Customer No./ to be displayed in FBL3N

Hi,
I have a issue.
In case of 1 of my clients , requirement is to display customer no. in GL line item display( FBL3N).
I I have activated the product ZFBL3N in products > customer in FIBF & also assigned to event 1650 -LINE_ITEMS_GET_GKONT in settings > P/s function mudules > of customer. Still customer no. is not getting displayed.
Please inform if I am missing anything.
Kindly help.
Thanks & Regards
Bhairavi

Hi Sanil,
Thanks for your reply.
I checked the config in the attached document.
2 Steps mentioned below are not done,
Append structure RFPOS/RFPOSX with additional fields
 Run the report RFPOSXEXTEND in order to update the structure RFPOSXEXT from RFPOSX
i will check with abapper on the above 2 steps.
I have directly done the third step of BTE 1650 .
The issue is customer no is displayed in GL's which are marked as Recon A/cs but not in case of other GL's . My requirement is customer no should be displayed also in case of GL which is not a reconciliation A/c.
Kindly advice.
Thanks & Regards
Bhairavi

Similar Messages

Vendor/Customer name to be displayed in FBL3N

Hi Gurus,
I wanted to be displayed the Vendor/Customer Name to the corresponding entry in the line items of the G/L account
Please provide your valuable solutions.
Regards,
Imran M Arab

Dear Imran,
I have this info about the fields Vendor number (LIFNR) and Vendor name
(NAME1) in FBL3N.
The relevant tables for the G/L Line Item Display is BSIS/BSAS and BSEG.
In BSIS/BSAS you will not find the fields Vendor number (LIFNR) and Ven-
dor name (NAME1), and in BSEG Vendor number is only stored in the Vendor
Line Item and not in the G/L line item, and you will not find Vendor
name in BSEG. Therefore, you are not able to add the fields to the Line
Item Display as a standard field or as a special field in the normal
way.
Anyway, I can suggest You to try a workaround.
The fields LIFNR and NAME1 does also not exist in the structures RFPOS
and RFPOSX. If you need these fields to be shown in the Line Item Dis-
play then you need to add the fields to the structures RFPOS and RFPOSX.
When the structure has been extended with the fields then you need to
run the reports RFPOSXEXTEND and BALVBUFDEL (in the same way as seen in
the solution part in SAP note 215798).
After that you need to use the Open FI Exit 1650 to fill the fields. You
will find a function group FI_ITEMS from transaction SE80. In this func-
tion group you will find a function module FI_ITEMS_DISPLAY where the
form ITEMS_DISPLAY_INIT includes the exits 1610 to 1650. The important
one for your problem is 1650 (OPEN_FI_PERFORM_00001650_E).
This exit is used if you want to display fields in e.g. FBL3N which
does not exist in the tables BSIS/BSAS and also not in the G/L Line in
BSEG.
Through this user exit it should be possible to get the value from the
relevant tables e.g. from the vendor items from BSEG or the value from
BSIK into structure RFPOSXEXT if there is a relation between the rele-
vant tables e.g. BSEG/BSIK to RFPOSX/BSIS.
I hope this can help.
Mauri

How to create a custom layout set to display the KM folders...

Could someone please tell me how to create a custom layout set to display the KM folders?
Thanks,
Sudha.

Hi Sudha,
Please check the following blogs whick will guide you step by step.
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/4123
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3071
http://help.sap.com/saphelp_nw2004s/helpdata/en/c3/c91b5610b65b4aa8204d09384d156b/frameset.htm
If helps reward points
cheers
dev

Custom playbar does not display in the list of available widgets

I followed the steps described in the "Skins" page of the Captivate 5 help outlined here:
http://help.adobe.com/en_US/captivate/cp/using/WSc1b83f70210cd101126156ac11c7f147d6b-8000. html
Now my problem is, that my custom playbar is not displayed in the list of available playbars (neither in the Project->Skin Editor->Playbar nor in the list of widgets). If I just duplicate one of the existing playbar files in Gallery/Widgets/Playbars it's listed without problems.
I use Flash CS5 to edit the playbar and tried to publish it as AS3 and AS2 - no success.
Are there special settings I need to set in the publishing settings to get my playbar in the list? Anything else I'm missing?!
Thanks,
Peter

Try putting the swf for the playbar in ...\Adobe Captivate 5\en_GB\Gallery\Playbars\AS3\

"Line items of Outpput tax a/c is not displayed in FBL3N"

Dear Consultants,
When I was practicing the following problem is encountered.
"Line items of Outpput tax a/c is not displayed in FBL3N"
Thanks in advance,
Siva

Hi Siva,
Isn't the "Line item display" not selected in the GL master (FS00)?
RFSEPA01 program allows to switch line itme management. Therefore you can excute this via SE38 after first blocking the account for postings temporary. First try this in test sytem (I haven't used this programm for tax accounts so try in test first).
Regards
Nadini

