Customer name range object (Z* and Y*) in Modification Browser SE95

Hello,
Why it's possible that object within customer name range regarded as modified standard object in modification browser?
These objects had been imported from another system (not from the same landscape) and some of the objects within the transport request showed as modified object. The weird thing is, not all of the objects are shown.
Anybody had same experience before? How to explain the logic behind?
Thanks in advanced.
Hiroshi

What happens, when embed the object tag in the webpage.
Try using the <PARAM NAME = CODEBASE VALUE = "./lib"
if your applet is not able to find the signed.jar.
Try looking into the java console for any ClassNotFound Exceptions.

Similar Messages

Customer Name Range for Specifications of Evaluation Class

Dear Friends,
Is there any SAP recommended Customer Name Range for Specifications of Evaluation Class ....
As suggested by SAP to check in the Customer name range table V_T52DN....there is nothing mentioned about the customer name range for table V_T52D4.
That means we can give use any naming conventions , make the necessary changes and document it
I am concerned about ...whether it can give any issue while upgrade or any further development by SAP
Would appreciate your valuable inputs and suggestions regarding the same
Thanks & Regards
Srijit R Menon

Hi Vk.
Thanks for the reply
Yes the SAP has mentioned that
The evaluation classes that are provided with the standard system are
stored in the SAP name range from 01 to 17. Evaluation classes 18 to 20
are available for customer entries.
But i am concerned about Specifications for Evaluation Class ....for which SAP has not suggested any Customer name range

Customer name range in SAP

what is customer name range in SAP

Hai.
check the links.
http://help.sap.com/saphelp_nw04/helpdata/en/2a/6b0b1f547a11d189600000e829fbbd/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/2a/6b0afe547a11d189600000e829fbbd/content.htm
http://www.sappro.com/downloads/SAPNamingConventions.pdf
http://sapabap.iespana.es/sap/oss/0016466.htm
regards.
sowjanya.b

Transporting Custom Number range Objects

Dear SRMers
System Information: ECC 6.0,
We created Z Number range objects for Eforms in ECC system A , created a Transport Request with the tasks containing the individual Number range objects and, released the transports in SE10 and transported them to ECC System B (with Basis Admin help).
After the moving the transports, we see the individual custom objects in System B, but the number ranges defined are missing for each object. The Basis admin tried couple of approaches but was not successful.
If any one has come across, this problem, please advice.
Points will be rewarded for answers.
Thanks in advance,
Best Regards,
Bob

Hi,
In transaction SNRO enter the Z number range.
Press the "Number Range" button (F7)
Press Interval-->Transport.
That should create a transport for you.
Cheers
Rob

While creating Projects Using the API, get two errors: 'Customer name must be passed' and 'class category is invalid'

Hi
While trying to Create Projects using the API, I'm getting two types of errors -
The first is : 'API failed in one stage 1 Customer Name is a mandatory Quick Entry field. Value must be passed'
The second is : '
'API failed in one stage 1 Project: '<Project_Number>'
The class category is invalid.'
Both the messages are produced by our custom program. .. however I am not able to understand why the underlying errors occur.
The first error ( Customer Name is a mandatory quick entry field), is caused by Projects that are to be created from Project templates where it is configured with Quick Entry Customer Name required. We are passing Customer Site number ( Party Bill to site number and Party Ship to side number). The site numbers being passed are also set as 'Primary'. Yet they are failing.
For the second Error ( The Class Category is invalid), I rechecked multiple times, the Class categories for the Projects I am trying to create, with the Config in R12 and they are fine. Can't understand the reason for these two issues. Has anyone encountered such an issue ? If so how was it resolved?
Regards
Vivek

