Customer order unit - EDI inbound and outbound sales documents

Is there a standard method to store a customer's order unit of measure?

Standard set-up assumes seller dictates sales order unit per material.

Similar Messages

MM06E001 User exits for EDI inbound and outbound purchasing documents

Hi
I am using enhancement MM06E001 to transfer PO data
via idoc type      ORDERS05.
I am creating PO via transaction ME21N.When ever i save the PO the data should go via this IDOC type
When we create PO the Standard long text data maintained at header level is tranferred via Segment E1EDKT1 and E1EDKT2.
The issue is that at header level i have created new PO header text.
This new PO header text data is not identified in this enhancement
thats why i am not able to send this data via
idoc using enhancement MM06E001.
Kindly help me on how to pass the text data using Idoc
via enhancement MM06E001.
Thanks & Regards,
Chetan

Hello,
         I believe you are writing the Code in the Exit EXIT_SAPLEINM_002 in which you are manually populating the Header Text while it is not required for the Standard Segments like E1EDKT1 & E1EDKT2. If there is any Text maintained in the PO, it will be automatically populated in the Header Segment E1EDKT1 & E1EDKT2.
        Put a Break Point in this Customer Function and check if the Data is already being filled into these Segments in the Table INT_EDIDD.
Thanks and Regards,
Venkat Phani Prasad Konduri

Sharing Handling Units between Inbound and Outbound Delveries?

Hello-
I could use some guidance with how to best setup a handling unit scenario for a Third Party Purchasing process.
1.) Sales Order for Third Party Purchased Material (Vended Finished Good) is created in ECC.
2.) Purchase Order is sent to supplier.
3.) Shipping Label is generated in SAP and is assigned a Handling Unit. Label is sent to supplier.
4.) Supplier affixes this label to product and ships it to our warehouse.
5.) Goods Receipt is performed via Purchase Order (MIGO).
6.) Warehousing activities and Post Goods Issue of Outbound Delivery are performed via this label and Handling Unit.
We would like to do a few new things with this process.
A.) We would like to have the supplier provide us with the HU on their ASNs and generate a Packed Inbound Delivery from it.
B.) We would like the same HU to eventually be associated with the Outbound Delivery to the end customer.
Is their a best practice to share a Handling Unit across an Inbound and Outbound Delivery?
Is EWM Cross Docking the best way to accomplish this?
Are there other proven approaches?
Thanks for your time and help.
-Ron

hi friend
Handling unit number for identity of packing materail , pallet material carrying the carton ,carton the carrying the material
like FG material and tray
identification number controlling the handling unit numbers.
with regards
dinesh

EMAIL inbound and outbound - Sales pro - urgent

Hello,
Our requirement is to reach out to the customer and also the email recieve, whether is it possible in Sales pro. i have seen in the navigation bar of SALES PRO standard workcenter EMAIL does this allow me to do inbound and outbound mails to the customer.
Is there any SAP help related to this, or any best practice to activiate this functionality.
do we also need to define reciepient address also via config.
Regards
AM

Hi,
http://help.sap.com/saap/sap_bp/bblibrary/Documentation/C4B_CRM701_BB_ConfigGuide_EN_XX.doc.
https://help.sap.com/saap/sap_bp/BBLibrary/Documentation/C20_CRM701_BB_ConfigGuide_EN_XX.doc.
pFA
Regards,
Sumeet

Need IDOC inbound and outbound programs

hi,
i am new to xi.
i want IDOCs , inbound and outbound / function module programs for PURCHASE ORDER
and GOODS RECEIPT.
ex: BD10 for material master (matmas01).
thanks and regards
v ijender

for purchase order.
ORDERS / ORDERS04
ORDCHG / ORDERS04
ORDRSP / ORDERS04
Programs
RBDMIDOC Creating IDoc Type from Change Pointers
RSEOUT00 Process all selected IDocs (EDI)
RBDAPP01 - Inbound Processing of IDocs Ready for Transfer
RSARFCEX - Execute Calls Not Yet Executed
RBDMOIND - Status Conversion with Successful tRFC Execution
RBDMANIN - Start error handling for non-posted IDocs
RBDSTATE - Send Audit Confirmations
FOr testing you can use WE19.
and also check the below link
http://www.erpgenie.com/sapedi/message_types_masterdata.htm
regards
kummari

SAP inbound and outbound delivey in single shipment document

Hi
We are doing outbound and inbound delivery creation in SAP. These are dropped to OTM(oracle transport management system). OTM will create orders for deliveries and groups multiple deliveries into one shipment. This is sent back to SAP for shipment creation. Problem we have is SAP can have either inbound deliveries Or outbound deliveires in a shipment. Based on inbound shipment or outbound shipment in shipment document type. OTM does not has this restriction and can bundle both outbound and inound in single shipment.
Business scenario we have is multi pick and multi drop, where there is possibility that 1) inbound del from vendor for PO 2) Outbound del to customer for SO and 3) outbound/inbound del for STO from RDC to DC in a single sipment.
Please advice ow this can be achieved in SAP.
Best Regards
Edited by: M.N. Phani Sai on Oct 28, 2010 10:34 AM

