Customer has been assigned order block--customer inactive

Hi Friends, While creating sales order when I m putting sold to party I am getting the error
customer has been assigned order block--customer inactive.I tried using XD05 there is no tick mark and I removed entry from sales/delivery/billing block. Still I am facing same error.
Any pointers will be appreciated and rewarded.
Regards

Hi there,
When you remove the customer block in VD05, you have to come back of the order entry screen.
You have to re-enter the order again. Only then it will allow you.
This is to refresh the system after you removed the block.
Regards,
Sivanand

Similar Messages

Your information has been sent to our customer service department. We will review your case (est. time 72 hours) and take action as necessary.

''locking this thread as it is not a Firefox support issue''
Your information has been sent to our customer service department. We will review your case (est. time 72 hours) and take action as necessary.
== URL of affected sites ==
http://

Try getting help from Facebook. Those aren't Firefox support issues.

Activity 0010 has been assigned material components - Deletion not allowed

HI friends,
Even after deleting the material from the activity, the system is giving the following error message
Activity 0010 has been assigned material components - Deletion not allowed
The status of the activity is REL.
One purchase order already created for this WBS element.
The material found deleted from the activity but why it is giving the same message.
Activity 0010 has been assigned material components - Deletion not allowed
Edited by: M.Alagesan on Sep 13, 2010 1:15 PM

Is that material already consumed?
Generally when you try to delete the operation, it also deletes the dependencies of the activity, i.e., it deletes the components associated to that activity, if it is not issued to the order.
Check the details in your system.
Praveen

How do I display the playlist(s) to which my music has been assigned?

I know that I have music in my library which is not in any of my playlists. The question is, "Which songs?" I suppose I could look in the playlist I think it should be in to see if it's there, but by number 500 or so my eyes get kind of tired; and what if I put it in the wrong playlist by accident; or what if I overlooked it? I suppose I could just start from scratch too, but I hope I don't have to do that. I think it would be a lot simpler if there were a way to display the playlist to which a piece of music is assigned in the music library window. That way I could see what playlist each piece was in as well as see if there are pieces that are not in any playlist. It would even be helpful if I could just click on an individual song to see what playlist, if any, I have it in. Is there a way to do either of these things? I hope so

Using the Smart Playlist idea was a great help. It worked perfectly! Thank you very much for the suggestion. I really appreciate it. Now all of my music has been assigned to at least one Playlist. I always worry, though, that I may have accidentally dragged a song to the Playlist above or below it; or maybe I should have put it in different Playlist; or more than one Playlist. I guess I have a little OCD. Anyway, it would be nice just to be able to review all of the music information, including the playlists that are assigned, in the music list. It would be a lot easier with a lot less clicking. Thanks to your suggestion, though, I now know that all of the songs have been assigned to Playlists. Again, I appreciate your help. Thank you.

Determine all objects that a group has been assigned to

I am trying to determine all objects that a group has been assigned to. For example, I would like to know what communities and portletes a group has been assigned to.
I can retrieve the information directly from the plumtree database, however, I have not been able to determine how to accomplish this via the api.
I have tried the following
IPTObjectManager ptObjMng = ptSession.GetCommunities();
for(inti = 0; i<3;i++)
filter[i] = newObject[1];
filter[0][0] = PT_PROPIDS.PT_PROPID_USERGROUP_GROUPID;
filter[1][0] = PT_FILTEROPS.PT_FILTEROP_EQ;
filter[2][0] = 1634; //group id for my group
IPTQueryResult ptResult = ptObjMng.Query(PT_PROPIDS.PT_PROPID_ALL,-1,PT_PROPIDS.PT_PROPID_NAME,0,-1,filter);
I have verified that the group has been assigned to the community, however, this query returns no records.
How can I retrieve all communities or group that a specific group has been assigned too?
thanks in advance

This sure would be a handy feature! iTunes has it so that you can easily tell which playlists a song is in. It would be convenient for iPhoto as well.

How do I see the group that my contact has been assigned to when I view the individual contact card?

I have added my contacts to specifics groups via icloud. I want to be able to see the group my contact belongs to when I bring a contact up (either on my iphone or on icloud). How can I get the "Group" the contact has been assigned to to show on their contact?

what do you mean by game-state
PS: i asked this question and they told me to be more specific.

Select a location to which a plant has been assigned

Hi all.
We Work in SRM 5.0 Extended Scenario, ECC 6.0.
When I try to make a PO from a SC system sends me the following error: Select a location to which a plant has been assigned.
I made corrections in the organizational unit, assign default to the plant as buyers in extended attributes, but the problem persists.
Any help will be good.

Hi Raul,
Check whether in the Extended Attributes of P.Org / P.Group where the user is assigned has Locations maintained or not.
Also check for any check in the Deactivate check box.
Check in BBP_LOCMAP table using SE16 txn. whether all the plants concerned were replicated from the correct logical system or not.
Otherwise once again replicate the plants using BBP_LOCATIONS_GET_SELECTED report.
Check for the consistency of Business partner using BBP_BP_OM_INTEGRATE txn by inputting the business partner number of plant.
Please let us know after checking and modifying the above mentioned points for further help.
Hope this will help you in resolving the issue.
Award points for helpful answers.
Rgds,
Teja

How do you reassign a device to Mac OS once it has been assigned to the Windows OS using Parallels?

How do you reassign a device to Mac OS once it has been assigned to the Windows OS using Parallels? I've tried ejecting device and plugging in again. I've tried restarting Mac and shutting down Mac completely, but never get the device window to pop up to select the Mac for the device.

