Customer Notes using abap Query

HI Experts,
Can any body suggest me abap query for extracting customer notes?? I have to go thru only this option.
the text i am supposed to extract is here.......VA42 > goto>header>texts> completion notes ..
READ_TEXT is not a solution for me...i need only ABAP Query..
thanks
sony
Edited by: sony on Jan 6, 2009 1:32 PM

hi jay,
thanks for ur reply..but as mentioned read_text is not a solution..
thanks
sony
Edited by: sony on Jan 6, 2009 1:43 PM

Similar Messages

Generating a report using ABAP query

Hi All,
I want to generate a anlytical report using ABAP query, There are 3 different transactions/steps have to be executed to get this data in an actionable form.
1. MB52 - Unrestricted Stock
2. ZCustomquery - Custom query in SAP R3
3. Combine above two in a single report.
Please suggest me how can i proceed,
1. Example i have created query name called Finalrepot
2. How can i call above zcustomquery and Transaction (MB52) in the Query.
Thanks for your help
Pradeep

Hi,
Check below link to create ABAP query (SAP Query)
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Create_The_Query.asp
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVQUE/BCSRVQUE.pdf
Best regards,
Brijesh

How to add the fields to the transaction 'Z10SD25' using ABAP Query

Hello,
I want to add the new fields like 'From' and 'To' depending on some conditiions. But i have to do this using ABAP Query.
Can any one help me with this as I am not much aware of ABAP Query .
Regards,
Darshana

Hi,
ABAP/4 query can be designed in four steps
1.     Creation of a user group
2.     Creation of Infoset
3.     Assignment of user group to Infoset
4.     Creation of the query based on Infoset
By executing the transaction codes mentioned below
u2022     SQ01   ABAP/4 Query
u2022     SQ02   Infosets
u2022     SQ03   User group
Step 1: To create an Infoset without a logical database
One of the following can be selected
u2022     Based on a single table
u2022     Using an ABAP/4 program
u2022     Using Table Joins
u2022     Using Sequential Dataset
NOTE: The tables to be used in the join should have at least one field in common i.e. it should have the same name, domain or data element.
Step 2: Here you specify the users who should be authorized to run the query. A user group is always associated with a Infoset.
Step 3: In Query Definition you can define the Selections Screen. Here you can check against the fields(fields from the tables specified in the infoset above) that you require to be shown on the selection screen.
Now we Finally need to specify the output type for the query as Basic List, Statistics or Ranked List. Choose the option Basic List and also select the fields to be displayed in the output list(in your case from and to fields...)
After providing all the above options you can save the query and execute it by clicking the Execute button twice.
Hope this helps
Regards
Shiva
Edited by: Shiva Kumar Tirumalasetty on Sep 15, 2009 12:44 PM

Programs generated using ABAP query vanishes after upgrade

Hi all,
The programs generated using abap query in sq01 vanishes after upgrading from 4.6C to ECC 6.0 system.
Is this a know issue, do we have a solution for this?
Can anyone help
Thanks
Senthil

Hi,
Try to generate the Queries again in the new system...using the FM : RSAQ_GENERATE_PROGRAM
The input needed is the Query name and the usergroup...The details can be obtained from the table AQLQCAT(local queries areas) and AQGQCAT(global areas queries).
Once you generate the query , a program gets created...
if you have lots of queries to be genretated, write a custom report by fetching the data from the above tables and use the FM to generate the same...
Hope this helps you..
Reward if useful
Regards
Shiva

Extraction using ABAP Query

Hi Experts,
I have a data source in which the extraction is using ABAP Query. From RSA2 I got the infoset name. I would like to know if the extraction logic is put inside this infoset. If so how to see the extractor ouput in R/3 and how to debugg the infoset. I can't put break point in infoset. I tried to debugg the extractor through rsa3 and it is not going to the infoset also.
Please help me as I don't have any experience in BI.
Thanks,
Soumya.

