Customer returns report with f.s,and t.s with coding....used vbak,kna1,

hai
my name is raghu i want some information....any one given functional spech....how to write technical spech with coding....plse send as soon as possible
plse some example send to me...
thanks
raghu

tell me
can u have any model ...with f.s and t.s...with coding
plse send i can prepare ...that is urgent
raghu

Similar Messages

How do I delete my email address that is paired with my Droid and replace it with another email address? thanks!

How do I delete the email address that Veriozon Wireless rep paired with my Droid and replace it with a different address?

The easiest way would be to go to menu>settings>accounts & sync, select the account (I'm assuming you're referring to your gmail account, so select google), then press the remove account button at the bottom. You may lose all your contacts and other data associated with your google account, possibly even your apps, so be aware of this beforehand. You can then add the new account from the accounts & sync menu.
If you are willing to completely start over with your phone, another alternative would be to factory reset it (menu>settings>privacy>factory data reset). This will return your phone to an out-of-the-box condition, and you can use a different gmail address if you like.

I have 12 core with Quatro 4000 and 5770, I want to use dual monitor setup, monitors are NEC with Spectraview-II. How do I connect? 4000 only has 1 Display Port and 1 DVI. 5770 has 2 of each, if I use both 5770 Display Ports, does the 4000 contribute?

I just bought a 12 core with Quatro 4000 and 5770, I want to use dual monitor setup, monitors are NEC with Spectraview-II. How do I connect? 4000 only has 1 Display Port and 1 DVI. 5770 has 2 of each, if I use both 5770 Display Ports, does the 4000 contribute any work at all? I read where on a PC they would work together, but on a MAC they do not.
I read that Display Port has higher band width than DVI, NEC monitors for best performance they recommend using DIsplay Port.
When I was setting this up I looked at a Nvidia Quadro 4000, unfortunately it was for PC, it had 2 Display Ports, in the Mac version they reduce it to one. I did not think there could be a difference.
Mainly want to use it for CS6 and LR4.
How to proceed???
I do not want to use the Quadro 4000 for both, that would not optimize both monitors, one DP and 1 DVI. Using just the 5770 would work but I do not think the 4000 would be doing anything, and the 5770 has been replaced by the 5870.more bandwidth.
Any ideas, I am a Mac newbie, have not ever tried a Mac Pro, just bought off ebay and now I have these problems.
As a last resort I could sell both and get a 5870. That would work, I'm sure of that, it's just that I wanted the better graphics card.
Thanks,
Bill

The Hatter,
I am a novice at Mac so I read all I can. From what I understand the NEC monitors I bought require Display Port for their maximum performance. The GTX 680 only has DVI outputs. Difference from what I understand is larger bandwidth with the DP.
You said I have the 4000 for CUDA. I am not all that familiar with CUDA and when I do read about it I do not understand it.
A concern I have is, that if I connect the 2 high end NEC monitors via the 5770, using it's 2 Display Ports I would have nothing connected to the 4000. Is the 4000 doing anything with nothing connected? I read where in a PC system the 2 cards would interact but in a Mac system they do not.
Bottom line, as I see it, the 4000 will not be useful at all to me, since I want a dual monitor set-up.
So far the 5870 seems the best choice, higher band width than the 5770, and it has 2 Display Ports to optimize the NEC monitors.
I'm not sure how fine I am splitting hairs, nor do I know how important those hairs are. I am just trying to set up a really fast reliable system that will mainly be used for CS6 and LR4. Those NEC monitors are supposed to be top notch.

With iOs 7 and the iPhone can someone use the phone while also using a communication app such as Speak It or Assistive Chat? These are text to speech systems for people who cannot speak well. Thanks you!

With ios 7 and the iPhone can someone use their phone while also using a text to speech app, such as Speak It or Assistive Chat? These apps are used by people who have difficulty with speech production.
Thank you.

My iPhone 5 wouldn't start after I turned it off a few minutes after writing this. It went into recovery mode and I had no choice but to connect to iTunes on PC and restore.
I restored to factory setting first, just to validate my phone was okay. For a second consecutive iOS update, the iPhone 5 did not update smoothly while connected to PC and iTunes - I had to retry two times before the progress bar for the update showed. (The exact same problem with the restart occured when I updated to 7.0.4.)
The good news is that I was ultimately able to restore the iPhone 5 to factory settings while running iOS 7.0.6. I did have a backup from about a month ago lying around and was able to successfully restore with that as well, so the damage done is almost negligible since I had my contacts, notes, mail, etc. backed up to iCloud.
Once I completed both restores, the sync with iTunes worked fine.

I have a MacBook Pro 15" and my warranty just ran out! I partitioned my harddrive into two partitions, one with Snow Leopard and the other with microsoft.This morning I turned on my Macbook Pro and it will not boot into Snow Leopard.

