Customer sales area data not replicated to CRM

Hello,
I'm setting up the data replication model for master data based on configuration guide C03.
We have the following customer master situation:
existing customers with nr range 500000 - 599999 and account group A are created in ERP and replicated to CRM.
new customers with nr range 600000 - 699999 and account group B are created in CRM and replicated to ERP.
PIDE settings are fine.
The initial download of CUSTOMER_MAIN en CUSTOMER_REL went well. I've set a filter in CUSTOMER_MAIN on field KUNNR: value between 500000 - 699999. Everytime a sold-to business partner is created in CRM or a customer is created in ERP, the data gets replicated to the other system.
So far so good.
But here comes the problem: when I assign a sales area to a customer created in CRM (nr range 600000-699999) in ERP, the sales area data is NOT replicated back to CRM. When I assign a sales are to customer created in ERP (nr range 500000-599999) in ERP, the sales area is replicated back to CRM.
Do I have to run BUPA_MAIN? I don't think so, because sold-to business partner are already replicated to ERP.
Is the filter in CUSTOMER_MAIN not good? Should I split the nr ranges into 2 rows: 500000-599999 and 600000-699999 instead of 500000-699999
System environment:
CRM 7 EnhP2 (CRM RDS)
ERP 6 EnhP6
Kind regards,
Koen

Hello,
I found the problem. The PIDE was not set up completely: I only set the account group for ERP customer in the 'R3-->CRM' dialog structure. I've added the account group for CRM customers as well, and now customer data of CRM customers added in ERP, is replicated to CRM.
Cheers

Similar Messages

  • Sales Area Data isnt replicating from CRM to ECC

    Hi Gurus,
    We are replicating some BPs of certain groupings from CRM to ECC.
    We performed all steps relevant for this task mentioned in Best Practice u201CMaster Data Replication C03u201D. After performing the
    steps results are as follows:
    u2022     BP General Data is replicating without any trouble.
    u2022     When registering sales area data in CRM and trying to get this replication to ECC we see that the BP Sales Area data isnu2019t replicated.
    Monitoring SMW01.
    The BDOC BUPA_MAIN ended with the following error:
    Messages for business partner 0007000362: Fill in all required entry fields
    Action already taken:
    After reading this message I have reviewed the mandatory fields per Account Group in ECC and mapped them with the CRM ones. Even this changes I still can get sales area data in the ECC BPs replicated.
    Is there something I am missing here.
    Thanks for your help.

    Hi,
    Regarding debugging from CRM to R3. Please follow the below steps.
    There are 2 methods to debug the Business Partner (BP).
    First Method:
    1)     In CRM, Go to SM59 -> ABAP Connections => The ECC client -> See if the saved user (in logon details) that is used to connect to ECC from CRM is a Dialog user.
    2)     You can use transaction code SU01 to check User Type of User.
    3)     Deregister the Queue through SMQS.
    4)     Make changes to BP.
    5)     Go to SMQ1, Select the Queue name Double Click 2 times then select the Tool bar (Debug LUW).
    Second Method:
    1)     Put a break point in Function Module SMW3_MFLOW_UPDATETASKBDOC.
    2)     Create a BP and before save, type /h to activate debug, Mark update debugging option.
    3)     When stops in Function Module u201CSMW3_MFLOW_UPDATETASKBDOCu201D you must be sure to set header-dbgmode = 'X' this will make the BDoc stay stopped in SMW01.
    4)     Go to SMW01 and type /h and process the BDoc.
    5)     Put a breakpoint in Function Module u201CCRM_UPLOAD_AFTER_MAP_HANDLERu201D and be sure to change LV_SYNCHRON = 'X' this will allow you to connect in ECC.
    If the variable LV_SYNCHRON does not have any value, then it will work as background task, if the value is filled with the value u2018Xu2019, then it will allow debugging in R3.
    And another point to be noted here is, the user type of the R3 should be Dialog User. If the user is not dialog, then it will not connect with R3.