Hi Soumya,
Infosets are similar to views created on different tables by linking them with one another. So instead of debugging one should look for how this tables have been linked in tcode SQ01.
Hope that helps.
Regards
Mr Kapadia

Self join using ABAP Query

Hello all,
How to create a self join using ABAP Query?
Say, I have this table EKBE with belnr (materials doc num) and lfbnr (reference material doc num). I have to pick the PO's from EKBE whose belnr doesnt have any lfbnr.
Regards
Madhumathi A

hi madhu,
tables : ekbe.
data itab like standard table of ekbe with header line.
select * from ekbe into table itab where belnr >< 0 and lfbnr = ' '.
loop at itab.
write :/ itab-belnr,itab-lfbnr.
endloop.
check this code this works to select the orders whose belnr doesnt have any lfbnr
reward points if useful.

Development of Reports using ABAP Query

Hi
can anyone please tell me about 'Development of Reports using ABAP Query' and how to use it in real time
Thanks
jay

look here:
http://help.sap.com/saphelp_47x200/helpdata/en/b7/26ddebb1f311d295f40000e82de14a/frameset.htm
A.

Interactive reports using ABAP query

I have developed an ABAP query which prints the sales documents in ALV list display.
In that list display I would do develop a functionality is , when ever i double click on the sales doc number it will directly go to the VA03 transaction for the corresponding VBELN.
Can anybody explain how to do this?

Hi,
When you double-click on any cell of alv, use this code to fetch the data of the line that you currently clicked, its working:-
When you double click on the ALV line, you will have sy-ucomm = '&IC1'.
So when you define a i_callback_user_command for the FM reuse_alv_list_display,
     i_callback_user_command           = 'COMMAND' " for User-Command
and create it as:-
FORM command USING ucomm LIKE sy-ucomm selfield TYPE slis_selfield.
DATA : ok_code TYPE sy-ucomm.
ok_code = ucomm.
CASE ok_code.
    WHEN '&IC1'. "for double click on alv line
      " your code
ENDCASE.
ENDFORM.
As you have used selfield TYPE slis_selfield, the field selfield will hold all the values.
To know on which row you have clicked and to retain that line, use code:-
Suppose you are currently displaying data from internal table itab and corresponding to it you have work area wa.
read table itab into wa index selfield-tabindex. "index value of line you clicked
" now you have the contents of line that you double clicked currently
Now to know the field name that you clicked, use:-
selfield-fieldname " will fetch you the name of field that you clicked
Now using the work-area and the name of field that you clicked, you can easily make out the details of the field i.e., field name and field value and you can code as per your requirement.
Refer:-
CASE selfield-fieldname.
WHEN 'VBELN'.
    SET PARAMETER ID 'AUN' FIELD <wa-vbeln>. "value for work area for vbeln
    CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
ENDCASE.
Hope this helps you.
Regards,
Tarun

Working with Custom SQL Using Descriptor Query Manager Queries

Hi All,
I am Working on Descriptor Query Manager Queries
Configuring Custom SQL Using Java and Workbench
Using Java I wrote a static method as in the code given below.
public static void insertEmployee(ClassDescriptor descriptor){
descriptor.getQueryManager().setInsertSQLString(
"insert into EMPLOYEE (EMP_ID, EMP_NAME, EMP_JOB, SAL, DEPTNO) values (#EMP_ID, #EMP_NAME, #EMP_JOB, #SAL, #DEPTNO)"
I wrote a insert SQL Query in the custom SQL tab of the Toplink workbench .
Using java and Using Toplink Workbench I had a problem how to call this insert query in the sessionEJBBean .
Can any one suggest me in this regard.
Thanks in advance
regards,
Satish

What is the problem you are experiencing?
Normally you can just execute the query by calling
'executeQuery(queryName, domainclass) on the session.
See also
http://www.oracle.com/technology/products/ias/toplink/
doc/10131/main/_html/qrybas003.htm#BCFIBGGJ
Just out of curiosity: why do you need a custom SQL
to insert something? Can't you use persist()?
regards,
LonnekeOr even UnitOfWork ? Why go down the route of using custom inserts to insert objects unless you have some business logic that Toplink's UnitOfWork API cannot provide ?

Variable not used in query

HI
I am making a query in which I am using a variable 'Zfiscper' in calcualting a formula variable. but while running , it displays an error message - 'zfiscper' not BEing used in query.
Can ne one tell y this msg is comin??

