Customer wants to able to have his Windows VM accessable all the time.

How can I make a user's windows VM stay available all the time on their Sun Ray without it checking back into the pool?
Thanks
Jeff Holland

You missed to mention which VDI version you are using. This is important because the capabilities and terminology slightly differs between Sun VDI 2 and Sun VDI 3.
Sun VDI 3 distinguishes between *"personal"* and *"flexible"* desktop assignments.
A personal desktop is owned by the assigned user (similar to a PC under his desk) and is never made available for other users.
A flexible desktop is only temporary owned by the user and once the user logs out the desktop is recycled and becomes available for the next user.
If you select and assign a specific desktop to a user, Sun VDI 3 will automatically use a "personal" assignment here. If you assign a pool to a user, then a specific desktop is picked up from the pool and assigned to this user on demand (when the user requests a desktop for the first time). You can specify for each pool the default assignment type that should be used then - either "flexible" or "personal". At any time you can explicitly change an existing desktop assignment from flexible to personal if needed.
Sun VDI 2 uses a slightly different terminology: A *"static"* desktop is owned by a user (similar to personal in Sun VDI 3). A *"dynamic" or "temporary"* desktop is only temporary owned by the user (similar to flexible in Sun VDI 3). All desktops that are part of a pool are per default dynamic. Static desktops are not part of any pool. Sun VDI 2 does not offer to configure the default assignment type per pool. However, you can set the recycling interval for a pool to infinite meaning that the desktops will never by recycled - this simulates the personal assignment type available in Sun VDI 3.
- Klaus

Similar Messages

TS1559 I have iPhone 4s, after i updated my software to 7.0.4 my wifi stopped working. The wifi icon at the top is gone. Its annoying that i have to us my data all the time. I've tried the network reset, it didn't work.

I have iPhone 4s, after i updated my software to 7.0.4 my wifi stopped working. The wifi icon at the top is gone. Its annoying that i have to us my data all the time. I've tried the network reset, it didn't work. My phone works fine, just a lilttle bit slow before i upadated to 7.0.4. And now not only the wifi, the phone itself is slower than ever. I wish i didn't udgrade to iOs 7. There's too much problems. There's this one time that I can't send iMessage at all.

Hi s.kouris,
I'm afraid that unless you are able to contact the previous owner and have him wipe the device, or provide you with his Apple ID password so you can delete the iCloud account, you are out of luck.
With iOS 7, an Activiation Lock was added to deter thieves. This lock prevents anyone but the owner of the device from deleting the iCloud account and restoring the device:
http://support.apple.com/kb/ht5818
Unless you are able to reach the original owner and get the device wiped or the iCloud account deleted, you are stuck with a brick.
Sorry,
GB

HT1461 Win 7 set up and running OK,but after go back from OSX the wireless net work stuck at identification cause the window working without Internet.Can we fix it or I must use Windows off line all the time? I already contact Microsoft 2 times for activa

Win 7 set up and running OK,but after go back from OSX the wireless net work stuck at identification cause the window working without Internet.Can we fix it or I must use Windows off line all the time?
I already contact Microsoft 2 times for activations.Hope I can fix from Apple instead.

Ok....Got "Problem 2 and 4" solved....still trying to figure out this pop up everytime I click something...it's crazy how fast the pop up blinks...maybe once or 3 blinks then nothing till you close the window, then pop up then disappears...then click something
else and pop up then gone....never seen this before...ive seen it when you tried to get online which turned out to be a virus on a customers cpu I worked on some years ago, I think it has something to do with the deleted files that I spoke of on last
post...I notice it does it on start up as well.....think something is trying to install but not sure. Need to figure out where the appdata or start up folder and see whats in there....maybe it's in there.......so I might wait to see how it acts in the next
couple days for "Problem 1"...but other than that it's running like a champ...so right now I just want to get the pop up windows to stop........thx again for everyone's help on this.
John

HT201365 How do I change settings so I do not have to enter pass code all the time?

How do I change sttings so I do not have to enter pass code all the time?

The passcode is a key security feature to ensure that nobody has access to your device and data without you entering the passcode in. You can only have the option to have it on or off so if you wish to disable it then go to "settings>general>passcode lock" to do this.

I have to Force Quit Aperture all the time

Whenever I sit down to edit photos, Aperture hangs and I have to Force Quit and start again. This happens all the time. I used to think it happens only when I process raw images, but I've found that it happens with jpegs too. Apple once told me I should Repair Permissions and/or Repair Database and/or Rebuild Database. I did all three last night. This morning Aperture hung on the first picture I tried to crop. I am starting to get so frustrated that I am thinking I should change software because Apple doesn't seem to care about this product as I could find no support numbers to call.
Does anyone have any ideas on how to fix this?

