Customer Group 3 field extension

Hi All,
Currently the customer group 3 field (XD02 - Sales Area Data - Extras - Additional data) accommodates only 3 characters. Our requirement is to extend the field to six characters or create a new field since the customer group seems to go beyond 999.
Appreciate any ideas put forward.
Thank you
nimeboy

Modifying KVGR3 by extending its length will impact structures where the data element is embedded. This will manifest itself as truncation of the field by standard programming, such as on screens, in IDOCs, and when copied from one document to another.
I endorse the recommendation to use the full spectrum of values available in the three-character alphanumeric field, as opposed to extension. If a six-character field is absolutely necessary, then create an append structure on KNVV for a new field and populate it via user exit.
Cheers,
Ken

Similar Messages

Using Customized group name fields in Live Office

Hello everybody,
I've created a Crystal Reports based on a BEx Query and including a costcenter hierarchy. Now I want to add this report in Excel sheet via Live Office. I did this according to the official HowTos provided by Ingo Hilgefort. Now I've following issue. When I choose the data for the selected fields in Live Office, I could manage to insert the Live Office object into my report but the display of the cost center hierarchy nodes doesn't comply with the display in Crystal Reports. There I've defined a group with a customized group name field (costcenter.medium description) Live Office seems to use only the costcenter node ID.
Crystal Report:
Marketing und Vertrieb----
63     63     63     63     0     0
Vertrieb----
54     54     54     54     0     0
Vertrieb a----
1     1     1     1     0     0
Vertrieb a----
3     3     3     3     0     0
Vertrieb a----
4     4     4     4     0     0
Vertrieb a----
2     2     2     2     0     0
Vertrieb a----
2     2     2     2     0     0
Vertrieb a----
3     3     3     3     0     0
Vertrieb a----
2     2     2     2     0     0
Marketing----
34     34     34     34     0     0
Marketing a----
3     3     3     3     0     0
Live Office:
1000H1.1000H1000.1000H1300----
63      63     63     63     0     0
1000H1.1000H1000.1000H1300.1000H1310----
54      54     54     54     0     0
1000H1.1000H1000.1000H1300.1000H1310.1000/3100-----1      1     1     1     0     0
1000H1.1000H1000.1000H1300.1000H1310.1000/3105-----3      3     3     3     0     0
1000H1.1000H1000.1000H1300.1000H1310.1000/3110-----4      4     4     4     0     0
1000H1.1000H1000.1000H1300.1000H1310.1000/3120-----2      2     2     2     0     0
1000H1.1000H1000.1000H1300.1000H1310.1000/3125-----2      2     2     2     0     0
1000H1.1000H1000.1000H1300.1000H1310.1000/3130-----3      3     3     3     0     0
1000H1.1000H1000.1000H1300.1000H1310.1000/3135-----2      2     2     2     0     0
1000H1.1000H1000.1000H1300.1000H1310.1000/3140-----34      34     34     34     0     0
1000H1.1000H1000.1000H1300.1000H1310.1000/3150-----3      3     3     3     0     0
How can I use customized group name fields in Live Office?
Thank you for helping me on my issue.
Regards,
Florian

live office uses web services to authenticate (dswsbobje) which depends on a java app server for kerberos to be enabled to login with AD. Is Infoview working with AD? This would be required. I'm not sure about your other issues.
Regards,
Tim

New field (Customer group 5) to be added to the Catalog for Pricing.

Hello friends,
For the creation of a new Condition table, I require the field, KNVV-KVGR5 i.e Customer group 5 field present in Sales area data ->Extras -> Additional data in Customer master to be added to the Catalog of allowed fields since this field does not exist anywhere.
I have already gone thru the threads available on adding New field for Pricing which has an example/detailed explanation with the Item category (PSTYVV) field.
But the field I want i.e KNVV-KVGR5, is a part of Master data, so please guide me with the steps to follow to add this field in the field catalog and hence use it for creation of a new condition table.
1) Should i add this field in KOMP (i.e item) or KOMK ( i.e Header) or KOMG?
2) Should i include it in KOMKAZ or KOMPAZ?
3) Should i create this field as data element or structure and what should be the domain used?
4) For the value flow, should i use the Item -level user-exits or Header level mentioned in other threads?
Please guide for the same urgently.

