CUSTOMER_REL - Business partner not created; duplicate check on address

Hello Colleagues
I have a problem during CUSTOMER_REL replication from ERP to CRM.
In r3am1 object looks fine but in some BDoc following error appears:
Assignment person - address exists already
Message no. AM038
and the Business Partner for Contact Person is not created.
We are on:
SAP_ABA     701     0005     SAPKA70105     Cross-Application Component
SAP_BASIS     701     0005     SAPKB70105     SAP Basis Component
PI_BASIS     701     0005     SAPK-70105INPIBASIS     Basis Plug-In
ST-PI     2008_1_700     0001     SAPKITLRD1          SAP Solution Tools Plug-In
SAP_BS_FND701     0005     SAPK-70105INSAPBSFND     SAP Business Suite Foundation
SAP_BW     701     0005     SAPKW70105     SAP Business Warehouse
SAP_AP     700     0018     SAPKNA7018     SAP Application Platform
WEBCUIF     00     0005     SAPK-70005INWEBCUIF     SAP WEBCUIF 700
BBPCRM     700     0005     SAPKU70005     BBPCRM
BP-CRM70     700V1     0000               SAP Best Practices for CRM 7.0
BP-INSTASS     600V7     0000               SAP Best Practices Solution Builder
ST-A/PI     01L_CRM5700000               Application Servicetools for CRM 500 51
And have already applied
1394635
1396910
1397895
1410788
1438046
But it is seems problem lies on SAP_ABA as I have found note
1092089 - Business partner not created; duplicate check on address
which is valid for different BP role and
SAP_ABA 700
SAP_ABA 710 but not for our 701
Have you ever seen similar issue?
Thanks in advance
Michal

Hi Naresh,
Thanks for reply. Correction instructions from this note refer to METHOD MODIFY_CONP_ADDRES which doesn't exist in crm7.0.
I can see in CRM that contact person is replicated and is present in BUT000 but table BUT052 is empty for this contact.
What is more we have implemented in our CRM note 564538 To change Contact Persons grouping replicated from ECC to CRM.
But also have: Note 757955 - Incompatible change concerning CRMC_BUT_CALL_FU.
We checked as well
Note 609766 - Correction of BP GUIDS in CRMM_BUT_CUSTNO, BUT000, CRMKUNNR
Note 836353 and run reports to find inconsistencies in tables BUT052, BUT051, ADCP and ADRVP. However no inconsistencies were found.
Thanks in advance if you have any other idea.
Cheers,
Michal

Similar Messages

Business partner not created in SRM in HR-SRM integration

Hi All,
We are setting up SRM HR integration set up with ALE idocs message type.
I ve done configuration as per guide available in SAP.Setting up parnter profiles,maintaining message types in both the systems ,mainyaining entries in tavle T77S0 for HRALX , maintaining filters in distribution model in BD64. When I start replicating the data using PFAL in R/3 ,the idocs triggered are green in both R/3 and SRM for org units ,Postions and also Persons.
Still i dont see BP created for most of the employees.Only few are getting craeted.When I check the log in SLG1 it says Marital status could not be converted.
I maintained all entries as per the entries available in R/3 in SPRO-Cross application components- SAP Business Partner-Business partners-Natural Persons-Maintain Marital status . Still i rceive the same error in SLG1 and BP is not getting craeted with idoc in green in SRM.
CAn any one please help.
Thanks in advance,
Sheetal

Hi
On SRM side using WE05 transaction see the failed IDOC's to get the complete details of the error. As you are saying that some of the users are successfully replicated issue may be on the ECC side HR info type relation ship missing. Ask your HR team to check the same.
On ECC side check table HRP1001 to see the difference between the successully replcaited users and one which failed.
with regards
Manjunath

Business partner not created when User is intergrated in SRM org Structure

Hi SRM gurus,
A new users in integrated into the SRM org structure thro Z tcode ,business partner is not created.
the user is not able to create shopping cart.
When we try to check for t.code:BBP_BP_OM_INTEGRATE we are getting this error"
Connection of object us XXXXXX to object u2018CPu2019 is not unique"
how to resolve this error.
Regards
G.Ganesh kumar

Hi all,
1) I have checked the SLG1 -No error log is found
2) In the basic tab there is no details to enter.
I am getting this error"Missing Authorisation : info type 1001 ,object type BP,Subtype A207".
since it is Production system -can we run run PFAL directly
G.Ganesh Kumar

Business partner not created in FSCM

Hi,
I have a problem where in creating customer master data in FI creates a business partner in FSCM for all the payers except in the case when partner functions(sold-to, ship-to) on the sales area tab of the customer master record are populated. I do not know why this is the case - why would partner function fields on the customer master record break the automatic creation of business partner in FSCM?
Helpful answers would be rewarded.

