Customer listing with address data and credit limits

Hello all,
I need a report I can download to Excel detailing address data and credit limits by customer.
Many thanks.

Hi
You can not get the report with address details from standard reports. You have to download the address from table level to excel and you can do what ever you want. If you want a special report what you want you have to contact your programmer (ABAP).

Similar Messages

The verification lists my card data and address etc. correctly but I need to keep entering the card security number. Support keep telling me to delete and re-enter my car info which does not help. Anyone else seen this issue? Seems to be something to do

The verification lists my card data and address etc. correctly but I need to keep entering the card security number.
Support keep telling me to delete and re-enter my car info which does not help. Anyone else seen this issue?
Seems to be something to do with a new security check they have put in the system that does not work correctly and support is totally incapable of helping me out.
wth am i gonna do im feed up and on top i have no one to help me been calling itunes for days now im ****** off to the maxxx

I've been jumping through the hoops with Apple Support on this issue....first time I called they said I should try updating from IOS 4.0 to 4.1....tried that and the issue still persisted...then I called back to update the ticket and get the next steps...they said that the Bank is rejecting the request for verification and that is why it keeps prompting (which doesn't make sense since the confirmation seems to go through successfully). The rep also contacted the iTunes dept and had them run the verify manually and said the bank rejected it. The next hoop they want me to jump through is calling the bank to verify that the account is in good standing and inquire about the rejected requests. I'm fairly certain the bank account is in good standing....will verify of course....but I find it hard to believe that all the people who have posted here, plus countless others that are experiencing the same issue but haven't, are ALL having banking issues in the last 24hrs...I'm more convinced there is a disconnect on the back end between iTunes and Financial institutions...
I'm not sure I buy in to everything I was told...he also told me he has had several calls on this issue and they were all told to check with their banks. He could not verify that any of his past calls were resolved. Needless to say I'm not 100% believing everything he told me....weak response from Apple support on this issue so far.

When I send messages off-line, they enter in the addressed mailbox with the date and hour which I've clicked "Send later". How could I set up to the real time?

When I send messages off-line, they enter in the addressed mailbox with the date and hour which I've clicked “Send later”. How could I set up to the real time?

What you say about Send Later timestamp is correct.
When you click Send or Send Later a time is set regardless of when you actually sent the Send Later email.
Please voice your vote at this link:
https://bugzilla.mozilla.org/show_bug.cgi?id=560901
You will need to logon/register.

I have a sharepoint custom list with Title and image attachments, now i want to display image attachments in div based on the title.

hi,
i have a sharepoint custom list with Title and image attachments, now i want to display image attachments in div based on the title.

i am using the below code only
SPSite mySite = new SPSite("http://sharepoinsiteaddress");
SPWeb myweb = mySite.OpenWeb();
SPList myList = myweb.Lists["Announcements"];
SPListItem myListItem = myList.GetItemById(1);   foreach (String attachmentname in myListItem.Attachments)
String attachmentAbsoluteURL = myListItem.Attachments.UrlPrefix // gets the containing directory URL
+ attachmentname;
   // To get the SPSile reference to the attachment just use this code
  SPFile attachmentFile = myweb.GetFile(attachmentAbsoluteURL);
   // To read the file content simply use this code
   Stream stream = attachmentFile.OpenBinaryStream();    StreamReader reader = new StreamReader(stream);
   String fileContent = reader.ReadToEnd();
here i am using panel, how can i attach this attached image to panel

Attendee List with Personnel area and position

Hi
Is there any report which gives the attendee list with personnel area and position. Tried to get it through adhoc query with set operationss. But the booked date is missing.
Thanks
Sreeja

You can change what is displayed using the layout once you have run the report. This is from the report documentation:
"You select the data you want displayed under Change layout.
When you choose this function, a dialog box appears with the columns that are displayed on the list screen in the left table, and the hidden columns in the right table.
The arrows let you determine what columns are displayed. To transfer the changed layout, choose Transfer.
To save the layout, choose Save layout. You can call this layout as required by choosing Choose layout."
We don't actually maintain attendees in our system, so I can't run the report. But hopefully if you change the layout you can get the additional fields that you want.
- April

Upload address data and ship to party

Hello Freindz
I want to upload address data and ship to party for the customer. How could I do these two task together.
I have found BAPI to upload address data BAPI_BUPA_ADDRESS_ADD but I wish to upload both address data and ship to party data together. Is there any function module available or what can be the way to do this.
Regards
Manisha.

