Customer Field in ECC 6.0

Hi,
I need a help on custumer field in ECC 6.0.
I would like to know if there is a <b>standard</b> way to see customer fields in purchase or sales order.
Thanks very much.
Diego

Customer fields (as in KUNNR) or custom fields?
Bothe sales orders and POs have user-exit screens that can be employed to show <b>custom </b>fields both at header and item levels. In the case of sales orders, it is oft-referred to as "Additional Data B" screen. This is the last tab screen of the sales order.
Caveat: The above is from 46C, but am willing to bet that this feature still exists in the ECCs.

Similar Messages

How to transfer SRM PO Condition Type and Custom fields to ECC?

Hi All,
I have a scenario to transfer SRM Line item condition types and few custom fields to ECC.
I have found the following things but structure 'CI_EKPODB' does not exists in ECC.
I am using 'SRM 5.00' and 'SAP ECC 6.0'.
NOTE: I have to transfer condition records when PO is getting created / modified.
1) Earlier I was planning to use BADI 'BBP_CREATE_BE_PO_NEW' in SRM and this will transfer the data to ECC in case of PO
    Creation.
               It contains the Condition fields to be passed to ECC.
But i am unable to implement the same, whenever i create implementation when i click 'Activate' its getting activate then after few seconds its getting deactivate, i think this is because this BADI is not allowed for multiple use and SAP has already made one implementation on the same.
2) I need to implement BADI 'BBP_ECS_PO_OUT_BADI' in SRM and 'BBP_PO_INBOUND_BADI' in ECC.
SRM BADI will pass verified field details to ECC as a custom fields
       It does not contains the Condition fields to be passed to ECC, so i was planning to pass the same as custom field(s).
ECC BADI 'BBP_PO_INBOUND_BADI' will be used to map the fields to correct place and this should work.
i need to modify the structures and pass all the custom fields (z-fields) - (CI_EKPODB but does not exists kindly suggest) as data.
Other required details:
      Transfer of PO does not supported by SAP for service PO's, any suggestion on the same?
Expecting quick reply from your end.
Thanks in advance.
Regards,
Hemant

Naresh,
Thanks for quick response.
My concern is this BADI 'BBP_CREATE_BE_PO_NEW' will trigger only in case of creation, not when PO is changes.
I have to transfer condition types and custom fields to ECC in both the case (create / change)
If i have to do this only in case of creation then i can pass Condition types / custom fields then i can use parameter 'CS_PO1_DOCUMENT' from method 'FILL_PO_INTERFACE1'.
this parameter contains 'IT_POCOND', 'IT_POCONDX' and 'IT_EXTENSIONIN' as parameter so my problem will be solved.
But i dont think this will trigger in both the cases and 2nd thing i cann't implement the BADI since its not marked for multiple use so i am unable to implement the same.
Kindly correct me if i am wrong.
Once again thanks for your reply.
Please suggest on the same.
Regards,
Hemant

Adding Custom fields in ECC Business partner BP - (BUT000) using BDT or EEW

Hello BDT / EWWB Gurus,
We have a requirement to add custom fields to ECC Business partner, which interns create custom fields in But000 table.
I would be great if anyone could let us know how to add Custom fields using BDT or EEWB.
Please also elaborate the step by step process.
thanks.
Regards,
Preethi.

Hi Clemens,
Thanks for the reply.
I had read the document and it has given lot of information.
Actuall my requirement is to add custom fields in But000 table and the data will be controlled through BRFPlus application in TRM. Lot of forum thread suggesting to use EEWB to enhance the Business partner but000 table.
I would be great if you could let us know which methodalogy should I use to enhance the But000 table and what are all the impacts and also please let us know the process steps to enhance the but000.
Thanks.
Regards,
Preethi.

How to pass PO customer fields from ECC to SUS ?

Hi Gurus,
We defined a customer PO field at ECC side and want to pass it to SUS and diaplay it in SUS PO, my question is, how to pass PO customer fields from ECC to SUS?
Please advise.
Thanks and best regards
jack

Hi jackytam ,
/people/yeusheng.teo/blog/2008/01/05/ordering-unit-vs-order-pricing-unit-in-srm-sus
you make get some pointers
regards,
Neelima

Reservations creation with customer fields in ECC from SRM does not work?

