Customer owned internet/voice equipment

I would like to provide my own cable modem for internet and voice. I found theDOCSIS Device Compatibility and Capability site for compatible cable modems and some with WiFi but what about phone service?All the cable modems I see have RJ-45 (ethernet) connections but no RJ-11 (phone) jacks. How do I connect my house phone lines to them? I appreciate your support. Vet-User

You need a telephony modem (also known as an eMTA)
The only modems you'll find at retail are the Arris TG862G and the TM722G. The TG862G is an all-in-one gateway device (modem/router/phone) and the TM722G is just modem/phone. The Arris TG862G is okay for use anywhere on Comcast system, the TM722G  may only be allowed in certain areas so you should call Comcast before purchasing a TM722G .
[Edit: What Bruce said below....forget the TM722G]

Similar Messages

  • How to get active customer owned equipment...

    Hi All,
                I am a fresher in ABAP and first time posting my query, My requirment is to fetch the equipment master data for only active customer owned equipment(ECUS as the only system status) . I tried searching the field 'status' from table 'JEST' but not able to understand the parameter for 'active custmer', no data is there as such 'ECUS'.
    Please asist me for the same.
    Thanks in advance,
    Atul

    Hi Atul,
    What you see in teh JEST table is the internal id for the status ECUS.  In case this status is internal (system status), check the table TJ02T to find the mapping of the internal id to the external representation (ECUS). In case ECUS is external (user), check table TJ30T.
    Use the ID to check in table JEST the status is active for the object in question.
    Kind regards,
    Robert.

  • Repair of customer owned equipment

    Hi SAP Experts
    Iu2019ve got a scenario which Iu2019m looking for an SAP solution for.
    Sales Org A repairs customer owned equipment on behalf of its customers. But the repair is carried out in Sales Org B, located in a different country. After the repairs, Sales Org B bills Sales Org A, and Sales Org A in turn bills the customer for the cost of the repair work. How will this be handled in SAP?
    Thanks

    The customer sends the goods directly to Sales Org B, in another country.
    Thanks

  • I do have wifi connection but no internet, how is this possible? I logged in to the internet at my friends place and when I got home my own internet was not working anymore

    I do have wifi connection but no internet, how is this possible? I logged in to the internet at my friends place and when I got home my own internet was not working anymore

    This is possible to be connected to WiFi but not internet.
    You connect to your modem/router via WiFi and whether it is connected to the internet or configured properly to route the internet to WiFi devices is a different story.
    Now if you've already reset your WiFi (try disabling and enabling) and perhaps even restarting your MBP
    Then make sure that your modem/router is connected to the internet.
    You can try any other device, lights on the modem/router or use Eth cable to test.
    Report back your findings.

  • How to set up Mail without own Internet account

    I stay at different homes, using their Internet connections to check my e-mail online. If I get e-mail via the Internet, using any available network, how can I set up Mail? Mail asks for my incoming and outgoing server, but I am using any available network. Can I use Mail at all without my own Internet account? What if I use the account of a family member or friend who has Internet at their residence?

    Well, you need a permanent email address somewhere to which all your email goes. You cannot use web mail addresses such as the free email accounts at Yahoo or Google because they are not accessible from Mail.
    If your parents have cable internet service from RoadRunner, for example, then they can authorize an email account for you. Your email address would be something like "[email protected]" You would set up the account as you would normally using the ingoing and outgoing mail servers provided.
    Now when you are at some other location on the internet you can retrieve your email by simply letting Mail fetch it from your email address. If you need to send email then you will need to provide the outgoing mail server address used by the internet mail system you are now using. You can add this as a second server so it's easy to switch between them when you need to.
    I suggest you look at Mail Help from Mail's Help menu where you can search for more information on configuring Mail.

  • Subcontracting with Customer Owned Stock

    Hi Guys
    We will have stock that is owned by a customer but stored on our premises and we will be using the Subcontracting PO Process to send away unserviceable items and get them refurbished to come back as servicable.
    We need the facility to do this with both normal stock AND Custiomer owned stock
    In my current scenario the only stock i have is customer owned (special stock cat B) and i want to create a Subcontracting PO AND an outbound delivery using the customer owned stock,
    Any help in how to do this would be appreciated
    Regards
    Frenchy

    Hello
    Please check the below SAP help documentation links on customer stock
    Subcontracting for Customer Stock - Inventory Management - SAP Library
    Customer Stock - Inventory Management - SAP Library
    I hope this helps.
    Thank you.

  • Has anyone seen the following on their WP? Message from webpage WARNING: Time Warner Cable Customer – Your Internet Explorer browser and  computer may be compromised by security threats. Call 844-600-6224 now for IMMEDIATE assistance.  OK

    Has anyone seen the following on their WP?
    Message from webpage
    WARNING: Time Warner Cable Customer –
    Your Internet Explorer browser and
    computer may be compromised by
    security threats. Call 844-600-6224 now for
    IMMEDIATE assistance.
    OK

    This sounds like a virus or malware program that has made its way onto your computer.  I would ensure you have the latest virus definitions on your computer and run a thorough (complete) scan of your system.  If this doesn't work, I would suggest  you use Microsoft's Malware Removal Tool.  You can download it at the link below.   Hope this helps.
    http://www.microsoft.com/security/pc-security/malware-removal.aspx

  • Update Customer number for an equipment

    Dear All,
    Can we update customer number for an equipment using any BAPI?
    Please Check T-Code IE02, Other tab.
    Thanks
    Amit

    Thanks Babu.
    Here is the error message and message #
    Serial number XXXX does not exist for material YYYYYY
    Message no. IS137
    Diagnosis
    The serial number that you have entered for the material does not exist in your system.
    System response
    Processing will not be continued.
    Procedure
    Enter a valid serial number.
    You can display the entries valid in your system by placing the cursor on the appropriate field and using the symbol for possible entries.
    Thanks and Regards

  • Subcontracting Process with Customer owned stock

    We are looking for SAP supported process where the customer sends us components along with a sales order for a finished good. The components have to be received into customer owned stock and will be used (for instance as part of the BOM) to produce the finished good ordered by the customer.
    Does anybody have a solution for this process within SAP?