Hi
We dont have any problem by entering the Industry field in the customer master for the creation of the business parter for FSCM. May be you need to check what are the parameters that will be passed on for creating a business partner from the customer master.
Thanks
Ashok

Business Partner not created

I'm sending a message from XI to CRM using the proxy "ABABusinessPartnerIn".
There are no error messages . However the Business Partner is not created.
How do I troubleshoot this issue ?

Manoj,
In CRM execute SPROXY, and select your interface. Under menu item PROXY->Test Interface, you'll be able to execute the proxy interface in debug mode. You'll need to download your message payload to test with. Also, there's a how-to guide "How to debug XI applications" available on the SDN at this link https://www.sdn.sap.com/irj/sdn/howtoguides?rid=/webcontent/uuid/dd0326a7-0d01-0010-f690-b94802b06c8a. [original link is broken]
Leo

Business Partner not created via MDS_LOAD_COCKPIT

Hi,
I have a question. It seems to our customer are not being replicated when I run the Sync Cockpit.
I have checked all config:
Config for BP<-> Cust
Number ranges, groupings, roles, PPO active, Cust integration etc. It all seems the same in the config client. We had some Master data in the config client and i tried it there and i works but in my unit testing client it seems not to work.
I am not getting a message anymore in MDS_PPO2 so i am kinda lost.
Any ideas where i can check. I looked on this forum and don't find a similar issue.
Thanks,
Richard

hi
i have a big problem during using mds_load_cockpit
when i click on product category->material group and un select backround proccess and execute the transaction i have terminated in program
Category               ABAP Programming Error
Runtime Errors         MESSAGE_TYPE_X
ABAP Program           SAPLMDS_LOAD_BRIDGES
Application Component AP-MD-BF-SYN
Date and Time          10.06.2014 09:39:47
Short text
     The current application triggered a termination with a short dump.
What happened?
     The current application program detected a situation which really
     should not occur. Therefore, a termination with a short dump was
     triggered on purpose by the key word MESSAGE (type X).
Error analysis
     Short text of error message:
     Long text of error message:
     Technical information about the message:
     Message class....... "MSI_PRODCAT_CUST"
     Number.............. 303
     Variable 1.......... 1
     Variable 2.......... 432339
     Variable 3.......... " "
     Variable 4.......... " "

Business Partner not created in PPOMA_BBP

Hi this is for a new implementation where we are trying to Setup IDES for the initial training... The problem is - system is not showing any BP for the objects in the Org Structure. Tried running BBP_BP_OM_INTEGRATE too but no results. There is no descrepancy with the Area Code or Postal Code as well...
Can anyone pls suggest what else to check.
Regards
--Vikas

Hi,
Please enter only these field in the ADDRESS TAB of SRM Org Structure, for getting BP.
1) Sub Type.
2) City.
3) Country.
4) Region.
It will work.
All the best.
Please award the points if it helps.
BR,
Vijay Mittal

BUT000 partner not created via function 'BAPI_BPCONSUMER_CREATE'

Dear all,
Hope you can help me. In a batch job we create business partners via function 'BAPI_BPCONSUMER_CREATE'. When the creation is succesfull the partner_number can be found in table BUT000. <u>Sometimes</u> however function 'BAPI_BPCONSUMER_CREATE' has been executed correctly (this means no errors/warnings in table 'ret') the partner_number is not present in the BUT000 table although the function 'BAPI_TRANSACTION_COMMIT' has been executed.
When I check the BUT000 table afterwards there is a gap in the partner number numbering. You can see the abap code below.
Has anyone seen this before? Thank you in advance for your help.
With kind regards,
Simon Tol, Bose IS
    CLEAR partner_number.
    CALL FUNCTION 'BAPI_BPCONSUMER_CREATE'
      EXPORTING
        partner_group               = 'Z001'
        partner_category            = '1'
        partner_central_data        = bupa_central
        central_data_person         = cpperson
        partner_addr                = cpaddress
        duplicate_message_type_addr = 'S'
      IMPORTING
        businesspartner             = partner_number
      TABLES
        partner_tel_addr            = cpadtel
        partner_fax_addr            = cpadfax
        partner_email_addr          = cpadsmtp
        return                      = ret.
    LOOP AT ret WHERE type = 'E' OR type = 'A'.
      PERFORM make_message USING 'I' ret-id ret-number ret-message_v1 ret-message_v2
                                                             ret-message_v3 ret-message_v4.
      PERFORM make_message USING 'E' '00' '208' 'Error: Prospect not created' '' '' ''.
    ENDLOOP.
    IF sy-subrc <> 0.
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
        EXPORTING
          wait = 'X'.
      IF send_to_r3 IS INITIAL.
        CONCATENATE 'Prospect' partner_number 'created.' INTO msg
                                               SEPARATED BY space.
      ELSE.
        CONCATENATE 'Consumer' partner_number 'created.' INTO msg
                                         SEPARATED BY space.
      ENDIF.
      PERFORM make_message USING 'S' '00' '208' msg '' '' ''.
      CLEAR but000.
      SELECT SINGLE * FROM but000 WHERE partner = partner_number.
      IF sy-subrc <> 0.
        CONCATENATE 'Error: Partner'
                    partner_number
                    'Partner not created, date/time'
                    sy-datum
                    sy-uzeit
                    INTO msg
        SEPARATED BY space.
        PERFORM make_message USING 'E' '00' '208' msg '' '' ''.
        PERFORM make_message USING 'E' '00' '208' 'Error: Partner not created' '' '' ''.
        gv_partner = partner_number.
        return.
      ENDIF.