Good Morning,
I have a MacBook Pro 15" and my warranty just ran out! I partitioned my harddrive into two partitions, one with Snow Leopard and the other with microsoft.This morning I turned on my Macbook Pro and it will not boot into Snow Leopard. I shut it off took out the battery, reinstalled the battery. Then I put in the Snow Leopard CD and booted up to disk utility and The Snow Leopard partion would not show up?? I do see the microsoft partion.
I also rebooted holding down the shift key and still no Snow Leopard
Could you please tell me what I can do, what keys do I press on restart any advice to get Snow leopard back.
thank you.

Have you restarted holding down the Opt key? That procedure should give you a gray screen with all of the partitions that exist. Then select the SL partition for boot. Also go to System Preferences and Startup Disk, unlock the lock and select the SL partition as the default boot partition, then relock.

How to create a matrix with constant values and multiply it with the output of adc

How to create a matrix with constant values and multiply it with the output of adc

nitinkajay wrote:
How to create a matrix with constant values and multiply it with the output of adc
Place array constant on diagram, drag a double to it, r-click "add dimension". There, a constant 2D double array, a matrix.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV

HT4550 Why does my Safari open with American version and home page with Apple iPhone 5 advert even though I have changed them in preference

Why does my Safari open with American version, and home page with Apple iPhone 5 advert even though I have changed them in preferences, it happens every time no matter how many times I change them, when I open Safari its back to the USA and Apple home page.

Try this.
Hold the shift key down and launch Safari.
Best.

When I publish a SWF/HTML5 module with Captivate 8 and try to run it using IE9 - I get the following error "The content you are viewing is not supported in the current Document Mode" - anyone know why?

When I publish a SWF/HTML5 module with Captivate 8 and try to run it using IE9 - I get the following error "The content you are viewing is not supported in the current Document Mode" - anyone know why?

TLCMediaDesign wrote:
I've seen a lot of threads about getting rid of these kind of messages. Those messages are there for a reason most of the time. If you have CSS animations or other HTML5 standards that cannot be rendered in IE9 they won't magically start working becuse you got rid of a message. I use IE9 since that is the minimum standard for the client. I have never seen that message publishing to HTML5 content.
IMO, if your client has IE9 I think that you should develop with IE9 in mind not IE11.
When you say "develop with IE9 in mind not IE11" do you mean use SWF instead of HTML5? I used the standard question types, and a converted PowerPoint presentation. I didn't add anything out of the ordinary.

I synced my iphone with my PC and now I can't use my apps on the phone. All software is up to date. Any suggestions?

I synced my iphone with my PC and now I can't use my apps on the phone. All software is up to date. Any suggestions?

Did you check the box that says 'Synchronize Apps'? This happened to a friend and after she enabled this synchronization she was able to use her apps as she did before.

As I heard, If i get an unlocked iphone 5s, I can use it with my Wind Mobile which i have to have a $40 monthly plan for it. So, I want to buy an Iphone 5s that I can use it here with Wind Mobile and in turkey with my turkish line tht supoprts Iphone.

As I heard, If i get an unlocked iphone 5s, I can use it with my Wind Mobile which i have to have a $40 monthly plan for it. So, I want to buy an Iphone 5s that I can use it here with Wind Mobile and in turkey with my turkish line that supports Iphone. So, is it possible that I can purchase an Iphone 5s that will be usable within Canada and Turkey? Im asking because, In Turkey, you need to register the Imei of the phone on your Passport to use it. Also, if i buy an unlocked Iphone 5s, will I be down to use it anywhere with any line?

I dont know if you know the procedure in Canada and Turkey. Wind mobile wasnt supporting Iphones until they decided to let people use Iphone 5s with their $40 plan.And as i know, Turkey is the only country that asks you to register the imei on your passport to use it. So, most of people did not know it. so procedures are changing country by country. Are you sure that If I buy an Iphone 5s from a canadian apple store, use it with my wind mobile line and the turkish line in Turkey?

Create prompt with date-filter and initialize it with current date

Oracle BI 11 g
Hi!
I need to create dashboard prompt with date-filter and initialize it with current date. How can I do that?
I tried to create repository initialization block and add variable. But I don't know what should I write to DataSource? I tried to use functions Now(), Current_Date, sysdate (for example, SELECT Now() FROM tbl_Calendar) but without results - when I pressed "Test..." button I got errors - something like "Now() is unknown function" or "Incorrect syntax near key word Current_Date".
After that I tied to use Presentation Variable in Prompt, but also without success ((
Please, help me.

I've created Repository Variable "CurrentDate", using SQL-query like this "select convert(varchar(10), getdate(), 104)" and now this variable is being initialized by value "07.04.2011". But I don't understand how to use this varible in DashboardPrompt! What item in list "Default selection" I should choose - "Variable Expression", "Server Variable" or something else? When I chose "Variable Expression" and write "CurrentDate" I got just string "CurrentDate" when preview Prompt. @{CurrentDate} gave me the same result.