Hi Manisha
Does the ship-to-party already exist in the system?
Anyways, there is no function module which performs all tasks at once. So you'd have to make on, which is not really complicated (simplyfied code):
FUNCTION add_address_and_ship_to.
CALL FUNCTION 'BAPI_BUPA_ADDRESS_ADD'.
if required...
CALL FUNCTION 'BAPI_BUPA_CREATE_FROM_DATA'.
and finally assign ship-to party
CALL FUNCTION 'BAPI_BUPR_RELATIONSHIP_CREATE'.
ENDFUNCTION.

Unable to Archive Customer only with General Data

Hi,
I am trying to archive the Customer master only with General Data. I followed the below steps.
1.Execute SAPF047 - To establish the link b/w customer and vendor
2.Tran: XD99 , Set the del flag and confirm the same in xd03
3.Tran: F56A , Select FI_ACCRECV object and perform the following
   1. Preproc => Preprocess resulted that no data found in this category
   2.Write => Preprocess resulted that no data found in this category
   3.Delete => No data found
Note : I selected "General Master Records" and also tried with "SD Data" and "FI Data".
All resulted the same. Any Hints on this ?
Regards
Prasath

Hi Prasath,
Please follow the following steps...
1)Go to Transaction <SARA> and give the object name FI_ACCRECV and press ENTER
2)Go to Customizing -> Application-Specific Customizing->Mark customer for deletion (centr.) and mark the customers for deletion(This screen can alternatively be reached using transaction XD06).
3)Schedule the Write variant and execute the jobs
               Data To Be Archived ---> General Data
               Customer -
> Give Customer No to be archived
               Consider Del Indic----
> Checked (If you are not doing step2, this can be unchecked)
               Processing option----
> Select Production mode
4)Select Delete in SARA and run the delete jobs for the data which has been archived in step 3.
I dont see a preprocessing program available for the archiving object FI_ACCRECV. If you have that option available then it should automatically set the deletion indicator when u run the program , ie in that case step 2 can be avoided)
Hope this input helps you.
Regards
Asish

Equipment master data print out with general data and characterstics

Hi,
I need to take print out of equipment masters with general data and characterstics for around 300 masters at a time. Could any
body sugget me the best way to take print out
Regards,
Srinivas Kasina

I think I have not asked my query properly.
For Maintenance Order, each order print out will be taken separately as a print out by using some template. Do you want the equipment master print out in that manner?
Else you want the details of general tab & characteristics tab as columns like equipment list report?
I hope my question is clear now.

There is something wrong with the volumes buttons in my macbook pro, every time i pressed the one who raises the volume, it leads me to the screen where (i do not no what its called) the background is black with the date and time and a calculator.

There is something wrong with the volumes buttons in my macbook pro, every time i pressed the one who raises the volume, it leads me to the screen where (i do not no what its called) the background is black with the date and time and a calculator. However, when i lower it, my safari tab goes out of the screen. What do you guys think i should do? I'm getting very nervous.

hey HAbrakian!
You may want to try using the information in this article to adjust the behavior of your function keys to see if that resolves the behavior:
Mac OS X: How to change the behavior of function keys
http://support.apple.com/kb/ht3399
Take care, and thanks for visiting the Apple Support Communities.
-Braden

How do I create an unordered list with three items and link to id's

How do I create an ordered list with three items and linl to id's on my page

Thanks, I guess what I was really asking, Is there a n option in the insert menu or somewhere where Dreamweaver does it for you.
I am not clear on what you are wanting DW to do for you? Is it that you want it to insert a three item unordered list? No - there's no such function. You would need to click in Design view where you want the list to go, click on the bulleted list icon on the Property inspector, and then enter the three items separated by carriage returns. Then you'd have to link each item specifically.
To enter the named anchors to element ID values, CS5 has no way to do this. You'd have to enter those links manually.

Connect to LDAP with Address Book and Mail

The admin guide for OD is pretty vague from what I've been able to figure out. How do I connect to my LDAP with Address Book and Mail? I'm sure this is a really simple setup and I'm just missing some minor detail.

Address Book > Preferences > LDAP
HTH
Martin

Regarding list with material no and material class per product

Hi All,
Could you please tell me ,Is it possible to create a list with material no. and which material class is linked to each product?
E.g. 7510555 (plant DK10 - sales org. DK01) Class type Z01 - ESTORE and SATTSTORE + class type 001 - CHEMICAL PRODUCT and DK_FD_SALG.
Can you inform me in which table I can find the information.
thanks in advanse!
With regards,
Pritee.

Try transaction CL30N, CL31, CT10, CT12.
Best Regards, Dirk

Problem with Address Book and Exchange

Hello,
I have a little problem with Address Book and Microsoft Exchange 2003. I am able to connect to Outlook Web Access via Safari without problem. I see my contacts. Unfortunately when I setup everything needed in Address Book preferences (Synchronize with Exchange) the contacts didn't show in my Address Book. Strange thing is that no error is generated. can someone please help me what I am doing wrong ? Thanks in advance.

