Customer statement PLD page numbers

Experts,
I have a client who have a valid question on the page numbers on the Customer Statement Report (One page per customer) when this is run for multiple customers.
Is there a way for this to print the page numbers at the bottom starting with 1 for each customer. This numbering sequence just keeps on and this is confusing to their clients when they receive a statement starting with a page other than 1.
Thanks for your help,
Marli

Hi Jacques,
Unfortunately you can't do this in the current versions of PLD. I had the same problem with the statement layout, raised it with SAP and they confirmed that it couldn't be done.
Hopefully it will appear soon (I haven't checked the 2007 preview version yet for this).
Kind Regards,
Owen

Similar Messages

AR Customer statements report Page numbers Reset based on customer number

Hello,
In the AR Customer statements report, If I ran the report for multiple customers, page number has to be reset for each customer...
Group Started like below,
<?for-each-group:G_STATEMENT;STATEMENT_DATE?><?for-each-group:current-group();SEND_TO_ADDRESS_ID?>

Hi Kittu,
I got the answer using @section command.
Below are the complete syntax in my case.
Form field --Xml Tag
If Data Found --<?choose@section:?><?when:count(G_SETUP)!=0?>
Group G_SETUP --<?for-each@section:G_SETUP?>
Group G_STATEMENT --<?for-each-group@section:G_STATEMENT;STATEMENT_DATE?><?for-each-group@section:current-group();SEND_TO_ADDRESS_ID?>
Its working for me.
Let me know if you required more information.
Regards,
Dasarath

Customer statement PLD issue

Hi Experts,
I have a client who need to run the Customer Statements for specific dates in the posting date selection. When this is done the Prior Balance is not included in the total or the aging at the bottom. I see this is true for PLD and Crystal.
Is this just system behaviour, the prior balance only showing at the top, or should this be included in the total and aging as they are use to in other software?
Thanks for your insights,
Marli

Hi Marli,
This is the norm of B1. Your client should be able to get used to it soon.
Thanks,
Gordon

Customer Statement - PLD - Prior Period Balance

When one uses the standard Customer Statement, the prior period balance shows up. It is a field defined as TEXT field, Free Text and the text value is 9999999999.
When I copied (save as) this standard customer statement, the prior period balance no longer shows up. Further more, if I copy this field from the customer statement (F_033) to my new copy it doesn't work and if I manually create a new field it doesn't work either on the new statement.
How does one get a prior period balance to show when the field is a text field and not a formula field.
Any help would be greatly appreciated.

Hi Marli,
This is the norm of B1. Your client should be able to get used to it soon.
Thanks,
Gordon

SBO 8.8 PL09 Addrerss not printing on PLD customer statement

Hi, On SBO 8.8 PL09 we use either a standard customer statement PLD or a slightly customised layout, and the customer address does not appear on the output, although specified on the PLD iteslf.
Any ideas?
Thanks
Simon

Hi Simon,
Is address coming on system PLD? If no, than check is the address there on document itself.
Regards
Ashutosh

Customer Statement - Page Numbers

Has anyone been able to solve the page numbering problem on the statement report?
For example: If you have page numbers visible, the report runs each page 1,2,3,4 etc, where we need to have 1st customer page 1, 2nd customer page 1 and page 2, 3rd customer page 1 etc.

Hi,
In version 2005 there is no solution for this and unfortunately there is no workaround either as I know.
Regards,
Nat

Customer statement report (one page per customer) PLD

Hi All,
One of my client want to print the 5 to 6 customer aging report at a time on the pre-printed paper i had done all the work, But they want the page no for each and every customer should start from 1 and they want the current and 0-30,30-60, 60+ to be printed on the last page of the each and every customer statement.
Regards,
Srinivasarao

Hi Srinivasarao,
I am afraid to meet this need you need create your own report through reporting tool such as Crystal Report.
Thanks,
Gordon

Customer Statement Report converted from PLD to CR - extra datasource issue

Hi All,
We've come across an issue where we have used the Crystal Converter to convert a PLD layout of the Customer Statement (Collection) Report to a CR layout (done via CR 2008 using the 8.8 standard integration).
The layout converted fine and we've got most standard fields working and showing the correct values etc. However we had a requirement to also bring in the Original Document Amount into the layout (which is not a standard PLD field unfortunately!) and we had to do it via an extra datasource based on a pretty straightforward view we created in that company database - which contained columns CardCode, DocName (which was the transaction type + number e.g. IN 12345) and of course, DocTotal.
We then added the datasource (via ADO connection) and linked the DocName to the Reference field that is already present in the standard layout and contains the same data as our cutom DocTotal - and remarkably, this actually produced the correct results - i.e. we managed to get the Original Document Amount to appear in the lines of the statement together with the open invoice balance, reference, posting date, due date etc - however this seems to affect the other areas of the layout - and we lose the header and footer information completely; whilst retaining only the lines level information.
We've tried a few things such as linking the CardCode to a header field as well but it doesn't seem to bring the rest of the layout back. So in a nutshell, as soon as we bring that extra field in from the added datasource, we get the correct original document amount appearing in the lines but that's all we see in a print preview - the line level data of the statement. The header and footer information disappears.
And here is the big question - any thoughts on this and has anybody experienced a similar problem in an integrated CR? We think it may possibly be due to the extra datasource - perhaps the 8.8 - CR integration doesn't know how to handle the additional datasource AND it's own standard datasource (which is referencing the PLD fields) properly yet?
Thoughts please because I'm sure this will turn into a common issue sometime soon.
Edited by: Mohsen Qureshi on Jul 2, 2010 11:04 AM

