Customer replication from R/3 to CRM as BP's in install at role

Hi experts,
Customer's already exist in our ECC system. In CRM, we need to create the ECC customer;s as BP in install at role. From some ot the previous threads, I found that PIDE transaction can be used. Can anyone explain me the steps clearly for creating the BP's in CRM correpsonding to the R/c customer. I don't want to replicate them as BP's in ECC.
Thanks
Santosh

>
Santosh Kolleti wrote:
> Customer's already exist in our ECC system. In CRM, we need to create the ECC customer;s as BP in install at role. From some ot the previous threads, I found that PIDE transaction can be used. I assigned the customer account group classification to BP and to test the replication added a filter in R3AC1 transaction to pick only one customer and run the initial load transaction R3AS, system goes into infinite loop and I had to kill the simulation run.
> Error is " The program "SAPLSMO0" has exceeded the maximum permitted runtime without
> interruption and has therefore been terminated."
> Information on where terminated
> Termination occurred in the ABAP program "SAPLSMO0" - in
> "SMOF0_READ_SMOFOBJECT".
> The main program was "SMOF_DOWNLOAD ".
>
> In the source code you have the termination point in line 58
> of the (Include) program "LSMO0U06".
> Do I need to download anything else before doing the customer download from ECC to CRM.
>
> Can anyone help me fix this issue.
Hi,
You have done important steps.
You have to check all relevant functional modules are available in the table.
Then,you have to maintain/delete entries based on standard document.
Make sure all Queue is available with system users,right RFC and the queue is registered.
Make sure all the RFC connections are created and working properly.
You have to generate the objects.
Please check some of the above steps .
Regards,
SSN.

Similar Messages

  • Customer replication from R/3 to CRM as BP

    Customer's already exist in our ECC system. In CRM, we need to create the ECC customer;s as BP in install at role. From some ot the previous threads, I found that PIDE transaction can be used. I assigned the customer account group classification to BP and to test the replication added a filter in R3AC1 transaction to pick only one customer and run the initial load transaction R3AS, system goes into infinite loop and I had to kill the simulation run.
    Error is " The program "SAPLSMO0" has exceeded the maximum permitted runtime without
    interruption and has therefore been terminated."
    Information on where terminated
    Termination occurred in the ABAP program "SAPLSMO0" - in
    "SMOF0_READ_SMOFOBJECT".
    The main program was "SMOF_DOWNLOAD ".
    In the source code you have the termination point in line 58
    of the (Include) program "LSMO0U06".
    Do I need to download anything else before doing the customer download from ECC to CRM.
    Can anyone help me fix this issue.

    >
    Santosh Kolleti wrote:
    > Customer's already exist in our ECC system. In CRM, we need to create the ECC customer;s as BP in install at role. From some ot the previous threads, I found that PIDE transaction can be used. I assigned the customer account group classification to BP and to test the replication added a filter in R3AC1 transaction to pick only one customer and run the initial load transaction R3AS, system goes into infinite loop and I had to kill the simulation run.
    > Error is " The program "SAPLSMO0" has exceeded the maximum permitted runtime without
    > interruption and has therefore been terminated."
    > Information on where terminated
    > Termination occurred in the ABAP program "SAPLSMO0" - in
    > "SMOF0_READ_SMOFOBJECT".
    > The main program was "SMOF_DOWNLOAD ".
    >
    > In the source code you have the termination point in line 58
    > of the (Include) program "LSMO0U06".
    > Do I need to download anything else before doing the customer download from ECC to CRM.
    >
    > Can anyone help me fix this issue.
    Hi,
    You have done important steps.
    You have to check all relevant functional modules are available in the table.
    Then,you have to maintain/delete entries based on standard document.
    Make sure all Queue is available with system users,right RFC and the queue is registered.
    Make sure all the RFC connections are created and working properly.
    You have to generate the objects.
    Please check some of the above steps .
    Regards,
    SSN.

  • Custom fields mapping issue of sales order replication from R/3 to CRM

    Hello Experts,
    I have to replicate sales orders from R/3 to CRM system (Initial and Delta)
    The issue is I have custome fields in R/3 which are maintained in custom table(Z table) in R/3.
    We added those custom fields in CRM customer_i table to synchronise with R/3 data.
    To MAP R/3 custom fields to CRM custom fields, i have the following customization.
    1. Added the custom function module in the event CRMO_200 and moved all the custom fields into interal table  IT_OTHER_INFO.
    2. The intrnal table IT_OTHER_INFO with data is passed into CRM standard function modules.
    3. But in CRM the BADI 'CRM_DATAEXCHG_BADI' implementation does not have the input parameter of internal table TI_OTHER_INFO.
    All my custom data is in internal table TI_OTHER_INFO.
    Please suggest where can i map this data to CRM enhanced fields.
    Regards,
    Umashankar.

