Customer Material Infomation Missing
**Hello Friends,**
**We have a scenario where we create Delivery without Referance to an Order and in the Invoice we see that Customer Material Information is not getting copied.In the Billing i see that it is taking referance from VBAP Table but in our case we don't have any referance to a Sales Order so it is not getting copied there. Is there any way we can make the changes in the copy control to make it appear in the Invoice as the Customer Material Information is already available in the Deliery document. This information is very vital for us as the Invoice Idocs should carry Customer Material Information which is not happening currently.*
Customer Material Information can be seen in the Invoice Item Tab -PO Data.
Thanks in advance for your help
Sunil
The field on the invoice item PO data tab is VBAP-KDMAT. It is a view to a non-existent sales order, so you cannot populate it with data on your type of invoice.
HOWEVERu2026u2026you really need the CMIR data on the Idoc, right?
So use an invoice IDoc user exit to insert the appropriate segment.
My particular favorite exit for such things is INCLUDE ZXEDFU02, which is found in function module EXIT_SAPLVEDF_002.
An Idoc type INVOIC02 should carry the customeru2019s material number in an E1EDP19 segment with qualifier QUALF=001. Set up your exit to test for the existence of such a segment. If it is not found, then query table KNMT for the KDMAT that you want and insert the new E1EDP19 segment at the appropriate index.
Similar Messages
-
Customs product master missing error
Hi,
while creating sales order and saving it, iam getting the error, "subsequent processing not allowed(Customs product master missing 12123). contact customes excise tax dept""........and i cannot save the sales order.
12123 in the error message above is material number.which i give in sales order.......................the message no is FTPI901
what is the issue. ??? at first i thought some coding is done in user exit for sales order.. but i cannot find any such code in exit.
regards
sachinHi,
for transfering material master data from feeder system (R/3 / ERP) to GTS follow these instructions:
- go to SAP GTS PlugIn Menue in ERP
Transaction Code: /SAPSLL/SAPLMENUE_LEGAL_R3
- go to Tab "Initial Transfer of Mast. Data"
click on "Transfer Material Masters"
- choose your particular material and execute (F8)
hope that helps!
regards,
Ralf -
No creation if material is missing, Still IW31 ( Work order ) is getting created
Hi Experts,
I reviewed few discussions and unable to get the correct answer.
I did the configuration for Material availability check on Order Creation with Path ..
Plant Maintenance and Customer Service - Maintenance and Service Processing - Functions and Settings for Order Types - Availability Check for Material, PRTs, and Capacities - Define Inspection Control
In this I assigned my order type with Business Function 1.
Material Availability :
Plant XX01
Order Type XX09
Availability Check 1 Check availability during order creation
Checking Rule 01 No Blocked Stocked - All rec/issue elmts
Component Check Type Blank
Collect. conversion 3 No creation if material is missing
PRT Availability :
No Check ( Not checked )
Checking Rule 01 Status check
Collect. conversion Blank
Capacity check
No Check ( Not checked )
Overall profile Blank
Collect. conversion Blank
My question is:
MMBE for that Material ZERO.
Before Config,
when I create Order manually IW31 with a components , Status is showing Mat.availability not checked ( MANC ).
After Config.
when I create Order manually IW31 with a components , Status is showing Material committed MACM.
When Configured for [Collect. conversion 3 No creation if material is missing], still order is getting created.
I changed to 2 or 1 , still order is getting created with no difference
But its going to a confirmation proposals asking me to do
either continue / ATP quantity / Scope of check.
If I select 1 or 2, it should show Missing Parts status or if select 3, it should stop creation of Order. But its not happening as expected.
Please let me know where I am missing Config.Hello
Q1 )
If I change option 1 or 2 :
1 User decides on creation if material is missing
Answer:If Material is not Created the system wont allow to add you that material until unless you create the material master created.I am considering here that you don't have material master
2 Creation even though no material is available
Answer:It will allow you to create the work order.i am considering here that you don't have sufficient stock.
Q2) what should be the expected Status for Option 1 or 2.
Before Config it was showing
Status is showing Mat.availability not checked ( MANC ).
After Option 1 or 2, Expected Status ?
Answer: You need to enter value 02 on the Availability Check field on the MRP3 tab of Material Master via TC MM02.
you will be get Material committed MACM after Saving the Order.
Br
Rakesh -
To Capture Excise Duties for Customer Material
Dear All,
Issue is regarding to capture excise invoice
for Customer Material.
1.
one of our client receives Customer material which
should not be reflected in
stock.
2. Excise should be captured which
receiving
3. Now
when this Customer material is returned back to
customer along with
the assembly (i.e. the material received from
customer is fixed
in Assembly and sent back to
customer),
4. Now
the excise
captured should be transfered back to customer's A/c.
I tried
doing by creating a material type as customer material, where in
Stock will be reflected but value will not be reflected, where exactly
we
can capture the excise details for this scenario.
