Customer Id while creating project based on Template using create_project

Hello,
I am not able to pass customer id, on a template where there is no customer id is attached. It gives message customer id required. when I pass customer id along with bill to , ship to info, it gives message duplicate values.
I will appreciate if you clarify if I can pass customer id to the api pa_project_pub.create_project
Appreciate your help and time.
Regards

Yes,you can pass the customer_id to create_project API by using the customer record type (apps.pa_project_pub.customer_tbl_type)
Look at that customer table type record information in standard API,we can pass the customer_id as an parameter .
Thanks,

Similar Messages

  • Can't create Project from the Template or access project template

    Dear Experts,
    We are facing a issue while trying to access the project template/create the project from project template.
    we have 4 project template in place and of these two are working perfectly fine but
    From remaining two we are not being able to create project and even templates are not accesible , whenever we are trying to access the project template system rotates a circle for some time and keeps us on the same page.
    Even when we are trying to create project from the same template, system does the same again rotates the circle for some time and keeps us on the same screen.
    And System is not throwing any error for the same (we have checked in the log as well) just not letting us in and not allowing us to create project.
    Any Help Will be Highly Appreciated.
    Regards,
    Rakesh Daiya

    Dear Experts,
    We were able to find out the issue,
    We added 3 groups to the template with "Reviewer" access with "Document Only" Type in the project template.
    When we changed the type to "Template and Document" from "Document Only" and  system started allowing us to create projects from the template.
    Can anyone please help me with one query,
    Can we add a group(which includes all the buyers) with reviewer access and with Document only type?
    Does this really be a reason behind projects are not getting created from template?
    Any help will be appreciated
    Regards,
    Rakesh Daiya

  • Error while creating Project.