Customer Invoice should be displayed in S_ALR_87012174 - Customer Open item

Dear Friends:
My Client wants that the customer invoice should be displayed in the report S_ALR_87012174 - List of Customer Open Items.Is this possible,
If not, Any workaround solution will be highly appreciated.
Regards
msreddy

hi,
you can add fields to the open item list with "change layout" if the field with invoice-no. is not available you can copy it with fb09 (batch input) to zuonr or xblnr as Dave said. Change the existing interface too.
Andreas

Custom Screen doesn't display properly

I am on SRM 5.5 and I have created a custom screen with a custom field in all the proper structures it's supposed to be in. The screen has been generated into HTML and it has a service. I am calling the screen in the BADI BBP_CUF_BADI. The field is showing properly, but my problem is that my custom screen is not displaying where I expect. If I generate the HTML template as a type classic, it doubles my fields when it displays and it shows them at the top of the header above all the other standard fields.
If I create my HTML template as WEBGUI, it covers the entire Header section and displays partly at the top over the standard buttons on the screen and partly at the bottom after the last header field. I presume the custom screen should display after the last header field. Does anyone know why the screens behave differently when I generate the templates as Classic (shows twice) versus WEBGUI and does anyone know what I might be doing wrong?
Points will be rewarded.
Thanks,
Marty

Hi
There seems like a bug in the SRM system...
Have you created a bespoke service in this case ? Please give some more insights in next reply ?
Meanwhile, go through the links which might help ->
Contract Custom fields are not showing
Re: New Tab in Bid Process Screen
Re: New screen with table control information in Process Bid Invitation
BBP_CUF_BADI_2
Regards
- Atul

Custom ContextMenu doesn't display when using hand cursor

I have created a custom ContextMenu, which displays when
right-clicking on the Canvas. If I am showing the hand/pointer
cursor using the code below, and then right-click, the custom
ContextMenu is not displayed. Is this a known issue in Flex 3 or is
there a workaround/fix? Any help is always much appreciated.

"Guddie" <[email protected]> wrote in
message
news:gmcq28$eb$[email protected]..
> Setting buttonMode = false or mouseChildren = true does
not fix the issue,
> and I do need useHandCursor = true.
Make sure you haven't inadvertently set mouseEvents to false.

Sharepoint 2013 custom search results grouping display template

Hi,
I am trying to implement custom grouping for search result items. I would like to group them by a managed property, but without using result blocks (query rules). The idea is to sort the results by the property and then compare the current item (ctx.CurrentItem)
with the previous item using ctx.CurrentItem.ParentTableReference. If a new property value is detected we insert a new 'group header' (just some simple html). The problem is the ParentTableReference is undefined. Shouldn't there be such a property in current
item object?
I'm implementing this in a custom search result item display template...
Thanks in advance.

Hi,
According to your post, my understanding is that you want to customize search result items display template.
I suggest you get enumerate all properties of JavaScript context object and debug you code to watch the
ctx.CurrentItem object.
The following articles for your reference:
Debugging Display Templates in SharePoint 2013 Search
http://powersearching.wordpress.com/2013/01/25/debugging-display-temlates-in-sharepoint-2013-search/
Enumerate all properties of JavaScript context object in display templates in SharePoint 2013
http://sadomovalex.blogspot.co.uk/2013/06/enumerate-all-properties-of-javascript.html
How to Define a Custom Group Display Template (GroupTemplateId) for the Search Results WebPart via JavaScript
http://www.eliostruyf.com/how-to-define-a-custom-group-display-template-for-the-search-results-webpart-via-javascript/
Creating customized search results in SharePoint 2013
http://www.abelsolutions.com/totm/creating-customized-search-results-in-sharepoint-2013/
Best Regards
Dennis Guo
TechNet Community Support

HT2434 How do I get my custom linux software to display at 1280x1024 on my iMac under Parallels? and stay that way when I reboot?

How do I get my custom linux software to display at 1280x1024 on my iMac under Parallels? and stay that way when I reboot?

Interesting. Comes with? you didn't have either before? Paragon is commercial and is now v. 10.0, they were the only one keeping updated and was supporting 10.7.4. I would not enable more than one.
For writing to HFS Paragon has theirs but probably give the nod to MacDrive there.
I never do an upgrade to a new OS over the old system, I backup (clone) and format the drive with the new OS and do the install so whatever is there I know is clean and also to keep from carrying around leftovers from years and systems past.
I would assme Paragon is limited. Try their site and knowledge base?
MacDrive
http://www.mediafour.com/updates/macdrive
Paragon HFS
http://www.paragon-software.com/home/hfs-windows/
Paragon NTFS
http://www.macupdate.com/app/mac/26288/ntfs-for-mac-os-x
http://www.paragon-software.com/home/ntfs-mac/

Custom table can be displayed and not maintainable using SE16n.

