Customer Replication problem from R/3 to CRM

The scenario is: We have upgraded R/3 to 4.7 and the logical system names have changed. CRM is still the same one ( 4.0 ).
Everything works fine. If I create an order it goes to R/3 and If I change an existing customer in CRM or R/3 it get replicated into the other system.
But if I create a new customer in R/3, it does not go to CRM.
All the tables are ok with the correct logical name and RFCs are working fine. Serial numbers are ok too and Delta download is active. I do not know what else I can check.
Did you have any similar situation? Any ideas of what I could check?
Any input is highly appreciated.
Thanks!

Hi Ankur & Michael
your points did help me to rectify the problem. here was another solution i did try and it worked out.My problem was in table CRMPAROLTP, in the field CONSUMER. It seems that 4.7 does not need to have this field filled. So I remove the entry and the information flows.
PS. I had awarded the points for both of you.
Thanks
SP

Similar Messages

Material Replication problem from SAP ECC to CRM 2007

I am trying to load material data from SAP to CRM. Materials are in general coming across however i have a lot of errors visible in smw01 with the following entries:
@0A@     BDoc validation error     PRODUCT_MAT     mBDoc Validate     06/04/2010     14:20:05     QAS100     R3AI_MATERIAL     MW_RFC_USER     DF6FDBE147AC2EF1B467002264F6091A
On closer examination i can see that the specific issue relates to teh following:
A key was used twice for multirow set type CRMM_PR_TAX
    Message no. COM_PRODUCT512
I can see on closer examination of the individual entries why the issue is occuring when i show the Bdoc message extra data I can see that there are multiple entries for CRMM_PR_TAX
CLI PRODUCT_GUID                     TAX TAX TAX_ TAX_GROUP            TAX_TARIFF_CODE T C VALID_FROM          VALID_TO            UPNAME       H LOGSYS
400 00000000000000000000000000000000 IE      MWST NONE                                      06/04/2010 13:20:05 12/31/9999 23:59:59 MW_RFC_USER    QAS100
400 00000000000000000000000000000000 US      UTXJ NONE                                      06/04/2010 13:20:05 12/31/9999 23:59:59 MW_RFC_USER    QAS100
400 00000000000000000000000000000000 US      UTXJ NONE                                      06/04/2010 13:20:05 12/31/9999 23:59:59 MW_RFC_USER    QAS100
400 00000000000000000000000000000000 US      UTXJ NONE                                      06/04/2010 13:20:05 12/31/9999 23:59:59 MW_RFC_USER    QAS100
I also note that the PRODUCT_GUID is blank 00000000000000000000000000000000 whic shouldn't be the case.
It's just not clear to me what i need to do to resolve the issue
Any help would be greatly appreciated
Regards
Eddie

I am trying to load material data from SAP to CRM. Materials are in general coming across however i have a lot of errors visible in smw01 with the following entries:
@0A@     BDoc validation error     PRODUCT_MAT     mBDoc Validate     06/04/2010     14:20:05     QAS100     R3AI_MATERIAL     MW_RFC_USER     DF6FDBE147AC2EF1B467002264F6091A
On closer examination i can see that the specific issue relates to teh following:
A key was used twice for multirow set type CRMM_PR_TAX
    Message no. COM_PRODUCT512
I can see on closer examination of the individual entries why the issue is occuring when i show the Bdoc message extra data I can see that there are multiple entries for CRMM_PR_TAX
CLI PRODUCT_GUID                     TAX TAX TAX_ TAX_GROUP            TAX_TARIFF_CODE T C VALID_FROM          VALID_TO            UPNAME       H LOGSYS
400 00000000000000000000000000000000 IE      MWST NONE                                      06/04/2010 13:20:05 12/31/9999 23:59:59 MW_RFC_USER    QAS100
400 00000000000000000000000000000000 US      UTXJ NONE                                      06/04/2010 13:20:05 12/31/9999 23:59:59 MW_RFC_USER    QAS100
400 00000000000000000000000000000000 US      UTXJ NONE                                      06/04/2010 13:20:05 12/31/9999 23:59:59 MW_RFC_USER    QAS100
400 00000000000000000000000000000000 US      UTXJ NONE                                      06/04/2010 13:20:05 12/31/9999 23:59:59 MW_RFC_USER    QAS100
I also note that the PRODUCT_GUID is blank 00000000000000000000000000000000 whic shouldn't be the case.
It's just not clear to me what i need to do to resolve the issue
Any help would be greatly appreciated
Regards
Eddie