  • Fm or BAPI for Change Customer: Sales area data

    Hello All,
    I need to change tax classification in Sales area data of Changing Customer ( transaction XD02 ).
    Function BAPI_CUSTOMERCRM_CHANGE looks like is ok for this, but I've try it and is not working, maybe i'm forgeting something or is not proper for this.
    Do you know a function for this or an sample with BAPI_CUSTOMERCRM_CHANGE ?
    Note: Function must not be for online store and Internet Sales.
    Any help will be appreciated and rewarded.
    Thank you a lot!
    Bogdan

    Hi again,
    Not the BAPI COMMIT was the problem,
    But I found FM SD_CUSTOMER_MAINTAIN_ALL, which is working realy fine.
    All the bests!

  • Sales Area is not visible in CRM for the products downloaded from R/3

    Hi Experts,
    Our client is using CRM 2007 and R/3 4.7.
    connectivity was established via Middleware.
    Before downloading the materials from R/3 we have done the following things
    1. Following customizing objects were downloaded
    DNL_CUST_PROD0
    DNL_CUST_PROD1
    DNL_CUST_PROD3
    DNL_CUST_SALES
    DNL_CUST_S_AREA
    2. Org structure was copied from R/3 using the Tcode - CRMC_R3_ORG_GENERATE.
    3. All the required sales are were correctly maintained( Downloaded ) in the org structure and under attributes tab " Object permitted for determination was selected".
    4. Executed the report HRBCI_ATTRIBUTES_BUFFER_UPDATE.
    After down loading the materials also we have executed the above report.
    But the sales area details are not coming with the product.
    Not: If I try to create a product in CRM I was not able to assign Sales area, ASSIGN button was in disabled mode.
    Could you please guide me to solve this issue.
    Thanks in advance.
    Nadh.

    Hi Nadh,
    Can you please check if all the condition tables are replicated correctly from R/3 to CRM. Eg ZDNL_COND_A805 and DNL_COND_A191.
    I hope the initial download for the same would be completed.
    Because there might be some fields relating to Material and Sales Area in these condition tables, which might not have moved to CRM.
    Thats the reason I am asking to check.
    Thanks.
    Best Regards,
    Arun Sankar.

  • Product sales area data missing in crm

    hi, expert
    I'm currently having a problem with some of the products that are being replicated from R/3 to CRM.Product sales data initial synchronization is complete from ecc to r3,user create order is ok in crm.After a period of time,product sales area data missing in crm,we don't know when is lost,the problem is that we can't do an order for several products because there's no data in the sales and distribution tab(Sales Org., Distribution Channel) of the product master in CRM.

    Hi ,
    What you can do is,
    Create a request for a material whose Sales Area data is missing in
    CRM , and perform the request load in transaction:R3AR4.
    And please check whether sales area data flows to CRM.
    Put a filter in txn:R3AC1, to download single material or material
    range.And before performing an initial load in txn:R3AS,please make
    sure that sales area data is missing in CRM.Now, perform the initial
    load in txn:R3AS.And please check whether sales area data flows to
    CRM.
    Check the  filter settings in transaction R3AC1 for
    object MATERIAL and please make sure that it would bring down all
    the expected materials from R/3 along with the sales area data. I guess there is some
    filter setting which is blocking it.
    Please check the entries you have maintained in table MVKE - the entries
    for the sales data maintained here must match with the ones maintained in the
    filters.
    thanks & regards,
    Krishnen
    Edited by: Krishnen Subramanian on Aug 9, 2011 8:47 AM

  • Sales area data screen -BDC

    Hi All,
            I have a requirement that when i click on the kunnr field in alv report it should go to
    transaction  XD02 and should be on screen Customer sales area data..
    if i use call transaction 'XD02' and skip first screen it goes to 'Company code screen'
    and hot the sales area data screen
    so can anybody pls tell me how to achiece this means can we use BDc if yes pls provide the cdoe
    i used bdc but when i record it goes screen by screen and finaly reaches sales area data.
    if i use display all screen if i use 'N' mode it do not got to sales area screen
    but the user want to directly navigate to sales area data screen when he cick kunnr field.
    thanks

    Hi pankesh,
    while recordin in SHDB when the screen moves to sales data screen record the screen by inputting some error data and while calling the transaction through CALL TRANSACTION use processing mode as 'E' so that the the BDC will get stuck in the sales screen and the user can rectify the data and then continue.
    Regards,
    Anil N.