Dear Friends,
I was finally able to create a new field for Cust.grp.5 i.e ZZKVGR5 and added to Catalog to be used for Pricing.
Then i faced a peculiar issue as below:
For the business requirement, we defined a new tax condition table for determination of tax rates. For this, we are using both standard and custom fields to derive the correct tax rates in sales/billing documents like below
A859: Country/Distr. Chl/Cust.grp.5/Material (Here Customer.grp 5 was added following the SAP Note: 531835)
The field was inserted in the communication structure KOMKAZ which is included in both KOMK and KOMP.
During the document processing, the pricing analysis view shows no value in the customer grp 5 field, though it is maintained for the customer used in the sales order. The code has been written in MV45 and RV60 both as guided in SAP Note: 531835. But the values are not flowing.
Solved the above problem as below:
M posting the answer to help the community for similar issue.
Also, the new field tat i had added was Customer Grp 5 field of Customer master ->Extras->Additional field and I wanted the value to flow in the ZZKVGR5 field before the Pricing for the sales order was called.
After trying all, we have finally fetched the value from KNVV-KVGR5 and got it moved to ZZKVGR5 field through ABAP coding.
After this when i select/click on Pricing for a particular item, it gets picked up correctly and properly.
Thanks to everyone for their valuable guidance and help.
Regards to all.

Custom Group Message Won't Appear

I go to "Details" in the group message and pull down on the screen and nothing appears. Where is the custom group message field? Am I missing something?

Hello there, rygar.maximus.
The following Knowledge Base article offers up some great clarification in regards to the features of group messages and iMessages:
Send a group message with your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT5760
Name a group message
You can name group iMessage threads. While viewing a conversation, tap Details, in the upper right. Then drag down and enter the name in the Group Name field.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

X axis labels for custom group names

I have a report with one group. That group has a customized group name field, and the group name is a formula. When I display the group name in the data section of the report, it displays according to the formula.
I now need to chart two pieces of data - Primary # of Sales and Secondary # of Sales - for that group so I can compare the two # of sales. If I make a chart for the Primary # of Sales, and go to the group tab in the Chart Expert and specify "on change of Group By Value (my grouping), show the sum of the Primary # of Sales", the chart displays as desired, and I see the custom group name (formula) as the X axis label.
But if I go to the Advanced Layout on the Data tab of the Chart expert and specify the Sum of Primary # of Sales AND Sum of Secondary # of Sales in the Show Values section, the X axis label no longer shows the custom group name; it shows the group value.
Any ideas for how to get it to show the custom group name when I chart two fields of data?
Thanks in advance!

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551

Adobe InDesign CC 2014 Custom Panel Built With Extension Builder - Problem: Can't tab from one entry field to the next; Hitting tab instead hides all palettes; Is there a fix? This didn't happen in Adobe Indesign CC

Adobe InDesign CC 2014 Custom Panel Built With Extension Builder - Problem: Can't tab from one entry field to the next; Hitting tab instead hides all palettes; Is there a fix? This didn't happen in Adobe Indesign CC

This is planned to be fixed in the next release.

RFDOPR10 dynamic selection to add customer group field

Hello,
I am trying to add the customer group field in the dynamic selection
option, when running the RFDOPR10 report. I don't seem to find the
option to add the customer group field (KNVV-KDGRP). I tried looking in
the config, but was not able find this report. I also looked for any
OSS notes, but didn't find anything either.
Can anyone please tell me if this possible to do? Thanks.
Ahsan

