Customer Master tab page "Contact Person"
Dear All
In the custome master general Data the * contact person tab page * is not appearing, How to make it appears the tab page
contact person, since we need to add the contact person name for that customer.
Please give me the soluation, its very urgent.
Thanks in advance for your answer.
Dear Friend,
This is because of the suppressed entry in the account group creation.
Go to TC : OBD2 :
Select your account group and then go to the details in the magnifying options you will find the datails of the sales area ....
In the sales area go to bussiness partner assignment.
Radio it to optional entry......
now create customers...
reward if useful..
regards,
SAP SD
Similar Messages
-
Deleting a Contact on Customer Master with that Contact on Open Sale Orders
Our current SAP system ECC 6.0 allows a user to delete a Contact from the Customer Master where that Contact is also on Open Sales Orders.
Then when our create delivery job runs, it abends saying Contact record not found.
How is this normally handled ? Are users not suppose to delete Contacts from the Customer Master if they are attached to an Sales Order ? Is there some config to turn on in SAP that checks for Open Sales Orders before deleting a Contact in the Customer Master ? Do I code this check in User Exit on the Save in the Customer Master and not let user delete the Contact if it's attached to Open Sales orders ?
Would appreciate any help on this.
Thanks,
DavidHi David,
Try this user exit.
RFDRRANZ User exits: Accounts Receivable Information System
Regards,
Vijay -
Vendor master - General data - Contact persons - Usage to send PO output
Hello all,
Can you please guide me in using the Vendor master -General data - Contact persons for sending Purchase order output.
Using partner role 'CP' - is it possible to determine the PO message output automatically.
Thanks in advance for your support.
Thanks
SasiHi Raja
Thanks for your immediate response.
Can we use the Contact persons as partners instead of vendors and trigger the PO output through email?
What should we do for that please?
I have tested that, but the partner number(contact person number) is not getting copied to the message in PO.
it is looking for a address number instead of contact person number.
Any suggestions please
Thanks in advance for your support.
Thanks
Sasi -
Master Data Synch - Contact persons
In master data synchronization FSCM for business partner contact person do I have to setup a different bp number range or do they take the same number of the contact person assigned in the customer master?
If not is there a way we can configure the BP contact person such that it takes the same number as Customer Contact person.
Thanks-DonnyHi Vivek,
I am not able to sync ECC-Customer/Contact Person as FSCM-BP/Contact Perso.
And Contact Person doesn't appear in worklist.
Customer created/changed (with a Contact Person) is synced, but, fails when there is a Contact Person.
Seek you help.
Thanks, -
Custom new tab page, tiles and redundant searchbar
I have used the custom new tab add-on for a long time. 4x4 tiles, no search bar, custom background... It was great. A million times better than the standard crap they give you. Since the last update I'm stuck with the standard new-tab page, which I hate. Plus, Google is the ONLY standard search machine available. Yes, you can use others, but not as standard. Bye bye privacy.
Let me sum up the only 2 reasons I used firefox in the first place:
1. The ability to NOT use big brother's services (Google)
2. The CUSTOMIZABLE new-tab page (4x4 tiles instead of 4x2). WITHOUT a redundant search bar.
With last update you have disabled these both. No 4x4 tiles, redundant search bar (there are now 3 search bars instead of 2. 3 times better searching eh?)... I'm done with Firefox. I don't even know why I bothered to take the time to write this.
Mozilla you suck. Every time there's good community driven thing going on, you idiots ruin it.
''Edited by a moderator due to language. See the [http://support.mozilla.com/kb/Forum+and+chat+rules+and+guidelines Rules & Guidelines] .''These can get you started;
http://kb.mozillazine.org/About:config
http://kb.mozillazine.org/About:config_entries -
How to change Number range to Contact Person in Customer Master Record
Dear all,
We are maintaining contact person details under contact person tab in customer master record.
Currently contact person is being created using VAP1 transaction.
Can we automate this contact person creation by entering the data in contact person itself?
and where can we change the number range of contact person.
I have searched a lot to find the solution for this. Please help me to resolve this issue. Your suggestions will be highly appreciated.
Best regards
VenkatHi Venkat,
To your first question: "Can we automate this contact person creation by entering the data in contact person itself?"