  • For XD01, Sales area data tab greyed out

    Hi,
    User has XD01,XD02,XD05,XD06,XD07,XD99.when user tries to use XD01 with parameters customer,sales org, dist channel and division when go to customer : sales area data screen,sales area data tab is greyed out.It shouldnot be greyed out.what is the cause of it.user has proper authorization for SD.

    Hi,
    Try with OBD2 tcode...
    Also, make sure that while creating customer, you enter sales org., dis channel, & division....
    Regards
    Edited by: SAP2020 on Jan 27, 2010 11:08 AM

  • Sales area data is missing when Customer contact replicated to CRM

    Dear Experts,
    I am facing some problem with the Customer Contact replication from isu to crm, problem is when i create a customer contact by using bct0 interaction record is replicated to the crm, when i open the interaction record in the webic i am getting the error maintain the sales area data ,i am manually maintaing the sales are data in the crm could you please tell me why sales area data is missing while replication could you tell me how to rectify this error.I am using the standard transaction type 0010.
    Thanks & Regards
    Boyz..

    Hello Shravanthi,
    Have you looked at the screen in the screen painter in ERP (transaction SE51)? Maybe this will give you a clue to what data is missing.
    Kind regards,
    Johan Wigert

  • Some Sales Orders are not replicating into CRM

    Hi guys,
    when I check SMQ2 in CRM,  I find that some sales orders are not replicating into CRM, then check the error, its says check SMW01..
    when I check the SMW01 it says validation error and BDOC status is F05 (information no processing). I tried to search the sales order in CRMD_Order transaction could not find the sales order...
    *Error in SMW01*
         Processing of document with Guid E01D11C71856C4F1AEBF0024E84DD0CE is canceled     CRM_ORDER
         Validation error occurred: Module CRM_DOWNLOAD_BTMBDOC_VAL, BDoc type BUS_TRANS_MSG.     SMW3
    It's not giving much clue what's the error is...
    I tried to setup a request to replicate those sales orders.. those request also end up in the same error...
    any help on this?
    thanks,
    Ken

    Hello Ken,
    When reprocessing a BDoc(via SMW01) you might need to set a flag.
    Goto trxn. SMW01. Start the debugger using command '/h' and reprocess the BDoc. After going into the debug mode press SHIFT+F7 and put a breakpoint at 2nd Tab in : class:cl_smw_flow and method 'restart_processing'. Keep debugging(F5 or F6 accordingly) until you find the requisite flag l_retry_allowed and set it as 'X'. This will allow you to reprocess the Bdoc.
    Thanks,
    Rohit

  • CRM BP type Sold-to-party Sales Area Data button not displayed

    Hi Gurus,
    Currently we are in the system preparation stage, but there's a problem in BP maintenance. For the BP type Sold to Party, the sales area data button is not showing up in the button bar with the General data. I only can see General data and Relationships here.
    The sales area has been maintained in the system already and can be displayed in the reference bp. Not sure any config will affect.
    Appreciate if anyone can give me a clue.
    Rgs, Michelle

    Hi,
    If you have chosen the role, and the button is not coming up following could be the possibilities:
    1. It might sound funny but it is a possibility that You might ALREADY be in the Sales Area data screens. Check if the "General Data" button is active. if it IS active then you ARE in the Sales area data.
    2. If not 1, above, then check the authorisation for the id to create BP for Sold to party and / or Sales area.
    3. Still No, then check if the screen config for creating BP is std or its a customised one wherein maybe the button has been rendered inactive. You can check by taking an existing BP who might already be a sold to part for a sales area. If this is your first case for a Sold to party then you might look at the screen config for sure.
    Do write back if you still need help.
    Regards,
    Tariq

  • Prospective Account Sales Area Data on CRM Online

    Hi Experts,
    I am using CRM2007 SP4, and i am trying to assign Sales Area Data to a Prospective Account on CRM Online. However, unlike a reqular Sold-to account (CRM000) there does not seem to be a Sales Area Data Button where the Sales Area can be maintained for a Prospective account.
    The BP Role for the Prospective account is BUP002.
    It only seems possible to maintain this through the Web Client. Is there anyway which the Sales Area can be assigned to a Prospective Account through CRM Online.
    Any assistance would be appreciated.
    Thanks,
    Jonathan

    Hi Sasha,
    I've been checking it in our system (CRM 6.0). The field Price group (cust) from ECC (KNVV-KONDA) gets standard replicated to field Price Group (Cust) on the billing tab of customer data (BP).
    No additional customizing or development is needed.
    The field is stored in: CRMM_BUT_SET0030-PRICE_GROUP
    regards,
    Wim

  • Not able to select sales area for reference BP in CRM system

    Hi All
    I am not able to select sales area data for the reference customer copied from r/3 to crm sysytem even through ORg. structure is properly maintain ( Object permitted in determination is ticked).
    The field " Choose sale area is subpress/grey.
    Please help me for the same.

