Customer line items ledger view in ECC 6.0 other than FBL5N
HI
Is there any other T code for customer line items ledger view in ECC 6.0 other than FBL5N
thanks
Hi Jagadeesh,
There are some bunch of reports avaialble in SAP for customer Lines item display,
S_ALR_87012168 - Due Date Analysis for Open Items
S_ALR_87012197 - List of Customer Line Items
S_ALR_87012173 - List of Customer Open Items for Printing
S_ALR_87012174 - List of Customer Open Items
S_ALR_87012175 - Open Items - Customer Due Date Forecast
S_ALR_87012176 - Customer Evaluation with OI Sorted List
S_ALR_87012177 - Customer Payment History
S_ALR_87012178 - Customer Open Item Analysis by Balance of Overdue Items
S_ALR_87012198 - List of Cleared Customer Items for Printing
S_ALR_87012199 - List Of Down Payments Open On Key Date - Customers
Please check the above mentioned reports
Hope its useful to you
Regards
Saravanan.A
Similar Messages
-
Unable to update profit center or plant code in the customer line item
Hi,
We require the profit center and plant code and division in FI
documents (Posted through billing document or through direct FI entry)
We are unable to input plant or profit center in the customer line item
while using F-21 or any other FI transaction
The plant and profit center is not appearing even in customer line item
in RV document (From SD billing)
We have made the Field status group as optional for the reconcilation
accounts.
Regards
SembianHi
Profit center / cost center are generally entered in revenue & expense line items (P&L items). Customer / vendor master and line items are balance sheet items which will not show profit / cost centers.
Regards
Neeraj -
Profit centerwise Vendor and Customer line items view
Deal ALL,
We have not activated Business Area.
We have 10 plant under one company code. Client is booking the vendor and customer invoice as per the cost center and profit center of the plant. Payment and Receipt is also made according the bank maintain for each plant. As one customer or vendor is dealing with all the plants.
Can any body can help me out how to get the vendor and customer line item display according plant or cost or profit center wise, so we can make or receive payment accordingly.
Request you all to reply.
Thanks & Regards,
BhadreshHi
Try the transaction codes for Profit Display by suitable config in TCode O7F1, O7F2, O7F3
Assign Points if useful
Regards
Sanil -
How to view customer line items in S_ALR_87012197
Hi frends,
what is the selection criteria for customer line items list in S_ALR_87012197 as i am preparing the EU document for it and till now i didnot use that one.so that i dont have much idea about the icons in that screen.the concept is i need to explain them very very simple format as they want spoon feedup in the EU documents.
Regards
Sap Guru
[email protected]In that it is Posible to Open items and Cleared items
and also open and cleared items?
Parked items noted documets and standard items wht u want select that check box and excute it?
in that repost there is change variant there in that lot of options availble in sap what i want select and if u dont want optins surpress it ?
now u r clear
i think -
I want to capture data through I/O while posting to Customer Line items
Hi Experts
Can you please suggest me that while posting to Customer line items i would require to capture data through Internal Order, is this possible if yes please explain
Regards
SreenivasuluHi
Internal Order details can be updated to the P&L line item ie revenue line item in your case. From ECC 6.0 it will be available in the General Ledger view of the document.
Regards,
Lakshmanan Krishnan -
Profit Center for Vendor/Customer line item in F-02
hi all,
We have implemented SAP ECC 6.
At the time of vendor line item posting, there is no input field for profit center.
Can anyone please tell the way out for Profit Center field pop up in case of t-code like f-02 for vendors & customers
AbhishekPlease note the following:
- On FBL5N and alike customer/vendor line item reports you won't find
the field profit center filled; hence you can't directly input it during document entry (as pre-mentioned)
and the profit center for customer/vendor gets inherited (as of document splitting functionality) from the document other line item(s) (according to the defined document splitting rules...)
- Yet you can use the below reports (with New G/L.) to get the customer/vendor line items wise reporting over a profit center (i.e. unlike FBL5N & showing the inherited customer/vendor profit center in the G/L. view)
S_AC0_52000887 - Line Items->Open Items->Receivables: Profit Center
S_AC0_52000888- Line Items->Open Items->Payables: Profit Center
In both reports you can use:
"Custom Selections" -Dynamic Selections Icon- enabling you to filter the output according to
a. Customer line items specific data entered within the posted document(s)
b. General ledger items of the G/L. view of the posted document(s)
& the "Output type" includes like most of the New G/L. Reports:
- Graphical report output
- Classical drill-down report
- Object list (more than one lead column) -
Profit Centre updation in Vendor or Customer Line item
Dear All,
With the concept of New GL, system is configured with profit centre and business area mandatory fields. after posting the document in MIRO and VF01 system is not able to capture the Profit Centre in the vendor or customer line item in " Entry View" where as in "General Ledger Veiw" PC is capturing properly.