HI All
I resolved both the issues. In case there are others facing similar issues, following was the cause and resolution of my errors
1. Error 1: Customer Name is a Mandatory Quick Entry field. Value must be passed.
The cause was that the data loaded into our custom staging table was not in the right fields. This was because the data file values and the CTL were not in sync.
Resolution:
Corrected the data file to be in Sync with the structure defined in the CTL and this loaded it successfully
2. Error 2: The class category is invalid.
The cause of this error was that in the Projects Template (used to create the project from), the Quick Entry setup had a Class Category set as required and I was not passing a value ( a class code value) for that Class Category.
Hope this helps somebody else
Cheers
Turnbill

Number range object   :    J_1IINTPR2 and J_1IEXCLOC

Hi ,
I want to know in which step of SD process the no. from the number range of Object
           J_1IINTPR2   : Dispatch serial number
            J_1IEXCLOC : Local excise invoice number range,   is assign
means as when we create the SO the no. is assign from the SO no. range so similarly when at which steps the no. is assign from the above two objects.
   regards,
    zafar

If the process involves local despatch from a manufacturing plant, then you need to maintain number range in TCode SNUM for the above two objects. Of course, you need to have Excise Group and Series Group to generate an excise invoice.
thanks
G. Lakshmipathi

PSA - Name of object - *pa and *ob

Hello,
we have a process chain which contains a delete job for PSA.
Within this process there is following:
Name of PSA table: ZBW_UM1_PA and
Name of PSA talbe: ZBW_UM1_OB
Question:
What is *PA and *OB ?
Thanks in advance.
Points will assigned if the answer is helpful.

Hi,
_PA and _OB are created to allocate PSA tables to logical source systems (one PSA for each). To "translate" it, use table
RSBASIDOC field TSPREFIX there you will find PA and OB..
Regards
Joe

Sequential numbers in non-buffered number range object

I need some help pointing in the right direction to analyze and prevent a problem with a NON-BUFFERED custom number range object.
This process works well. Once or twice however, sequences have been created with an apparent delay and are out of order. I don't know why, or where to look to diagnose the timing, etc. It's very difficult to recreate.
We have a custom number range object; ZFSEQ in SNRO that is responsible for assigning a sequential number to a series of flat files produced by number of different interfaces. Those interfaces all use the FM 'NUMBER_GET_NEXT' and then they build a file name with that sequence number. That object is not buffered.
During heavy volume of updates (where lots of these sequences are being called and created by different interfaces, the table NRIV is locked and released by each interface. During this time of heavy updates, we have an infrequent problem that has occurred where a standard sales order create created a sequence number that is greater than the sequence number generated by the delivery create. (The delivery was created a couple of minutes later than the order, yet the order created a flat file sequence number greater than that of the delivery.
I hypothesize that the flat file call for the order (using the FM 'NUMBER_GET_NEXT') was somehow delayed(because of heavy lock/usage of NRIV). The actual order document and delivery document were created normally. I also am thinking that buffering on the object would prevent this. I cannot at this time implement buffering on the object, but we are working towards that.
The order create originates from our e-commerce system through a webserive, and in SAP, flows like this:
Main webservice RFC:     Z_ORDER_CREATE
          Call Z_create_order_bgd IN BACKGROUND TASK
                                  Call BAPI_SALESORDER_CREATEFROMDAT2 )
                                   MV45AFZZ--> userexit_save_document.
                                        call Z_FUNCTION_TO_GET_SEQUENCE
                                                  CALL FM 'NUMBER_GET_NEXT'    <---- order create sequential file created
          commit work.
The delivery sequential file is created in
     MV50AFZ1 (the Delivery User Exit)
Where can I look to conclusively see what happened to delay our sales order sequence? What could be done to prevent it?
Thanks
Jeremy H.

Just want to post the answer that we found to this issue and close it, though more comments are always welcome!
We are going to move forward with buffering the Z object for the range as studies have shown and all other consulting input seems to be that buffering will solve this problem.