Thank you very much for the helpful answers.
The problem is solved.
'BAPI_EQUI_CREATE' needs a commit to make an entry in the Database.
CALL FUNCTION 'BAPI_EQUI_CREATE'
EXPORTING
external_number    = equipmentnummer
data_general       = data_general1
data_specific      = data_specific1
DATA_FLEET         = data_fleet1
VALID_DATE         = valid_date1
data_install       = data_install1
IMPORTING
equipment         = equipment1
data_general_exp = data_general_exp1
data_specific_exp = data_specific_exp1
data_fleet_exp    = data_fleet_exp1
return            = return1 .
DATA: ld_wait      LIKE bapita-wait.
ld_wait = 'X' .
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
    wait = ld_wait.

Getting a "Business partner not found with partner function type requester"

Hi There,
After I add a text item to the shopping cart using the SHOP t-code, I get a message "Business partner not found with partner function type requester" What could be causing this and how can I rectify this problem.
Please help mas this is an urgent issue.
Thanks,
Grace

Hi Grace,
First check :
1- transaction : CRM_OM_BP_INTEGRATE
select org structure where your user is and check that you have green lights (no missing address....)
2- Run transaction USERS_GEN
Select check user
Is everything correct or does the user need to be repaired ?
Kind regards,
Yann

Business Partner Notes appearing as GUID

Hi All,
In MSA Business partner notes are appearing as GUID instead of text. As a fix we have done the extract on CAP-Gen Object which solves the problem temporarly.
If new notes are added to the Business partner then once again the problem occurs appearing as GUID instead of the note details.
This impact is there only on the few machines but major machines are working fine.
Can any one let us know the cause for why the GUID is appearing instead of note details.
Thanks,
Regards,
Vikram Donthy.

Hi,
which version/SP of MSA are you using?
Did you already apply the accordant hotfix(es) mentioned in the particular collection note?
Regards,
Wolfhard

Business Partner records with large numbers of addresses -- Move-in issue

Friends,
Our recent CCS implementation (ECC6.0ehp3 & CRM2007) included the creation of some Business Partner records with large numbers of addresses. Most of these are associated with housing authorities, large developers and large apartment complex owners. Some of the Business Partners have over 1000 address records and one particular BP has over 6000 addresses that were migrated from our Legacy System. We are experiencing very long run times to try to execute move in's and move out's due to the system reading the volume of addresses attached to the Business Partner. In many cases, the system simply times out before it can execute the transaction. SAP's suggestion is that we run a BAPI to cleanse the addresses and also to implement a BADI to prevent the creation of excess addresses.
Two questions surrounding the implementation of this code. Will the BAPI to cleanse the addresses, wipe out all address records except for the standard address? That presents an issue to ensure that the standard address on the BP record is the correct address that we will have identified as the proper mailing address. Second question is around the BADI to prevent the creation of excess addresses. It looks like this BADI is going to prevent the move in address from updating the standard address on the BP record which in the vast majority of cases is exactly what we would want.
Does anyone have any experience with this situation of excess BP addresses and how did you handle the manipulation and cleansing of the data and how do you maintain it going forward?
Our solution is ECC6.0Ehp3 with CRM2007...latest patch level
Specifically, SAP suggested we apply/review these notes:
Note 1249787 - Performance problem during move-in with huge addresses
**applied this ....did not help
Note 861528 - Performance in move-in for partner w/ large no of addresses
**older ISU4.7 note
Directly from our SAP message:
use the function module
BAPI_BUPA_ADDRESS_REMOVE or run BAPI_ISUPARTNER_CHANGE to delete
unnecessary business partner addresses.
Use BAdI ISU_MOVEIN_CUSTOMIZE to avoid the creation of unnecessary
business partner addresses (cf. note 706686) in the future for that
business partner.
Note 706686 - Move-in: Avoid unnecessary business partner addresses
Does anyone have any suggestions and have you used above notes/FMs to resolve something like this?
Thanks,
Nick