you have to update all the following routines in program RM07MLBD which load stock
IF      BWBST = 'X'.
*   select the valuated stocks
    PERFORM                  AKTUELLE_BST_BWBST.
ELSEIF LGBST = 'X'.
*   all own stock from storage locations or batches
    IF XCHAR = ' '.
      PERFORM                AKTUELLE_BST_LGBST_MARD.
    ELSEIF XCHAR = 'X'.
      PERFORM                AKTUELLE_BST_LGBST_XCHAR.
    ENDIF.
ELSEIF   SBBST = 'X'.
*    special stocks
    CASE    SOBKZ.
      WHEN 'O'.
        PERFORM              AKTUELLE_BST_SBBST_O.
      WHEN 'V' OR 'W'.
        PERFORM              AKTUELLE_BST_SBBST_V_W.
      WHEN 'K' OR 'M'.
        PERFORM              AKTUELLE_BST_SBBST_K_M.
      WHEN 'Q'.
        PERFORM              AKTUELLE_BST_SBBST_Q.
      WHEN 'E'.
        PERFORM              AKTUELLE_BST_SBBST_E.
      WHEN OTHERS.
*       Angegebener Sonderbestand nicht vorhanden.
        MESSAGE S290.
        PERFORM              ANFORDERUNGSBILD.
    ENDCASE.
ENDIF.
But as material group is in MARA, you could fill a table from MARA using the SELECT-OPTIONS FOR MARA-MAKTL, then update the routine using a FOR ALL ENTRIES OF the result table (if not empty) (you could also use a JOIN with MARA)
Regards

Data in Customer Group Field according to the sales area

I have two sales area, i.e. 1000,10,10 (area1) and 1000,20,10. (area2) configured in the sap.
i want that when user creates a customer for area1, then he get different data in list in "customer group field" in sales area in sales tab i.e. group1, group2. and while creating customer for area2 field, user get different data in list of the same field (now group3, group4).
is that possible without ABAP??

Hi
The field customer group flows from imgsd-master data-business partners-customers-sales-define customer groups
Whatever you define here will flow as options in F4 while creating CMR
But there is no restriction of limiting certain groups according to sales areas as reqd by you in standards
It needs a development only
Regards
Raja

Pricing field - customer group

Hi, I can find the 5 customer condition groups in the 'allowed field' for pricing table. But when I create a table to include these fields, I cannot see them.
Please help on how to add these fields to a new table.. or is there an exisitng one?

Hi Deriada,
I have also seen that all 5 customer group is in "Allowed feild".
I simple go to create condition table > Press page down (Just once)> customer group was there.
Hope it helps, Please cross check and revert back.
Regards,
MT

To release the sales order credit block by Customer Group

Hi,
1. I want to release the sales order credit block based on the Customer Group.
Normally we release the credit block using the t.code VKM3.
2. When i am maintaining the credit using the FD32, under the status screen of Credit control area Tab, the field "Credit Horizon Date", when i am creating the credit limit on 17/05/08, the system will take this field by default ie 16/07/08. I have maintained as 12 months in horizon ie OVA8.
If any one could let me know, how the system is taking this date.
Regards
Ravishankar M

Hi Ravi
Sap default horizon time is 2 month,thats why systym is taking two months time,so if you want to change this as 12 month you can go to
OMO1 and select S66 then change it as month you want.
Reward if it helps you
thanks
Utpal

Error while adding custom group in Reciver Meta Model

Hi,
I have added ZTEST_CG custom group to MOBILE in RMM and saved it.
And added a custom attribute BPNUMBER where "Adim UI Display" is chacked, No Default value,Data type is CHAR, length is 10
Once I save it, it populated success message
And the status of the "Custom group" is active
Then i have tried to generate the MOBILE Meta Model
While generating It show a pop-up box "Request terminated with error(see log)"
then "Consistency Check" tab Displays in MOBILE as below
Object Name                         Status                   Descripation
ZDOERMM_R0                      Inconsistent         "Unable to activate structure ZDO"
Please help me to resolve the Issue
Lakshman Balanagu

Hi siva,
Thanks for ur fast response,
ZDOERMM_0000_S                 Receiver Meta Model - Single Valued Attributes
ZDOERMM_G1000_S                Receiver Meta Model - Single Valued Attributes
ZDOERMM_R000_S                 Receiver Meta Model - Single Valued Attributes
I have checked Consistency of above structures
while checking Consistency ZDOERMM_R000_S it show below message
but it is active.
Check table ZDOERMM_R000_S (KIRAN/18.11.09/17:55)
   Enhancement category for table missing
   Enhancement category for include or subtype missing
   Field C_R00000 in table ZDOERMM_R000_S is specified twice. Please check
   Exactly one field C_R000Y of type LANG: Select as text language
   Check on table ZDOERMM_R000_S resulted in errors
lakshman balanagu