How
to
proceed further to complete his scenario.
Consider this
issue
to be on high priority & i/p will be of great help.Dear Vijayashree
From your comments what I understood is that for a particular FERT, you are procuring one component from the buyer, assembling it and invoicing to the same customer.
If this is the scenario, I dont know how you can invoice without maintaining BOM for that.
If the client dont want to maintain BOM for the same, the only option is as follows to my knowledge.
Whenever the client receives the component, take credit of the duty amount by updating <b>J1IH</b>. While doing PGI, since you have not maintained this component in BOM, stock will <i>ONLY</i> reduce for other components. So no-where, your client can track the customers component.
Parallelly, apart from selling price, to the extent of excise duty value, one more condition (say ABCD, to be maintained. So in your pricing procedure, the assessable value should be PR00 + ABCD for which, the excise duty should be captured so that the client can recover the duty amount from customer.
Finally, for this practice, the client should maintain datas (how many procured and how many invoiced) manually to convince the government officials but then, I am not sure, how far this will be accepted by the officials.
Thanks
G. Lakshmipathi -
Customer material info records are not getting displayed in Sales order
Hi ,
We are upgrading our client sap system from ECC 5.0 to ECC 6.0 .We are now in the testing phase .An issue came up regarding customer material info records .
When we are creating a sales order using VA01, after entering Material number and order quantity for an item if we press the ordering party tab(before saving the sales order) the customer material info records (value in cutomer material number) are gettting displayed.But if we save the sales order we are not able to see the customer material info records.
kindly guide me in this issue .
Thanks in advance .
Nikhilhi nikhil,
check the tick box in vov8 "read info record",and when you create sales order(va01),dont enter the material number enter the "customer material number" and see whether you are getting the material number.
and also go to (va02) and check whether you are getting the CMIR details.
pls explain me the problem in detail for my better understanding
regards
senya -
How to get the salesprice and condition for a customer / material / date
Hi all,
how can I get the correct price and condition for a customer / material / date ?
I know this is possible using the BAPI_SALESORDER_SIMULATE, but this bapi is using to much ressources on the system.
I'm trying to get the correct price and condition WITHOUT using that BAPI.
Does anyone know how it is possible ? As said before : I have the customer, material and a date.
thanks in advance for your helpHi
You need it because it's possible to have a complex pricing procedure, and you can't do it with a simple select on a table. Think that you can have pricing requirements, formulas (ie: VOFM) and so on in your pricing procedure (tcode V/08).
I hope this helps you
Regards
Eduardo -
Material Description in SO from Customer-Material Info Record
Hi,
Currently whenever user is entering the customer material number in SO item, system is bringing the SAP internal material corresponding to that. But the material description is coming from the material master only.
I want the material description in the SO item to be populated from Customer-Material Info Record whenever user entered the Customer material number.
Any possibilities for the same by standard configuration without going for any enhancements.
Thanks in advance,
MallikHello
Go to T code VD52 choose that customer and material combination and click on to its details blue lens on application tool bar
In the screen which is coming ,enter your description in the CUSTOMER DESCRIPTION tab the second one and save
Now create a sales order and see
Your requirement will be fulfilled
If a material is pen description is ball pen in material master and for customer A you have defined it as Pen 1 and description as Super ball pen in VD51
Now in sales order the description will appear as Super ball pen
Hope you have checked the field info record in VOV8
I have tried this tested this and getting it
Regards
Raja
Edited by: ramanathan raja on Dec 2, 2008 10:43 PM -
Populate Material no in sales order based on customer material no
Hi,
We have to pass material no from a custom table based on customer material no in each line in the sales order. I tried using couple of userexits to pass vbap-matnr and the material no is passed in that line but I am not able to enter quantity etc on that line. I'm using USEREXIT_MOVE_FIELD_TO_VBAP to populate vbap-matnr but I think this is not the right place to populate matnr in the line item. Can you please help.
Regards,
SAHi,
Can you help me where to pass customer material no to derive material no as my company is not using knmt but a custom table?
Yeah, if we maintain an entry in knmt, the customer part no derives the material no but I don't know where to pass material no so that the appropriate tables are populated automatically.
Regards,
Sheel -
Disable Customer-Material Number field during VL02n before post goods issue
Hello SAP gurus,
I would like to ask the possibility of disabling the field "Customer Material Number' during outbound delivery creation.
As we would know, this field (LIPS-KDMAT) will only be disabled after post goods issue.
Will it be possible to disable the field without having to post goods issue first?
Thanks in advance.
JaysonI think you can do with SHD0 screen variant, or else you need to go with userexit to make display field.
-
Outbound delivery without reference and customer-material info record
We use outbound deliveries without reference (L0). Several customers want their own material number printed on the delivery notes.