Yes, you can enter the contact person directly in the customer master in the contact person tab. A number is generated automatically.
To your second question, go to transaction SNUM, and there use object "PARTNER". Here you can configure number range for contact persons.
Hope this helps,
Regards
Nikhilesh -
Hi ,
I have a unique problem in front of me.
I am displaying the department of the contact person on the invoice.
I am retriving this from table ADCP or maximum KNVK if it is not found in ADCP.
The problem is , functional consultant has entered the value in VAP3 ( Contact person ) for department as "BAse Business and managing ".
Now in KNVK it is just "Base Busi" and in ADCP it is blank .So i dont know how to retrieve this value.
I have the partner No & Customer no. with me.
Is there any Function Module which will help me retrieve.
Kindly guide,
Dukhai AtmaDear Atma,
This may be due to field length and No. of Characters so plaese take help of abaper to fix the issue.
Other wise you can define the deportment code in the IMG path is SPRO>IMG>Sales and Distribution>Master data>Business partners->Contact person-->Define standard deportments here you can give some code for your depeortment then you maintain name as discription same you can enter in the customer master general data -->contact person tab that discription you can capture in to your report.
I hope this will help you,
Regards,
Murali.
Edited by: Murali Mohan.Tallapaneni on Dec 2, 2008 11:03 AM -
Hi Guru's
Kindly let me know how to delete the Contact persons or contact person number which is assigned to the Customer master
In Production system, Business Users will not have authorization to open the Customer master in Change mode(VA02).
They want to delete the Contact Person : VAP2.
Is there any program or BAPI available to delete?
Regards
Stephenhi
stephend
you want to delete the contact person , go to XD02 , at general data tab , at contact person view, here you select the you contact person , click on delete row icon , after it will delete , and also check partner function determination, their is any assign the contact person
please check this
regards
sankar -
Target group with customer and contact person
Hi experts,
I want to create a target group with customer data and the names of the main contact person to execute a campaign.
During execution I need the name of the contact person to personalize my forms, the campaign activity should be connected to the customer (and not the contact person).
Is there a functionality to solve my problem? (CRM 7.0)
Thanks in advance.
WernerHi Werner,.
I assume you want to select for Organizations (BUT000 Type 2) and you want to see in the Target Group the Contact Persons which are assigned via Relationship to the Orgnizations.
Create for example a Datasource with Infoset CRM_MKTTG_BP_ORG, and under Details for Business Partner use BUT000_PER-PARTNER_GUID.
In Field Function Module maintain CRM_MKTTG_PF_BP_TAB_TO_CP.
Create an Attribute List an assign the Datasource. After Creating the Target Group you will see the Organizations with all the assigned Contact Persons via Relationsship.
Regards
Andreas
Another Tip: Create a Target Group for Persons, assign it to the Campaign, and now set the B2B Flag. Depending from your SP Level you have to apply a note so that the B2B Flag is visible (1263915)
If you set the B2B flag you will get Communication Data for letters, for a Call List from the Relationship.
Regards,
Andreas
Edited by: Andreas Pauli on Apr 29, 2009 10:18 AM -
Contact persons not created with partner function in R/3
When we create a contact person in CRM and assign this to a business partner, and assign a sales area and partner function in the usage tab, the contact person is replicated to R/3 correctly. However in R/3 the corresponding partner function is not created. This also happens to other BP relationships (ship-to, bill-to etc.).
Does anyone have a solution for out issue?
Thanks in advance,
Pascal.Hi,
Please check that you have maintained the partner funtion mapping between CRM and R/3 in IMG Path:
Customer Relationship Management>Basic Functions>Partner Processing>Data Transfer>Distribution of Partner Functions from CRM into SAP ECC
Best Regards,
Pratik Patel
<b>Reward with Points!</b> -
Add new contact person in contact management
Hi All,
I have been created email in contact management(SRM).
in Tab "General", Contact person field, i cannot select new item/New contact person from combobox.
I have read at HELP file,then i found to add new contact person in contact management, go to SRM menu -> Customizing(UCUS0) ->in the left panel -> clik contact - > double clik contact person.I can direcly add new contact person.
but after i added new contact person.i still can't select new contact person in "General tab(Contact management)".
can u tell me how to solve this problem?