Sales Analysis with Customer Group Name

Hi,
Just want to know whether anyone knows how to add the Customer Group Name in SAP Standard Sales Analysis Report?
I have tried to add in Sales Analysis layout designer, but the value reflected is not correct. E.g. when my customer group criteria is Retail group, but the report layout printed out is Corporate group.
In layout designer, my source type = database, table = card groups, column = group name. Thanks.
Regards,
MH

I have checked that Sales Analysis Report by Customer - Monthly and by Invoices - by Individual Display should be ok to bring the right group name based on your selection if you put the new field in the right place. (source type = database, table = card groups, column = group name)
Where do you create this field? What is your B1 version and PL?
Thanks,
Gordon

How to add customer group(KNVV-KDGRP)in the standard report?

Dear All,
My customer requirment is that Customer group (KNVV-KDGRP)wise should be run in FBL5N report AND Customer group should be shown in FBL3N report.
how to add customer group in the standard report?
thanking you,
regards,
Rupang shah

Hi,
This is what I did for FBL5N with a developer because additional fields configuration does include certain tables.
BTE1650 available for FBL5N and add a new field into one of those tables as an append structure and then use a BTE to populate the field for FBL5N.
Hope that this helps
Kind regards

Custom grouping in crystal report

I have a requirement of creating a report off BEx query (BI 7.0).
I have database field which gives around 250 rows. Now with these 250 rows I need to create a custom grouping in crystal report having 2 groups and a detail.
Some info about database field: For ex: 'A', 'B' and 'C' are 3 sample rows of the database field. I want to arrange this in such a way that.
A will form Group 1 and B will form group 2 and it is sub group of Group 1. and C is part of Group 2.
A (group 1)
B (Group 2)
C.
But when I tried it it resulted in
A (group 1)
Others
Others (group1)
B(Group 2)
C.
In this method I was successful in creating report if there were only 2 levels. But when it comes to 3rd level i am facing the problem. Any solution from experts.

Hi Raghavendra,
You can create the superset group i.e Group A in ur illustration by choosing Insert -> Group from the pull-down menus and specifying the field name in the panel.
Next, in order to create the subset group i.e Group B and Group C you need to create a formula in the Formula Workshop-Formula Editor like the below syntax:
If <db_field_name> = "<value B>"
OR <db_field_name> = "<value C>"
then "Group B"
This formula can be used as your second group by choosing Insert -> Group from the pull-down menus and specifying this formula name in the panel.
Thanks,
Amogh.

Copa derivation rule for customer group

Hi All,
I am currently facing an issue with Derivation rule and hope someone can help me on resolving this.I have created a COPA derivation rule which has field as
Source Field
company code
Plant
Target field
Distribution channel
Condition
customer group 3 = 18.
so ideally with this conbination the distribtion channel gets updated
for the sales order.
However the issue we are facing is that the rule is working for only 1st line item and not for the others. I have also kept setting as" overwrite values only if new values found"
e.g if we see the accounting doc of billing then
line item 1 customer: x
line item 2 SaLes GL: rule works fine and dist channel is updated.
line item 3 discount GL: rule does not work.
Have checked the derivation rule and it looks correct.
Can you kindly suggest solution to this.

Hi Ajay,
Thank you so much for your reply.Please note that the GL is a cost element but the category in system is 1 and not 12.However I would like understand as to why is this happening.why does the system picks up derviation rule for a Gross sales GL and not for Discount GL(Cost element).
The distribution channel gets updated for sales GL when i check the prof segment of the line item, however this is not the case with doscount GL.
I would like to understnad the implication before changing cost element category from 1 to 12 as it runs across system.
Kindly provide some more explaination.
thanks in advance.

Customer Group 3 field extension

Similar Messages

Maybe you are looking for