Customer's name in stock transfer order

I need to add actual customer's code in stock transfer order so that material can be despatched from depot to only those customer for which that material is transfered to depot. if it is possible, kindly provide me solution. thanks in advance. requirement is on priority basis.

Hi,
You definitely need a customer number in your STO order to do the delivery. Follow the below steps to get the same.
1. Create the concerned depot as a customer.
2. Go to the follwing path and give the customer number created and the sales area to trigger the customer number in your STO. SPRO -> Materials Management -> Purchasing -> Purchasing Order -> Setup stock transport Order -> Define shipping data for plants.
3. Finally, in the above said path go to Assign delivery type and checking rule and give your PO Type, Supplying Plant, Delivery type and the checking rule to complete the STO configurations.
These steps will definitely help you in getting the required customer number.
Regards
Vijay

Similar Messages

Urgent Condition Tab Missing In Stock Transfer Order

Hi All ,
When I a m creating Stock Transfer Order from One Plant In one Company Code to Another Plant in another Company code the Invoice and Conditions Tab Is Missing .
How to get the Conditions tab, Do I have to do any Customization ?
Please suggest me of how to go about .....
Regards ,
Sriram.

Hi Srirama,
Yes, if you have only one Calculation schema then there is no meaning in assigning to different Porgs.
In that case please proceed with the following configuration.
This is done in customizing; IMG for MM > Purchasing>Conditions>Define Price Determination Process>Define Schema Determination>Determine Schema for Stock Transport Orders
For the combination of the Schema POrg; doc.type( UB ) and Supplying plant
you must specify the price schema to be used.
Hope this will solve your problem.
Regards,
DilliB

Open Qty is not copied in Delivery for Stock Transfer Order

Hi,
In the Stock Transfer Order process, Once the STO Order is created, I am creating delivery in the transaction VL10B or VL10G.
When I am clicking the background button Delivery gets generated. Then when i am going in the transaction VL02N and increasing the delivery Quantity which is more than STO order quantity, the system is accepting it. But i want the system to throw an error message if the delivery quantity is more than the order qauntity. For this I have made the following settings.
In the Transaction Code 0VLP, i have selected B in Check Over Delivery field. But still it is not throwing an error.
The reason for the same may be, the system is not copying the Open Delivery Qty from the STO Order (Which normally happens in Sale Order to Delivery process, bcos of Copy Control). This field has 0 value. So the system is not able check for over delivery.
If I get this value in the delivery then it should be working fine and the sytem will throw an error for over delivery.
Can you please suggest me a way to get this open qty value in delivery for STO order or suggest me some other option to check for over delivery in STO.
Regards
Vijay

Dear Friend,
If I can understand you clearly.
to achieve your task the best way you can sit with your abaper and configure a routine and assign the same to T-code OVLK delivery type customizing :
In the Item requirement : Generally it is 202
reward points if helpful,
regards,
Amlan

RE: Intercompany stock transfer order process

hi SD Experts,
I really appreciate if anyone explain me how to execute Intercompany stock transfer order with intercompany billing scenario.
I used T-Code ME27, but unable to do delv and intercompany billing
thanks in advance
regards
vaseem

hi
Material should exist in both the plants (Delivering & Ordering),
Internal customer should be assaigned to the ordering plant ( MM -> Purchasing -> Purchase Order -> Setup stock transport order -> assign the internal customer to the ordering plant and assign the Sales area of the internal customer.
Assign its Sales area to the delivering plant
Assign the document type and Delivery type NB and NLCC
Assign the Supplying plant --> Receiving Plant --> NB
Take the delivering plant and assign the sales area.
Vendor master has to be created and assaign the supply source ( Delivering Plant).
Create a puchase order ME21N ---> Save
Delivery VL10 G ---> Calculation rule (appropriate) --> Assaign the purchase order number here and execute.
Select the Delivery creation line and do the back ground process.
Start the log display and see the delivery document number by the documents button
Goto VL02N --> do picking and PGI --> Then do the MIGO with respect to the delivery document.
Billing (Intercompany pricing conditions should be set).
rewards point it helps

