Customer Sales value not decrease (FD33) after billing (VF01)

Hi,
When Billing a delivery, in FD33 the receivable are correctly increased but sales value still unchanged
normaly it should be decreased with the billed amount.
Thanks for your help.

Dear Ihsen,
If I were you I would go to [Note 425523|https://service.sap.com/sap/support/notes/425523]. These issues are usually annoying, but at the end you can always perform reorganization of credit data after update errors- report RVKRED77.
Regards,
Milen.

Similar Messages

  • Open Sales Order values not getting updated after run RVKRED77 & RVKRED88

    Hiiii,
    In Production Server. We run the reports RVKRED77 & RVKRED88. Credit info structure and and Open Sales Order values not getting updated. In FD32, Status - Sales value it showing '0". At the time of creating Sales Order Dynamic Credit check not happening coz of Tables S066 not updating. Please provide me Solution.
    Best Regards,
    Sridhar . P

    Dear Heagal,
    I followed your suggestions and implemented in the Development and moved the changes in to Quality Server. I tested it thoroughly by creating New Customer and maintained Credit Limit. I come to know that Problem is in all Servers. I made 3 changes.
    1. In Pricing Procedure Sub Total A it was not maintained against Net value. I placed it.
    2. Removed Credit groups for Delivery Type.
    3. In OVA8 i maintained Max. Doc Value :99,999,999.00 before it was with 1.00
    I checked the OMO1 Settings it was Asynchronous. As SAP Notes Suggesting to use Synchronous but here it's a client setting. So, It's Can't possible to change. Changes will affect other Company Codes.
    Tested both in DVP and QTY Dynamic Credit Check is working Perfectly and Status in FD33 Sales Value field getting update.
    If i move these changes in to Production, Will i need to run the reports again or not? How it will affect on Old Cusomer Billing and  Credit Limit data. For few of the Customers the Credit Limit data it was exceeded. Please provide me advice. The issue need to be Solved immediately.
    Best Regards,
    Sridhar

  • Credit Management Check - Sales Value not updated in FD33

    Hi,
    We have configured Credit Management checks in our system.
    When we create a Sales Order that has exceeded the Credit Amount for a Customer we get a pop up saying "Credit Limit Exceeded by XXX amount. We proceed to save the sales order.
    By my understanding this amount XXX should get get updated in Transaction FD33 - Customer Credit management Display Status in the column "Sales Value". But this does not happen. The value remains as zero.
    What could be wrong here. Should this field not be updated with the credit value that the customer has exceeded?
    Thanks and Regards,
    Ashwin

    The Sales Value in FD33 transaction is the value of open sales orders as of that point. Now in your case if you are creating the first sales order and the value of that order is going beyond the allowed credit limit then and as per setting if system is blocking that order for credit faliure in this case system does not consider this order as open untill it blocked for credit.
    Check if the order is blocked for credit. Also see the status of the order in VBUK (status table).
    Hope this helps.

  • Sales Value not updated in credit check

    Hai Guys,
    I am facing an important issue in the Credit check. The Sales value (SO / Dly made but not delivered / billed) is not reflecting in the credit check.
    1. I created a step in the pricing procedure and assigned its 'subtotal' to A (KOMP-CMPRE) - so that it can be taken for credit update.
    2. I had activated the update of LIS S066 - for Sales Order credit
    3. In the automatic credit control, I have checked the Open SO & Deliveries
    Still my credit check is not checking the open SO & Dly.
    Can somebody help me in this regard.
    Regards,
    Maheshwaran. I

    Hi
    Check whether you have entered the credit control area to that customer in XD02.
    Use the Update group 000012
      o   Sales order
          -   Increases open order value from delivery-relevant schedule lines
      o   Delivery
          -   Reduces open order value from delivery-relevant schedule lines
          -   Increases open delivery value
      o   Billing document
      Reduces open delivery value
      Increases open billing document value
    Financial accounting document
      Reduces open billing document value
    regards
    Edited by: Prashanth on Jun 10, 2009 2:52 PM

