111". We created 2 custom exit for telling the previous-year period.
Then based on this converted time range, we should be able to extract applicable data. But after testing, we cant get supposing result. The code is following:
We will be very grateful for any input. thank you all so much
Calculate (Start)previous year/month/period by current
*year/month/period
*user-entry calendar year/month/period
WHEN 'ZFACLV19'.
LOOP AT i_t_var_range INTO loc_var_range
WHERE vnam = 'ZFACYMP1'.
CLEAR l_s_range.
LOC_YEAR = LOC_VAR_RANGE-LOW(4).
LOC_MONTH = LOC_VAR_RANGE-LOW+4(2).
LOC_YEAR = LOC_YEAR - 1.
L_S_RANGE-LOW(4) = LOC_YEAR.
L_S_RANGE-LOW+4(2) = LOC_MONTH.
L_S_RANGE-LOW6(1) = LOC_VAR_RANGE-LOW6(1).
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
EXIT.
ENDLOOP.
Calculate (End)previous year/month/period by current
*year/month/period
*user-entry calendar year/month/period
WHEN 'ZFACLV20'.
break ab_william.
LOOP AT i_t_var_range INTO loc_var_range
WHERE vnam = 'ZFACYMP2'.
CLEAR l_s_range.
LOC_YEAR = LOC_VAR_RANGE-LOW(4).
LOC_MONTH = LOC_VAR_RANGE-LOW+4(2).
LOC_YEAR = LOC_YEAR - 1.
L_S_RANGE-LOW(4) = LOC_YEAR.
L_S_RANGE-LOW+4(2) = LOC_MONTH.
L_S_RANGE-LOW6(1) = LOC_VAR_RANGE-LOW6(1).
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
EXIT.
ENDLOOP.
SzuFenHi,
Try with following modifications:
ZYEAR1(4) = LOC_VAR_RANGE-LOW(4).
ZYEAR1(4) = ZYEAR1(4)- 1.
ZMONTH1(2) = LOC_VAR_RANGE-LOW+4(2).
CONCATENATE ZYEAR1(4) ZMONTH1(2) INTO LOC_VAR_RANGE-LOW(6).
With rgds,
Anil Kumar Sharma .P -
Problem in creating include program for customer exit for BC425_01
Hi,
I want to write a customer exit for transaction BC425_01. For identifying the include program for exit , i go to System->Status.There I double click on the program name(GUI).Then I perform a 'FIND' in main program for 'customer-function' keyword. I get 3 search results with "CALL CUSTOMER-FUNCTION '001' " , "CALL CUSTOMER-FUNCTION '002' " , "CALL CUSTOMER-FUNCTION '003' ".
Now i double click on CALL CUSTOMER-FUNCTION '001' and i am taken to the code of program where this function is called in MODULE cust_check INPUT. I double click on CALL CUSTOMER-FUNCTION '001' and then I am taken to the function module code which contains a single statement 'INCLUDE ZXBC425G01U01 .' .
Now I double click on this include program so that I can write my own code. But when i double click on it , a message displayed 'Program names ZX.. are reserved for includes of exit function groups'. Hence I am not able to creates this include program and write my coding.
Kindly Help
THANKSHi Amber,
Then you click enter button.It is asking to create object with that include name ZXBC425G01U01 in a pop-up.You should select YES option.It will ask package . Give the package name and save.Then include program is created and allowed you to write your own code.
Thanks,
Prasad GVK. -
How to Write a CUstomer Exit for a variable in BEx
Hi,
How to write a customer exit variable in bex Query designer
Do i need developers key for this (If so what type of key do i need so that i can ask basis tean to generate)
Info Object: ZEXP_DTE (Expiry Date)
Variable on ZEXP_DTE :
ZEDTE
Type: Customer Exit
Can any one please tell me how to write a code in CMOD from this (Step-by Step)
Expiry Date > Current Cal Day
As arun said
'l_s_range-low = SY-DATUM.
l_s_range-opt = 'I'.
l_s_range-sign = 'GT'.
APPEND l_s_range TO e_t_range.'
I want to insert the above code for the above customer exit but as i am new to BW as ABAP please explain me what are the steps involved in CMOD
ThanksHi,
To write customer exit for a variable, you require Access key.