Stock transfer order

Hi Gurus,
While doing Stock Transfer order - assigning deliverying plant
to sales organisation : I could not assign and message is giving :
"The sales org is part of company code Z222, Plant Z223 is part of company code Z223. Organization data for inter company billing missing in plant Z223."
For you kind information :
I have maintained regular enterprise structure ie everything is Z222 means comp code, plant, shipping point etc. for my memory.
Stock transfer order step
Step 1 I maintained another enter prise structure ie. everything is Z223 company code, plant etc.
Step 2 Intercompany billing customer, I assignd customer no. in relevant sales org ie, Z222
Step 3 I am assigning deliverying plant ie Z223 to sales organisation ie Z222 but I could not assign, the message has come.
Kindly anyone help me out.
Thanks
rakesh

Hello.
Go to SPRO --> Materials Management ---> Purchasing ---> Purchase Order ---> Set Up Stock Transport Order --> Define Shipping Data for Plants. Select the ordering plant (Z223) and assign the intercompany customer, and the sales area of the deliveing plant.
Once you maintain this try to assign the Delivering plant (Z222) to Ordering sales organisation (Z223) and Distribution channel.
Prase

Problem on creation of Outbond Delivery for Stock Transfer Order

Hi all,
We have problem on the creation of Outbond delivery for stock transfer order because the system doesn't group in a unique delivery for different items of a STO order.
We used VL10B or VL10D but the behaviour is the same. Even if we have to handle few items of the Stock Transfer order already scheduled, the scope is to create a delivery which group everything while the system split in several delivery notes.
Could you advice me the way to set in customizing , master data I don't know where else , the rules in order to avoid to split deliveries for STO.
Secondly if we have already created a delivery note is it possible to add a further purchase order item as in sales order processing?
Thank you for any suggestion you will give
Andrea

Dear Kripa,
the first point has been solved. We have checked a SAP Note 386340 which is appropriate to this case.
The second point, the one referred to the additional items to an existing delivery note, is not yet closed and I would like to know further advices from you and the other guys connected to the forum in order to help us to solve the problem.
Thanks for your help
Andrea

STO Stock Transfer Order with HU (Handling Units) - Error Hugeneral 319

Hello,
We implemented a Stock Transfer Order process with the following details:
MM side
- PO is type NB, supplier is F_8001;
- In table T001W, supplier F_8001 is assigned to plant 80GP;
- WERKS = 40TV and LGORT = 41P in all PO items;
- In each item, the shipping tab is filled with NLCC as delivery type and customer C_4000 (this customer corresponds to plant 40TV in table T001W). The sales area is also defined as the sales area to be used in the sales order that will be created in plant 80GP;
SD side
- Sales order is created automatically for customer C_4000;
- In plant 80GP we have a HU managed stloc (32P). In this stloc we have a HU with the exact contents of the sales order. This HU has X in the HU storage loc field;
- We created the outbound delivery and chose our HU. From this moment the HU storage loc field changed to D and the HU was assigned to the delivery;
Now for the problem:
When we click Post Goods Issue button, we get the following error for each item:
HUGENERAL 319 - HU item contains different data than the stock posting
The HU contents are exactly what we need to ship, so we do not understand this error. We need this HU to be transfered to stloc 41P in plant 40TV (this stloc is also HU managed). Any clues?
Thanks in advance,
Joã

Hi,
Have you checked your HU material and material to packed both having stock in Inventory.
Even check the table HUMSEG is correctly updated or not.
check this table correctly Hu assignd to you material and created materil document or not.
check for for material master clearly for both material like plant, storage location, batch etc..
Ask your MM consultant to check all entry is correct in material master and delivery or not.
Regards
Karthik.

Transaction to see the Open stock transfer order for the plant

HI ,
i need to develop one report in that client to make the report for the all open stock transfer order & the cost of the open stock transfer order for the plant .
I need how to cretae the stock transfer order for the material , whci material master is required for this process.
please give me step by step details for this .
regards
satish
Edited by: satish kapartiwar on Jul 16, 2009 9:33 AM

