Customer return , Inspection lot stock tab
hi ,
i am doing customer return senario , and as per requirment of client i activate inspection type 05 cause they want inspection lot stack tab in UD , but when i am doing customer return inspection lot is generated with reference to sales order and delivery number as i see in qa03 , but when doing an UD it does not contain inspection lot stok tab please suggest
Regard
Maashish
Hello
Check the movement type and make sure that you have activated the inspection for it. only 653 will create an inspction with stock posting tab
Regards
gajesh
Similar Messages
-
Customer return inspection lot
Hi,
Actually I got an problem in customer return quality scenario , when i do an PGR there are two inspection lot is created one is with reference to material document number and another is with delivery and sales order number .
Please tell me why the two inspection lot is generating
( Note :- i am not able to activate inspection type 06 because our client want to inspection lot stock tab in usages decision, so i activated inspection type 05 , and inspection lot stock tab is came in lot refer to material document not in lot of delivery and sales order number )
Please explain briefly if it is fine, or correction required
Regards
MaashishDear Maashish
I got the issue
1) Please let me know what is the movement type you are using
2) The reason why 2 lots are created is this
a) One inspeciton lot is created because of movement type - which is actualy giving you the inspection stock posting tab
b) Another one is getting created based on the assignement of inspecion type in delivery type in the config
Please remove the inspection type for the delivery type and then do the test
This will clear the issue
Regards
Gajesh -
SAP QM - Inspection Lot Stock tab missing in QA11
Hi,
My scenario is raw material inspection and I executed the scenario as follows
Step 1 : Assigned 01 inspect type to the material in QM view .
Step 2 : Created three MIC's
Step 3 : Created Sampling procedure
Step 4 : Created inspection plan for material by assigning MIC's & Sampling procedure to operation.
Step 5 : Goods receipt of 100 Qty for the material through purchase order.
Step 6 : Created Inspection lot for material.
Step 7 : Inspection lot selection for material and recorded the results.Then valuated the results and i reject 2 out of 3.
Now I have to post the some qty to unrestricted use & some qty to vendor i.e return delivery. To do the same, inspection lot stock tab is missing in QA11.
Pls suggest if I missed any thing in this process.
Thanks in advance.
With Regards
SrinivasHello NiTiN J,
I will clear the confusion.
As I described the scenario in my first post, I have created inspection lot manually (QA01), then selected the same using QA32, here I had recorded the results & UD also. When I check in MMBE for unrestricted use stock, it is still showing under QI only. Then I identified that Inspection lot stock was missing. So, I started posting in SCN (After searching).
Mean while in the discussions I thought that, I completed RR & UD for the material. Now if any suggestions from expects won't applicable for my query. So, after Craig's recent discussion, for the same material once again I have done the GR through purchase order and created inspection lot manually.
Now I found inspection lot (1st) through Material Document(i.e. MB51 as suggested by Mr.Craig)
In QA32 (2nd) inspection lot, which is created manually.
Now I have two inspection lots for the same material and I have not recorded the results nor UD for these lots. Just created and waiting for suggestions.
And for 1st inspection lot , I tried to do results recording using QA11 also. But system through's error as shown in screenshot.
I think I cleared the confusion.
Pls correct me if I am wrong or missed anything.
With Regards
Srinivas -
Inspection lot stock tab is missing
Hi,
In inspection lot generated for 01 insp type purchase order, the inspection lot stock tab is missing.
Is there any control ?No.
The inspection lot stock tab is not cotrolled by user in standard, but fields possible by configuration.
If there is no inspection lot stock tab, it means the inspection lot has no stock even if insp. type '01'.
As YOGINI mentioned already, it must be source inspection or GR with other account assignment (not stock).
Regards
Luke -
Inspection lot stock tab in UD
Dears
When i give UD system not taking to Inspection lot stock tab for entering qty to move to unrestricted or block stock
We manualy want to select the tab for entering qty to move to unresticted
were the setting need to be done
FaisalI think you are talking about the stock posting proposal in the selected set.
in QS51 > selected the code group> go to codes> maintain a proposal against each code> Remove the proposal for automatic posting.
Then it will take you through the stock posting screen after you enter the UD code. -
Display mode of storage location field in inspection lot stock tab in QA11
Hi Experts,
I want to maintain the storage location filed in display mode in Inspection lot stock tab in Transaction QA11
So please anyone can help me to solve this.
Regards,
Uttam PalI'm not sure I understood the question.
In the UD screen on the first page the storage location is shown in display mode. To change that you can use QAC2.
On the stock posting screen you can change the storage location the stock is being posted if desired. Usually most places don't have a need to change this and procedurally train their users not to.
If you wanted the stock posting screen to be display only, you probably have to use the screen editor to modify that which I don't think you really want to do.