Contact your BASIS to get that.
Access Key,BASIS?
To write Customer exit,
User Exits
User Exit for Variable
/thread/809285 [original link is broken]
Hope these helps u...
Regards,
KK. -
How to find out query name in customer exit for variables
We use the same customer exit variable in different queries. In the customer exit we want to find out, which query has called the customer exit. With the technical query name we want to read a master data table entry.
e.g. If we come from query ZG1_TEST1 we want to use selection sel1
Query name | selection
ZG1_TEST1 | sel1
ZG1_TEST2 | sel2
How can we find out the query name in the customer exit for variables?
Thanks for your help,
EviHi Evi,
check out the structure I_S_RKB1D in your exit. It contains the query.
Siggi -
Customer Exit for Calendar Month based on the day (system Date)
Hello,
I need help in creating a customer exit for Calendar month without the user input. The logic is as follows:
For the BEx variable created with customer exit option and no user input:
If the day on the system date falls in between 1 to 14 take the calendar year/month value as previous month.
If the day on the system date falls in between 15 through 31 then take the calendar year/month as current month.
eg if report is run on March 24th2009 the calendar year/month variable should be calculated as 03/2009 (March 2009)
if the report is run on March 1st2009 the calendar year/month should be calculated as 02/2009 (Feb 2009).
The code should be effective when run in the first 15 days of Jan when the previous month would contain the previous year as well.
Thank You
SrishtiThanks Shanthi. I am trying to incorporate the logic when the query is run in beginning of Jan when the year should be the previous year.Following is the code.please let me know if it would work. Is there a way I can test it as well?
CASE I_VNAM.
WHEN 'ZCURCALMON'.
IF i_step = 2.
data: mm(2),
dd(2),
yy(4),
FM(6).
if sy-datum+4(2) EQ 1.
sy-datum(4) = sy-datum(4) - 1.
else.
sy-datum(4) = sy-datum(4).
endif.
if sy-datum+6(2) LE 15.
mm = sy-datum+4(2) - 1.
concatenate sy-datum(4) mm into FM.
else.
concatenate sy-datum(4) sy-datum+4(2) into FM.
endif.
l_s_range-low = FM.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
append l_s_range to e_t_range.
Endif.
ENDCASE.
Thanks
Srishti -
Missing new fields in generic extractor but present in table view
Hi
I can't see new fields in generic extractor but they are present in the table view.
Few days ago I created a generic datasource based on table view. Now I included 2 more fields in the table view but these fields doesn't show in RSA6 and RSO2.
how can i resolve this.
thanksHi Bhat,
GO to RSA5 and give ur generic extractor name ....
Click on edit the newly added fields will be hided ...so u need to uncheck the hide olumn
once this is done save that.
U will find the fields in RSA3 and RS02
Regards
vamsi -
Search help for currency field
I am not able any search help for currency field , CUKY of lenght 5
If anyone knows it please tellYou can use the data element WAERS / refer to field BKPF-WAERS. The search help will show up automatically as the field BKPF-WAERS, has check table TCURC.
Also see the "Origin of Input help" column in "Entry help/ check" tab in SE11 for table BKPF, it says - "Input help implemented with check table".
For example in tcode FB01, the currency field on the selection screen is BKPF-WAERS. The search help is displayed
Hope it helps -
Customer exit for IDOC_INPUT_SALESORDER_CREATEFR
Hi All,
I am doing the salesorder creation through IDOC_INPUT_SALESORDER_CREATEFR but i couldn't find any customer exit in this. I am in version 4.7.
Can anyone tell me if you find any user exit for this
Regards,Hi,
There are no customer exits for this particular FM I suppose.
If you require to modify you need to customize it and do the necessary changes.
Regards,
Sharath -
How to find CUSTOMER EXIT for a Standard SAP program
How to find CUSTOMER EXIT for a Standard SAP program
Hi
To introduce the techniques of enhancement in standard SAP system. SAP creates customer exits for specific programs, screens, and menus within standard R/3 applications. These exits do not contain any functionality. Instead, the customer exits act as hooks. You can hang your own add-on functionality onto these hooks.