Hi,
I have to create reservations into backend system (ECC) from shopping cart creation in SRM 7.0.
Reservation items contiain two customer fields.
RESB is extended by adding an append structure that contains an include with the data structure of the two customer-specific fields.
When reservation is created by BAPI_RESERVATION_CREATE1 function in ECC customer fields are filled.
In SRM I use FILL_RS_INTERFACE1 method of BADI BBP_CREATE_BE_RS_NEW.
When a shopping cart is created in SRM and then approved a reservation is created in ECC but customer fields are empty.
Why?
Thank you for your collaboration.
Best regards.
Al

http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90bd6f78-bcce-2a10-17ac-a74187b924ea?quicklink=index&overridelayout=true
Note 885458 - SRM partner maintenance: 'Add to invoicing party' is missing
Note 1034662 - BBP_VENDOR_SYNC: Invoicing Party not getting changed
in classic there may not be any issue since while creating a PO partner function automatically determined correctly int he ECC purchase order .
In SRM , we might pulled only VN vendors.
this could be one of the grey area in SRM Extended classic mode.
check with SAP and update SAP comments / suggection here.
Are PI (invoice party) and VN ( real supplier) vendor number ranges same?
Are many vendor VN and PI different?
Note 1022311 - SRM Integration: Partner at purchase order item level
In Supplier Relationship Management (SRM), you can maintain partners at item level. During the replication into the ECC back end, this partner information is no longer available because there are no partners for the document item in the ECC back end.
Other terms
Business Add-Ins:
ME_BAPI_PO_CUST, ME_PROCESS_PO_CUST, ME_GUI_PO_CUST, MB_MIGO_BADI, MRM_PARTNER_CHECK
let us wait for others reply
Muthu

What are the steps to send sales order custom field from CRM to ECC

Hi Xperts,
We have created a custom field in sales order [ VBAK] and successfully replicate its value from ECC to CRM. But while doing the enhancement to replicate the field value from CRM to ECC [ When the SO is created in CRM ] we are not able to do so.
We used a FM in CRM0_300, but while replicating the SO from CRM to R/3 it is not getting called.
Please help us by providing the steps to do the full enhancement to replicate the custom field of SO from CRM to ECC.
Thanks in Advance.

Hi Anjaneyulu,
We are faced with a similar situation as you.
Here is our scenario with the steps that we performed so far:
1. We have added a few custom fields in CRM 7.0 (Ehp1) using AET.
The BDoc BUS_TRANS_MSG has been automatically extended with these custom fields.
2. On ECC side also, same custom fields have been added to VBAK and VBAP, using APPEND STRUCTURE. Fields were added to ADDITIONAL DATA TAB B in VA01 / VA02 transactions.
3. Extended BAPI structures BAPISDITM and BAPISDITMX in both CRM and R/3 Side.
4. As mentioned in the note 1053817, we have implemented BADI CRM_DATAEXCHG_BADI -> Method CRM_DATAEXCH_AFTER_BAPI_FILL in CRM (mapped fields from BDOC to BAPI structures)
5. In the above note, for R/3 BAPI to R/3 API they have given to implement user exit USEREXIT_MOVE_FIELD_TO_VBAP which we found in MV45AFZZ. But in this we are unable to find BAPI Structure to map.
Our issue is, when a sales order is created in CRM, it is getting replicated on ECC. But, only standard fields are getting replicated. The custom fields that we have added are remaining empty on ECC side.
In CRM --> txn SMW01, we can see that the BDOC is populated with custom fields also.
Could you let us know if your issue is solved completely. Are you able to see the value of custom field, in ECC? Did you use AET to add fields in CRM.
Could you please give us the steps that you have done.

Passing custom field in contract in SRM to contract in ECC

Hi,
We are using SRM 7.0 with ECC 6 (no EHP). We're planning to use central contract distributed with IDOCs. Our contract in ECC has custom field added in the header. We have tried and successfully pass the contract from SRM to ECC (using IDOC BLAORD03 and COND_A).
I know we can create custom field in contract in SRM, but how to pass the value in the custom field in SRM contract to custom field in ECC contract? Do we need to edit IDOC BLAORD03? Is it possible?
Best regards,
Yosea

Hi,
Does anyone know the answer?
John

Custom fields transfer using ESOA in SRM 7.0 system

Hi SRM experts,
I have a requirement where in I will have to add some custom fields in the SRM central contract as well as the replicated contract in the backend ECC. I would like to understand how to handle the SRM ,ECC and XI part of the custom field mapping development since the central contract is transferred through XML medium.
    Currently I am on SRM 7.0 and ECC 6 Enh 4 using ESOA
    1. any SRM and ECC badi needs to be implement ?
    2. XI proxy need to modify ?
    Kindly advice and provide your valuable inputs
Thanks in advance.