You could use automatic UD's to process your ok lots and then take away the QA11/12 from most of your users. Then have only a few people trained to do the inspection lots requiring a manual UD. If these people change the storage location it would be a specific choice they made, not an accident. If this becomes a problem, they either need more training, or need to be fired.
FF -
No "Inspection lot stock" tab in QA11
Hi,
Quality lot gets created for each Goods Receipt for material with Quality management active. For particular raw material we found that for last Goods receipt the quality lot got created as usual. But in QA11 we found that there is no "Inspection lot stock" tab whereas for the second last Goods receipt for the same material there is "Inspection lot stock".
What would be the reason?
With Best Regards,
RajkumarHi,
Please refer: [No WM Posting Change created after Usage Decision for B stock].
QM does not suppoort Stock Posting for Special Stock like B, K.
Regards, -
Enhancement for QA32 Inspection lot stock tabs
Hello everybody:
In QA32 user can do UD operation in "Characteristics" tabs and do Posting operation in "Inspection lot stock" tabs.
phase 1: I use QEVA0010 enhancement to check UD in "Characteristics" tabs and it works.
phase 2: I need to check the value of "To unrestricted use" field in "Inspection lot stock" tabs but I can't find enhancement to do that.
In my company, some user can use QA32 to do UD and do posting. But some of them often do posting without UD. In QA32 there is only a warning message if you do posting without UD. So I need to check when user enter value in "Inspection lot stock" tabs some conditions must be satisfied (like UD).
Is there any enhancement to use for my issue? thank you.
ps. I have already tried QEVA0001. it doesn't wok.
attachment is the picture of warning message.Hello,
Here i suggest you that if you are using Exit for UD then in that only just apply one code where program first will check the QAMR/QASR etc. all result table field w.r.t inspection lot and if fields found empty means no data or RR then system wont pass UD code for UD posting.
Or just make first MIC as required MIC and apply the code in that first MIC, if that MIC value is blank then again system wont allo UD.
Secondly, Status profile maintenance is also an another stdn way to execute the requirement.
Regards -
Inspection Lot Stock Tab - To Be Posted to Unrestricted-Use Stock
Hi Experts,
Please guide me for:
At the time of UD,sometimes i forget to enter the unrestricted stock quantity in inspection lot stock tab therefor quantity does not transfer into unrestricted stock and its shown in QI.So,i want to make it mandatory.please suggest me,How to do it?
Thanks & Regards,
Vivek BhojakHi Vivek,
Please activate "Stock Posting in Background" indicator in Tx QS51 for your UD code as shown below -
This should solve your purpose and complete stock form QI will be posted to Unrestricted stock/Blocked stock. This is a safer process I always recommend.
Otherwise, in case you still wish to so UD posting form 'Inspection Lot - Stock Tab' manually, but want to make sure that is there is no quantity selected, then the UD shouldn't be done, then you will have to make enhancement appropriately below -
QEVA0001 Enhancement: Quantity posting for usage decision
Thanks,
Arijit
Message was edited by: Arijit Banerjee -
Unable to see Inspection lot stock tab in UD??? how to make it appear?
Hello Friends
Some how i am getting three unexpected observation
1. Inspection lot stock tab in UD is not there.....how to make it appear so that i can do the quantity posting can be done.
For your information this is against good receipt & QA32 quantity to be posted is showing the qty correctly.....which means stk is in quality
2. In MMBE transaction i am not able to view batch & qty posting
3 In MB51 i can see the document details but qty is showing in unrestricted....which means stk in unrestricted which contractdory to my first statement.
Kindly let me know
1. How to make Inspection lot stock table available in UD
2 Any clue for 2 & 3 point if possible.
Thanks & Regards
SwanandThanks for reply
But the problem is not of stock going to quality or not.....anyway i checked it and it's correct.
Problem is i am not getting Inspection lot stock tab in UD.......here this inspection lot is created due to good receipt (inspeciton type 01)
My query is not yet answered
Thanks & Regards
Swanand -
Hi
While making UD, Not getting the tab named as "inspection lot stock". I have already recorded the result and the status is INSP RREC.
Please guide
ThanksHi, Samuel,
What is the inspection type there for your query. See there are two type of inspection types in QM
1. Stock relevant: e.g. 01,04,08,09 etc
2. Stock Ir-Relevant e.g. 03,14,05 etc
So if your inspection lot belongs to these stock ir-relevant inspection types then there will be no chance of any stock posting there.
But if the inspection lot belongs to the inspection type from Stock relevant types then there must be the "Post to Inspection stock" indicator will be off for it in Inspection set up>QM view>Material Master.
Regards,
Shyamal -
"inspection lot stock" tab grey out
Dear Gurus,
I am facing subject problem while completing UD. In QA32, i have recorded results, then accepted the lot under "partially rejected" option. I want to post some of the stock qty to UR and rest to Blocked. But as all the fields are grey out, i am not able to do so. I can only clist on "propose" button, by which all the stock can move to UR.Is this an authorsation issue?