Hi Satish,
You can see open stock transfer quantity in MB5T and stock value in MB5L. If you want to make stock transfer, there is two types intra company transfer(with in same company code) and inter company transfer (different company codes).
Steps for Intra company stock transfer:
This is only within the comp.code(w/o SD)
(w/o SD) 351101 MvT. and (with SD) 641101
1. Mat.(1434)should be maintained in both the plants.(@1000&1100).
2. Should have enough stock in supplying plant(1000).
3. Make its supplying plant as a vendor in vendor master record in receiving plant(1100).
4. Make it receiving plant as a customer in customization.
Create customer (xd01) & and define the shipping data for plants in both the plants.
Path: spro u2013 img u2013 material mgmt u2013 purchasing u2013 po u2013 set up STO u2013 define shipping data
(1 by1 )
In Receiving plant (1100)
Customer num. 123345 (for ex.)
Sales org. yyy
Dist. Channel yy
Sales div. y
In Supplying plant (1000)
Customer num. -
(don't fill)
Sales org. yyy
Dist. Channel yy
Sales div. y
5. Assign doc. Type is "NL" for intra company STO. If STO is inter company, Assign doc. Type is "NLCC".
Position doc type is "UB"
Enter supplying plant(1000) & doc type (NL)&checking rule (ex:01)
6.Assign doc. Type is "UB" to u'r plants.(PO)
Go for new entries
Enter supplying plant(1000) & Receiving plant (1100)&doc type (UB).
7. Create a PO, choose the doc type is 'UB' & item cat.'U', Enter supplying plant as a vendor in PO of the receiving plant(1100).
8. Provide this num (PO) to SD people, they will do the delivery by using transactional code is VL10B.
9. Sales people they will provide "out bound delivery num".
10. Do the GR. In GR the second tab 05 outbound delivery instead of PO mov.type 101.
11. See the stock overview in the receiving & supplying plants.
Steps for Inter company Transfer:
1) Create one Customer Master in XD01 with respect to Supplying Plant Sales Area and assign this Customer no with Receiving Plant in OLME->PO-> set up STO->Define shipping data for plant and for the supplying Plant assign the above sales area.( Make sure, In Customer Master, sales Area Tab: you are maintaining shipping condition)
2) For Receiving Plant Pur. Org and Co.Code Combination create Vendor master in XK01 and in this vendor master assign the Supplying plant in Pur.Org.Data screen->Extras--> Add.Pur.data
3) OLME->PO-> Set up STO------>For your supplying plant assign document type NB, Delivery type NLCC and Checking Rule RP
4)then For your supplying Plant and receiving Plant assign Document type NB
5)Make sure you are maintaining Sales View for the material at supplying Plant and in Sales /Gen plant Data view maintain Availability check, Loading group and Transportation group.
6) In SPRo-->Logistics execution> Shipping->Basic shipping functions->Shipping point Determination>assign shipping points-> For your Loading group, Shipping Condition and Supplying plant combination, Assign shipping point
these are the configuration settings you have to do in background.
Then Create STO from Receiving Plant in ME21N with document type NB.
Based on that STO, Create Delivery in VL10B from supplying Plant
Do PGI in VL02N from Supplying plant
Do GR in MIGO at Receiving Plant keeping Outbound delivery as a ref. document.
Now your STO bet. two plants belongs to diff. Co.Codes will be completed.
Regards,
Prasath

Stock transfer order excise

Dear Experts,
Can i know wt are the special things comes in stock transfer order excise compare to domestic excise process?
i know abt domestic excise invoice process.. pls let me knoe the process of stock transfer order-for excise --
Regards
ishikesh

Do the following steps for STO Customizing:-
1. Create a customer master record for the issuing plant.
2. Create a vendor master record for the issuing plant, and enter customer account number in the Customer field on the Control screen.
3. Repeat steps 1 and 2 for the receiving plant.
4. Assign the plants to the customer master record in Customizing for Materials Management (MM), by choosing Purchasing <Purchase Order < Set Up Stock Transport Order< Plants.
The Process Flow would be as follows :-
Create a stock transport order, following the standard procedure, and send the order to the issuing plant.
Issuing plant has processes your order, and when it is ready to ship,the storeperson at the issuing plant issues the goods using a transfer posting. The excise clerk there creates an excise invoice.The excise supervisor verifies and posts the excise invoice.It then sends the goods to you, together with the excise invoice.
Once the goods arrive, you follow the standard procedure for incoming excise invoices:
The excise clerk captures the excise invoice, using the stock transport order as the reference document. The storeperson enters the goods receipt, again using the stock transport order as the reference document.Alternatively, you can first enter the goods receipt and then capture the excise invoice.
The excise supervisor then posts the excise invoice.
Best Regards,
Ankur