Hi jimchall -- welcome to the Aperture user-to-user forum.
I think many people have experienced similar frustration. Determining what's causing your problems is going to take time, however.
My number one suggestion is: don't force quit Aperture. Which brings up the question, how do you know Aperture is hung up? Until your problems are sorted, it's a good idea to keep the Aperture Activity Window open -- it will keep you semi-informed about what Aperture is up to. (If you are comfortable with computers, I recommend also using iStat Menus 3, or equivalent, to monitor your memory, disk, and CPU & GPU status.)
Aperture does a lot of work in the basement (as it were) while you are busy (or not) decorating the upper floors. This is most apparent after large imports (of, for instance, an iPhoto Library), when the downstairs work can completely suspend any work being done upstairs. No notification is given to the user when this happens -- you see the spinning pinwheel, and the Force Quit utility will even report that Aperture is not responding -- but, in many many cases, Aperture is, in fact, working. Let it work. In my experience with Aperture, force-quitting almost always makes problems worse, and should be avoided.
Some of the first problem areas to rule out are from hardware. What computer are you running Aperture on? How much RAM? How big a drive? How much free space on that drive? Where is your Library located? Are you having any problems running any other software? Are you using any unusual peripherals? Is your network in any way involved in your Aperture set-up?
Then, of course, software: are Aperture and OS X completely up-dated? Have you modified the OS in any way? Has Aperture ever worked properly?
The next general trouble-shooting steps are to (temporarily) disable two of the more processor-intensive parts of Aperture. Go to the Preferences dialog, and turn off "Faces", and turn off "Share Previews". (Once Aperture is working properly for you, these can be turned back on.)
Then reboot, launch Aperture -- and let it run for several hours (keep you computer plugged in and set to not sleep). It can take many hours -- days even -- to completely process a very large import.
You have taken the steps to confirm that you Library is healthy. Stick with it, and with the help of the people on this forum you should be able to figure out what is holding you up.
Message was edited by: Kirby Krieger

HT4901 I have HughesNet with a capped amount of Internet capacity. How can I use iCloud but adjust the time it is on to conserve my Internet allowance and not have to backup my information all the time????

I have HughesNet satellite for an ISP with a capped amount of Internet capacity. How can I use iCloud but adjust the time it is on to conserve my Internet allowance and not have to back up my information all the time?

Thanks Roger W1,
Yes, I was using iTunes to sync over cable without problems since orinigal purchase in 2011 and using 10.6 w/o problem. There was an "update" in Nov 2012 that crashed the sync service. I went to the Apple Store and reviewed the problem with the Geniuses there. It was discovered at that time that the update included mandated use of iCloud but enough of the un-updated code remained that he was able to patch functions to allow Microsoft Office to still sync over iTunes.
This March (+/-) there was another "update" to 10.6 that totally destroyed the patch that was in place so there was no sync service available between Microsoft and iTunes what-so-ever. Then recently, because of some unknown process, all my notes, contacts, and calendars were erased in both my Apple utilities and Microsoft utilities.
After many hours of frustration I was able to recover most of the information to the Apple utilities only, but those were unstable. At my visit to the Apple store it was suggested that an upgrade to 10.8 might solve the stability problem. That it did but being connected to the iCloud all the time keeps using up all my Internet time and I have nothing left to check emails or do research.
This, to me, is not my problem but one created by Apple. I have searched the Internet and support groups and there doesn't seem to be a solution.
The "aircraft mode" turns off all other communication functions and is not acceptable. Neither is disconnecting/turning off Airport on my MBP.
Thanks,
Jay

SharePoint TempDB.mdf growing too large? I have to restart SQL Server all the time. Please help

Hi there,
On our DEV SharePoint farm > SQL server
The tempdb.mdf size grows too quickly and too much. I am tired of increasing the space and cannot do that anymore.
All the time I have to reboot the SQL server to get tempdb to normal size.
The Live farm is okay (with similar data) so it must be something wrong with our
DEV environment.
Any idea how to fix this please?
Thanks so much.

How do you get the tempdb to 'normal size'? How large is large and how small is normal.
Have you put the databases in simple recovery mode? It's normal for dev environments to not have the required transaction log backups to keep the ldf files in check. That won't affect the tempdb but if you've got bigger issues then that might be a symptom.
Have you turned off autogrowth for the temp DB?

I have a problem with bookmarks, all the time when I start Firefox the bookmarks is deleted, or not there. And I need to import them again and again, also the cookies, cash are deleted.

The bookmarks, cookies, history all the time are deleted when I start Firefox and I need to import them all the time.
I have version 3.6.12

This can be a problem with the file places.sqlite that stores the bookmarks and the history.
See:
* http://kb.mozillazine.org/Bookmarks_not_saved
* http://kb.mozillazine.org/Locked_or_damaged_places.sqlite

Does my library computer have to be running iTunes all the time?

I was able to get home sharing set up, but unless I keep iTunes running on the computer my library is on, the other computer can't see the shared library. Any way around this, as I really don't feel like keeping iTunes running on my machine all the time?

I'm with Limnos. In my experience, iTunes has to be running on the computer you're trying to share from. (It's okay if it's minimised, so long as it's on.)

