Customer material number in STO

Dear All,
We are replinishing the stock to our consignment plant by using Stock transport order with Sd delivery & inbound delivery.
From this consignment plant the customer is with drawing stock by using his own material number.
We need to provide customer material information or number in the printout of outbound delivery or inbound delivery which gets created against STO by which we are replinishing the stock to our consignment plant in the SAP version 4.5B
Can you please help in this?
Thanks in Advance
Kishore

Dear Ramakrishna,
Thanks a lot for your answer.
But my problem is as follows.
We are replinishing the stock to our consignment plant by using <b>Stock transport order(interplant)</b> with outbound & inbound deliveries from this STO.
From this consignment plant the customer is with drawing stock by using his own material number with normal SD flow.
Our requirement is how to link the Customer material number with SAP material number in the deliveries which got created against STO(Interplant)
Even if we maintain Customer material info records how to get this data in to STO or Inbound OR outbound deliveries.
Once again tahnks a lot
Can you help me in this?
Best Regards
Kishore

Similar Messages

Disable Customer-Material Number field during VL02n before post goods issue

Hello SAP gurus,
I would like to ask the possibility of disabling the field "Customer Material Number' during outbound delivery creation.
As we would know, this field (LIPS-KDMAT) will only be disabled after post goods issue.
Will it be possible to disable the field without having to post goods issue first?
Thanks in advance.
Jayson

I think you can do with SHD0 screen variant, or else you need to go with userexit to make display field.

Customer Material Number to be mandatory in VD51/52

Hi,
There is a requirement to make Customer Material Number (KDMAT) mandatory while creating CMIR through VD51 or VD52 transactions.
I tried, but couldn't find any user exit or BADI for the same.
Can anyone suggest, is there a way to achieve it?
Regards,
Aslam.

Hi Mohammed,
Try Implicit Enhancement for the particular screen. If available, check whether the field is Initial, based on that allow the system to proceed further steps.
Also SHD0, please find the link below.
How to Create a Transaction Variant
Regards
Rajkumar Narasimman

Issue with Customer Material Number in sales order

Hi All,
I am facing one strange issue.
Accoding to the flow of my client system the customer Material number is automaticlly populated while creating the line item in sales order. The Customer Material number come from the Configuration of the Item.
This is working properly in the quality system but in the prodcution system for some cases this customer material number is not coming.
The customer material is not coming in production only some times other wise it works properly.
I am not able to understand what may be the issue as it is working properly in the quality and in the procudtion it is not coming only for some line item.
Kindly help.

That depends on either configuration used in your system or any enhamcement used.
So check the cases for which they have configured it or used any enhancement.

User exit needed for KDMAT (customer-material number )

Hi! I need to find a user exit for filling in the customer-material number (KDMAT) in the Sales order. If there is not a cutomer material info record, the filed should be filled in with the Old material number from the Material master (MARA-BISMT). Does anyone knows such a user-exit.
Thanks

You can try with any of the following sale order user exits
- User exits in the program MV45AFZZ - USEREXIT_READ_DOCUMENT
- User-Exits in program MV45AFZB - USEREXIT_CHECK_VBAP
- User-Exits in program MV45AFZB - USEREXIT_CUST_MATERIAL_READ
thanks
G. Lakshmipathi

Two customer material number assignment for 1 Master material.

Hi Experts,
In customer material info records its a one on one mapping, ie for every master material there can be only one cutsomer material number.
Is it possible to assign two different customer material numbers for one sap material.
The requirement is for 1 material users wants to keep two customer material info records which can be used in diff scarios as per the requirement.

Hi,
Mapping is one to one between material and customer.
>Is it possible to assign two different customer material numbers for one sap material.
Yes possible, provided that's for 2 different customers.
You can have 2 customer material numbers for same customer / same material.
Same material can have more than 1 customer material numbers, for different customer.
Best regards,
Anupa

Customer material info records are not getting displayed in Sales order

Hi ,
We are upgrading our client sap system from ECC 5.0 to ECC 6.0 .We are now in the testing phase .An issue came up regarding customer material info records .
When we are creating a sales order using VA01, after entering Material number and order quantity for an item if we press the ordering party tab(before saving the sales order) the customer material info records (value in cutomer material number) are gettting displayed.But if we save the sales order we are not able to see the customer material info records.
kindly guide me in this issue .
Thanks in advance .
Nikhil

hi nikhil,
check the tick box in vov8 "read info record",and when you create sales order(va01),dont enter the material number enter the "customer material number" and see whether you are getting the material number.
and also go to (va02) and check whether you are getting the CMIR details.
pls explain me the problem in detail for my better understanding
regards
senya

Material Description in SO from Customer-Material Info Record

Hi,
Currently whenever user is entering the customer material number in SO item, system is bringing the SAP internal material corresponding to that. But the material description is coming from the material master only.
I want the material description in the SO item to be populated from Customer-Material Info Record whenever user entered the Customer material number.
Any possibilities for the same by standard configuration without going for any enhancements.
Thanks in advance,
Mallik

Hello
Go to T code VD52 choose that customer and material combination and click on to its details blue lens on application tool bar
In the screen which is coming ,enter your description in the CUSTOMER DESCRIPTION tab the second one and save
Now create a sales order and see
Your requirement will be fulfilled
If a material is pen description is ball pen in material master and for customer A you have defined it as Pen 1 and description as Super ball pen in VD51
Now in sales order the description will appear as Super ball pen
Hope you have checked the field info record in VOV8
I have tried this tested this and getting it
Regards
Raja
Edited by: ramanathan raja on Dec 2, 2008 10:43 PM

Outbound delivery without reference and customer-material info record

We use outbound deliveries without reference (L0). Several customers want their own material number printed on the delivery notes.
So we considered using customer material info records. Unfortunately, the customer material number is not copied from the customer material info record into the outbound delivery position.
Do any customizing settings exist that we might have overlooked? Or is this behavior a "feature"? Any hint would be highly appreciated.
Best regards,
Gerald

Hi Gerald,
have you ever figured a solution for this issue?
I'm now facing the same issue and could need some support. I found some documentation for the USEREXIT_CUST_MATERIAL_READ, but I don't know whether that could be used as a solution.
Please let me know or if anybody else knows something, please feel free to chip in your knowledge!
Thx & regards,
Bobby

Function module to read 'Customer Material InfoRecords'?