    Hi All,
    While creating project, I'm getting an error as below:
         [wdgen] WARNING: Metadata of component VcOADP is not valid! ComponentUsage "//WebDynpro/Component:com.sap.xss.ser.oadp.VcOADP/ComponentUsage:FcObjectSelection", Role "UsedComponent": A minimum of 1 object(s) is required
       Generating packages/com/sap/xss/ser/oadp/wdp/IPublicFcOADPInterfaceCfg.java
         [wdgen] [Info]    Generating packages/com/sap/xss/ser/oadp/wdp/IExternalFcOADPInterfaceCfg.java
         [wdgen] [Info]    Generating packages/com/sap/xss/ser/oadp/wdp/IPrivateFcOADPInterfaceCfg.java
         [wdgen] [Info]    Generating packages/com/sap/xss/ser/oadp/FcOADPInterfaceCfg.java
         [wdgen] [Info]    Generating packages/com/sap/xss/ser/oadp/wdp/InternalFcOADPInterfaceCfg.java
         [wdgen] [Info]    Generating packages/com/sap/xss/ser/oadp/FcOADPInterfaceCfg.wdcontroller
         [wdgen] [Info]    Generating packages/com/sap/xss/ser/oadp/wdp/IMessageFcOADP.java
         [wdgen] [Error]   com.sap.xss.ser.oadp.VcOADP --> Component VcOADP: Has invalid component usage 'FcObjectSelection'
         [wdgen] [Error]   com.sap.xss.ser.oadp.VcOADP --> Component VcOADP [FcObjectSelection]: Component usage has no used component
         [wdgen] [Error]   com.sap.xss.ser.oadp.VcOADP --> Component VcOADP [FcNavigation]: Component usage has no used component
         [wdgen] [Info]    com.sap.xss.ser.oadp.DataViewSelectorView --> TransparentContainer RootUIElementContainer [Children]: Container does not contain children
         [wdgen] [Info]    com.sap.xss.ser.oadp.ColumnConfigurationView --> TextView ColumnConfigurationTextView: UIElement does not have a label
         [wdgen] [Info]    com.sap.xss.ser.oadp.DataViewView --> TransparentContainer RootUIElementContainer [Children]: Container does not contain children
         [wdgen] [Info]    com.sap.xss.ser.oadp.NavigationView --> TransparentContainer RootUIElementContainer [Children]: Container does not contain children
         [wdgen] [Info]    com.sap.xss.ser.oadp.OrgViewSelectorView --> TransparentContainer RootUIElementContainer [Children]: Container does not contain children
         [wdgen] [Info]    Catching throwable null
         [wdgen] [Info]    com.sap.webdynpro.generation.ant.GenerationAntTaskError
         [wdgen]      at com.sap.webdynpro.generation.ant.GenerationAnt.showCheckResult(GenerationAnt.java:157)
         [wdgen]      at com.sap.ide.webdynpro.generation.Generation.check(Generation.java:2047)
         [wdgen]      at com.sap.ide.webdynpro.generation.Generation.generatePersistentComponent(Generation.java:1296)
         [wdgen]      at com.sap.ide.webdynpro.generation.console.GenerationConsole.generate(GenerationConsole.java:175)
         [wdgen]      at com.sap.webdynpro.generation.ant.GenerationAnt.main(GenerationAnt.java:50)
         [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         [wdgen]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         [wdgen]      at java.lang.reflect.Method.invoke(Method.java:324)
         [wdgen]      at com.sap.webdynpro.generation.ant.WDGenAntTask.execute(WDGenAntTask.java:219)
         [wdgen]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
         [wdgen]      at org.apache.tools.ant.Task.perform(Task.java:364)
         [wdgen]      at org.apache.tools.ant.Target.execute(Target.java:341)
         [wdgen]      at org.apache.tools.ant.Target.performTasks(Target.java:369)
         [wdgen]      at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
         [wdgen]      at com.sap.tc.buildplugin.techdev.ant.util.AntRunner.run(AntRunner.java:116)
         [wdgen]      at com.sap.tc.buildplugin.DefaultAntBuildAction.execute(DefaultAntBuildAction.java:58)
         [wdgen]      at com.sap.tc.buildplugin.DefaultPlugin.handleBuildStepSequence(DefaultPlugin.java:196)
         [wdgen]      at com.sap.tc.buildplugin.DefaultPlugin.performBuild(DefaultPlugin.java:168)
         [wdgen]      at com.sap.tc.buildplugin.DefaultPluginV3Delegate$BuildRequestHandler.handle(DefaultPluginV3Delegate.java:66)
         [wdgen]      at com.sap.tc.buildplugin.DefaultPluginV3Delegate.requestV3(DefaultPluginV3Delegate.java:48)
         [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         [wdgen]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         [wdgen]      at java.lang.reflect.Method.invoke(Method.java:324)
         [wdgen]      at com.sap.tc.buildtool.v2.impl.PluginHandler2.maybeInvoke(PluginHandler2.java:347)
         [wdgen]      at com.sap.tc.buildtool.v2.impl.PluginHandler2.request(PluginHandler2.java:99)
         [wdgen]      at com.sap.tc.buildtool.v2.impl.PluginHandler2.build(PluginHandler2.java:73)
         [wdgen]      at com.sap.tc.buildtool.PluginHandler2Wrapper.execute(PluginHandler2Wrapper.java:58)
         [wdgen]      at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1723)
         [wdgen]      at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:5633)
         [wdgen]      at com.sap.ide.eclipse.component.provider.actions.dc.DcCreateProjectAction.buildDCs(DcCreateProjectAction.java:1027)
         [wdgen]      at com.sap.ide.eclipse.component.provider.actions.dc.DcCreateProjectAction$1.execute(DcCreateProjectAction.java:299)
         [wdgen]      at org.eclipse.ui.actions.WorkspaceModifyOperation$1.run(WorkspaceModifyOperation.java:71)
         [wdgen]      at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1595)
         [wdgen]      at org.eclipse.ui.actions.WorkspaceModifyOperation.run(WorkspaceModifyOperation.java:85)
         [wdgen]      at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:101)
         [wdgen] ERROR: Unknown exception during generation null (com.sap.webdynpro.generation.ant.GenerationAntTaskError)
         [wdgen] ERROR: Generation failed due to errors (5 seconds)
    Error: C:\Documents and Settings\agoel\.dtc\0\DCs\sap.com\pcui_gp\oadp\_comp\gen\default\logs\build.xml:97: [Error]   Generation failed!
         at com.sap.webdynpro.generation.ant.WDGenAntTask.execute(WDGenAntTask.java:254)
         at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
         at org.apache.tools.ant.Task.perform(Task.java:364)
         at org.apache.tools.ant.Target.execute(Target.java:341)
         at org.apache.tools.ant.Target.performTasks(Target.java:369)
         at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
         at com.sap.tc.buildplugin.techdev.ant.util.AntRunner.run(AntRunner.java:116)
         at com.sap.tc.buildplugin.DefaultAntBuildAction.execute(DefaultAntBuildAction.java:58)
         at com.sap.tc.buildplugin.DefaultPlugin.handleBuildStepSequence(DefaultPlugin.java:196)
         at com.sap.tc.buildplugin.DefaultPlugin.performBuild(DefaultPlugin.java:168)
         at com.sap.tc.buildplugin.DefaultPluginV3Delegate$BuildRequestHandler.handle(DefaultPluginV3Delegate.java:66)
         at com.sap.tc.buildplugin.DefaultPluginV3Delegate.requestV3(DefaultPluginV3Delegate.java:48)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.tc.buildtool.v2.impl.PluginHandler2.maybeInvoke(PluginHandler2.java:347)
         at com.sap.tc.buildtool.v2.impl.PluginHandler2.request(PluginHandler2.java:99)
         at com.sap.tc.buildtool.v2.impl.PluginHandler2.build(PluginHandler2.java:73)
         at com.sap.tc.buildtool.PluginHandler2Wrapper.execute(PluginHandler2Wrapper.java:58)
         at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1723)
         at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:5633)
         at com.sap.ide.eclipse.component.provider.actions.dc.DcCreateProjectAction.buildDCs(DcCreateProjectAction.java:1027)
         at com.sap.ide.eclipse.component.provider.actions.dc.DcCreateProjectAction$1.execute(DcCreateProjectAction.java:299)
         at org.eclipse.ui.actions.WorkspaceModifyOperation$1.run(WorkspaceModifyOperation.java:71)
         at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1595)
         at org.eclipse.ui.actions.WorkspaceModifyOperation.run(WorkspaceModifyOperation.java:85)
         at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:101)
    If anybody has some idea about this, please help me with the same.