Business area field is updating in the both the veiws.
Due to this we could not able to take the vendor or customer line item in the t code FBL1n / 3n. is there config setting missig or else system is behavior correct.
if sytem is behaving correct in this case how to take the vendor or customer line item with respective profit centre wise.
Thanks in Advance,
Sahil. KFirst of all go to SE37 and copy the function module SAMPLE_INTERFACE_00001650 and make a Z one out of it .
Then code your requirement playing aorund with the structure RFPOS .
Then Go to FIBF - Settings - Products - Of a customer . Here make a new entry with a Z one of yours as per your convinience .
Again go to settings - P/S modules - Of customer - Entere here the BTE 1650 and the product that you have created and enter the fucntion module name that you have made the codings in .
Save the entries .
Also , in the FM you can keep a break point and check what is the effect that is coming out in the Structure RFPOS after the FM is executed .
May take the help of an ABAPER for the same . -
Customer line item report with GL account display
Hi
Please guide some customer reports for the following
Client need a Customer Line item reports with Customer number and repective gl account for each line items.
for ex: Product A/c xxxxxx
To Sales A/c xxxxxx(recon A/c)
Thanks in advanceHi
1.FBL5N - Customer Line item Display (Customer Line item reports with Customer number )
2.FBL1N - Vendor Line item Display
3.FBL3N - General Ledger Line item Display
The sales entry will be
DR Customer - to view this entry FBL5N
CR Sales - to view this entry FBL3N
Hope this will be usefull -
S_ALR_87012197 - List of Customer Line Items
Hello!
There is in 4.6C report 'S_ALR_87012197 - List of Customer Line Items' selection field called 'Search help ID'. In that field's dropdown list, there is a selection option 'Customers by bank account number' available. This same selection option is not any more available in SAP ECC 6.0 corresponding report whether they use same program RFDEPL00.
Do anyone know from where that selection option could be enabled also in SAP ECC 6.0? Bank account number is to be taken from view M_DEBI2 to report S_ALR_87012197 in 4.6C, but that view is not active as default in 6.0.Here's how we resolved this.
1. Create the view ZZM_DEBI2 in ED1 .. In old release M_DEBI2 was available.
2. Create the elementary search help ZDEBI2.. SE11
3. Add to the search help DEBI
SE63 to translate to necessary languages. -
Customer line items ...dispute case
Friends,
when i go into the customer line item report (FBL5N) and click on a record it opens up a page where we see a button for 'Dispute Case'and i went there and changed the reason for case and saved it and came back to the fbl5n customer line item screen and checked the record against which i changed the reason for case, but it didnt changed the reasion on the record but when i go into the record and try to view it in additional details it shows me the one i have made changes. not able to understand why it is not showing in the list of line items when it is showing inside the record details that it has been changed,even i did refreshed it . Our end user wants to see the changed reason code on the line items page wich is on the AR side when we change the reason for case on the dispute side.
its kind of urgent please put some light onto it, any help would be highly appreciable...
Thanks
Jaysounds like changing the ALE from system 1 to the other system.
However I doubt it will be that easy.
I believe that could should contact SAP SLO to work out the best route for data migration. -
Profit Center population in the Vendor and Customer Line items
hello
our client is asking for getting profit center in the vendor and customer line items where in the view FBL5n and fbl1n we are not getting the profit center populated - in the new gl i understand that there is a standard report based on the gl account.
but our business is not satisfied with the report and expecting report at profit center level.
Can any one suggest any way of doing this.
regards,
VijayDear Vijay,
Let me provide you my view of solutioning for this. This is an enahcement that needs to be done
1. You can get the profit center from the given vendor and customer line item at the time of posting, using an enahcement you will be able to capture it.
2. Existing the profit center field is not populated in the BSIK,BSAK,BSID and BSAD tables
3. Hence, in the same enhancement once you capture the profit center , you can write the code that profit center is updated in these tables also.
4. This will help you to do the vendor line item wise selection in the FBL1N, FBL5N profit center wise.
Constraints of this solution:
The only constraint remains where in the for a given document if there are multiple profit center, then the system will do the splitting profit center wise for a vendor line item, which will not populate the profit center in those tables as there is only one field available in the bsid etc.. tables.