Is there a function module to read customer material inforecords?
Transaction code VD53 is the display screen for Customer Material INforecords. I have a requirement to read this data in user exit.
Thanks
Gova

I found one FM. RV_CUSTOMER_MATERIAL_READ
But it won't serve my purpose as I need to find customer material number for a given material number.
But, I found the table where this information is stored. KNMT. I'm going to create a custom FM to serve my purpose.

Validation of vendor material number in IDOC_INPUT_INVOIC_MRM

Hi folks,
Scenario: Inbound EDI vendor invoices received as IDOCs.
I'm using Logistics Invoice Verification process code INVL to receive and post vendor invoices on to the ERP2004 release of R/3.
I have purchasing info records setup with the vendor material number.
When I process an inbound vendor invoice, I can put in a customer material number i.e. a material number existing in material master in E1EDP19-IDTNR with qualifier E1EDP19-QUALF = 001. When I do this, R/3 checks that the material number is valid and refuses to post an invoice if the material number is invalid - this is good.
This means that the EDI program parameters with the 'Check Material Number' enabled is working as expected.
Now when I only have a vendor material number i.e. E1EDP19-QUALF = 002 an E1EDP19-IDTNR = vendor part number, R/3 posts the invoice even if the vendor part number is invalid - IDOC_INPUT_INVOIC_MRM does not seem to be validating the vendor part number. The document posts whether I use a valid vendor part number or an invalid one - what am I missing?
Satish

I can answer by words of Axel Angeli - top level SAP R/3 consultant and R/3 cross-application development coach, the author of classic book "SAP R/3 Guide to EDI, ALE and Interfaces":
"SAP R/3 delivers a serious of predefined EDI programs. Many project administrators see them as standards which should not be manipulated or modified. The truth is, that these IDoc processing functions are recommendations and example routines, which can be replaced by own routines in customizing."
and
"SAP R/3 is delivered with a series of predefined IDoc types and corresponding handler function modules.
Some of the handler programs have been designed with user-exits where a developer can implement some data post-processing or add additional information to an IDoc.
You must always see those programs as examples for IDoc handling. If the programs already do what you want, it is just fine. But you should never stick to those programs too long, if you need different data to be sent."
So now you can feel free to customize
Regards,
Maxim.

Sales order - entering customer material

Hello,
We have list of machine part numbers which do not tally with a customer machine parts numbers.
For example our part number is TSS0001 whereas Customers part number is 004-XVG-43966-1
Customer would like to have his own part number listed in the sales order.
Is there a field in sales order where we can enter customer part number?
Thank you

Hello,
this can be effectively done by maintaining Customer Material infor records. Data on a material defined for one specific customer is stored in the customer material information records. This data includes
customer-specific material number , customer-specific material description.
For example, one of your customers uses a number for a material, which differs from the number your company uses to identify it, you can store the material number used by the customer in the customer material information record.
During order entry, items can be entered by specifying the material number used by the customer. You also enter a customer material number in the order view of the sales order. You can then use both material numbers during the order entry, the material number your company uses or the one defined by the customer, because the system can carry out allocation automatically.
The transaction code is VD51.
Prase

Customer material

Hello,
While in sales order, is to possible determine customer material from description of material?
As an example, customer material number is 100 and description of material is Helium. so in sales order, I enter only Helium and system should determine material number as 100. How is it possible?

Create a customer material info record for this customer and material.
Enter the Material as '100' in material field & customer material as 'Helium' in customer material field of customer material info record.
Ensure that you placed a check mark in field 'read info record' in your sales document type.
Now create a sales order and when you enter description of material as Helium, system would automatically determine material number as 100.

Customer material inforecord

Hi
I have a request concerning customer material inforecords.
1. Is it possible to make for a defined customer the customer material number mandatory in a sales document,
anyone know if there is a standard solution for this ?
2 If the customer material inforecord is defined at a Hierarchy node level can this be inherited in a sales document to any sold to parties defined under that Hierarchy node,
Hopefully these can be covered by customising.
Thanks for any replies.
Kind regards
Steve

Hi Steve,
How is the business volume for these type of customers?
If Business volume is high & you are open to make some additional customization.
Then I suggest you to create new item category - which isthe copy of the normal sales item category & Determine based on
item usage is one fo teh key parameter ( which is maintained in CMIR)-
I pressume, this one you are looking only for Normal sales/ regular sales.
In incompletioon procedure @ item level- you can set this field as mandatory. -
Else, you can go for development at item level
using exit
in Include:MV45AFZB
Regards,
Reazuddin MD

Customer part number to be printed on the output

The system shall automatically display/print customer part number or product name on document output.

Hi,
Your document output depends on Output program attached to your output condition type.
So if the field Customer Material Number/ Part Number ( VBAP - KDMAT) is to be printed for the document output.
Ask your abap consultant to add this field in the output program and form
Field name
VBAP - KDMAT
regards,
Ashish

Customer material number in STO

Similar Messages

Maybe you are looking for