Want to create a user field with type alphanmumeric and structure text through coding

i want to create a user field with type alphanumeric and structure text through coding.am using vb
plz help me

Hi.
Please take a look at samples in SAP B1 SDK.
Dim oUserFieldsMD As SAPbobsCOM.UserFieldsMD
oUserFieldsMD = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserFields)
' Adding "Name" field
'// Setting the Field's properties
oUserFieldsMD.TableName = #YOUR_TABLE_NAME#
oUserFieldsMD.Name = "Name"
oUserFieldsMD.Description = "Name"
oUserFieldsMD.Type = SAPbobsCOM.BoFieldTypes.db_Alpha
oUserFieldsMD.EditSize = #LENGTH_OF_FIELD#
'// Adding the Field to the Table
lRetCode = oUserFieldsMD.Add
GC.Collect() 'Release the handle to the User Fields
Hope it helps.
Regards,
Pawel

Bug Report: Static LOV's and PDF Printing with Tabular Forms

I have a tabular form, which acts as an editable report. Some columns are 'Standard Report Column' and some are Select Lists, using Static LOV's with the contents of
Yes;Y,No;NThe purpose of the page is to allow users to edit yes/no attributes of a row. Then, they can print the report.
To make the current sort of the report reflect what is being printed to PDF, I've used a Report Layout associated with the report region, as oposed to a report query. A report query in this case would not reflect the sort of the report (all columns are sortable asc/desc).
Anyway, I link my report with the layout created, and go to run it. I get this message.
ORA-06550: line 1, column 50: PLS-00103: Encountered the symbol "," when expecting one of the following: := . ( @ % ; The symbol ":= was inserted before "," to continue.
     Error      ERR-1000 Unable to determine LOV from "declare function x return varchar2 is begin Yes;Y,No;N return null; end; begin wwv_flow_utilities.g_query := x; end;".
OK
report error:
ORA-20001: Error fetching column value: ORA-01403: no data foundI'm guessing the product is trying to take my static LOV and place it in a function to be able to generate which value is being displayed as text, from the select lists. However, it doesn't work.
I've been able to get around it - by adding a YES_NO domain to my domain_codes table (a table which associates abreviations with full meanings), I can set by select lists to be query based select lists using the SQL select code_meaning, code from domain_codes where domain = 'YES_NO_CODE'. This still allows the user to dropdown Yes/No fields, and the PDF printing doesn't break.
It is just me, or can't the PDF printing handle static LOV's in tabular forms/reports?

Hi Patrick.
I've tried STATIC:Yes;Y,No;Nwhile stating it is a Select List (static LOV). The values that are rendered on the page are
[STATIC:Yes]
[No        ]
----------I tried the same thing with STATIC2 instead of STATIC, and the same thing happened.
It also broke if I tried STATIC or STATIC2 under Select List (query based LOV). This is within a report where there is no hyperlink to say 'Create/Edit static list' or 'Create Dynamic List', as there is under select list items.
However, I am finding that for some reason, the values being sent to the PDF are not the values in the database (Y/N), but the showing values (Yes/No). This happens when I use the domain_code select query as the query based LOV.
Furthermore, I cannot get any columns not rendering on the page to be generated in the PDF. I have a column that groups items depending on values, and I want this grouping to display in the PDF instead on the original value, ideally.
Cheers,
K.

Returned to store for service and ended up with New computer

I returned my MacBook Pro 2.0 to my Apple Store for a New top case due to mouse problems. The part took over 3 weeks to come. They said it would take about 30 minutes to fix. After about 2 hours had gone by I started getting nervous. they finally came out and asked me if I was having any other problems with it and I said other than it ran warm none. They tried to boot it and it would start and then stop. They also said the fans were starting but then turning off. They captured the comptuer and gave me a new one. Serial on this one was a week 15 my old one was 8606. My first one had no whine and neither does this one although this one seems to run cooler by far. I also played with a 17" while I was there and that was running cooler than my first MacBook. Anyways they did right by me and I am very pleased.

I do have my thesis backed up on a disk, and have been trying to work on it when I get a chance. My issue right now is that I work 55 hours a week, and all of these are when the computer labs at my school are open. The only current option I have been able to come up with is to use my girlfriends computer when she is not using it, but she is a Law school student and working on her own papers at the moment.
It kind of sounds like I am up a creek right now. I purchased my MBP becasue of a bad experience I had with Dell after getting a computer stolen last year, having actual people and a store to go to was a big draw for Apple for me. I so far have been happy with the service I have gotten with my MBP and the Applecare plan, I guess it is just my past history with computers that worries me.

Hello i have purched new computer with windows 8 and cannot sync with my ipod nano

hello I have a new computer with windows 8 and itunes works perfectly however it will not sync with either of our ipods.

Hey azduck,
Thanks for the question. I understand you are having issues syncing your iPod nano with iTunes for Windows. The following articles may help to resolve your issue, based on your symptoms:
Windows
iPod appears in Windows but not in iTunes
iPod not recognized in 'My Computer' and in iTunes for Windows
iTunes reports that "iTunes cannot recognize this iPod at this time"
Additionally, you may find the following article helpful:
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/PH12313
Thanks,
Matt M.

Customer returns report with f.s,and t.s with coding....used vbak,kna1,

Similar Messages

Maybe you are looking for