Awesome: Windows remain present all the time after libpng update

Hi there,
After the libpng update this week, my awesome behvaes strange.
As awesome depends on cairo-xcb, I‘ve downloaded the tarball from this page, extracted it and ran makepkg -s followed by sudo pacman -U. Seemed to work, so I repeated these steps both for awesome and vicious-git and finally ran sudo pacman -Syu. During the last few days, I repeated some of theses steps (eg. I rebuilt cairo-xcb again)
So I was able to launch Awesome again, but some strange issues occured: After closing (or even killing) windows or switching tags, windows remain present. The awesome context menu behaves as these windows: It does not vanish. In fact, if I open more than one window, awesome becomes practically unuseable.
I moved my awesome config file (~/.config/awesome/rc.lua) and therefore awesome loaded the default config file, but the error occured again.
So, after googling and asking in the IRC (nice to know that most awesome guys do not have problems with this update…), I finally use the forum
Thanks for helping me out here, Keba.
PS: Obviously, the “awesome“ in the title refers to the window manager not to the awesomeness of this error.
//Edit: If I move windows, they leave some lines behind them, so awesome seems to have problems redrawing the screen correctly…
Last edited by Keba (2012-02-06 22:34:18)

anrxc wrote: Maybe you use xcompmgr?
Yes, and disabling that helps, thanks a lot
For some reason I use the non-git-version, so I built the git version and installed it. Even after rebuilding cairo-xcb again, I get the same problem again So, how to use xcompmgr?
Thanks, Keba.

Saving to SharePoint works only half the time for Windows 7 Users--all the time for Windows XP users

We have a SharePoint 2010 Environment with hardware load balancing, 2 WFEs, 2 Apps Servers and 1 SQL Server. This was built in October 2013. Office Integration and Saving back to SharePoint works all of the time for users on XP. It works sporadically for
users on Windows 7. When Windows 7 users do the following:
Opening an Office Document from computer and saving it to SharePoint
Within a Document Library, using Save As from an opened document
When selecting in a Document Library from the Document Tab> “New” and then the desired content type
Send> Save to SharePoint from within Office Document
They may either be brought to the SharePoint library (correct) or to My Documents (incorrect).
In the case of number 1 (Opening an Office Document from computer and saving it to SharePoint)--using Save and Send will sometimes open the SharePoint library and sometimes open My Documents.
Our URL is https://CompanyName.domainname.com/Sites/SiteCollectionName
The intermediary "Sites" is actually a blank path.
When My Documents is opened I've noted with Fiddler (a web debugger) that we get a 404 on sites:
Could this be the issue?

Some things to double check:
Ensure that you have sticky sessions enabled on your load balancer
Check that your WebDav calls are making it to the server
Ensure that you have a root site collection in all your web apps
Just out of curiosity, what is the http request look like for the 404 error?
Chris Givens CEO, Architecting Connected Systems
Blog Twitter

Does theAirPort Time Capsule have to be left on all the time

Do I have to leave the NEW UPRIGHT Time Capsule on and connected to the power all the time

There are two different schools of thought as far as the Time Capsule (and other Apple routers as well)
If Apple had wanted you to turn off the Time Capsule on a regular basis, they would have included an "Off" switch on the device, or a means to turn off the Time Capsule from your computer.
Clearly, Apple designed the Time Capsule is designed to be left on most of the time.
There is less stress placed on an electronic device when it is left on, as opposed to turning it off and on constantly.
Yet, it is true that turning the Time Capsule off will save a bit of energy.
Knowing that just about any decision involves trade offs, you will have to decide which school that you want to join.

On the new time capsule a/c, if you lay the device on its side does it change its signal strength in any way? Does the time capsule have to stand up-right all the time?

On the new time capsule a/c, does the time capsule have to remain up-right? Can the time capsule lay on it's side and still function?
Thanks

Please remember that the Time Capsule's antennas are up at the top of the device, and have been designed to work best in that position.
In addition, the air flow pattern to help cool the internal electronics has been designed to work best with the Time Capsule in a upright position.
When I lay the Time Capsule down for 30 minutes, it is noticeably warmer. I can't tell if wireless is affected that much since my home is not that big.
You could try laying the Time Capsule down, but my recommendation would be that you do not do this. You may get a different opinion from another user, so stay tuned.

After changing some settings I have to log in everywhere all the time!

HELP! I followed the advise of Mozilla Support and changed some (privacy) settings because I kept having trouble with Adobe Flash Player that wouldn't run.
Now I have to log in EVERY TIME on my email and other accounts, even if I've told them to 'remember me'
I want to change that back again, but don't know where and how!

To be more precise, if you are use "Clear history when Firefox closes":
*do not clear the Cookies
*do not clear the Site Preferences
*Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
*https://support.mozilla.org/kb/remove-recent-browsing-search-and-download-history
Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, passwords, and other website specific data.
Clearing cookies will remove all specified (selected) cookies including cookies with an allow exception that you would like to keep.

Since Firefox 5.0 update I get the update window popping up all the time. I keep installing the update but it just keeps happening.

I keep getting the update window even though I have installed the update.

If you want to stick with the 3.6 line, you can get the latest version here:
http://www.mozilla.com/firefox/all-older
I don't know how Macs work, but this article might help: [https://support.mozilla.com/en-US/kb/Installing%20Firefox%20on%20Mac Installing Firefox on Mac | How to | Firefox Help].

Customer wants to able to have his Windows VM accessable all the time.

Similar Messages

Maybe you are looking for