See:
http://download.parallels.com/desktop/v5/docs/en/Parallels_Desktop_Users_Guide/2 6819.htm
That is one topic from the guide, not the whole guide

Outbound error "No cross-system business area has been assigned to bu. area

Hi everyone,
i have idoc failed in outbound with error No cross-system business area has been assigned to business area 0001
Thanks in advance
Soufiene

Hi Fernando,
The issue is from HR , an entry for an employee was entered and suppose not it generated idoc failed.
Thanks
Soufiene
Edited by: Soufiene Tchantchane on Sep 7, 2011 10:32 PM

ERROR - Select a location to which a plant has been assigned

1 Message
Select a location to which a plant has been assigned (Item BOLT&NUT 4.6 COMM HEX HEAD BLK 10X170MM )
this is the error message I get any idea how to fix it?
Cheers
B

Hi. I presume the plants are linked correctly to the new company code in the backend, table T001K?
Also, check the entries in SRM in table BBP_LOCMAP.
Are the plants assigned to the right company codes in this table?
There is an issue if you replicate plants to SRM then change the company code assignment SRM does not get updated.
To correct BBP_LOCMAP you can use function BBP_CHANGE_ORGANIZATION.
Regards,
Dave.

No infoset has been assigned to user group

Hi Experts
I am having problem like this
No infoset has been assigned to user group/sapquery/h2 .
why its giving error like this . how do i slove this problem .
thanks
Sandya

Hi,
U might not have assigned the infoset query created to the user group...
Check in T-Codes SQ01, SQ02 and SQ03 , whether everything is properly assigned and linked to each other.
Regards
Priya

How to display which folders a photo has been assigned to

If you select a photo in an Event and want to know which folders you've previously added that photo to, can you tell? I've looked at the iPhoto shortcuts page and don't see anything there. In Address Book, if you want to know which Groups a contact has been assigned to, you highlight the Contact and press Command-Option. But that doesn't work in iPhoto.

This sure would be a handy feature! iTunes has it so that you can easily tell which playlists a song is in. It would be convenient for iPhoto as well.

Whether the trip expense report/trip request has been assigned to a wbs?

Hi Gurus,
I need the logic in determing the following:
- A trip expense report (PR05) has been assigned to a wbs. I have to determine this at header level and item level (individual receipts).
- A trip request (TRIP) has been assigned to a wbs. I have to determine this at the header level alone.
Thanks,
Sukumar.

Hi there,
I am not talking about ESS here. I am in ecc6.0. I have the costs assigned for a travel expense report in PR05 at two levels:
1) At the header level. The cost of the entire travel is assigned.
2) For each item in the travel expense report. The cost of individual items in the travel are assigned.
Let me know, if this provides clarity.
Thanks.
Sukumar.

A filter has been assigned that evaluates to an empty region.

Hi!
We have migrated our hyperion system 9 to 11 and we are having trouble with essbase. We have the two version "running" (in separated servers) and we've noticed when the user who has a filter in the essbase security and this user acess the cube from spreadsheet add-in on the version 11, he get the warning "A filter has been assigned that evaluates to an empty region. Filter is ignored. ". In the system 9 this warning this doesn't happen. I've checked the two databases and I saw they are exactly the same. Why does this warning happen just on the system 11? What does it means?
Regards,
Rafael Melo - BR

Is it 11.1.2 that you are referring to, if it is then it may be worth having a read of "Warning "1022004 A filter has been assigned that evaluates to an empty region. Filter is ignored" [ID 1300347.1]" on My Oracle support.
Sympton
In the Essbase Excel Add-In, when trying to connect to an application/database and retrieve data with a user filter definition that includes MetaRead the following warning message appears:
"Warning 1022004 A filter has been assigned that evaluates to an empty region. Filter is ignored."
Cause
The cause of this problem is unknown.
This issue has been identified as unpublished Bug 9700270 - SPURIOUS WARNING WHEN SELECTING AN APP WHEN METADATA-FILTER ANCESTORS OVERLAP
Solution
This issue has been fixed in release 11.1.2.1.
Strange how the cause of the problem is unknown yet it is fixed in 11.1.2.1, how you fix something that is unknown I will never know.
Cheers
John
http://john-goodwin.blogspot.com/

Login failed for user 'xyz'. This session has been assigned a tracing ID of 'c2d....'. Provide this tracing ID to customer support when you need assistance.

Hello,
This error show up only when my application is running under Windows Azure. Everything work perfect on Windows Server 2008/IIS 7.5 with MS SQL server 2012.
What i try to do, is to change the database of the connection string at run-time.
My code use System.Data.Entity/ Entity Framework and the line of code i use is something like this using DbContext, IDbContext: this.Database.Connection.ChangeDatabase("dev_DB");
the error also say something like this:
[InvalidOperationException: This operation requires a connection to the 'master' database. Unable to create a connection to the 'master' database because the original database connection has been opened and credentials have been removed from the connection
string. Supply an unopened connection.]
I posted a ticket also to MS Azure support maybe they can do any settings to my Azure SQL version
Thank you.

When using SQLDatabase you cannot change an open connection string, you have to open a new one to the other database. Imagine that each database has it's own independent server. SQLDatabase is database has a service, not database server has a service.
If you found this post useful, Please "Mark as Answer" or "Vote as Helpful", this will keep us motivated to help in the forums, best regards.

Customer has been assigned order block--customer inactive

Similar Messages

Maybe you are looking for