Hi i know how to use char as a KF in the report but i am asking did use the Fisyear varaible in the formula with replacement path??? It id not possible to do so. Just try to drag that fiscal year variable in the report and excute the querry.
If not possible by doing so then just drag the fiscal year in the rows. And run the querry.
Khaja

Hoe top create summary and detail report using ABAP QUERY

Hi ,
Can any one suggest me how to create summary and detailed report using ABAP Quey.
Regards,
Raghu.

Hi,
Table Declaration
tables:mara,mast.
*Declaring the internal table
data: begin of itab_new occurs 0,
      matnr like mara-matnr,     "Material No
      ernam like mara-ernam,     "Material Created by
      mtart like mara-mtart,     "Material Type
      matkl like mara-matkl,     "Material Desc
      werks like mast-werks,     "Plant
      aenam like mast-aenam,     "BOM created
      stlal like mast-stlal,     "Alternative BOM
      end of itab_new.
select-options: p_matnr for mara-matnr.
CODE A : Retrieving the data from the database
     select f~matnr f~ernam f~mtart f~matkl m~werks m~aenam m~stlal
     into table itab_new
     from mara as f inner join mast as m
     on f~matnr = m~matnr
     where f~matnr in p_matnr.
CODE B : Retrieving the data from the database.
    SELECT FMATNR FERNAM FMTART FMATKL MWERKS MAENAM M~STLAL
    INTO TABLE ITAB_NEW
    FROM MARA AS F INNER JOIN MAST AS M
    ON FMATNR = MMATNR
    WHERE F~MATNR = P_MATNR.
    SORT ITAB_NEW BY ERNAM.
loop at itab_new.
write:/5 itab_new-matnr,itab_new-ernam,itab_new-mtart,itab_new-matkl,itab_new-werks,itab_new-aenam,itab_new-stlal.
endloop.
*TABLES: MARA , MAST.
*DATA:BEGIN OF ITAB_NEW OCCURS 0,
             MATNR LIKE MARA-MATNR,
             ERNAM LIKE MARA-ERNAM,
             MTART LIKE MARA-MTART,
             MATKL LIKE MARA-MATKL,
             END OF ITAB_NEW.
   SELECT MATNR ERNAM MTART MATKL
   INTO TABLE ITAB_NEW
   FROM MARA
   WHERE MTART = 'T'
   ORDER BY MATNR ERNAM MTART MATKL.
*DATA: BEGIN OF ITAB OCCURS 0,
     MATNR LIKE MARA-MATNR,
     END OF ITAB.
Thank U,
Jay....

Excess Inventory/Scheduled Receipts Report using ABAP Query.

Hi All,
I want to create a ABAP query for Excess inventory & Scheduled receipts in a single report. I have identified tables, fields and some extra calculated fields in the report. Here are the following tables and fields.
EKPO-MATNR      ( Material number)
EKPO-WERKS     ( Plant)
MAKT-MAKTX       (Material Discription)
MARC-MAABC      ( ABC indicator)
LFA1-NAME1        ( Supplier name)
MBEW-STPRS      (Total value)
EKET-EINDT         ( Item delivery date)
RIBOF-AMOUNT
S939-SPWOC or S032-SPWOC
Calculation fields : Value execess this week.extend value, over or under this week, onhand inventory for last week and this week.
Here my question is, when i was creating a infoset, how do i maintain relationship or joins from one table to another table...Is there any sequence for the above tables? Pl suggest. When i was adding all the tables in a infoset and try join the tables...it says illegal join...
Pl suggest me.
Thanks for your help
PRadeep
Edited by: Venkata Pr Papulugari on Jul 18, 2008 1:37 AM

Hi Gordon,
What i need to display is the remainder of the transaction that was received... if it is zero (0), i don't want to display it.
i.e.
transact # 100 inqty = 5
transact # 200 outqty =1
I'd like to display
transact # 100     qty on hand = 4
right know the transaction # that i am displaying is transact # 200.
And also, it needs to be warehouse oriented. because i can have multiple warehose transactions.... and i am getting that wrong too.
Regards,
Manuel Roman

Calling a custom tcode using abap class from workflow

Hi Experts,
I have a requirement of calling a custom tcode from my workflow.
For this i have created a class zcl_test ( has if_workflow ) .
I created a method ztest which will call the tcode.
CALL TRANSACTION 'ZTX'. ( My tcode just has 1 input field, for testing purpose )
Then i created a task in whichi hv used this abap class and method.
But the tcode does not run when i execute the workflow.
Please help.
Thank You,
Radhika Vadher.