    Hi Kishore,
    So you manage get into Sales Area Data, but when you
    try to select Sales Organization you get nothing?
    (click Sales Org combo but no selection appear)?
    How about field Distribution Channel and Division?
    I am afraid some of these fields still not properly
    set/transported to CRM.
    In R/3, this BP has maintained under same Sales Area
    which mapped in CRM Org Model right ?
    What is role in CRM when you open the BP?
    Have you check if there is any error in middleware
    when downloading BP data to CRM?
    Cheers,
    Gun.

  • Tables in CRM- Sales Area Data

    Hi,
    We have downloaded the Customer Master from R/3 to CRM system. Initial Load was successful and delta is also working fine. We are getting the R/3 sales area data in CRM system when we open a BP.
    But here our issue is, we could not locate the sales area data in any of these below CRM tables -
    CRMD_ORGMAN
    CRMM_BUT_FRG0081
    CRMM_BUT_FRG0080
    This data we require for BW purpose, Can anyone help me where I can get this data?
    The Bdocs coming from R/3 to CRM contains complete sales area data.
    Thanks&regards,
    kalyan

    It depends on the tab you have maintained for sales area.
    CRMM_BUT_LNK0011 holds the sales area data for the sales tab on the screen.
    CRMM_BUT_LNK0021 holds the sales area data if the shipping tab is maintained.
    Similarly if the billing tab is maintained, you ll find the data within the CRMM_BUT_LNK0031 table.
    I hope this helps.
    Regards,
    Gaurav Gera

  • Trying to add sales area data to sold to party in CRM using

    Hi all,
    i am trying to add sales area data to a sold to party business partner and i used the BAPI BAPI_BUPA_FRG0010_ADD. it executes i dont get runtime error but i get the error "invalid sales and distribution area" in return table.
    also i see that the sales area data of the sold to party is not updated after i execute my program
    can anyone tell me what i am missing
    Edited by: jessica sam on Nov 13, 2008 8:17 PM

    hey Rob i dont know if the configuration is done.but if i try to create a sold to party business partner in the screen in CRM i sales area data tab----->sales area, i find the drop down list with the values for sales organization, ditribution channel and division.
    i am able to create a sold to party in CRM and it is replicating in ECC. but if i try to display the sales area data of a sold to party that i created using the function module BAPI_BUPA_FRG0010_GETDETAIL
    it throws me an error saying invalid sales area data.
    Also i find that data is there in CRMM_BUT_LNK0021, CRMM_BUT_LNK0031 tables but not even one entry in CRMM_BUT_LNK0011
    Also i find that data is there in CRMM_BUT_SET0020, CRMM_BUT_SET0030 tables but not even one entry in CRMM_BUT_SET0010
    is some thing missing in functional configuration. the CRM guy did an intial upload from R3 and brought the sales organization to CRM.

  • Sales area data view is not visible

    Hi All,
    the salea area data view  is not visible for  all BP roles in BP master data
    please help me how can i need to put in a visible

    hi
    sales area data tab is not visible for each and every BP role,
    it is visible for sold to party,ship to party roles,
    there is aview associated with this role that is CRM 000
    if you want to have sales area data tab visible in the role like BP general you have to assign this view to your role
    but i should make you one thing very clear that sales area data tab is meant for the customer who has purchased the order and final order has been given and within this tab you have each and every info regarding the sales office,sales group etc that where the order is to be delieverd or purchased from,
    once a final order is given it can be sold to party role,ship to party role or bill payable role ,u urself tell in the role of customer how can u see the sales info if the customer hasnt purchased the order ,
    likewise the consumer role also has sales data info so sales area data tab is visible in this role too
    hope it clears all your doubt,
    in case of any doubt do revert back
    best regards
    ashish

Maybe you are looking for