Number Range Object maintained programatically

Hi,
I have custom number range object. I need to maintain this by programatically and NOT using transaction code SNRO. (ie create new instance, maintain Maximum number , delete instance etc)
Anybody having a piece of code or info on this ?
Your help will be appreciated.
Thanks
Sa_R

hi Sa_R,
u can try using the "ABAP Debugger",
this transaction use the program "SAPMSNUM", go to SE80 and Display the Program, it's using the Function to show / edit the range's.
     CALL FUNCTION 'NUMBER_RANGE_UPDATE_INIT'
          EXPORTING
             OBJECT           = OBJECT
          EXCEPTIONS
             OBJECT_NOT_FOUND = 1.
     IF SY-SUBRC NE 0.
        MESSAGE A010 WITH OBJECT.
maybe it can help u.
Regards
Allan Cristian

Regarding Linking Customer Name in Purchase Order PLD

Dear Experts,
I need to show the Customer Name in Purchase Order PLD. Purchase Order's base document is Sales Order. Eventhough i mapped the sales order table and customer name in the Purchase PLD, the system is hanging and coming slowly like some 1234 blank pages.
How to show the same ?
Pl help, Thanks
Regards
Sundaram

Hi Sunrag......
If your PO is linked with SO. Then you can fetch customer name easily by FMS in PO.
From there you ca gte the Customer Name into your PLD and it wont hang also.....
Regards,
Rahul

Number Range Objects

Hi Experts,
In which tables does the number range objects are stored and their current running number is stored in which table.
Thanks in Advance.
Regards,
IFF

tables NRIV, TNRO and TNROT hold the data for the number range objects and subobjects.
Number range object read and maintain services :
http://help.sap.com/saphelp_47x200/helpdata/en/2a/fa0365493111d182b70000e829fbfe/frameset.htm

NUMBER RANGE OBJECT DOES NOT EXIST AT RELEASE

Hi ,
I am getting a message at production order release i.e.' NUMBER RANGE OBJECT DOES NOT EXIST' in CO01 for one order type whereas i am not getting for other.
I maintained the order type in SNRO so order is getting created.

Hi
Maintain the N Range in T code SNRO for No Range Object AUFTRAG and also in t code CO82 assign the no range maintained in SNRO to the corresponding Order type by maintaining in GROUP in CO82
Plz check and revert
Regards
Anupam Sharma

Get no result in customer name

In the modelling process, I insert a function module from R/3.
When testing data service, I input customer name by value " * smec * ", and then get all customers whose name contain "smec".
But after deploying the model , when I input customer name in the web form, nothing can I get.
Can anybody tell me the reason?
Edited by: Yong Sheng Dang on Jul 30, 2008 4:41 AM

Hi Yong,
May be its Flex version issue.
But as per my knowledge it can happen if you have changed the BAPI fields or data after deploying the model. It seems to be a silly answer but while i worked with VC because we were updating the BAPI so sometimes I faced this type of issue. Please check it also.
May be it will be helpful.
Regards,
Nutan

Object Custom Program Name of class RE and language EN does not exist

Hi All,
We are getting this bbelow error while running a custome program ,
Object <Custom Program Name> of class RE and language EN does not exist
Do any one has faced this similar issue earlier.
Regards,
Sen

Hi,
How did you resolve this problem ?
Re: Object <Custom Program Name> of class RE and language EN does not exist.
I am also encountering the same issue when I am executing the report.
Regards,
SSR.

Object Program Name of class RE and language EN does not exist

Hi,
I'm encoutering this problem.
Object <Custom Program Name> of class RE and language EN does not exist
This appears when i am executing the report .
Has anyone encoutered this? How did you resolve this problem?
Any pointers in this regard are appreciated.
Regards,
SSR.

Hi,
This must be coming from the one of the function module exceptions that you are calling in the method. Put break points at all function module calls and find out the reason.
Thanks,
Naveen Inuganti.

Customer name range object (Z* and Y*) in Modification Browser SE95

Similar Messages

Maybe you are looking for