Radhika Vadher
use the sample code to get the data from the task container into the ABAP class
DATA :
         w_ref        TYPE REF TO      if_swf_run_wim_internal,
         w_ref_cnt TYPE REF TO      if_wapi_workitem_context,
          w_wi_ref   TYPE REF TO      if_swf_ifs_parameter_container.
TRY.
    CALL METHOD cl_swf_run_wim_factory=>find_by_wiid
      EXPORTING
        im_wiid     = w_wiid
      RECEIVING
        re_instance = w_ref.
CATCH cx_swf_run_wim_enq_failed .
CATCH cx_swf_run_wim_read_failed .
CATCH cx_swf_run_wim .
ENDTRY.
CALL METHOD w_ref->get_workitem_context
RECEIVING
    re_ctx = w_ref_cnt.
CALL METHOD w_ref_cnt->get_wi_container
RECEIVING
    re_container = w_wi_ref.
and the w_wi_ref is having a method GET use that method to get the values of the task container into the ABAP class.

Creation of Program using ABAP Query (SQ01)

Hi All,
I have a program called "AQL4FI==========INVOICE_CHECK=" in my 4.6 server but a similar program doesnot exist in ECC.
From the name, it looks like a program created using SQ01.
Can anyone please help as to how to create the same program in ECC using SQ01 by looking at the program in 4.6?
Please help.
Helpful answers will be fully rewarded.
Thanks a ton.
Naba

First thing is this is not the way to convert the SAP Query to Report.
First check that how many table in your query they have used.To check this if you go in SQ02 press display button left side you can see the tables.To check the fields selecting from tables check in field groups.
In record processing check are there any conditions are there.
Now wrire a select statement by joing all tables which you found above and in this select statement extract all fields which you found in field group into one internal table .Here you give the selection screen fields as condition fields in select statement.If you found any conditions in record processing event ,Loop that internal table and check the conditions or modifications.
If you need more help let me know.
Pls. reward points for helpful answers
Thanks
Murali Poli

Answers shows error for table that is not used in query

Hi,
I have two fact tables, both share one common dimension and also have other dimensions. For simplicity let's assume there are only two dimensions for each fact: Dim1 and Dim2 have joins to Fact1 and Dim2 and Dim3 joins to Fact2. (Dim2 is joined to both).
When I query in answers aggregated data from Dim2, Fact1 and Fact2 everything is ok. When I query data from Dim2 and only Fact1 also everything looks fine, however when I query data from Dim1 and Fact1 I get error about Fact2
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 15018] Incorrectly defined logical table source (for fact table fakti - Grāmatojumu rindas) does not contain mapping for [dim - Piegādātājs.Hansa kods]. (HY000)
SQL Issued: SELECT "dim - Piegādātājs"."Hansa kods" saw_0, "fakti - Piegādātāju rēķinu rindas"."Summa ar PVN (LVL)" saw_1 FROM "Kreditori single source" ORDER BY saw_0
As you can see table "fakti - Grāmatojumu rindas" is even not shown in SQL Issued.
One more thing - if I first query data from Dim1, Dim2 and Fact1, look at results and afterwards delete Dim2 (leaving Dim1 and Fact1) then query returns data without error.
Must be that error is in Business Layer, but I have no idea what should I do to correct it.

Sveiks!
I am not really sure what could have caused this. And, obviously, rebuilding the repository helped.
It seems you could get it to work if you queried dim1, dim2 and fact and then removed dim2 (like you said). So, that suggests something almost on the order of a glitch or, possibly, a bug. The fact that simply rebuilding the repository helped seems to support my glitch hunch, but I am not really sure.
I am relatively new to this product, and the only thing I can suggest as far as business model goes is to pay attention to any warnings when you do "Check Global Consistency". Sometimes, things work even with warnings, but you might encounter strange problems down the line.
-sb

Customer Notes using abap Query

Similar Messages

Maybe you are looking for