This basically would be the one the soltuion where in as seeen from the end user ther eis no change in the front end interface , the way they are doing always they can do.
You need to also take care the % of document splitting means cross profit center postings /cross document splitting charactericstics postings and the volume involved in this. so that you can suggest this to your client.
Regards,
Bharathi. -
Runtime error - FBL1N - vendor balance with customer line item
Hi gurus,
One scenario where i have assign vendor as customer & customer as vendor in vendor & customer data. also make tick mark for both clearing with vendor & customer.
when i see the customer report with vendor item it shows me the customer & vendor dues but when i tried to see the vendor balance with customer line item it gives dump error.
Runtime Errors PERFORM_NOT_FOUND
Exception CX_SY_DYN_CALL_ILLEGAL_FORM
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FORM', was
not caught in
procedure "%_LDB_CALLBACK" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The program "RSDBRUNT" is meant to execute an external PERFORM,
namely the routine "CB_DDF_GET_KNA1 " of the program "RFITEMAP ", but
this routine does not exist.
This may be due to any of the following reasons:
1. One of the programs "RSDBRUNT" or "RFITEMAP " is currently being developed.
The name "CB_DDF_GET_KNA1 " of the called routine may be incorrect, or
the routine "CB_DDF_GET_KNA1 " is not yet implemented in the program "RFITEMAP
2. If the program SAPMSSY1 is involved in the runtime error, one of
the function modules called via RFC is not flagged as remote-capable.
(see Transaction SE37 Goto -> Administration -> RFC flag)
3. There is an inconsistency in the system. The versions of the
programs "RSDBRUNT" and "RFITEMAP " do not match.
Warm regards,
Dhananjay R.Hi martin
still problem was not solved. actually i am working on ECC 6.0 & not required to implement the sap note on development. i had done the configuration in vendor master & customer master for clearing.
please suggest me.....what to do ?
Than'x
Dhananjay R -
Profit centre needs to be updated in Vendor and Customer line item reports
We are using ECC 6.
Profit centre is updating for vendor and customer line items in document level. But the same is to be reflected/updated in profit centre field in FBL1N and Reports.hi
Use this T codes you will get Profit center wise S_AC0_52000888 Paybles (vendor balances )
Tcode for Profit center wise receviables S_AC0_52000887 (customer balances )
Regards
Babu.k -
Business Area wise Vendor & Customer Line item report
Hi
We are on SAP ECC 6. Can I get Business Area wise Vendor & Customer Line item report (as like FBL1N)
Regards
DebojyotiHi,
In FBL1N in dynamic selections you can give the business area as the selection parameter otherwise after execution of report with the help of layout you can set filters for business area.
Go to FAGLB03 give the vendor or customer reconciliation account along with business area. So after you execute the report you can choose vendor code and business area.
Check once it may help you
Regards,
Sankar -
Profit Center wise Vendor & Customer Line item report
Hi
We are on SAP ECC 6. Can I get Profit Center wise Vendor & Customer Line item report (as like FBL1N)
Regards
SandeepHi,
Please Try using "S_ALR_87013343 - Profit Center: Receivables " and "S_ALR_87013344 - Profit Center: Payables"
Reports
Best Regards,
Ravi Reddy
Maybe you are looking for
-
I just want to sync music on my new iPhone but it isnt be recognized on iTunes. Please help.
-
CS4: Setting combo box properties for interactive prototype
Hi I'm doing an interaction design for a web application in Fireworks CS4 and can't figure out how to make a dropdown list (e.g. combo box) work properly. I'm using the Common Library > Win > ComboBox symbol but I can't see how to specify the options
-
Have a MAC PRO 2x2.8ghz quad core xeon, 2GB memory and want to upgrade my ATI Radeon ATI HD2600. Don't need a high end card just something better. In previous PC life preferred NVIDIA but not a necessity. The 8800 may be too high end, as would the ne
-
Testing in ?? Browsers...
I've been testing my web pages in Firefox 3 and IE 5.2 browsers, assuming that if it works with these two - It'll probably work on nearly everything. Some of the apps I'm using have problems with IE 5.2. A trusted advisor tells me that hardly anyone
-
Photoshop Elements Editor Function Won't Work
After upgrading to Windows 7, the Editior function on my Photoshop Elements 6 program stopped working. I have tried the following: Run as Administrator. No success. Compatibility Troubleshoot. No success. Reinstalling. No Success. Anyone have any sug