    Hi Thunder Feng,
    In My case that is the same a rempote DC , kindly assist me in solving the issue ...
    im getting error as shown below
    Error Fri Feb 01 09:48:28 IST 2013 Feb 1, 2013 9:48:28 AM 
    com.sap.ide.eclipse.component.provider.actions.dcmetadata... [Thread[main,5,main]] Error: No team provider found for the project.

  • Issue while creating connection pool in weblogic using SERVICE NAME

    Found two issues while creating connection pool in weblogic using SERVICE NAME
    1. While running apps from jdeveloper using xxx-jdbc.xml
    weblogic.common.ResourceException: Could not create pool connection. The DBMS driver exception was: Io exception: The Network Adapter could not establish the connection
         at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:253)
         at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1109)
         at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1033)
         at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:214)
         at weblogic.jdbc.common.internal.ConnectionPool.doStart(ConnectionPool.java:1051)
    2. Configuriing the jndi in Weblogic server
    weblogic.common.ResourceException: Could not create pool connection. The DBMS driver exception was: Listener refused the connection with the following error:
    ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
    The Connection descriptor used by the client was:
    localhost:1521:SERVICENAME
         at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:253)
         at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1109)
         at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1033)
    Problem
    database url is generated based on SID
    eg: jdbc:oracle:thin:@localhost:1521:SID
    Solution
    (generate seperate url for SERVICE NAME)
    jdbc:oracle:thin:@localhost:1521/SERVICENAME
    ------------------------

    It is so clear: host not found error for network connection and the other SID servcie name not found means your oracle instance name is not up. check with srvctl status for given servcie name or node, else check CRS_Stat -t if you are using RAC.