Thanks for the information Tim,
In SRM u2013SUS system ,while transferring custom fields from SRM to SUS system we use XML OUT BADI and XML IN BADI and XI structure enhancement.
Is that same technique is available for contact transfer with custom fields to ECC using ESOA.
Thanks in advance

NEW GL - Create custom fields

Hi coleagues,
I am trying to create custom fields in ECC 6.0 NEW GL.
Does anybody have the steps to follow?
I did what it was expected but system now runs into an error when accessing to SQL...
Thanks

Dear "flo_1107",
Can you please describe me, how did you add custom fields from table DFKKOP to transactions FPE1/2/3 under ADDITIONAL DATA.
I checked and tried it via SPRO - below path, but without success.
Thank you very much for help

How to generate a trigger in the CIF on ECC custom field ?

Hi
We have an intercompany scenario in ECC where we use a custom transaction to convert the stock transfer order into a sales order (at the source plant).
As the 2 objects are not technically linked in ECC, we modified the CIF in order to delete the stock transfer during the transfer for the Source location in APO, so we only see the sales order at this location and not anymore the STO.
However this custom transaction is not modifying any standard field in the stock transfer at the point of conversion, therefore there is no trigger to APO generated.
Do you know an easy way to generate this trigger ? we tried with the bapi po_change to modify some standard fields, but no field is really secured to play with. We'd rather prefer to generate a trigger out of a custom field.
Thanks in advance,
Fanny

Hi Fanny ,
Here is a thought .
You want to delete the sto in APO because you dont want the demand to double dip. That is after you have converted the sto to a sales order using your custom program , unless you delete the sto your demand will show up both in so and sto which is necessarily a duplication of demand.
But there is no need to delete the sto for that. You can make the demand element of the sto as not relevant to pegging . After converting your sto to so , if you mark the demand of the sto as non relevant to pegging then , sto demand will not be accounted for when calculating the stock availability and the demand element will not be displayed in the planning book also. So the only impact in this case will be that the order will be visible in the receipts view though it will not affect the stock . I think this will serve your purpose. Just give it a thought.
But if you decide to follow this approach, you have to put in custom code to pick the relevant sto's and mark them as non- relevant to pegging. Also you have to configure the ATP category corresponding to the sto to pick the confirmed quantity and display the same in the planning book . Otherwise the sto demand will show up in the planning book.
Thanks
Saradha

Add ECC Custom Fields in CRM Web UI ERP Order item

hi all,
i have to Add ECC Custom Fields in CRM Web UI ERP Order item .
I have :
- add the field on Web UI Screen.
- add the field on structure TDS_item_COMV and TDS_item_COMC in ecc
- insert record for field on LORD_MAPPING table
- implemented badi BADI_LORD_DO_PA BADI_LORD_GET_INPUT_MODE.
- implemented method GET_I_S_STRUCT on crm with :
CASE COMPONENT.
    WHEN 'ZZSPOND'.
      RV_DISABLED = ABAP_False.
endcase.
- on method do_prepare_output i have change value of fields with code :
lr_loop = typed_context->erpadmini->collection_wrapper->get_first( ).
WHILE lr_loop IS BOUND.
posnr = lr_loop->get_property_as_string( iv_attr_name = 'POSNR' ).
Does the current item has to be set for "Sponda Idraulica"?
READ TABLE Z5CL_GSA_TOOL0001=>GT_ITEMS_SPOND INTO ls_spond
                              WITH KEY posnr = posnr.
IF sy-subrc = 0.
lr_loop->set_property_as_string( iv_attr_name = 'ZZSPOND' iv_value = 'X' ).
DATA : V_X TYPE STRING.
V_X = lr_loop->get_property_as_string( iv_attr_name = 'ZZSPOND' ).
ENDIF.
lr_loop = typed_context->erpadmini->collection_wrapper->get_next( ).
ENDWHILE.
I can't change the field value because it is "not changeble" .
Can you help me ?
Thanks in advance.

Hi Celi,
I have created some fields at header level of ERP Order, and the user is available to change them, replicating the information to SAP ECC (using interface LORD II).
All sales item information is treated using RFC ERP_LORD_GET_ITEM_MULTI, available in SAP ECC.
Please check the following point:
If those structures below were expanded with your custom fields:
SAP CRM:
CRMST_L2_ITEM_COMV
CRMST_L2_ITEM_COMC
CRMTT_ADMINI_ERPIL
CRMTT_ADMINI_I_ERPIL
SAP ECC:
TDS_RFC_ITEM_COMV
TDS_RFC_ITEM_COMC
Please check if for your scenario is necessary to implement the enhancement BADI_LORD_DO_PAI method ADD_SUPPLY_LIST. The code below works for header level.
DATA: ls_supply TYPE tds_field_supply.
IF iv_object_id EQ 'HEAD'.
    IF iv_module EQ 'VBAK_BEARBEITEN'.
      ls_supply-field = 'ZZCCINS'.
      APPEND ls_supply TO ct_supply.
      ls_supply-field = 'ZZCCNUM'.
      APPEND ls_supply TO ct_supply.
      ls_supply-field = 'ZZCCNAME'.
      APPEND ls_supply TO ct_supply.
      ls_supply-field = 'ZZAUNUM'.
      APPEND ls_supply TO ct_supply.
    ENDIF.
ENDIF.
I hope it helps!
Kind Regards!