Error while replicating customer master data from R/3 to CRM

Hi gurus,
I am working on replication of customer master data from R/3 to CRM. It was working fine till date. But Now I am not able to replicate because in Inbound queue (in CRM 5.0) I get the status SYSFAIL for queue name R3AI_DNL_CUST_ACGRPB. When I checked SYSFAIL it shows "Incorrect parameter with CALL FUNCTION"
Kindly help regarding it.
regards,
vimal

Hello Vimal,
Please refer 552435 and see if this helps.
Please reward points.
regards,
Muralidhar Prasad.c

Replication of Customer master data from R/3 to CRM.

Dear Friends,
If i want to replicate customer from R/3 to CRM what are the prerequisites and how to execute a campaign for the replicated BP's(target groups).What is the load object that we use in R3AS.
REgards,
Prabhu.

CUSTOMER_MAIN is the object used to download customers from R/3 to CRM.
For CRM 5.0 you can use the link below:
http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/html/BBlibrary.htm
You then need to read the instructions for:
CRM Generation
CRM Connectivity
CRM Customizing Replication
CRM Organization Model
CRM Master and Transaction Data Replication
Those steps will provide on how to setup the middleware for customers.
You then will need the to read the following building blocks for marketing:
CRM Central Master Data
CRM Marketing Master Data
CRM Lean Campaign Management.
Good luck,
Stephen

Customer Master replication error from R/3 to CRM

Experts,
I am trying to replicate Customer Master from R/3 to CRM.
All the settings have been done. Nothing shows up in Queues. However, Bdoc hangs in "Received" state.
When I try to reprocess the Bdoc, I get a prog dump of type DBIF_RSQL_INTERNAL_ERROR in below function module: CRM_BUPA_FRG0020_SAVE_TABS
at INSERT crmm_but_set0020 FROM TABLE it_set0020_insert[]
This data corresponds to Shipping data in Customer Master.
Can you please help? I saw a similar thread in the forum where there was a suggestion about R/3 plug in update. How can I do that?
Thanks in advance,
JD

Pls see Customer Master replication error
Closed.

Error in pulling customer master data from R/3 to CRM

Hi,
I am trying to pull customer data from R/3 to CRM with different SHIP-TO partner. In this case, the VAT REG. NO. is different from its country ISO code, so when i try to execute in tcode R3AR2 and R3AR4, I was encountered error message in tcode 'SMW01' saying "ISO CODE <code> IS NOT CORRECT IN THE VAT REGISTRATION NUMBER".
Is there anyone knows any recent updates from SAP that might solve this problem?
Please help.
Thanks.

Hello,
it seems your customizing of ERP and CRM is different in this area.
Please try a new initial load for all the customizing objects which may be responsible:
DNL_CUST_BASIS
DNL_CUST_BASIS2
DNL_CUST_BASIS3
DNL_CUST_BASIS5
DNL_CUST_BASIS6
DNL_CUST_BNKA
DNL_CUST_KTOKD
DNL_CUST_PRC
DNL_CUST_PROD0
DNL_CUST_PROD1
DNL_CUST_PROD3
DNL_CUST_SPROD
DNL_CUST_TVAST
DNL_CUST_TVFS
DNL_CUST_TVKN
DNL_CUST_TVLS
We do every week a new load of this objects using a background job.
Alternativly you could investigate which customizing object is the correct one and only load this.
After this new load retest your scenario.
Best regards
Manfred

Customer Database Synchonization from R/3 to CRM Problem.