It is not possible to involve both inbound and outbound deliveries in the same shipment. SAP has its deficiencies...
http://sap.ittoolbox.com/groups/technical-functional/sap-log-wm/inbound-and-outbound-delivery-in-the-same-shipment-3512217
http://help.sap.com/saphelp_erp60/helpdata/en/f5/04898047bd11d2bf750000e8a7386f/frameset.htm
You cannot place outbound deliveries and inbound deliveries together in the same shipment document. Nor is it possible to assign Items from a delivery or an inbound delivery to different shipment documents. You must decide at the delivery stage whether order items can be shipped together in one delivery and therefore require only one shipment.
Edited by: Csaba Szommer on Oct 28, 2010 11:05 AM

Single Function module to create inbound and outbound delivery

Dear Frens,
   I would like to know how VL10A is creating a deliverty document in background mode.
   otherwise can anyone help me with a single function module or BAPI or BADI which creates both
   inbound and outbound delivery.
Regards
Priya

Hi,
Try FM RV_DELIVERY_CREATE or GN_DELIVERY_CREATE.
For creating a delivery wrt PO u 1st need to have a sales order i guess.
Regards,
Amit

ALE Inbound and Outbound programs

Hi,
Can someone tell me as to how we create the inbound and outbound programs for ALEs??And the cenerio where we use the std FMs and where we use the customs programs for the corresponding action?
Thanks,
Supriya Manik.

Hi,
Go thru this Book : Aravind Nagpal
go thru this links,
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400365
Idoc's
http://www.thespot4sap.com/Articles/SAP_ALE_IDOCS.asp
http://help.sap.com/saphelp_nw04/helpdata/en/12/83e03c19758e71e10000000a114084/content.htm (change pointer)
http://www.erphome.net/pdf/tech/J07.pdf#search=%22ALE%20Change%20pointers%22
http://www.****************/articles/ALE/IDOCExtension/IDOCExtension.htm
Thanks
Sunil

How to add Total Quantity in Inbound and Outbound Delivery screen

Hi,
I want to add Total quantity field in Inbound and Outbound Delivery screens.
In document flow i can see the line item quantities in ALV Format, but if i select Display the totals above the entry check box
in Change Layout--> Display, i didn't see any totals displayed.
Please help me on this?
Regards
Bhuvana

Hi
If the field is a customer field, see BADI 'LE_SHP_TAB_CUST_HEAD'
Regards
Eduardo

Seeking recommendations for handling large binary documents with security(preferable) for inbound and outbound scenarios from OSB- SOA and SOA- OSB

Hi,
I am currently working on a project with the following requirements
1. Client transfers binary document (between 1-20MB in size) from OSB proxy to SOA composite to Content Management system
2. Client retrieves binary document (between 1-20MB in size) from Content Management system to SOA composite to OSB proxy
In otherwords, a inbound and outbound integration.
What I have tried so far and my results:
Scenario A
1. Enabled MTOM on SOA composite by attaching wsmtom policy
2. Created an OSB business service and consumed the SOA composite application
3. Enabled MTOM on OSB proxy and business service and configured it to pass by reference
Scenario B
1. Enabled MTOM and security on SOA composite by attaching wsmtom policy and SAML policy
2. Created an OSB business service and consumed the SOA composite application
3. Enabled MTOM on OSB proxy and business service and configured it to pass by reference
I have a demo integration setup that writes a binary document to a file using the above steps. My SOA composite has a file adapter that writes the binary data to an external file and it is exposed as a web service with a simple WSDL definition that has an inline XSD schema with an single element of base64binary type. I have added a mediator that maps this base64binary element node to the file adapter's input node.
Result for Scenario A with file size less than 1 MB:
Flawless execution with sub-second response times
Result for Scenario A with file size of 8MB
First attempt: SOA composite faults with database transaction related error, solved by increasing JTA timeout
Second attempt: Flawless execution, but file transfer took over 100 seconds to complete. This is very poor performance and my suspicions are that this cannot be the expected behaviour, but I dont know the internal workings of the SOA composite and why its taking this long.
Result for Scenario B:
The OSB business service does not accept/recognize the SAML policy in the WSDL and suggests to configure OWSM policies manually, but OWSM policy in OSB does not have the wsmtom policy. Regardless of this, any permutation of MTOM + WSS security in this integration scenario either did not work outright or MTOM optimization was not happening ie binary data was materalizing in the message body.
I have only about 3 weeks left to implement a viable solution and the closest ive come to a solution is Scenario A but that +100 second response time for an 8MB file is really worrying.
I would appreciate any level of guidance, recommendations or suggestions as to how I go about tackling this problem.
Thanks
regards,
Johnny

I think this is due to the underlying mechanism of weblogic classloading..
You can contact oracle support @ https://support.oracle.com to report issues. Roughly this is the process .
1- get the Oracle Customer Support Identifier (CSI) for the client you are working for.
2- Create a user profile quoting the CSI. This will send an approval request to oracle support admins at your client.
3- Get the oracle support admins at your client site to approve your request for support access.
4-Once they approve , you can access the support site and raise service requests.