My suggestion is that you consider using Microsoft Entourage. For Exchange users on a Mac, Entourage is by far the best option. The down side is, you need to buy Microsoft Office 2004 to get Entourage, but your employer might own a site license, in which case, Office 2004 might not cost you anything.

Procedure for creating Recording in LSMW with header data and line item

Hello Friends,
I have to do the Initial Upload of Model Service specification using LSMW ( Recording).
Transaction : ML10
The problem i am facing is that i have been given 2 files one with HEADER data and the other with LINE ITEM(Service data).
Can we use the RECORDING method to upload 2 files?
If not possible how do we proceed.
Thanks and regards
Ashish Naik.

Step-by-Step Procedure:
Details of the BAPI used in this scenario:
Business Object: BUS2012
Method: CreateFromData
Details of Message Type and Basic IDoc Type:
Message Type: PORDCR
Basic IDoc Type: PORDCR02
Letu2019s have a look at the BAPI first, before proceeding to the LSMW:
1.     Go to Transaction BAPI
2.     Click on Search Button
3.     Enter the value u201CBUS2012u201D and select u201CObj.type(Technical Object Nameu201D
4.     Press ENTER
5.     Following screen appears:
6.     On the left side of the screen, Expand the u201CPurchaseOrderu201D.
7.     Select u201CPurchaseOrderu201D and double-click on the same for details.
Building LSMW using BAPI:
1. Go to Transaction LSMW.
2. Enter the Project, Subproject and Object information and click on CREATE.
3. Enter the descriptions for Project, Subproject and Object as prompted.
4. Now select Settings à IDoc Inbound Processing
5. u201CIDoc Inbound Processingu201D screen appears. Enter the required details as shown below:
6. Click on u201CActivate IDoc Inbound Processingu201D.
7. Click on u201CYesu201D when prompted for u201CActivate IDoc Inbound?u201D
8. Hit on u201CBacku201D to return to the main screen.
9. Click on Continue (F8). Following Screen appears:
10. Select the Step 1 u201CMaintain Object Attributesu201D and select u201CExecuteu201D.
11. Select the radio button u201CBusiness Object Methodu201D and enter the following details:
Business Object: BUS2012
Method: CreateFromData
Hit ENTER
12. Save and click on BACK button. Following information message is displayed.
13. Now select step 2 u201CMaintain Source Structuresu201D and click u201CExecuteu201D.
14. In this step, we need to maintain the source structure. In our example, lets consider the example of a file with 2 structures Head and Item data as shown below:
Click on Create and name the source structure as HEADERDATA. Now select HEADERDATA and click on u201CCreateu201D again to create the child structure. Following popup appears:
Select u201CLower Levelu201D and click on Continue. Enter the Item data structure name.
Click Save and hit BACK button to go to the main screen.
15. Select step 3 u201CMaintain Source Fieldsu201D and hit execute.
16. Enter the fields as shown below:
17. Click SAVE and return to main screen.
18. Select step 4 u201CMaintain Structure Relationsu201D and click Execute.
Select E1PORDCR and click on CREATE RelationShip. Following screen appears:
Select HEADERDATA and hit ENTER
Similarly do the same for the structure E1BPEKKOA, E1BPEKPOC and E1BPPEKET.
Click Save and return to main screen.
19. Select the step u201CMaintain Field Mapping and Conversion Rulesu201D and click on execute. Maintain the Field Mapping as seen below:
20. Select step 7 u201CMaintain Source Filesu201D and provide the link for the test file created. (Create a test file with the same structure as defined earlier).
Save and return to main screen.
21. Select the step u201CAssign Filesu201D and click on Execute.
Assign the file provided to the source structure. Here the same file is provided for both the structures.
Save and return to the main screen.
22. Select the step u201CRead Datau201D and click on Execute.
Click on Execute.
Return to the main screen.
23. Select the step u201CDisplay read datau201D and click on execute.
Click on the structure name to get the field level values.
24. Return to main screen and now select u201CConvert Datau201D.
25. Return to the main screen and select u201CDisplay Converted datau201D.
26. Return to main screen and select u201CStart IDoc generationu201D.
27. Now select the step u201CStart IDoc Processingu201D on the main screen.
28. Return to main screen and click on u201CCreate IDoc overviewu201D. Here the data record and status records of the IDoc could be viewed:
Check this. This may help

LR 4.4 on pc with Win7. Catalog is loading with all data and text and metadata but no images

LR 4.4 on pc with Win7. Catalog is loading with all data and text and metadata but no images and no previews.

LR 4.4 on pc with Win7. Catalog is loading with all data and text and metadata but no images and no previews.

Customer listing with address data and credit limits

Similar Messages

Maybe you are looking for