Urgent : transfer of custom fields of a sales order from ECC to CRM

Hi,
We have a sales order which will be created in CRM and replicated to ECC.
We have added some custom fields in table VBAK, which we are displaying in the sales order additional data tab B. When the user saves the sales order,we need to transfer the fields back to CRM.
We are aware of the the BADI CRM_DATAEXCHG_BADI.
Also i think we need to conisder the structure BAPIMTCS but not sure how exactly we can use it.
On the CRM side these Z fields exist in the structure BAD_BUS_TRANSN_MESSAGE-CUSTOMER_H of the method CRM_DATAEXCH_R3D_MBDOC_FILL.
Can someone guidde us on how exactly do we transfer the value from ECC VBAK-Z* to CRM value BAD_BUS_TRANSN_MESSAGE-CUSTOMER_H.

Hi Sameer,
Thanks for the document.
I tried doing the same steps recommended(in the document it was for a customer). However i dont think my values from the ECC side are being passed to the CRM side.
I created a new Z structure and passed it via BAPIMTCS, but on the CRM side when i tired retrieving my Z structure,i dont think the system found it.
There are 2 BAPITCMS structures, t_table_info and the other t_bapistruc.
Do you know which one we need to fill up?
Thanks,
Neil.

Custom fields replication in sales order from CRM to ECC

Hi Experts,
We have added a few custom fields in CRM 7.0 (Ehp1) using AET. The BDoc BUS_TRANS_MSG has been automatically extended with these custom fields.
On ECC side also, same custom fields have been added to VBAK and VBAP, using APPEND STRUCTURE. Fields were added to ADDITIONAL DATA TAB B in VA01 / VA02 transactions.
Our issue is, when a sales order is created in CRM, it is getting replicated on ECC. But, only standard fields are getting replicated. The custom fields that we have added are remaining empty on ECC side.
In CRM --> txn SMW01, we can see that the BDOC is populated with custom fields also.
What is it that we have to do to ensure that custom fields are also replicated to ECC. Do we need to maintain field mapping between CRM and ECC, for custom fields, manually. How and where do we have to maintain the mapping. Also, please let me know the BADIs / exits that need to be implemented to achieve the above functionality
Regards,
Manohar

Hi Manohar
You can map these custom fields using the badi CRM_DATAEXCHG_BADI. Please see the documentation of the badi in SE18 in your system for further details.
Regards
Gavin

Issue with custom fields mapping from CRM to ECC.

Hi all,
I have issues with replicating custom fields in a Service order. I have created new fields with EEWB and EEWC. Now the structure has been changed in ECC and CRM. But i have to map this fields to correct structures. Also i need some logic to apply.
But i have addressed in couple of threads about the custom function module as in user exit for FI generation.
But i didnt understand the concept of this custom function module. why is this been used?
Could anyone let me know with an good example on how this has to be acheived.
Points are highly awarded.
Kindly reply me.
Thanks,
Kiran...

Hi,
Here you go,
After you create custom characteristics.
1. Do Assign category.
2. Map contents.
3. Double check your master catalog has the mapped content.
4. Publish master catalog.
As per your message, you are not having any error message during import, which tells me that you are one step to close.
Cheers, Renga

BP Custom Field replication - CRM to ECC

Hello Developers,
I have added custom fields to the CRM BUT000 (Business Partner) table, using AET. Now, I need to replicate these custom fiields to ECC. We have configured, and are successfully replicating the standard BP fields from CRM to ECC. However, the new AET custom fields are not replicating.
Can you please help me by identifying BADIs, Enhancements, or User Exits where I can insert the required code in order to accomplish this custom field replication, on both the CRM and ECC sides of this replication? Is there a document that describes what is required?
We are running ECC 6.0, and CRM 7.0.
Thanks for your help!
Duane

Hi Brian,
Thanks for your help. I have resolved this, and the information that you provided was helpfutul.
I had to create a function module in ECC, modeled after the SAP provided sample FM SAMPLE_INTERFACE_DE_BALE. In addition to this, I had to configure entries in the standard SAP tables TBE24 and TBE34 (event DE_BALE), so that my new function module would be called.
Duane.

Customer Field in ECC 6.0

Similar Messages

Maybe you are looking for