IDOC Inbound and Outbound

Please let me know How to handle IDOC inbound and Outbound preferably with example. I am new to it.

hi,
your question is very broad,
start reading continue from there...
<a href="http://help.sap.com/saphelp_46c/helpdata/en/19/3cf334c20ccc52e10000009b38f83b/frameset.htm">Doc Interface: EDI Application Scenarios (BC-SRV-EDI)</a>
<a href="http://help.sap.com/saphelp_46c/helpdata/en/dc/6b8a4943d711d1893e0000e8323c4f/frameset.htm">IDoc Interface / Electronic Data Interchange (BC-SRV-EDI)</a>
An example:
inter company invoiceing:
the SD invoice has an output type (INVOICE01) that sends an Idoc that creates the mm invoice (invoice verification)
for more data see the links above
good luck

Gl balance inbound and outbound

Hi sap gurus,
We are having legacy systems that should interact with sap.I need to know the following for the GL balances through inbound and outbound
1.How data will flow parallely into sap.what steps i have to follow to do this.
2.what user exits or idocs or interfaces i have to use.
3.how the GL balances data will trigger into sap.
Plz help.This is most urgent for me.
Thanks in advance
Kiranmayi

Hi Vijay,
I am assuming that you are asking about inbound and outbound process.
These process comes under SAP Electronic Data Interchange (EDI)
Outbound process--> When a document is sent from SAP system to any other system (to business partners say bank or vendors).
eg sending a quotation to vendor.
Steps:
1. Application doc is created
2. IDoc is generated
3. IDoc transferred from SAP to the Operating System layer
4. IDoc is converted to EDI standards
5. IDoc transmission to business partners
6. Status report sent to SAP system.
Inbound process is reverse of Outbound process-->When a document is sent from business partner to SAP system.
eg Bank sending account statement.
Steps:
1. EDI transmission received
2. EDI Doc is converted into IDoc
3. IDoc transferred to SAP layer
4. Appication document creation
5. View appliation doc.
ALE (Application Link Enabling) method uses tRFC (Transactional Remote Functional Call) port for communication and refer to same concept mostly.
Hope it helps.

Creating and Setting up web services for both inbound and outbound comms

Hi
I would like to know the process of setting up inbound and outbound web services using Siebel - is there a tech note /bookshelf article that can guide me through to setting up a 'new/custom' web service.
I have read up on bookshelf that both business services and workflows can be setup/exposed as web services. Now i would like to find out how to do this.
Any help appreciated.
Regards,
TS

As you begin to experiment with web services you should take a look at SoapUI. It is a freeware program that makes it a breeze to test both inbound an outbound web service calls. The bonus is that it can also be used to trace what HTTP is going back and forth along with giving you the ability to chain calls together. That is particularly useful for example if you are learning how to do web service calls within the context of a session. http://www.soapui.com/

In UCCE TCD table how to indentify inbound and outbound call records.

Hi
I'm using TCD table to build custom report. I would like to know is there any flag to differentiate Inbound and outbound call records in TCD table.
Please advice.. I would be much appreciated.
Thanks
Regards,
Param

Hi Geoff and David
Thanks you very much for your reply.
I have used "PeripheralID" to classify the call.
Thanks
Regards,
Param

Impact of inbound and outbound queue

Hi,
I have created the service request in CRM and replicated to r/3, what is the impact on inbound and outbound queue of R/3 and CRM server.
Thanks in advance

Hi
if the mb doc is passed to R3 ok if not you can come to know in smw01 if it gets bounced to crm you need to check for error analysis why bounced, if it get posted R3 inbound queue to r3 is succefull if get bounced back to crm the out bound of crm is failed then depending up on error analysis you should proceed in order to proceed further how to push the transaction to r3 by clearing the middlle ware struck up
CRM Impact is : succefully sent to r3 using mb docs by out bound quue
R3 : if gets bounced in bound quueue is failed to receive the CRM's out bound so you need to rectify in CRM only.
Reward for useful
Venkat

Customer order unit - EDI inbound and outbound sales documents

Similar Messages

Maybe you are looking for