    Hello Vanessa,
    Thank you so much for your reply.
    I went through the Note (1053817). It is good. I understand that the custom fields should enhance in the BAPE_VBAP in R/3.
    My Scenario:
    Goal: Orders replication from R/3 to CRM along with Custom fields.
    In R/3, all the custom fields are maintained in Z table (Not VBAK or VBAP).
    All these custom fields are belongs to Item level.
    In CRM, The custom fields are maintained in CRMD_CUSTOMER_I table though AET.
    I need to MAP these custom fields to CRM while order replication from R/3 to CRM.
    Regards,
    Umashankar.

  • Scheduled delta replication from R/3 to CRM

    Hello Experts,
    we are planing to download customer master data from R/3 to CRM. It will be a completely one sided connectivity and we dont want to upload anything from CRM to R/3. And we are planing for Initial load as well as Delta load from only R/3 to CRM. How can I set this?
    And the delta  down load, we want to perform automatically once in day at a specified time..so is it possible?if yes how?
    thanks in advance.
    regards,
    kalyan

    Hi Kalyan,
    If You are using the Administration Console to deassign a site from a subscription or a subscription from a site, or to delete a subscription.
    The type of the related publication is simple intelligent (sync), simple intelligent (msg) or simple bulk (msg). As a consequence, changes (insert, update, delete) of a BDoc instance are sent to a site only if the site has been assigned the corresponding subscription. The assignment or deassignment of such subscriptions will not trigger a synchronization of the site database.
    Example:
    Your site Back-End is of sitetype R/3. It has been assigned a subscription for a BDoc type. The type of the publication is simple bulk (msg). The creation of a business object (for example, business partner) with identifier 111111 ensures that this business object will be sent to site Back-End.
    After deassigning the subscription in the Administration Console all changes in business object 111111 will not be sent to the site Back-End. In addition, a newly created business object with identifier 222222 will also not be sent to site Back-End.
    As you reassign the subscription, the following inconsistencies occur:
    Business object 111111 has not been synchronized in the R/3 back-end.
    Business object 222222 is not available in the R/3 back-end.
    And for scheduling background job for delta replication from R/3 to CRM, i am not sure about it.
    Regards
    Nadh.

  • BP Replication from R/3 to CRM

    Hi Forum,
    I am facing an issue with BP Replication from R/3 to CRM.
    Although the same scenario and configuration works well on my dev and qual environment and the same has been trasported to Production, apart from that R3 dev and qual system are completely updated with Prod data as on date so there is no question of any mismatch at the data level and config level.
    The following are the error messages am receiving in SMW01 for BUPA_MAIN:
    1. Business partner with GUID 36F36B473D31C04985CC8AEB314C6BE3 does not exist
    2. Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN
    Now none of my BP are flowing to CRM because of this issue.
    Appreciate any pointers for the resolution.
    Regards,
    Amit

    Hi Vikash,
    The RFCu2019s have been checked for authorisation test, remote logon n local logon. The RFC user is a dialog user and is working well for all logon. I have also checked both the systems they have the logical names as described by you (source & destination both).
    Another thing that validated my point regarding the connection setting is that the materials are flowing fine between the system and even the changes in these materials are replicating properly hence the delta for material is also fine.
    The Inbound and Outbound queues have been deleted from both r3 and crm and the only job running again at the moment is customer_main.
    Regarding you concern for the queue R3AI* it has not been generated even once whenever I have started the initial load. Right from the starting I am monitoring R3AD* in all the outbound and Inbound queues of both the systems.
    The sysfail message is coming for R3AD queue hence I think it is of no use to us. Still if I follow the error message it points towards SMW01 and there the error message is the same as described in the 1st message.
    I have just noticed 2 BP that have come in CRM as STP but its been hours after that no BP is flowing in.
    Now I am eagerly looking out for the final findings that we are going to get from the system when the issue is resolved.
    Thanks again and appreciate the efforts taken from your end.
    Regards,
    Amit

  • Error in delta load of 'Customer Group' from R/3 to CRM

    Hi Experts,
    I added new 'Customer Groups' in R/3. But this is not being updated in CRM. Do I have to trigger initial load again through R3AS or should I create new Customer Groups in CRM?
    The BP delta load BDocs are stuck in SMW01 due to this change. Also, if I need to do the Initial load of Customer Group, which object do I need to do the load for? Is it dnl_cust_sales?
    Please help as it is a Production issue.
    -- Pat