Stock transfer order process

Hi Experts,
can anybody provide me the Configuration and Easy Access steps to be taken to set up the stock transfer order? Please help me as I need to configure this at the customer site.
Thanks in Advance.

hi
Material should exist in both the plants (Delivering & Ordering),
Internal customer should be assaigned to the ordering plant ( MM -> Purchasing -> Purchase Order -> Setup stock transport order -> assign the internal customer to the ordering plant and assign the Sales area of the internal customer.
Assign its Sales area to the delivering plant
Assign the document type and Delivery type NB and NLCC
Assign the Supplying plant --> Receiving Plant --> NB
Take the delivering plant and assign the sales area.
Vendor master has to be created and assaign the supply source ( Delivering Plant).
Create a puchase order ME21N ---> Save
Delivery VL10 G ---> Calculation rule (appropriate) --> Assaign the purchase order number here and execute.
Select the Delivery creation line and do the back ground process.
Start the log display and see the delivery document number by the documents button
Goto VL02N --> do picking and PGI --> Then do the MIGO with respect to the delivery document.
Billing (Intercompany pricing conditions should be set).
rewards point it helps

Reagrding Stock Transfer order single step

Hi sap gurus,
Could any body let me know with example of Transaction " stock tranfer order one step".
Thanking you

Hi,
STO Process (Within Company code without SD)
What is the process of creating the stock transfer order? W hat is the essential inputs of stock trans. order?
This is only within the comp. code (w/o SD)
351+101 MvT.
with SD
641+101
1. Mat.(1434)should be maintained in both the plants.(@1000&1100).
2. Should have enough stock in supplying plant (1000).
3. Make its supplying plant as a vendor in vendor master record in receiving plant (1100).
4. Make it receiving plant as a customer in customization.
Create customer (xd01) & and define the shipping data for plants in both the plants.
Path: SPRO u2013> IMG u2013> MM u2013> Purchasing u2013> PO u2013> set up STO u2013> define shipping data
(1 by 1)
In Receiving plant (1100)
Customer num. 123345 (for ex.)
Sales org. yyy
Dist. Channel yy
Sales div. y
In Supplying plant (1000)
Customer num. -
(donu2019t fill)
Sales org. yyy
Dist. Channel yy
Sales div. y
5. Assign doc. Type is u201CNLu201D for intra company STO. If STO is inter company,
Assign doc. Type is u201CNLCCu201D.
Position doc type is u201CUBu201D
Enter supplying plant (1000) & doc type (NL) & checking rule (ex:01)
6. Assign doc. Type is u201CUBu201D to your plants. (PO)
Go for new entries
Enter supplying plant(1000) & Receiving plant (1100)&doc type (UB).
7. Create a PO, choose the doc type is u2018UBu2019 & item cat. u2019Uu2019, Enter supplying plant as a vendor in PO of the receiving plant(1100).
8. Provide this num (PO) to SD people, they will do the delivery by using transactional code is VL10B.
9. Sales people they will provide u201Cout bound delivery numu201D.
10. Do the GR. In GR the second tab 05 outbound delivery instead of PO mov. type 101.
11. See the stock overview in the receiving & supplying plants.
Regards,
Pardeep Malik

PO or Stock Transfer Order

Hi,
We have One company with a plant and another company with a sales organization. Which is better
     option between these - PO or Stock Transfer Order ?
Thanks,
Neelam.

Hi,
Cross company Stock Transport Orders can be done.
   1. Configure using transaction OMGN.
   2. Depending upon the sending and receiving plants, maintain sales organization and customer data
   3. in customizing. Maintain the supplying plant as a vendor and attach the plant to the vendor in the Vendor Master.
   4. Material type has to be HALB or HAWA.
   5. Ensure that the company with sales Organization has a plant to take care of stocking.
   6. The PO used is NB and not Stock Transfer PO.
   7. Configure SD for inter-company billing to enable picking up the pricing procedure for billing.
   8. Carry Out delivery through process delivery due list and billing through process billing due list.
Reward if helpful...
Cheers,
Asif.