Dear Sir,
I just upgrade from CRM 2.0c to CRM 5.0, when to configure the synchonization from SAP R/3 to CRM. The customer master from R/3 is come to CRM , except the contact person telephone, fax, it does not come to CRM. How can I check on this.
Please kindly advise.
Thank you and best regards,
Vimol

Hi Vimol,
Contact person in CRM will get created as separate business partners with internal number range. Make sure you have a generic internal number range assigned to an internal standard grouping.
Now you can download the object CUSTOMER_REL, which should bring all contact persons into CRM. If still you have the issue, try creating a contact person in CRM manually and see what happens. let me know the outcome
<b>Do not forget to reward if it helps</b>
Paul Kondaveeti

Scheduled delta replication from R/3 to CRM

Hello Experts,
we are planing to download customer master data from R/3 to CRM. It will be a completely one sided connectivity and we dont want to upload anything from CRM to R/3. And we are planing for Initial load as well as Delta load from only R/3 to CRM. How can I set this?
And the delta down load, we want to perform automatically once in day at a specified time..so is it possible?if yes how?
thanks in advance.
regards,
kalyan

Hi Kalyan,
If You are using the Administration Console to deassign a site from a subscription or a subscription from a site, or to delete a subscription.
The type of the related publication is simple intelligent (sync), simple intelligent (msg) or simple bulk (msg). As a consequence, changes (insert, update, delete) of a BDoc instance are sent to a site only if the site has been assigned the corresponding subscription. The assignment or deassignment of such subscriptions will not trigger a synchronization of the site database.
Example:
Your site Back-End is of sitetype R/3. It has been assigned a subscription for a BDoc type. The type of the publication is simple bulk (msg). The creation of a business object (for example, business partner) with identifier 111111 ensures that this business object will be sent to site Back-End.
After deassigning the subscription in the Administration Console all changes in business object 111111 will not be sent to the site Back-End. In addition, a newly created business object with identifier 222222 will also not be sent to site Back-End.
As you reassign the subscription, the following inconsistencies occur:
Business object 111111 has not been synchronized in the R/3 back-end.
Business object 222222 is not available in the R/3 back-end.
And for scheduling background job for delta replication from R/3 to CRM, i am not sure about it.
Regards
Nadh.

Replicating customer from R/3 to CRM found Acct group y001 do not exist

Hi gurus,
I tried to replicate the customer master data from R/3 to CRM. Using Tcode SMW01 i found out that Account group Y001 do no exist.
Note:
Y001 is the account group i created in R/3. I also assigned it to CRM grouping Y0 using tcode PIDE.
Kindly help regarding it.
Regards,
vimal

You can copy exactly error ??..
For replication you need use tx PIDE in R3.
In folder CRM>R3 you assign "BP Classification: Consumer, Customer, Sales prospect, competitor" to account group in R3. The BP Classification is hard code in CRM and only are available 5 types of classification.
In folder R3> CRM you assing Account group R3 to CRM Classifcation and grouping. Grouping CRM is done in SPRO > Cross-Application Components >SAP Business Partner > Basic Settings > Number Ranges and Groupings > Define Groupings and Assign Number Ranges.
Then, you define filter for replication in tx R3AC1 and replicate with tx R3AS