  • HT2534 i am not getting "none" option while creating an apple id without using credit card.

    i am not getting "none" option while creating an apple id without using credit card.

    To get the none option, sign out of anything apple you're signed into. Go to the app store and try to download a free app, any free app. Instead of signing in, take the option to to make a new apple ID. Then go through the steps to make the ID and you'll see the 'none' option.

  • While creating Projects Using the API, get two errors: 'Customer name must be passed' and 'class category is invalid'

    Hi
    While trying to Create Projects using the API, I'm getting two types of errors -
    The first is : 'API failed in one stage 1 Customer Name is a mandatory Quick Entry field. Value must be passed'
    The second is : '
    'API failed in one stage 1 Project: '<Project_Number>'
    The class category is invalid.'
    Both the messages are produced by our custom program. .. however I am not able to understand why the underlying errors occur.
    The first error ( Customer Name is a mandatory quick entry field), is caused by Projects that are to be created from Project templates where it is configured with Quick Entry Customer Name required. We are passing Customer Site number ( Party Bill to site number and Party Ship to side number). The site numbers being passed are also set as 'Primary'. Yet they are failing.
    For the second Error ( The Class Category is invalid), I rechecked multiple times, the Class categories for the Projects I am trying to create, with the Config in R12 and they are fine. Can't understand the reason for these two issues. Has anyone encountered such an issue ? If so how was it resolved?
    Regards
    Vivek

    HI All
    I resolved both the issues. In case there are others facing similar issues, following was the cause and resolution of my errors
    1. Error 1: Customer Name is a Mandatory Quick Entry field. Value must be passed.
    The cause was that the data loaded into our custom staging table was not in the right fields. This was because the data file values and the CTL were not in sync.
    Resolution:
    Corrected the data file to be in Sync with the structure defined in the CTL and  this loaded it successfully
    2. Error 2: The class category is invalid.
    The cause of this error was that  in the  Projects Template (used to create the project from), the Quick Entry setup had a Class Category set as required and I was not passing a value ( a class code value) for that Class Category.
    Hope this helps somebody else
    Cheers
    Turnbill

  • Error while creating subsite from site template

    Hi,
    I am getting below error while creating subsite from existing site template .
    Sachin Bhosale

    There must be a duplicate Email field created in any list/library. The cause can be identified by renaming the site template to sitename.cab > extact the cab file > open the manifest file search for email and see where it is associated. Refer
    to the following blog post for more information
    http://sharepointserved.blogspot.com/2012/11/a-duplicate-name-was-found.html
    http://sharepoint.stackexchange.com/questions/11944/error-when-creating-a-site-from-custom-template-a-duplicate-field-name-name
    Cheers,

  • Error while creating projects in SAP-PS from cProjects

    Hi,
    Need suggestion on creating projects in SAP-PS from cProjects. There is cProjects & SAP-PS interface.The requirment is to create project in SAP-PS from cProjects. All the configuration has done in cProjects & PS module also. While saving the projects & checking the accouting the following error & project is n't creating.
    1.Combination company / CO area is invalid Message no. KO124
    2.Acct assignment determination is not poss.in the account assgnmnt manager
    Message no. IAOM220
    3.Only one error message is transferred from the log to the cockpit
    Message no. IAOM_CPROJECTS029
    I would like to request all to suggest in fixing the issue.
    Thank you for your coopearation.
    Regards,
    Ranjan