  • Sales value not updating

    Hi,
    One customer has risk category as medium and in OVA8 like as below
                                                                                    No credit check 0                   
    Deviation in %  0                       
    Item check                           X
                                                                                    Static               C        Open orders       Open deliveries        
    Dynamic      X              Horizon                0    T                 
    Document value    B    Max.doc.value     3,000,000.00           
    Critical fields      A                                                       
    NextReview date         Number of days    0                      
    Open items     A           Max.open.item %    1   NoDays openI  1    
    OldestOpenItem  >       Days oldestItem   0                      
    now my question is if i make any changes in any open sales order or partial deliverd order or being processed sales orders..
    system is not showing impact in variation of sales value or credit exposure value in FD32.
    plz advise , how to solve this issue?
    Thanks in Advance..
    Mk

    Hiii
    in Transaction OVA8, there is one option there under Released document still unchecked "Number of Days" make it 0.
    Hope it will solve your problem.
    Regards
    Shambhu Sarkar

  • COPA document not generated though after billing and accounting generations

    I have an issue with one instant.
    For some reason COPA document is not generated even though billing and accounting document were created. Found no errors in simulation using KE4ST. The billing item details has all the PA segment characteristics.
    COPA documents were created for entries made befor and after this particular one.
    Also we have COPA documents for the product with the same customer and different customers.
    Our system is 'SAP ERP Central Component 5.0'

    Thanks Ajay for the quick response.
    Cost element category is correctly maintained.
    Condition types are mapped.
    COPA is in use for more than 4 years.
    Able to simulate COPA document for the Billing document without errors.
    We do have COPA documents created before and after this particular transaction.
    As you said raising OSS message with SAP.
    Thanks

  • Sales Orgn not defined for intercompany billing

    Wehn I am creating the intercompany billing from delivery company to ordering company, I am getting the error - "Sales Organization not defined", and not allowing to process billing further, but I am finding the sales organization in delivery document.
    Any idea how to fix this?

    > check  u woul have  no mentioned  the customer number
    > in the  definition of sales  org in the field
    >      CUSTOMER INTER COMPANY BILL;...............
    > ARD  IF IT IS  HELP FUL
    >
    > KIRAN
    Greetings.
    Having the same problem leads me to the idea that this is the place where I am misunderstanding things.
    So, I will explain my settings...
    A and B are the 2 company belonging to the same group
    We have: A sales to B.
    Created Vendor_A(maintained for the purchase area appropriate for B - PA_B) and Customer_B (maintained for the sales area appropriate for A - SA_A ).
    Sales order is registered by A for the sales area SA_A for Customer_B
    Delivery is created - an interesting fact: when looking at delivery at Item details - Financial processing tab - Interco. BillSt - the space is empty and the text says "Not relevant"...
    Billing using IV invoice fails with "Sales Organization not defined"...
    And yes, in IMG->Enterprise Structure->Definition->Sales and Distribution->Define, copy, delete, check sales organization I have:
    Customer_B entered for Cust.inter-co.bill. of the sales organization B...
    Any other ideas would be welcomed...
    Best regards
    Catalin

  • Custom fields values not saved in AUFK using bapi_alm_order_maintain

    Hi ,
        We have a requirement where we have to update the custom fields in enhancement tab of IW31 using bapi_alm_order_maintain.
    We are able to get the successful creation of work order ,but the custom fields are not updated in enhancement tab aswell in aufk table. We are passing values in below table of bapi.
    EXTENSION_IN
                STRUCTURE           =  CI_AUFK
                VALUEPART1        =  '20091223' .
    Please provide the solution.

    Hi Phani,
    May be these links are helpful:
    BAPI extention to work order aiming AUFK custom field filling
    Update custom fields in MARA (BAPI_MATERIAL_SAVEDATA)
    Also search sdn using the BAPI function module, you may get some idea.
    Regards,
    Swarna Munukoti

  • PO service item - custom field value not copied to GR

    Hi All,
    I have a custom field in SC,PO and GR. For a sevice and limit items, the value in custom field in PO is not copied to GR. For goods, it is copied.
    When I debugged, I found that the system tries to match PO item internal number with that of backend item internal number. If this is matched, the custom field values are copied.
    But here it is not matched. What can be the possible reason. Is there any configuration for item internal numbers?
    I found a note 848797 for transfer. But exactly at the corrected code in note, program is failing.
    Have anyone faced this issue before?
    Thanks
    Nandalal