Industry error while doing replication of customer from R/3 to CRM

Hi,
We have production system already implemented and going for roll out for another company both R/3 & CRM.
We have generated conditional objects while doing roll out phase. From then we are getting this error.
Problem:
Customers are not getting replicated to CRM. And in SMW01 the error log says
"Industry 300 not defined for industry system SAPS
Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN."
Since we are going for roll out we have done initial load of all conditional objects
like 'DNL_COND_A002' etc.
After running we did checked in R3AM1 - everything was DONE - in green colour.
But in SLG1 - Display log - there are several entries in Red colour.
Message text says -
"It is not possible to change client-independent Customizing objects
Diagnosis:
Change of client-independent Customizing objects is not permitted in the client in which the transfer of data for table T682 is executed.
System response:
As table T682 contains client-independent Customizing, data transfer is interrupted.
Procedure for System Administration
Provide users with the appropriate authorization to execute data transfer in a client in which changes to client-independent objects is permitted."
Now queues are pilled up with the industry error and don't know how to correct these errors.
Please help.
Regards,
Dhanraj Dange

Hi pankaj,
Step 1:After completing Initial Download tranfer of data takes place from R/3 to CRM system in the form of Customers or employess.
Bulk data will be flown in the first step.
I f there are any errors ,we solve the errors and replicate them manually by using CRMM_BUPA_map.
Step2:There are few customers which are created daily in SAP SD or R/3 and these customers are transfered from R/3 to CRM .
So my question is Is this b'cos of Delta Download or Bcoz of some other Reason.
If so "Is there any specific name for this.
Regards,
divya

Custom fields mapping issue of sales order replication from R/3 to CRM

Hello Experts,
I have to replicate sales orders from R/3 to CRM system (Initial and Delta)
The issue is I have custome fields in R/3 which are maintained in custom table(Z table) in R/3.
We added those custom fields in CRM customer_i table to synchronise with R/3 data.
To MAP R/3 custom fields to CRM custom fields, i have the following customization.
1. Added the custom function module in the event CRMO_200 and moved all the custom fields into interal table IT_OTHER_INFO.
2. The intrnal table IT_OTHER_INFO with data is passed into CRM standard function modules.
3. But in CRM the BADI 'CRM_DATAEXCHG_BADI' implementation does not have the input parameter of internal table TI_OTHER_INFO.
All my custom data is in internal table TI_OTHER_INFO.
Please suggest where can i map this data to CRM enhanced fields.
Regards,
Umashankar.

Hello Vanessa,
Thank you so much for your reply.
I went through the Note (1053817). It is good. I understand that the custom fields should enhance in the BAPE_VBAP in R/3.
My Scenario:
Goal: Orders replication from R/3 to CRM along with Custom fields.
In R/3, all the custom fields are maintained in Z table (Not VBAK or VBAP).
All these custom fields are belongs to Item level.
In CRM, The custom fields are maintained in CRMD_CUSTOMER_I table though AET.
I need to MAP these custom fields to CRM while order replication from R/3 to CRM.
Regards,
Umashankar.

Document/customer pricing and replication of pricing data from r/3 to crm

Hi,
can any one tel me how can we replicate the r/3 pricing condition, pricing procedure to crm.
once it is replicated to crm what customization is require in crm.
tel me abt customer and document pricing procedure, how it will be effected in the transactions.
plz any one help me to know this scenarios.
thanks
kumar

Hello Sathish,
Start from here: [Data Transfer from SAP ECC (Download)|http://help.sap.com/saphelp_crm60/helpdata/en/51/62431b7b3511d3ad650000e8a5bd28/content.htm] The help document gives you the steps required. You can also see the [Master Guide |https://service.sap.com/~sapdownload/011000358700001398312008E/MG_CRM2007V2.pdf]or [Customizing Replication Guide|http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/Documentation/B09_BB_ConfigGuide_EN_US.doc] for similar configuration information.
Essentially after you download the pricing related customizing data from ECC into CRM, you have to download the conditions. the standard conditions get downloaded without any issues since the download adapters are defined already. However, for downloading custom conditions in ECC, you have to do further configuration. You have to define the adapter objects and do the initial download of those conditions. Such an information is available in the [Master data and Transaction data Replication Guide|http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/Documentation/C03_BB_ConfigGuide_EN_US.doc].
Easwar Ram
http://www.parxlns.com