    Hi Ranjan,
    If the companay code does not belong to the Co area,  the system will certainly raise an error message. The question is, where do the values come from.
    Woud you please check the customizing in ERP system, if you can find the inconsistence:
    1. Customizing of the Proj.Profile under 'Create Project Profile' , SAP standard delivered is CPR0001, may be replaced by customer,
    Which Co-area & company code are used. In Tab 'organization'
    2. Which responsible Org.unit is maitained at involved cProject, to which co-area or company codes is this org.unit assigned.
    3. If the Badi under the
    Integration with Other mySAP.com Components ->
    Collaboration Projects -> Controlling ->  Business Add-Ins (BAdIs),
    which set the org. information hardly via Badi method.
    Kind regards,
    Zhenbo

  • Unable to find Par file while creating iview in the template

    Hi All,
    Iam trying to change the Masthead iview, i deployed in NWDS and successfull. but while creating iView in the portal i could find the par file in the template.
    And when iam creating sample Portal application it is visible in template.
    Setting in the NWDS are correct. Can any one suggest what is happening here.
    Regards
    DV

    Hi DV,
    don't try to create an iView from template, but one from par. In the list you'll find your project name and within the project - voila: your portal application.
    HTH,
    Carsten

  • Error while creating a Development plan template

    Hi Gurus,
    I am facing errors  while creating Development Plan Template.
    This is how it goes :
    When i click on Define Forms for Talent Assessment --> a wizard pops up & i select Development Plan :
    In first step, I am giving Title,Integration with SAP Learning Solution (check) & a rating scale.
    Now after clicking next, I am adding 2 development areas :
    1) Training
    2) Mentoring,
    now as soon as I'm clicking on End Configuration, It displays 2 errors & 1 warning message :
    error1 : Element Appraisal Template 'XXXXX' contains errors.Cannot change status.
    error2 : Value type 000000XXX of value class Q does not exists
    Warning 1 : You have maintained a description that is not displayed.
    In PHAP_CATALOG, when I'm trying to manually release the Criterion Group (VB) or Appraisal template (VA), it does not allow me to do it.
    Kindly let me know how to proceed further.
    Regards
    bharti

    Hi,
    Even though it gives the error,the new RTF template is uploaded and it is reflected when I query the template again.
    But when I run the Concurent program and see the output,the output still shows me the old template.
    Regards
    Jujaar

  • Lock at a Customer level - while creating a dispute or working on the ColWL

    Please, provide workarounds for:
    SAP creates a lock at a Customer level while doing the following activities
    u2022     Clearing an item
    u2022     Creation of a Dispute case
    u2022     Working on Collections worklist for a particular customer
    As a result of the lock at the customer level, no other user can work on the same customer at the same time.
    Many thanks,
    Mario.

    Hi Mario,
    This is how system is supposed to work, so that only one user can work at a time on a particular customer. Without such a control, things could go wrong. Eg. You might be making a payment to the customer invoice, simulataneously other user could be trying to clear the same invoice using some credit memo.
    So there is not workaround.
    Thanks
    Krishna