    Hi Pat,
    Use object 'DNL_CUST_SALES' to download Customer Group from R/3 to CRM.
    Use R3AS4 transaction to execute the same.
    Best Regards,
    Pratik Patel
    <b>Reward with Points!</b>

  • Customer replication from ECC to CRM

    Hello everyone,
    I am having some difficulty replication a customer from ECC to CRM.
    In our environment, customers are generally created from CRM & then replicated to ECC.
    Now we are creating a new Distribution channel & hence want to extend all our existing customers to the new DC.
    Since I am a SD Consultant, I was thinking of extending the customers in ECC.
    I tried extending a customer which was originally created in CRM. When I extended it to the new DC in ECC, it dint come over to CRM.
    I cannot see any BDOC in SMW01 also.
    Also when I checked the Filter setting in R3AC1 for objects BUPA_MAIN & Customers .. there is nothing set in the filters for the source ECC.
    Do I have to check any additional objects which I need to check ?
    Or is it that no settings means nothing created in ECC would come over ?
    Can anyone guide me so as to understand why this is happening.
    Also if there are any filters which i need to check, can anyone tell me what tcode & what adapter objects do i need to check ?
    Thanks
    Vin
    Edited by: vinit parkar on Aug 3, 2010 10:58 PM

    Hi,
    If you are downloading Customers from ECC(XD01/XD02/XD03) then CRM uses the adapter object CUSTOMER_MAIN and not BUPA_MAIN. You can check if there are any filters in this object.
    Alternately you can check if the delta is active in ECC. I do not remember the transaction for checking this but you can find the same from the menu path.
    Cheers
    Binai

  • Business Partner Replication from R/3 to CRM

    Hi,
    I am trying to replicate BP (eg 891151) from R/3 to CRM.  While replicating Error segment in T.Code SMW01-Display BDocs shows that  industry AXALTO is not maintained.
    I was searching this in Table TBRC in R/3 but says No table entries found.
    But the same Industry is attached to the Customer in XD03 in R/3 in field Global Account. 
    My doubt is, the particular field (Global Account) is having a search help and it is allowing a data which is not maintained in master data. 
    Whether is it possible ?

    Hello,
    You should ask this kind of question in this SAP CRM: Webclient UI - Framework.
    Check if you execute the initial dowload of adapter object DNL_CUST_TBRC.
    Regards,
    Fred

  • Tax condition records replication from r/3 to CRM.

    Hi,
    We are on CRM 5.0 and backend is 4.7. We have downloaded all condition objects from r/3 to crm. When I tried to create an order everything is determined in CRM (R/3 pricing procedure, PR00) but for tax conditions.
    Where I can view the condition records downloaded from R/3 in CRM system?
    Thanks in advance.
    Srinivas

    Hi Nitin,
    I believe the maintenance of the condition type is done in R/3. If this is the case then in R/3 you can go to the following path
    Under SPRO ->SAP Customizing Implementation guide ->Sales and Distribution -> Basic Functions -> Pricing -> Pricing Control ->Define Condition Types.
    Here for the condition type you wiill maintain the "Condition Class" and  "Calculation Type". Once it is maintained You can trigger DNL_CUST_CNDALL to bring it down to CRM.
    you can monitor the trigger that you did using SLG1 transaction.
    Thanks
    Abishek

  • Replicate customer contact from R/3 to CRM

    All,
    here is the scenario
    I have downloaded customers from R/3 to CRM. Now I'm trying to download the contacts in customer account to CRM. When I go to relationships in CRM, I should be able to view the same contacts in R/3 for this customer
    Settings
    In CRM customizing data transfer setting for partner processing, I have AP already selected.
    In R/3 there is no partner function assigned/ created for this customer but have a contact.
    I tried to replicate this with Customer_Rel object KUNA1 table -- but didn't work
    I tried to with the same object with table KVNK only for one single customer. It has been processing for ever...
    I want to create the contact with the same number as BP instead of having different number for contact person.
    Can someone please help me !!!
    Thanks,
    Sri

    Ensuring that the number range of contact person is same in both R/3 and CRM - OSS note 564538.
    Create function module : Z_CHANGE_CONTACT_GROUPING copying BUPA_MWX_BDOC_MAP_MAIN_CENTRAL
    I hope this helps.
    Gaurav

  • Customer Data from R/3 to CRM - how to deactivate some fields?