    Yes Disha, the notes are correctly implemented.
    I am confused on whether the internal number generated for the item is copied from some configured internal range, because when I enter two service items, the items shows backend internal numbers like 0000000010 and 0000000020 (increment by 10). But in SRM it is 0000000001 and 0000000002.
    When the code tries to match the respective numbers, it fails and skips the logic to copy custom fields.
    I dont have access to r/3 data.
    Please help.
    Have anyone tried to create a GR with service item and has custom field?
    Thanks
    Nandalal

  • Set sales order status is complete after Billing document created

    Hi experts:
    Current
    Complete rule of item category 'TAN' is space.
    The Status will be set complete after Delivery  document is created.
    I want to change the rule to
    the status will be set complete after billing document is created.
    Han can I do it ??

    Go to VOV7, select the item category and execute.  There maintain "B" against the field "Completion Rule"
    thanks
    G. Lakshmipathi

  • Pricing value not to editable in billing creation

    Hi experts,
    I have checked the posts to find how to make the Pricing not editable when creating invoice {in VF01}, but cannot find the correct post that suits my req.
    Our business req is to allow user to change it in sales order creation,though we create condition records via Vk11, still we keep it open in the Sales order creation.
    The requirement is only to grey out all values for all condition types that are copied from Sales order.
    What should be the correct Pricing Type to be used in VTFL for delivery to billing copy control.
    In V/06, for Manual entries we use C - Manual entry has priority &
    Amount/percent is selected & Value is not selected.
    Please advice.
    Rgds,
    Pri

    Hi Priya,
    I might be totally wage, in my approach, but:
    why don't you use Two different Pricing Procedure - One, in Sales Order; and Another, in Invoicing.
    Assign, both Pricing Procedure to, Sales Order and Invoicing, in T. Code: OVKK, respectively.
    Also, make a Z-Copy of Condition Type (say, ZPR0 - a copy of PR00) and maintain Condition Type (in T. Code:  V/06), i.e.
    _Untick the Box: Amount/percent, for ZPR0 in V/06, it will be greyed out in billing, whereas, mark tick at Box: Amount/percent, for PR00.
    Maintain, similar Condition records for PR00 and ZPR0, in T. Code: VK11.
    Best Regards,
    Amit

  • Custom message is not getting displayed after raising do_not_save

    Hi all,
    In Order_save BADI, based some conditions, we were throwing custom messages.
    FYI., code used,
    CV_OWN_MESSAGE = 'X'.
    MESSAGE 'xxxxxxxxxxxxxx' TYPE 'W' Raising do_not_save.
    After Solman upgrade from 7.0 to 7.1, system is not displaying custom message and
    system throwing message like "The document could not be saved" only after execution of above message statement.
    How can I overwrite this system message.
    Any help would be highly appreciated.
    -Mahi

    Hi,
    Please check the below notes
    1922870 - Raising DO_NOT_SAVE event from ORDER_SAVE BADI cause dump
    1650635 - Work Center: problems when using BAdI ORDER_SAVE
    Rg,
    Karthik

  • Customized Help does not work anymore after patch update.

    Hi,
    Our ECC system have a customized help (SAP Main Menu -> Help -> Company Help).  It stoped working after the kernel upgrade.  What do you think made it stop working.
    I tried to update also the sapgui patch to 21 but still the help would not work.
    thanks
    kbas

    .

  • OIM11gR2 DBAT User recon - custom UDF value not visible in User detail page

    Hi,
    I have configured DBAT connector for OIM11gR2 for user recon.
    Have created and mapped few custom UDFs in the GTC.
    User is created successfully in OIM, and has all the values correctly in USR table for all the custom UDFS.
    But when i search a user in OIM, i can not see the value of custom UDF, even though it is in the database.
    I have created and activated a sandbox and also added the custom UDF in the user details page using the Design option of ADF.
    Is there something I am missing related to display of custom attribute and its value on the USer details page.
    Kindly suggest.
    Regards