Customer fields replication in Sales order from R/3 to CRM

Hi all,
I want to replicate, for Sales orders, one field (ZFIELD_A) on item level (VBAP) from R/3 to CRM .
I used transaction EEWB on CRM with the option "Adding new fields to Business transactions" and I flagged checkbox "Also used in R/3".
All worked fine and all the repository objects where created both in CRM and R/3, and the fileds was appended in structure CUSTOMER_I (CRM).
The problem is when I replicate the data, because of existing customer fields in R/3.
In R/3 I have exisiting fields on BAPE_VBAP
ZFIELD_1 [CHAR1] - existing
ZFIELD_2 (CHAR1] - existing
ZFIELD_A [CHAR30] (the new one)
Assuming the above field values are X-Y-thisisatest
the value of ZFIELD_A in CRM will be "XYthisisatest", since R/3 sends, in structure BAPIPAREX all the three Customer fields.
In the generated (from EEWB) method ZEEW_DATAEXCHANGE01->CRM_DATAEXCH_R3D_MBDOC_FILL, called when transferring the order to CRM , all the first 30 positions are moved to ZFIELD_A from CRM.
A solution would be to change the generated coding of the above method, by truncating the first 2 chars, but it's not so nice (and I also could loose the changes after a generation of the EEWB project).
Anyone has a nicer idea?
thanks a lot,
Fabrizio

Hi
Go through the following NOTEs
736595,833585,863611,873771.
Regards
Nadh.

Replication of Customer and Material master from R/3 to CRM

Hi
Recently in our quality server basis administrator has made a client copy from production server after that customer master and material master are not flowing from R/3 to CRM, even sales orders were not getting copied from CRM to R/3 , i went through C71 BB config document and fixed the sales orders updation from CRM to R/3 but not able to resolve the problem of customer master and material master from ECC to CRM.
I went to B09 BB document and all settings are fine.
Using R3AS I have loaded following objects DNL_CUST_PROD0, PROD1, PROD3, SPROD , DNL_PLANT. and Material.
I went to R3AM1 and checked the status as running or wait for each object.
There are no filters in R3AC1 .
Queue name withR3AD_MATERIA0000000001 has status SYSFAIL in SMQ2 .
What can i do to resolve this problem.
Please advice.
Thanks,
Vaishnavi

Hello Vaishnavi,
After the client copy , have you run txn:BDLS in order to change the LOGSYS in all relevant tables?
You can run this txn in test mode as well to see the affected tables.
Are you getting any dump on these load ?Check it in txn:ST22.
Hope this helps!
Best Regards,
Shanthala Kudva.

Customer master data replication probelm from ECC to CRM system.?

Hi..Gurus,
Intial downloading was done for master data and transaction data..but after 10 days.. some changes in ECC system will not replicate to CRM system..delta down loading working or not how i can check ? or i have again do the intial downloading for customer_main..plz help me..?
Truly,
San Rao.

Hi,
make sure that the Middleware is activated in R/3 table TBE11 for
application component BC-MID as below:
Application ID Active Text
BC-MID X Middleware
Also, in R/3 table TBE31 make sure the following even has been activated
00001321 BC-MID PI_BP_CUSTOMER_BTE_1321
In R/3 table CRMRFCPAR make sure that the delta load has not been
deactivated for the object Customer_Main....
If this is ok check filter on the object Customer_Main in trx. R3AC1 in
CRM to make sure they havent filtered out the relevent BP's
If you have a BP expample use CRM trx. CRMM_BUPA_MAP to gather the BP
from R/3 into CRM...this will either lead to a sysfail in CRM SMQ2 or
A short dump in ST22 if there are any errors...
Also, after using trx. "CRMM_BUPA_MAP" check in SMw01 for Bupa_Main
bdocs...if there are errors they will norally be on the validation of
the BP in CRM and the bdocs will have errors...
Regards, Gerhard

Customer Replication problem from R/3 to CRM

Similar Messages

Maybe you are looking for