Request to guide me.But as all the fields are grey out, i am not able to do so. I can only clist on "propose" button, by which all the stock can move to UR.Is this an authorsation issue?
I am sure by this action the status of the inspection lot would have become UD SPCO.
The system in not allowing to enter the stock because of the "stock posting praposal "
In QS51--->agsint the UD code partially rejected -->check whether you have made/entered "stock posting praposal "
as "Post to unrestricted.
If yes then remove it.System will allow to post the stock in different pockets................ -
Want to add new field in QA32/QA11 transaction under inspection lot stock
Dear Experts,
I want to add new field in QA32 transaction under inspection lot stock tab or under characteristic tab.
The reason behind is: Depends upon UD decision i want to assing customer name. So already we are having one Z Report for all the lots against this lot we have to display customer name.
So in order to fetch customer name in the Z report we want to assing customer through F4 selection in the usage decision screen.
I know this is possibe for Make to order scenario, but our senario is make to stock.
Please advice your valuable inputs.
Regards.Hi Sujit,
Can you please elaborate it,coz i'm using the same but if i place the break-point in PBO of sub screen,the break-point won't be triggered.and is there any additional step to get the data from function group? if yes, please explain me indetail.
If possible please provide the sample code for this.
Thanks Inadvance.
Madan
Edited by: Madan.ngt on Mar 3, 2011 7:16 AM
Edited by: Madan.ngt on Mar 3, 2011 7:17 AM -
QA11...Inspection Lot Stock Posting *RQEVA-SGTXT01*
Hi All,
In QA11, on the inspection Lot Stock tab, i m posting some qty for restriction, scrap n all...
i want to know where the item text (RQEVA-SGTXT01)is stored for this.. on which table this is stored..???
Thanks n Regards
Aravindh ManiThanks For ur Reply.
U r talking about the Long Text of Usage Decisions...
But i want to know the text typed in "To Be Posted" Under "Inspection Lot Stock" tab.
U can Post the Quantity for
To scrap 0.000
To sample usage 0.000
To blocked stock 0.000
To new material 0.000
To reserves 0.000
Return Delivery 0.000..
While posting every Qty a Small window Appears and asks for
Reason for Mvmt
Text (this is the text we enter) ..... i want to know where this text is stored
SLED/BBD ...(some date format)
Hope u understand my requirement..
Thanks n Regards
Aravindh Mani
Edited by: Aravindh Mani on Jul 17, 2009 12:16 PM -
Inspection Lot Stock: Post to GR blocked stock
Hi Experts,
During the IQC process (inspection type 01), first I use the 103 to post the stock to GR Block stock (100 pcs), then after the Usage Decision, I post the stock 80 to unrestricted use stock, 20 remain in the GR blocked stock.
So, the 20 stay in the GR Blocked stock, and what can I deal with them? Manually create a inspection lot?>
kiran kumar wrote:
> > Dear GR blocked stock is not plant's own stock.It's a non valuated stock and there are no accounting data for GR blocked stock and it is not possible to post GR blocked stock to QI.
>
> Release the GR blocked stock with 105 mvt type.
>
> Cheers
> KK
Dear KK,
The GR Blocked stock could be released to unrestricted stock by the 105 type while doing the usage decision.
However, in this occassion, this 20 is remained in the GR blocked stock by using the "GR blocked stock" field in the Inspection Lot Stock tab of the QA14.
Edited by: Veryhanhan on Dec 18, 2010 9:15 AM
Maybe you are looking for
-
How to make an assignment block in an overview page read only
Hi Experts, We have the following requirement: In Campaign overview page we need to make the Partner and Product assignment block read only. Can this be achieved through coding or through configuration? Please give detail steps for the appropriate ap
-
My iPod Classic which I rarely uses. I try to refresh it and put new song into it. As I try with iTunes, it runs very slow and show that it had problem, need to restore it. When I tried, it will not and hangs, also slows my HP Win 7 system immensly.
-
Hello, Prepare for an amazingly stupid question....... I have one of the new version Macbook Air's 13 inch version. I also got the 'free' HP printer that came with it whenIi purchased it. I have now finally unpacked the printer, and downloaded the d
-
Content iView With out filter not displaying folder content
Hi! I´m creating a ContentiView with out filter and pointing it to a document Folder, when the user access the iView this message appears: http://oneworld.neoris.net:50000/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fDemaBanorte!2fDemoBanort
-
Select employee id from ldap server
Hello Everyone, I don't know LDAP. Because of sorry. If I say about my question incorrectly, please correct and ask me. I use authentication LDAP server in my APEX application. Employees have username, password and employee_id. Firstly, employee entr