Thanks,
Siandari LimDear William,
There are some notes for enabling the b2b flag. E.g. 1263919 and 1263915 and likely some more. So, that might help you figure out if perhaps you have missing settings for this feature.
But based on the limited information you provided it seems that "Segmentation based on relationships" would be suitable. You can check [SAP help|http://help.sap.com/saphelp_crm700_ehp01/helpdata/en/37/fc60e3bebf4a9ba7121c00e295b3fd/frameset.htm ] for this topic. I was not sure what you meant by "but how to replace the contact person function?"
Quick excerpt:
Segmentation based on relationships offers you maximum flexibility when modeling target groups, especially in business-to-business scenarios. You can select business partners using filters for both personal data as well as data relating to the business partner's organization. The system saves all required information on the business partner, such as contact person, organization, and relationship type, with the target group. In the campaign, the contact person is contacted using the address data of the contact person's organization.
Hope this helps!
Anik
SAP CRM Marketing Moderator -
Hi all,
I'm trying to add the AR Credit Memo, but when adding No Matching Records found 'Contact Person'(OCPR)(ODBC-2028) is occuring...
What is the issue ?HI
ADD in BP Master data under Contact Person tab update contact person details
then will not occur problem ..
regards
Ramudu -
E-mail Issue in More then one Contact Person
Hello Experts,
I Have One Customer : C20000
In this Customer having the five contact person and email for that
now i have creating sales Order and Click on Email Button in Tool Bar,
Now i want to automatically all five contact person in To column and email address of respective column in send message window
Is it Possible through FMS ?
Then How ?
Please Write the query for that
Dixit PatelDear Rahul,
I know the distribution list,
but I want when Click on Add Recipient and Click on Distribution List,
Automatically come to those Customer Code in Find field through FMS
So I have select that List Name
Dixit Patel -
Forms 9i tab pages inside a tab page
hi,
i m using forms 9i, is it possible to set a tab page inside a tab page
ie i have a master tab page called 'Office' and i have to add two tab pages
called 'excel', 'word' as the sub of this main tab..is it possible.......?
if yes how ?
thanks in advance
KKYou can create the illusion of this though using stacked and tabbed canvases. Make the main tab small so that it only displays the labels and then display the other stacked or tabbed canvases dependent upon which tab the user selects. We've done something similar to this and it works pretty well.
-
Hi,
Currently i have, lets say a Contact Person code A assigned to Customer
B. Then this Contact Person is being transfered to another site which
in our system is represented as a different Customer Code.
My question, is there a way to re-assign this Contact person Code from
Customer Code B to lets say Customer Code C without needing to re-enter
and re-assigning all the details of Contact Person code A to Customer C
again in VAP01? Pls advice. Thanks.Edward.
I think you are not talking in R/3 perspective. If so, you can post this in the relevant forum say CRM, then u will get quick answer for this.
Maybe you are looking for
-
How can I set a file to hidden
Hi all How can I set a file to hidden from within Java. This is what I have tried so far but with out any luck String[] cmd = new String[3]; cmd[0] = "cmd.exe"; cmd[1] = "attrib +h"; cmd[2] = "\""+"C:/program files/Licence.xml"+"\"";
-
Creating AIR/Web Apps. with XML & E4X using AS3
Needing tips using AS3 with XML/E4X to make my project work over the server: 1) Here I'm having trouble trying to create a component with a 'GOOGLE MAP' with the user being able to input their location for directions with once submitting the get dire
-
Imac and canopus advc110 can you out put to a monitor
I am new to this apple stuff and have after some pro advice settled for a canopus advc110 to go with my imac, i am now struggling with the settings to output to a monitor please help!!!!!
-
Changed HDD in NAS Drive, lost all links
Hello world, I keep all photos in separate directory structure (16.000 photos in 140 directories), and have the mediathek on the local drive. Now I have changed the HDDs in my NAS drive (dLink DNS 323, connection via smb), and restored all folders fr
-
Hi guro's, I've written a custom canvas to simulate a textarea with some nice functions like a background picture and multi colored lines. Now if come to a point where I got a prolem I could fix. Suppose this is a bit of text I want to "lalalala [k00