    Hi,
    is there a possibility to exclude some customer master data field changes (e.g. kna1-katr8) from being transfered to CRM?
    Change pointers - that could be deaktivated in BD52 - don't influence the data distribution?
    Regards stefan

    You can influence the mapping of fields in the standard BADI's for downloading the customer_main BDoc, but there is no way to deactivate the mapping in standard - why should anyone? Performancewise this is no real gain, and one can still deactivate the display of fields in CRM if the data should not get displayed.
    Regards, Kai

  • Material Master Replication from R/3 to CRM 7.0

    Hi ,
    I am trying to replicate the Material maintained in R/3 to SAP CRM 7.0. Here is, what i have done up till now...
    I have downloaded
    Object DNL_CUST_BASIS
    Object DNL_CUST_PROD0
    Object DNL_CUST_PROD1
    using tcode : r3as & all have been downloaded successfully.
    But when i try to download Object Material from R/3 to CRM using the same tcode, its giving me an error saying
    004 : Hierarchy for material types does not exist
    005 : MATERIAL: Object will not be loaded
    Right now i am able to see the categories & hierarchies in tcode COMM_HIERARCHY.
    I would appreciate if some one can suggest suitable solution for this issue.
    Thanks,
    Edited by: SAPRPT on Aug 12, 2009 9:23 PM

    Hello ,
    There might be two reasons:
    1)There must be some inconsistency in CRM with respect to hierarchies.You can use reports COM_HIERARCHY_DELETE_ALL in CRM and then again download DNL_CUST_PROD1 and then object MATERIAL.
    2)There must be some materials in R/3 which have been maintained for some obsolete hierarchy.
    That means hierarchy is not present in CRM and/or also it might not be present in table T179 of R/3.But in table MARA,this hierarchy has some records.Please check and correct the records.
    Best Regards,
    Shanthala Kudva

  • Serial Number Replication from R/3 TO CRM

    Hi Experts,
    Currently the Equipments are replicating from R/3 to CRM. If we want to replicate only Serial Number as Individual Object , will their be any effect on the equipment already replicated to CRM or  what will be the effect of replicating Only Serial Number with out equipment.
    We are working in 6.O version.
    Can u please reply for this message  ASAP.........
    regards,
    Sarangamath
    Edited by: Sarangamath on Dec 7, 2011 10:53 AM
    Hi Experts,
    Can you please reply on this issue - Its Urgent
    Regards,
    Sarangamath

    Hi Kalyan;
      You can define different number ranges in R/3 and CRM.
    As per my understatnding number ranges maintained in R/3 is  0000000001-ZZZZZZZZZZ which is already exist in CRM.
    You can try following steps
    1. Define new number range ( as an ext no range)in CRM as per your requirement (which is not used in CRM)
    2. create new groupings then assign number range in to grouping.
    3. Then go to R/3 and change the number ranges for BP as a internal number ranges
    4.Goto T.Code PIDE there select R/3 to CRM. and enter the mapping details with new number ranges then start downloading.
    If helps reward the points.
    Regards
    Jameem Khan.
    TTL Mumbai

  • Material Listing/Exclution replication from R/3 to CRM,

    hi,
    We are using SAP CRM 3.0 and R/3 4.6c
    In R/3 system we maintained an exclution for a material and the system is giving the message 'Material xxxx excluded.
    If we use the same customer and the same material in CRM, the Material xxxx accepting (there is no message saying material excluded)
    Please let me know if there is any downloading object for material listing/exclusion or how to over come this problem
    Thanks in advance.
    Regards,
    Ram.

    This is a recent blog http://weblogs.sdn.sap.com/pub/wlg/15445?page=last [original link is broken] [original link is broken] [original link is broken]
    I can't remember if 3.0 offers some or all of this.

  • Problem in customer replication from ECC to CRM

    Hi experts,
    When I create a customer in ECC using Tcode XD01 a BDOC is created in CRM. But this Bdoc shows following errors:--
         Partner (): the following errors occurred
         Incorrect input data:
         Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN.
    When I see the Bdoc message body the data(central data etc )is all blank except the field Object = BUSINESSPARTNER.
    Why the Bdoc messae is not getting populated with correct value?
    Also how I can see the data which is being sent from ECC. Is there any Idoc or something  created at ECC outbound side where I can see the sent data?
    Where in XD01 bdoc message is being created?
    Please help.
    Regards,
    Vimal

    Hi Vimal,
    You'd need to debug the FM CRM_BUPA_MAIN_VAL to find out what was the cause of validation error. Once you get the missing details, check if those details are being populated correctly at ECC end.
    Thanks,
    Rohit

Maybe you are looking for