  • Getting Error while creating Project through API:PA_PROJECT_PUB.CREATE_PROJ

    Hi Gurus,
    I'm getting an error while creating a New project.
    My code looks like this:
    APPS.PA_PROJECT_PUB.CREATE_PROJECT
    (p_api_version_number => l_object_version_number --IN Parameter
    ,p_commit => l_commit --IN Parameter
    ,p_init_msg_list => l_init_msg_list --IN Parameter
    ,p_msg_count => l_msg_count --OUT Parameter
    ,p_msg_data => l_msg_data --OUT Parameter
    ,p_return_status => l_return_status --OUT Parameter
    ,p_workflow_started => l_workflow_started --OUT Parameter
    ,p_pm_product_code => g_pm_product_code --IN Parameter
    ,p_op_validate_flag => l_op_validate_flag --IN Parameter
    ,p_project_in => g_project_in --IN Parameter
    ,p_project_out => g_project_out --OUT Parameter
    ,p_tasks_in => g_task_in --IN Parameter
    ,p_tasks_out => g_task_out --OUT Parameter
    The out put params are: p_msg_count => 1
    p_return_status => E
    p_workflow_started => N
    g_project_out.pa_project_id => 170000000000000000000
    g_project_out.pa_project_number => ^
    g_task_out_rec.pa_task_id => 170000000000000000000
    End process record p_proj_insert => 1
    Resetting the task count variable
    when I checked the API code I found this:
    PA_INTERFACE_UTILS_PUB.G_PROJECt_ID := null; --bug 2471668 ( not in the project context )
    PA_PM_FUNCTION_SECURITY_PUB.check_function_security
    (p_api_version_number => p_api_version_number,
    p_responsibility_id => l_resp_id,
    p_function_name => 'PA_PM_CREATE_PROJECT',
    p_msg_count => l_msg_count,
    p_msg_data => l_msg_data,
    p_return_status => l_return_status,
    p_function_allowed => l_function_allowed
    . I think I am getting the error because of this.
    Now, question.
    Do I need to run the Create Project from a specific Responsibility?
    because when I ran the underlined query, I fpound the final status as 'N'.
    I'm a HR guy and PA is a new world for me. Any help will be appreciated.
    Thanks!!
    Viky

    You need to find any responsibility and userid that lets you create a project using the screen.
    And then in your code, you need to set your context to that resp/userid.
    Hope this helps
    Sandeep Gandhi

  • Error while creating project automatically from cProjects

    Hi,
    Need suggestion on creating projects in SAP-PS from cProjects. There is cProjects & SAP-PS interface.The requirment is to create project in SAP-PS from cProjects. All the configuration has done in cProjects & PS module also. While saving the projects & checking the accouting the following error & project is n't creating.
    1.Combination company / CO area is invalid Message no. KO124
    2.Acct assignment determination is not poss.in the account assgnmnt manager
    Message no. IAOM220
    3.Only one error message is transferred from the log to the cockpit
    Message no. IAOM_CPROJECTS029
    I would like to request all to suggest in fixing the issue.
    Thank you for your coopearation.
    Regards,
    Ranjan

    Hi,
    The neccesary configuration for cProjects & SAP-PS interface are as follows.
    1. Project Types in cProjects, Object types, Organisation unit with Org structure in line with project profile
    2. Activate Accounting integration
    3. Object types for object link (WBSE in this case)
    4. Accounting integration using cost collector
    5. Easy cost planing settings both in R/3 systems & cProjects
    6. Project profile configuration in R/3 (cProjects standard)
    7. CO Scenario maintainance view determination (Multi level controlling-Project role, automatic)
    All the enterprise structure assignments should be same in cProjects & R/3.
    Hope this may help you.
    Regards,
    Rakesh Pradhan

  • Error While Creating Project From Active Workspace.

    Hi Friends,
    While I am trying to create Project (WebDynpro DC) from my Active Workspace.
    I am getting few errors..They are as follows.
    1> .classpath (read only exception) --- By mistakenly .classpath was added to one of my activity and it is in DTR. So kindly suggest me a solution to Delete this file.
    2> Resource ProjectProperties.wdproperties is not in sync with latest version.
    To delete resource:
    - check-in changes and then delete.
    - revert resource and then delete.
    Kindly suggest me some solutions.
    Thanks and Regards.
    Yajush Mishra

    Hi,
    The neccesary configuration for cProjects & SAP-PS interface are as follows.
    1. Project Types in cProjects, Object types, Organisation unit with Org structure in line with project profile
    2. Activate Accounting integration
    3. Object types for object link (WBSE in this case)
    4. Accounting integration using cost collector
    5. Easy cost planing settings both in R/3 systems & cProjects
    6. Project profile configuration in R/3 (cProjects standard)
    7. CO Scenario maintainance view determination (Multi level controlling-Project role, automatic)
    All the enterprise structure assignments should be same in cProjects & R/3.
    Hope this may help you.
    Regards,
    Rakesh Pradhan