Query of stock transfer order

Hi experts
I created a cross-company stock transfer order. I use the standard po type.
after creating the po. I use vl10b to create outbound deliver. no issue this step
then I met problem when doing post goods issue. system gave the error message as following
Purchase order 4500000123 does not contain items for a stock transfer
Message no. M7153
Diagnosis
The system did not find any item for a stock transfer in purchase order 4500000123.
Possible causes of error:
You have entered the wrong purchase order number.
The purchase order you have entered is not a stock transport order and the item category of the purchase order items is not U.
The purchase order you have entered is not a standard purchase order for cross-company-code stock transfers.
You can only post goods issues for stock transport orders belonging to this order type in the Sales and Distribution system (SD). You cannot enter the goods issue in Inventory Management.
Procedure
Check whether your input is correct.
Check whether the purchase order is a stock transport order with item type U or a inter-company-code stock transfer.
Perform function
If you have authorization, check in Customizing for Purchasing whether goods issues for stock transport orders in the plant with this purchasing document type are to be posted in the Shipping system or in Inventory Management. If a delivery type has been entered in the Customizing table, the goods issue takes place in the Shipping system.
In Customizing, choose:
Materials Management -> Purchasing -> Purchase Order -> Set Up Stock Transport Order.
could anyone give some suggestion?
thank you

Hi,
check in the same node at customising whether you have assigned a document type for issuing plant(also whether its one step or two step) and also you have to assign a delivery typr for your issuing plant (NLCC).
you have to asssign a customer master in the receiving plant shipping data and sales area details for your issuing plant.
Reg,
Deepak

Could not create Purchase Order Stock Transfer Order

Hi Expert!
Need your help.
User could not make Could not create Purchase Order Stock Transfer Order for new plant 1075 & 1076 at P05 with error message Not posible to determine shipping data for material. Our new vendor are 510022060 for new plant 1075 and 510022061 for new plant 1076.
The problem was caused by the missing STO setup for these two plant 1075 and 1076, as no customer code being referred.
Now i got the customer number for these two plants but how to set it up in configuration? Please guide me step by step.

Hi Crystal,
The following customising need to be carried out for Inter Company Stock Transfer.
Path : sproMaterials ManagementPurchasing-Purchase OrderSet up Stock Transport Order
Define Shipping Data for Plants :
For the Supplying plant (1) the Sales Org data to be maintained.
For the Receiving plant (2) the Customer No to be maintained.
Create Checking Rule - U can use existing one Eg : B
Define Checking Rule : Use Standard one Eg :01 linked to B.
Assign Delivery Type and Checking Rule -- For the Supplying Plant (1) and document type NB use the delviery type NLCC and Checking Rule B.
Assign Document Type, One-Step Procedure, Underdelivery Tolerance :
For the supplying Plant (1) and Receving Plant (1) ; assign the document type : NB.
Points to be noted :
The Material should exists in both the plants ( 1 & 2 ) with the sales view maintained . Note that the Loading grp / Transporting Grp is mantaory in Sales Views.
The Vendor is to be assigned to the supplying Plant (1 ) in Purchasing View of Vendor Master.
For that click on Extras - Add Purchasing data in Purchasing view of Vendor Master (XK02 )
Do maintain the customer in Control data of Vendor Master.
Do maintain the Vendor in Control data of Customer Master.
Also note that shipping conditions are maintained in the Customer Master . The same can be found in Sales Area - Shipping Tab.
Shipping Point determination :
SPROLogistics ExecutionShippingBasic Shipping FunctionsShipping Point and Goods Receiving Point Determination--Assign Shipping Points ( For a particular Shipping condition/ Loading Grp /Plant - the shipping point is assigned ).
Regards
Ramesh Ch

Stock transport order v/s stock transfer order

Hai
What is stock transport order and stock transfer order?
Is there any difference?
If so what is the basic difference?
What are SD configurations needed for configuring Stock transport order and stock transfer order
Regards
Raja

Hi,
A. STO is stock transfer order.it is used when stock is transferred from storage location to storage location or plant to plant..
Configuration Settings:
1. Create Internal Customer
2. Create Vendor (Transport Agent) 3. Set up Stock Transport Order by going to IMGMaterials ManagementPurchasingPurchase Order Set up Stock Transport Order
B.there is no stock transport order in SAP. it is Transport Order which will be used in automatic picking..whenever goods shoul be picked from ur warehouse TO is used..
Logistics execution->shipping>picking>lean wm-->there u can find number ranges for TO.
u can create TO by using T-code LT03...
Hope it will clarify ur doubts..
regards..
yogi..

Customer's name in stock transfer order

Similar Messages

Maybe you are looking for