    Hi,
    1. Define your customer materials (both component and finished product) as non valuated material, because these materials not effecting the our inventory.
    2. create Bom for finished product.
    3. Create sales order for service charges with reference to your customer PO.
    4. Receive the component from your customer through 501 E (with out po sales order specific).
    5. Create Production order with reference to sales order through MRP or manual.
    6. confirm the production order and receive the
    finished product.
    7. Delivery to customer as in normal sales process.
    8. Then create performa invoice or billing to your customer.
    You can follow the above process, if have any further quarry please let me know.
    Subrahmanayam

  • BADi used for creating customer own data in transaction me52n

    Hi experts,
    please any one tell me what is the procedure for creating or changing. How to get access for customer own data in transaction me52n. How to get authorization checks.
    thank you,
    regards
    vijay krishna

    Hi
      check this link.
    Name of Badi used with transaction ME52N
    Thanks
    Viquar Iqbal

  • Movement Type from Customer owned Stock back to Plant Stock

    Hi Guru's,
    Is there a Mov. Type that allows you to transfer from Customer owned Stock back to Plant Stock, without creating any FI Documents? Please help thanks in advance Carlo

    What is customer owned stock?
    from my point of view it is any stock that you and others sold to this customer. not in your system at all.
    If you want to get it back to your promises, then you have to create a customer return.
    The customer return goes into return stock, this does not create any financial postings.
    But if you transfer the retun stock into own stock, then you create an accounting doc with value (quantity * price / price unit)
    You cannot create stock for a valuated material without any financial document

  • Customer own condition tables

    Hello,
    we use customer own condition tables with the field VKBUR inside in R3. I have downloaded these tables on the basis of note 514952 and note 674538.
    But after the download the field SALES_OFFICE was not filled in CRM and CDB.
    We use CRM 5.0 SP5 on the CRM server.
    Best regards
      Wolfgang

    Hi,
    Then the only way is to impelment a Dataexchange badi and to modify the records to convert R/3 Sales office into CRM Sales Office Id.
    Use badi 'CRM_DATAEXCHG_BADI' and implement method
    'CRM_DATAEXCH_R3D_MBDOC_FILL'.
    Checkout the sample implementation 'CPE_DATAEXCHG_BADI' for more detail explanation on the dataexchange badi programming.
    Best Regards,
    Pratik Patel
    <b>Reward with Points!</b>
    <b>Reward with Points!</b>

  • How  to track non-valued customer owned inventory, including retained

    How  to track non-valued customer owned inventory, including retained samples

    Dear Paddy
    As for as inventory is concerned, you can track through MB51 where you can see customer code and delivery reference.
    In case of samples, if you have maintained a separate order type / billing type and raised commercial invoice, you can track through VF05 by selecting "Further selection criteria". 
    thanks
    G. Lakshmipathi

  • Customer consignment stock/ customer owned stock

    Hi
    Anyone who have a great idea how to handle customer owned stock, systemwise in SAP?
    If a serviceorder is required, and we need to settle this against the balance.
    Step by step.

    Why you are using 631, if u want a PGI , goods issue cust consignment use movement type 633 . The system will take your Stock CR and COGS + (maintain Gl acct for acct modifier VAX )
    regardzz

  • Does apple has its own internet? I have AT&T right now and its very expensive.

    Does apple has its own internet? I have AT&T right now and it is very expensive.

    Apple isn't an ISP.
    (72287)

Maybe you are looking for

  • A Tip for using EJB 3.0 with WebLogic Ant Tasks

    I started out writing this up as a problem, but then I found the answer so I'm, posting a tip instead. When I tried to write an EJB [stateless] using EJB 3.0 in my legacy Weblogic ear project I started getting this error: <pre> No EJBs found in the e

  • Kernel panic - mid 2010 macbook pro mar OX 10.9.3

    Trying to help a friend of a friend I have bought a macbook pro mid 2010 - mar OX 10.9 updated with kernel panic. I have decided not to take it to the apple store yet because of money issues, and I was wondering if I could manage this with some help.

  • Appraisal Document Selection - HAP_MAIN_DOCUMENT / RABAX_STATE error

    When selecting the appraisal document within the MSS view or ESS view the following error message comes up.  Error when processing your request The URL http://saperpdev.sw.schwans.net:8080/sap/bc/webdynpro/sap/hap_main_document was not called due to

  • Questions about T500

    Just received my new T500 a couple of days ago and really happy with so far. I went over it to make sure it had all the hardware I ordered with it. When running CPU-Z (http://www.cpuid.com/cpuz.php) the RAM is being reported as DDR2 but should be DDR

  • To retive data into a combobox using a dataprovider

    Hi guys, I am a bit new to flex so plz if anyone can help me on this I am trinying to populate a combobox with the a data provider in this way: <mx:ComboBox id="cboGroup" height="22" width="100" dataProvider="{httpEditPartyMaster.lastResult.result.ro