Hi Mohsen,
Perhaps you are able to help me.
I have successfully converted the SAP system 'Customer Collection Report (One Page per Customer)' PLD into Crystal using the Crystal converter. I now run my customer ageing report in SAP, however, when i print preview the Crystal layout, the "detail" section of the report repeatedly displays the "text" label of each field. I'm assuming this is because the system PLD for the collection report, does not use database fields for the detail/repetetive area - instead it uses text fields to pull through fields such as document no etc etc.
I would have throught that a crystal conversion from an untouched system layout would have worked, but it hasn't.
My question - Did you have to perform any additional work to the crystal report after the conversion?
Any suggestions or tips on how to get the system would be greatly appreciated.
Thanks in advance,
George Kantzavelos

Calculate the day from posting day in Customer Statement Report PLD

Hi All,
I do try to copy the PLD of Customer Statement Report to make modify. I try to calculate the how many day from the posting date until today. What is the formula and operation for this calculation?
Also I found out that the posting on PLD is free text. How to get a real value from PLD? Any idea on this?

Greetings,
You can use a formula field to calculate the date diffrence between the posting date and the system / server date. But because the date value shows up with the DB specified type, you can 'chop up' the date into something more manageable, something along the lines of:
Field_XXX - (CONVERT(CHAR(8),GETDATE(),10))
where Field_XXX is your posting date field
* in my hurry to post i realised this was for the Query Manager, let me dig through my implementation folder for the right formula*
I dont quite understand your last line though:
"Also I found out that the posting on PLD is free text. How to get a real value from PLD? Any idea on this?"
Edited by: Davinder Singh on Mar 27, 2008 3:46 PM

How to preserve custom page numbers when combining PDF's?

When combining multiple PDF's into one, the custom page numbers are lost.
Example: As four separate files (one page each), the pages are numbered as follows: AC-77, AC-78, AC-79, AC-80. When combining them into a single PDF, the page numbers become 1, 2, 3, 4.
How can I preserve the original page numbers?

What is ' custom page numbers' ? How did you create the page numbers?

Customer Statements printing header page

Hi all,
Has anyone had any problems either emailing or creating a pdf for customer statements & having a selection criteria page attached? This has only happened since the latest patch.

Hi,
Which Version and patch, you working on? I am using 2005 B PL 41, its working fine.
Regards,
Abhishek
Edited by: Abhishek A on Dec 3, 2008 10:43 AM

Is there a way to create custom page numbering (ie 1, 2, 2, 3, 3, etc.)?

I have a document that needs special treatment for its page numbering. This is a two page spread that I need to have the same page number on facing pages. The page numbering would look like 1, 2, 2, 3, 3, 4, 4 and so on. I have looked through the forums and all the help documentation I can find, and the only thing remotely related is doing a print merge of two documents - but this doesn't solve my need to have the numbering scenario in the actual document. Is there a way to create a macro or script that I can add to the master pages that can calculate the correct page number? This is an Instructor's Guide that is well over 300 pages so I'm looking for some way to automate the process.

Just if I understood your need correctly... Automatic Page Number shows the number of the page, where center of its text frame lies. The actual number may be on other page. Please see attached screenshots:
and this is what you need:

Creating PDFs using Adobe Acrobat 9 Pro and can only see the first 10 pages in PDF even when the page numbers on bottom state 10 of 13 (or any number greater than 10).

PDFs create great, unless they should be over 10 pages and then it appears the data was converted to PDF by viewing the page numbers at the bottom of the PDF but you can only view the first 10 pages in the pdf file.

Hi stephaniec0103,
Could you please let me know what exact dot version of Acrobat 9 and OS you are using.
Have you tried repairing Acrobat from the Help menu?
Acrobat 9 is an older version and incompatible with new OS versions, so I would suggest you to try using Acrobat XI (latest version) and check for the same.
You may download a 30-day free trial version of Acrobat from the below mentioned link:
Download Adobe Acrobat free trial | Acrobat XI Professional
Let me know how it goes.
Regards,
Anubha

PLD - Customer Statements

Hi,
I am wanting to add the outstanding balance of each invoice/credit note to the customer statement (collection report), but I can't work out how to add this field because the repetitive area fields all seem to be free text and not getting their data from anywhere.
Is there a way to add this field?
Does anyone have a template Crystal customer statement?
Cheers,
Michael

Hi Micheal,
In Print layout designer this is not possible to make much changes to this report as most of the fields are variables and hardcoded in the layout. Moreover there is not direct link to the desired tables.
Only way via business one is to make you own report by QPLD(Query print layout designer).
Hope this helps.
Regards,
Gagan Thareja

Acrobat custom page numbers (box around page numbers)

Hi,
I need to add page numbers to multiple documents and I need each page number to have a border box around it. This is for an appendix I am putting together. Is there an easy way to do this so that all pages are numbered sequentially with an alpha prefix (i.e. A1, A2, etc.) and so that each "A" number has a black box around it. IF there is a more complicated way using java script or similar could someone be so friendly as to provide the basic script and explain how to apply it in Acrobat. Then I can adjust attributes of the script unti it looks right. I am using Acrobat Pro 9.
Any help that can be offered would be greatly appreciated!!!

The header/footer command only support text numbers so if you would like to include a graphic then you can use the Background command in conjunction with the Header/Footer command. You can create a background border box in another file that is placed around the page numbers using the Background command.

Customer statement PLD page numbers

Similar Messages

Maybe you are looking for