    Yes, your UDF should be available under Manage Users->UserVo1. It is working fine with our env. make sure you have the latest version of R2 release, because Beta release had an issue for same. You can create aonther UDF and and try gain.
    verify same with below doc
    http://docs.oracle.com/cd/E27559_01/doc.1112/e28183/oim_up.htm#BABEGECJ

  • JSF custom component: value not binding to component

    I have a custom UIInput component which is not able to bind to the value of the component from a backing bean. Here is the JSF code snippet:
    <tw:validateInputText id="locationIdStopInput" table="location" column="location" styleClass="wideSingleInput" value="#{currentStop.customer.customer}" rendered="#{loadTypeView.renderWarehouse or (currentStop.stopNumber gt 1 and loadTypeView.renderOutbound) or (currentStop.stopNumber eq 1 and loadTypeView.renderInbound)}"/>
    tw is the custom tag and validateInputText is the custom UiInput component.
    On posting the form the decode method is not able to get the value from the requestParameter map. Following is the decode() I wrote:
    public void decode(FacesContext context,
    UIComponent component) {
    // assertValidInput(context, component);
    if (context == null || component == null) {
    throw new NullPointerException();
    ValidateInputTextComponent map = (ValidateInputTextComponent) component;
    String key = map.getId();
    if (component instanceof UIInput) {
    UIInput input = (UIInput) component;
    String clientId = input
    .getClientId(context);
    Map requestMap = context
    .getExternalContext()
    .getRequestParameterMap();
    String newValue = (String) requestMap
    .get(clientId);
    if (null != newValue) {
    input.setSubmittedValue(newValue);
    Also providing the setProperties() from the custom tag class:
    protected void setProperties(UIComponent component){
    super.setProperties(component);
    if (getValue()!=null){
    if (isValueReference(getValue())){
    ValueBinding vbTarget = FacesContext.getCurrentInstance().getApplication().
    createValueBinding(getValue());
    component.setValueBinding(VB_VALUE, vbTarget);
    System.out.println(component.getValueBinding("value").getValue(FacesContext.getCurrentInstance()));
    } else{
    ((UIInput) component).setValue(value);
    // component.getAttributes().put("value",getValue());
    if (getCompValue()!=null){
    if (isValueReference(getCompValue())){
    ValueBinding vbCompTarget = FacesContext.getCurrentInstance().getApplication().
    createValueBinding(getCompValue());
    component.setValueBinding(VB_COMPONENT_VALUE, vbCompTarget);
    } else{
    // ((UIInput) component).setValue(compValue);
    component.getAttributes().put(VB_COMPONENT_VALUE,getCompValue());
    if (getTable() != null && isValueReference(getTable())){
    ValueBinding vbTable = FacesContext.getCurrentInstance().getApplication().
    createValueBinding(getTable());
    component.setValueBinding(VB_TABLE, vbTable);
    } else{
    component.getAttributes().put(VB_TABLE, getTable());
    if (getColumn() != null && isValueReference(getColumn())){
    ValueBinding vbColumn = FacesContext.getCurrentInstance().getApplication().
    createValueBinding(getColumn());
    component.setValueBinding(VB_COLUMN, vbColumn);
    } else{
    component.getAttributes().put(VB_COLUMN,getColumn());
    if (getStyleClass() != null && isValueReference(getStyleClass())){
    ValueBinding vbClass = FacesContext.getCurrentInstance().getApplication().
    createValueBinding(getStyleClass());
    component.setValueBinding(VB_STYLE_CLASS, vbClass);
    } else{
    component.getAttributes().put(VB_STYLE_CLASS, getStyleClass());
    if(getRendered() != null && isValueReference(getRendered())){
    ValueBinding vbRendered = FacesContext.getCurrentInstance().getApplication().
    createValueBinding(getRendered());
    component.setValueBinding(VB_RENDERED, vbRendered);
    } else{
    Boolean a = new Boolean(getRendered());
    component.getAttributes().put(VB_RENDERED, new Boolean(getRendered()));
    Please let me know If I am missing something here to retrieve the value from the component.
    Thanks

    See this tutorial:
    http://www.jsftutorials.net/components/index.html

Maybe you are looking for