Hi Gurus,
I have created a custom table with DATA BROWSER/TABLE VIEW MAINT. equal to 'N' (Display/Maintainance not allowed) in SAP ECC 6. The the requirment is, this custom table can be displayed using the transaction SE16n.
This requirement is existing in ECC 5. with same setting DATA BROWSER/TABLE VIEW MAINT. equal to 'N' (Display/Maintainance not allowed) and this table can be viewed using transaction SE16n.
would there be possible that this requirement be implemented in SAP ECC6? would this be due to the version?
Please help.
Thank you..
Regards,
SAI

Hi Kiran,
Thanks for your answer but unfortunately this is not what I'm looking for. Iam also familiar with &SAP_EDIT.
Well, my problem is, the custom table setting Data browser/Table view Maint. is set to "N Display / Maintainance not Allowed" ( under Delivery and Maintainance Tab). Also there is no table maintainance generator setup.
So basically with this setting, in transaction SE11 'Contents' is disabled. And with transaction SE16n, when you execute and tried to view the table, error "You cannot display zcustom_table with standard tool". (checkboxs are hidden)
What the requirement is looking, the custom table can be viewed (this is with the same setting above but can be viewed using SE16n and the checkbox maintain entries is automatically tick but when executed "auth failed" so, basically to view the entries, untick the checkbox then entries can now be viewed.)

Hiding customer container in first display

Hello all,
How to hide custom container during first display of screen. Loop at screen at PBO does not work as screen name field does not capture container name.
Regards,
DPM

Hi,
    It is not possible to hide the custom container in dynpro , if you can brief your requirement will try to help
    you out.
    Instead of hiding you can use an empty subscreen and navigate to it before displaying actual screen with
    the custom container.

Generic custom control that can display an image or swf?

Hi,
I want to create a custom control that can take an image or swf as an argument and display it in the same way.
If the programmer uses this control (which essentially is a button with custom display) I want him to be able to just state the source and the text that is to be shown. Like this:
   <myControls:myButtonControl descriptionText="swf object" symbolObject="{Application.application.shape01swf}">
or
   <myControls:myButtonControl descriptionText="img object" symbolObject="{Application.application.shape01img}">
where shape01swf and shape01swf are embeded objects as follows:
   [Embed("../assets/swf/Shape01.swf")]
    public var shape01swf:Class;
   [Embed("../assets/images/Shape01img.jpg")]
   public var shape01img:Class;
Which kind of object should I create in my custom control that can display this?
Right now I have created a Class that extends VBox so that I can display the image/swf above the descriptionText.
(I am using Flex 3.)

Aha, so the Image control can use an swf as a source as well?
I just assumed that it could not and I would have to use the SWFLoader to do it.
So, this is my solution:
        override protected function createChildren():void{
            iconField = new Image();
            addChild(DisplayObject(iconField));
            textField = new Text();
            addChild(DisplayObject(textField));
            super.createChildren();
        private function init(e:Event):void{
            iconField.source = symbolObject;
            textField.text = descriptionText;
Thanks!

Needed Custom logo to be displayed in Form Menu bar

How do you change the Oracle logo on the right hand side of the Oracle Applications
menu(11.5.10)
Needed Custom logo to be displayed in Form Menu bar

Refer to the following notes:
[Note: 119319.1 - How to Replace Oracle Logo with Company Logo on Applications 11i Sign-On Screen|https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=119319.1]
[Note: 404381.1 - How To Make Simple Custom Changes To The JTFLOGIN Page|https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=404381.1]
[Note: 395663.1 - How to change the Corporate Branding Image System Wide in the E-business Suite|https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=395663.1]

Additional Field(customized) in G/L acct bal line item display FS10N-FBL3N

Steps done:
1st: I appended an extra field(customized) to RFPOS and RFPOSX structures.
2nd: Went to FIBF and looked for BTE applicable and found sample_interface_00001650. (Line item display: Add data per line)
3rd. I copied sample_interface_00001650 with a name of zsample_interface_00001650 and added line of codes for selection to fill the extra field I added.
4th. I assigned the event found in FIBF=>Environment=>P/S Modules=>of a SAP application.
5th. I executed RFPOSXEXTEND program in SE38. After running, RFPOSXEXT was updated but not RFPOSEXT.
I run FS10N and check for the field I added if existing. The extra field is existing however when I tried to move the field to the columns to be displayed in ALV, I got an error saying that there are inconsistencies in table T021S and RFPOSEXT.
Please help. Thanks.
Is there a certain program needed to update RFPOSEXT just like RFPOSXEXTEND for RFPOSXEXT?

Hi ,
Actually when i do FS10N or FBL3N to see G/L Account Line Item Display i am able to see the display of the G/L Account but there is a coloumn under Assignment and it shows no entries i.e. Assignment coloumn is blank.What should i do so that i get entries for assignment field because there are entries made in Assignment field.Table is BSEG and the field is ZUONR.How do i get these entries in the G/L Account Line item display for G/L Account using FS10N ?
Thanks
Vivek

Customer No./ to be displayed in FBL3N

Similar Messages

Maybe you are looking for