  • Error while creating project through import.wdl

    Hi
    We are having issues creating project using the import.wdl.
    We are able to create content administration and merchandising projects though.
    We are getting the following error while creating a programatic import project through import.wdl
    [12/8/13 23:26:27:259 CST] 00000021 SystemErr     R atg.workflow.WorkflowException: The inner project was not created. Check that your project workflow has been initialized by the workflow engine.
    [12/8/13 23:26:27:260 CST] 00000021 SystemErr     R  at atg.epub.project.ProcessHomeMethods.initializeProcess(ProcessHomeMethods.java:450)
    [12/8/13 23:26:27:260 CST] 00000021 SystemErr     R  at atg.epub.project._ProcessHome_Impl.initializeProcess(_ProcessHome_Impl.java:53)
    [12/8/13 23:26:27:260 CST] 00000021 SystemErr     R  at atg.epub.project._ProcessHome_ReposImpl.initializeProcess(_ProcessHome_ReposImpl.java:3)
    [12/8/13 23:26:27:260 CST] 00000021 SystemErr     R  at atg.epub.servlet.CreateProcessFormHandler.handleCreateProcess(CreateProcessFormHandler.java:380)
    We have checked all the workflow manager settings. The workflowProcessManager.xml is properly pointing to the system name and drp port.
    We had delete entries from
    epub_wf_server_id
    epub_coll_workflow
    epub_workflow_info
    dss_server_id
    dsi_server_id
    upon enabling the logdebugs of WorkFlowProcesManager, we are seeing the following debugs.
    [12/8/13 23:31:08:101 CST] 00000020 SystemOut     O /atg/epub/workflow/process/WorkflowProcessManager received message on port IndividualEvents message: ObjectMessage()
    [12/8/13 23:31:08:101 CST] 00000020 SystemOut     O /atg/epub/workflow/process/WorkflowProcessManager [message]: received an individual event message StartWorkflowMessage[messageId=96000003subjectId=prc272003,subjectType=process,processName=/Commerce/import.wdl,segmentName=main,user=user : admin null] of type atg.workflow.StartWorkflow
    [12/8/13 23:31:08:101 CST] 00000020 SystemOut     O /atg/epub/workflow/process/WorkflowProcessManager [message]: created individual execution context ProcessExecutionContextImpl[individual,subject=process:prc272003,messageType=atg.workflow.StartWorkflow,message=StartWorkflowMessage[messageId=96000003subjectId=prc272003,subjectType=process,processName=/Commerce/import.wdl,segmentName=main,user=user : admin null],sessionId=Tw-Yr5CQqqkADS3q8MadASz,parentSessionId=Tw-Yr5CQqqkADS3q8MadASz,request=atg.servlet.DynamoHttpServletRequest@1009990707,response=atg.servlet.DynamoHttpServletResponse@3c9e3c9e]
    [12/8/13 23:31:08:103 CST] 00000020 SystemOut     O /atg/epub/workflow/process/WorkflowProcessManager [message]: 0 individual instances found for subject process:prc272003
    [12/8/13 23:31:08:103 CST] 00000020 SystemOut     O /atg/epub/workflow/process/WorkflowProcessManager [message]: going through process segments registered for type atg.workflow.StartWorkflow for subject process:prc272003

    If you have a support contract with Orcale you can find out hoe to fix this error by checking out Knowledge Article 1038072.1 How to troubleshoot "atg.workflow.WorkflowException: The inner project was not created. Check that your project workflow has been initialized by the workflow engine."
    The article says you should:
    1.
    delete from epub_wf_server_id
    delete from epub_coll_workflow
    delete from epub_workflow_info
    restart server and retest
    2. If problem exists check that you have configured the Workflow Process Editor Server correctly.
    The problem is that probably the workflow has not been not been initialized correctly by the Workflow Editor Server.

Maybe you are looking for