They do not affect standard SAP source code.
When you add new functionality to your SAP System using SAPs exits, you do not alter the source code of standard SAP programs in any way. The code and screens you create are encapsulated as separate objects. These customer objects are linked to standard applications, but exist separately from SAPs standard software package.
They do not affect software updates.
When you add new functionality to your SAP System using SAPs exits, your objects (called customer objects) must adhere to strict naming conventions. When it comes time to upgrade a to a new software release, customer objects names ensure that they will not be affected by any changes or new additions to the standard software package.
Customer exits are not available for all programs and screens found in the SAP System.
Any change made to an SAP object in a customer system is called a modification. Customers usually modify their systems for one of two reasons. Either they make changes to the SAP standard in order to adjust the R/3 System to their specific business needs (actual modifications), or they alter individual SAP objects in order to correct an error (as recommended in an SAP error note).
You should only modify the SAP standard if the modifications you want to make are absolutely necessary for optimizing work flow in your company. Be aware that good background knowledge of application structure and flow are important prerequisites for deciding what kind of modifications to make and how these modifications should be designed.
SAP application programmers create SAP enhancements in transaction SMOD using function module exits, menu exits, and screen exits.
Customers are given a catalog containing an overview of existing SAP enhancements. They can then combine the SAP enhancements they want into an enhancement project using transaction CMOD.
SAP enhancements are made up of component parts. These components include function module exits, menu exits, and screen exits. A specific component may be used only once in a single SAP enhancement (this guarantees the uniqueness of SAP enhancements).
Customer enhancement projects consist of SAP enhancements. Each individual SAP enhancement may be used only once in a single customer enhancement program (this guarantees the uniqueness of a customer project).
SAP application programmers preplan function module exits, menu exits, and screen exits for their applications and combine them to create useful enhancements for the R/3 System.
Customers create their own enhancement projects for their systems using SAP enhancements. You can customize the individual components of an enhancement project by creating your own include programs (for function module exits), texts (for menu exits), and subscreens (for screen exits). -
Customer Exit for 13 month from current month
Hi Gurus,
I need a customer exit for 13 months from current month. Based on the requirement I have written following code
When 'VPI_13CALYRMON'.
IF i_step = 1.
l_s_range-sign = 'I'.
l_s_range-opt = 'BT'.
l_s_range-low = sy-datum+0(6).
l_s_range-high = sy-datum+0(6) + 13.
append l_s_range to e_t_range.
endif.
Please could you guide me the code.
Thanks
Ganesh Reddy.Hi,
I think you can do it in below way.
When 'VPI_13CALYRMON'.
IF i_step = 1.
temp1 = sy-datum+0(4).
temp1 = temp1 +1. (because adding 13 months would take year to next year)
temp2 = sy-datum+4(2).
temp2 = temp2 + 1. (after adding 13 months, the month would be one more than of previous year)
concatenate temp1 temp2 into temp3.
l_s_range-sign = 'I'.
l_s_range-opt = 'BT'.
l_s_range-low = sy-datum+0(6).
l_s_range-high = temp3.
append l_s_range to e_t_range.
endif.
Hope this helps.
Maybe you are looking for
-
Neo 2 Plat Bios 1.3... adjusting HTT freezes bios
I just built my system last night with the components below. Had problems with installing windows at first due to random lock-ups during the install process. Moved the raptor to sata 2 from 1 (learned today from reading that i'm gonna want to put i
-
GoldenGate Installation Queries...
Please help me on the below questions..?? I got some questions on oracle goldengate configuration: 1) My source and Destination are in different nodes, then do I need to configure listener @ target db and Tns @ source db? 2) If my source and destinat
-
So my computer has been randomly shutting down on me for the last couple of days. When I turn my computer back on it says a cooling error in one of my fans has occured. How do I go about fixing this problem so my computer doesnt keep randomly shuttin
-
I keep getting an error message when clicking on "download" I am told there is an error
Error message 100 when trying to download free trial. Help?
-
Anyone used a Kodak Zi8 and transferred into FCP? Need any converters? Or is log and transfer easy. Recording at 1080p Jayblum