Nick:
One thing to understand is that the badi and bapi are just the tools or mechanisms that will enable you to fix this situation. You or your development team will need to define the rules under which these tools are used. Lets take them one at a time.
BAPI - the bapi for business partner address maintenance. It would seem that you need to create a program which first read the partners and the addresses assigned to them and then compares these addresses to each other to find duplicate addresses. These duplicates then can be removed provided they are not used elsewhere in the system (i.e. contract account).
BADI - the badi for business partner address maintenance. Here you would need to identify the particular scenarios where addresses should not be copied. I would expect that most move-ins would meet the criteria of adding the address and changing the standard address. But for some, i.e. landlords or housing complexes, you might not add an address because it already exists for the business partner, and you might not change the standard address because those accounts do not fall under that scenario. This will take some thinking and design to ensure that the address add/change functions are executed under the right circumstances.
regards,
bill.

PAYEXT - Business Partner not Populating

Hi,
We are generating PAYEXT IDoc's from F111.
The Idocs are not populating the Business Partner number in the segment.
Can some one tell me what the issue could be.
Thanks in advance,
Sneha Singh.

1. Goto MDS load cockpit transaction and run the sync for that one customer... Check the log to see why the BP is not created
2. Since you are saying the order was created without any issues, check the credit account on the sales order (header data or table VBAK) check if a BP is created for the credit account (in case credit acct is different to sold to)
3. If sold to = credit account, check if your sd-fscm Badi is implemented correctly. Among other things this Badi copies credit info such as risk class from fscm onto the sales order. Check if this Badi is implemented correctly (I'm assuming u've already activated fscm credit management)
4. Finally you may want to consider adding a line to OVA8 for blank risk category, for all credit control area and block the document for max doc value of -.01. This will prevent any sales orders from getting created when the proper credit info is not copied over from fscm (or if the credit data had not yet been maintained on the BP)
Cheers,
Krishna

Business Partner not in List

Hi All,
I have created my business partner with the roles of employee and general bp I ahve also checked that all the fields are filled out just like the one from the default solman bp.
But when I ceate a suppot message and I want to assign my bp to the issue i cannot choose it. It just gives me notification that this bp cannot be responsible. What am I missing here??? Please help.
Miriam

Miriam Römer wrote:
> In IB52 all my satelite systems are assigned under sol_man_data_rep I tried putting in partners but nothing happened. I am fairly new to this so maybe I am missing something here.
That's right.
You should choose component of your system, for example, ERP 100 and in GOTO-PARTNER only SLFN0001 and put in for this value of your Sold-To Party.

Business partner not getting dunned though dunning procedure is attached

Hi All,
We have Business partner for which dunning procedure is attached , there is no dunning lock, i have checked the dunning procedure having levels.
is there link between dunning and payment method and Lock present in Incoming Payment tab in Business Partner master data?
I would like to know where i can check for business partner last dunned? i checked in CAA3 but could not find.
Thanks and Regards
Reena

Hi,
Incoming payment method option can be found at Contract Account level. There in the payments tab, you can find the Incoming payment method option.
Also, for getting the items for dunning, check directly at respective document level, if the incoming payment method is set. If there is no incoming payment method set, then it should allow the items for dunning.
Generally for incoming payment method, the payment is processed on the due date, so in most cases, you will see a lock applied for preventing the item to be considered before the due date. (Prevent Early Payment).
The payment method has the relation with the dunning. As the CA is registered for incoming payment method, it is expected that the payment would be received on a timely basis on or before the due dates, so these items are not considered for Dunning purpose.
FPM3 is the transaction that shows the dunning history for that account.
Manually run FPVA for dunning proposal if the items are elligible for dunning and check in FPM3 for the entry. It the print date for the entries found is blank, run FPVB for Dunning Activity.
Hope this clears your doubt.
Regards,
Rajesh Popat

Business Partner not the same

Hi,
I created business partner for the corresponding employee in HR,but both the numbers are not the same
I used the program "HR_SYNC_PERSON" to generate the business partner number.
Thanks
Manish

hi Manish,
to achieve this u have do required settings in HR integration tab in SPRO..
Pramod

CUSTOMER_REL - Business partner not created; duplicate check on address

Similar Messages

Maybe you are looking for