So we considered using customer material info records. Unfortunately, the customer material number is not copied from the customer material info record into the outbound delivery position.
Do any customizing settings exist that we might have overlooked? Or is this behavior a "feature"? Any hint would be highly appreciated.
Best regards,
GeraldHi Gerald,
have you ever figured a solution for this issue?
I'm now facing the same issue and could need some support. I found some documentation for the USEREXIT_CUST_MATERIAL_READ, but I don't know whether that could be used as a solution.
Please let me know or if anybody else knows something, please feel free to chip in your knowledge!
Thx & regards,
Bobby -
Custom button goes missing after click the button in Customer Master
Hi All,
I have one query regarding Custom tab button in Custome MAster.I have implemented BAdIs using CUSTOMER_ADD_DATA_CS and CUSTOMER_ADD_DATA to match my requirment.
Query:
While click the custom button(which i have created in Customer Master) , the subscreen is displayed but the Custom Button is missing.Where in Standard Buttons like 'GENERAL DATA' and 'COMPANY CODE DATA' Std buttons in Customer master Etc. buttons going to disable mode while click these button in custome mastar.
Is there any OSS notes to implement OR we required to set up some PF status to match above requirment.
Please let me know.
Thanks,
SridharIf I follow you, no. That's the way it works. The buttons are composited with the background so become part of it. I'd rethink the design.
Basically, you don't want the highlights to determine the color of unselected buttons. You'll always have fringes and jaggies. Having a non-transparent color set for the unselected state kind of does what you want, but won't look the best. -
Function module to get Conditions based on Customer & Material
Hi,
Is there any function module such that the list of conditions are displayed, based on Customer & Material given?
Thnx in advance,
Shivaa.....actualy Jan this report is based on GL account no..GL acount no.s dat we required are not there in bsid n bsad...we need bank related GL account no..IN BSID n BSAD all GL account no. are customer GL account no.s...
-
Function module to read 'Customer Material InfoRecords'?
Is there a function module to read customer material inforecords?
Transaction code VD53 is the display screen for Customer Material INforecords. I have a requirement to read this data in user exit.
Thanks
GovaI found one FM. RV_CUSTOMER_MATERIAL_READ
But it won't serve my purpose as I need to find customer material number for a given material number.
But, I found the table where this information is stored. KNMT. I'm going to create a custom FM to serve my purpose. -
Customer Mat Nr missing in delivery
Hi,
I am trying to figure out why the field Customer Material Number is empty on a delivery.
The delivery is created from a Scheduling Agreement, Agreement type LU (Vendor field empty).
Can you give me a suggestion please?
ThanksHi,
Data on a material defined for one specific customer is stored in the customer material information records. This data includes
the customer-specific material number
the customer-specific material description
customer-specific data on deliveries and delivery tolerances
If, for example, one of your customers uses a number for a material, which differs from the number your company uses to identify it, you can store the material number used by the customer in the customer material information record.
In customer Material info record mainatin the delivering plant.
VD51-Maintain the material no. and customer material no.select the overview. And maintain the Delivering plant,delivering priority.
regards,
Saju.S -
Customer line item missing in accounting doc after billing
Hi experts...
We are facing an issue after generating billing document, accounting document is created automatically but in that accounting document the customer itself is missing in the entry where as other line items like revenues, taxes are visible. where could have been the mistake. Kindly help with the possibilities of missing configuration.
Ideal entry should have been like
Customer dr
Revenue cr
Output tax cr.
Cheers,
SravanthiHi:
Check for missing authorization in SU53 immediately after you face this issue..I think you are missing an authorization object F_BKPF_BED activity 03 or F_BKPF_BES Activity 03/.. Please ask BASIS guy he will resolve your issue.
Regards
Maybe you are looking for
-
I've Made the Switch (from iWeb) &; Lived to Tell About It.
I've gotten a lot of help and useful information from this forum over the years and I will certainly miss it. I've just completed a 2 month transition where I've migrated my site from iWeb/Mobile Me to a new site made in RapidWeaver and hosted by Hos
-
I have a MacBook, do I need to clear the memory or defragment the disk like I need to do on my work pc with Windows? If so, what do I need to d
-
The volume for documents cannot be found message
Similar threads didn't quite yield the results I was hoping for, so I thought I would give this a shot. I am getting a "the volume for documents cannot be found" message when I click on my Documents folder in the lefthand column of a Finder window. I
-
My external hard drive (1TB WD My Book Essential) suddenly has no room to backup with Time Machine! I am using Maverick OS and wondered if it is because of a bug in the system software. I purchased a new external drive with 3 TB and wonder if I will
-
Is there any good Linux software to show slideshows, videos and more?
Hi. We are trying to replace windows and apple on all computers in our church. Now, I know we will most likely hang on to some of our macs for video editing purposes, but we have identified several computers that runs Windows that can easily use Linu