Customers-screen layout per activity/account group

Hi Gurus!
I need to set up the screen selection per activity and account group.
I need extra "display only" fields on the customer change, and in a standard way i can do it but it will affect all account groups.
Is there any workaround???
Thanks in advance, lots of points if U can help me.

Dear Friend,
This can be achieved by extra feilds feilds in the customer master data...
GO to XD02 customer change.....
Company Code :
Sales Area
General
Each Tab go to Extra --> Additional data....
This will show maintainble feilds in the master data.
This can be maintained from....
SPRO>SD>Master Data-->Bussiness Partners -->Customer -->Sales -->Maintain reserve feilds for customer master.
You can then use the same in the customer records and maintain conditions for the same.
reward points if helpful
regards,
SAP SD

Similar Messages

Screen Layout for Leasing Tab_leasing groups

Hello Gurus,
In the screen layout of the leasing tab, I have Leasing Data 1, 2 , leasing long text and capital lease method. How and from where can I change the fields that are included in the groups leasing data 1 & 2. Can I maintain the screen layout for leasing tab as per fields wise instead of field group wise.
Thanks in Advance

hello
Thanks for the reply, from the path suggested I am not able to reach to the point where i can separate / change the fields in the groups leasing data 1 / 2. Can you please tell me exactly where to go and what to do for making the fields active / inactive instead of the making the whole group of fields active / inactive.
Thanks in Advance

Error While defining screen layout in asset account

Hi Guru's,
I tried to define screen layout rules in asset accounting but it showing error "screen layout control"410"does not exist.can any body tell me whats wrong?
Thanks

Refer SAP note 1035757 or 489268

How to create the screen varient for specific Account group in FBL3N T.Code

Hi,
i am having one scenario like in T.code FBL3N Account group one selection parameter is there ,if we enter the one reconciliation Account group that user able to see the different output screen that is created by me (Customized) but not all other account group.please any one give the suggestion me.
Thanks,
Harinath.

HI ,
It looks lilke we need to use the FM like 'G_SET_LIST_SELECT' to get the Profit
Here ais note from the forums to get profit center group from table
From Table SETLEAF, Field SETCLASS = '0106'. Field SUBCLASS with controlling area. Profit center in Field VALFROM.
You will get Group name in Field SETNAME.
Regards,
Sathya

Restricting Customer Master Screen Enhancement depending on Account Group

Hello Techies,
I have added a new tab to receive an information (RDC) which will be saved in a new field of KNVV table.
This was done implementing particular interfaces of BADIs CUSTOMER_ADD_DATA and CUSTOMER_ADD_DATA_CS.
I now want this button to be visible only when a particular account group is selected during creation (XD01) or when changes are made to a customer having that particular AG.
The information about the AG stored in the KTOKD field of the table KNA1.
But I am not very sure how to restrict this button on the basis of that.
Any helpful suggestions?
P.S. Please let me know if this question requires re-categorization.

Hi Juan,
I am able to assign the content of the table GT_SCGR_ACTIVE to a field symbol. And to check the account group, I am checking the selection parameter value (SAPMF02D)S_KTOKD.
So far so good, but there is another problem. I am not able to access the 'USED' field of the table stored in the field symbol.
FIELD-SYMBOLS: <fs_xvbap> TYPE ANY.
LF_TEXT = '(SAPMF02D)GT_SCGR_ACTIVE[]'.
ASSIGN (LF_TEXT) TO <FS_XVBAP>.
IF SY-SUBRC EQ 0.
       IF '(SAPMF02D)S_KTOKD' EQ '5001' OR '(SAPMF02D)S_KTOKD' EQ '5002'.
         <FS_XVBAP>-USED = ''.
       ENDIF.
This gives error saying it is not a structure therefore no such component.
Any suggestions?

Define Account group with screen Layout (Vendor)

Hello,
Normally, for Intra-Inter company suppliers, we don't apply Withholding Tax.
In the customizing of vendor account group, for the group "Inter-Intra company suppliers", witholding Tax informations are suppressed.
The problem is i want to change that only for one company code. Because in Portugal, there is Withholding Tax applied for Intra-Inter company suppliers.
Is it possible to change Account group screen layout of that account group only for One Company code ? And how ?
Thanks
Edited by: Alexis.TN on Nov 2, 2009 6:47 PM

Hello Dianne,
There is screen layout per company code (vendor), but what i need is per company code and per account group.
This means, for a specific Account group, i need a sepcific screen layout only for a specific company code.
I think it's not possible....
Edited by: Alexis.TN on Nov 3, 2009 10:53 AM

Vendor Master Screen layout

Dear ABAP Experts,
I need to know which fields are mandatory, optional and no-input to create Vendor Master record through BDC, If anyone knows please tell me , which function module helps to get all screen fields with details based on Accounting group as Input. Tcode for Vendor Master Screen layout is OBD3.
Thanks In advance

Hi,
You can do that in:
SPRO>Financial Accounting (New)>Accounts Receivable and Accounts Payable>Vendor Accounts>Master Data> Preparations for Creating Vendor Master Data>Define Screen Layout per Activity (Vendors)>Create vendor (Purchasing)>Purchasing data
and for confirmation you can do setting under:
SPRO>Materials Management>Purchasing>Confirmations>Set Up Confirmation Control
and SPRO>Materials Management>Inventory Management and Physical Inventory>Rough Goods Receipt>Set Up Confirmation Control

Standard reports per Account groups

Dear Sap Gurus!
Please tell me if any standard reports are there to analyse customer on basis of Customer account groups linked with payment received debit credit and other fields....
thanks in advance !
Amlan Sarkar
9833301024

Dear SAP Gurus!
The Scenerio is as follows there are various account groups :
like z012,z014,z015,z016
I have to define a report to veiw the Agewise report per Customer Account group.
Not Customer Code:
Please help.
rehards,
Amlan Sarkar

Screen layout is not defined for company code ZVVV

Hi
I am creating CUSTOMER MASTER in XD01
I am getting an error like "Screen layout is not defined for company code ZVVV"
Can any one help?

hi,
this is to inform you that,
check whether
in SPRO - fin Accounting New - accounts receivable and accounts payable - customer accounts - master data - preparations for creating master data - Define Screen Layout per Company Code (Customers)
please check whether is * = Default field status.
please check and update.
balajia

Screen layout for asset class

HI,
My problem is that I am assigning one asset class to new screen layout in the asset class master data.
But the system is taking the fields from the layout which is chart of depreciation dependent data (tcode ANK1)
Here when i try to change that data for this asset class the system throws the message "Chart-of-depreciation-dependent assignment to asset class XXXX not possible"
Procedure
     In order to be able to assign chart-of-depreciation-dependent data to
     asset class 4100, the following conditions have to be met. You have to
     have already
     1. Defined at least two active charts of depreciation
     2. Assigned asset class 4100 to more than one chart of depreciation
     However, at the moment this asset class is only assigned to chart of
     depreciation 1.
Any help would really be appreciated.
Regards
Meenakshi

This is whta you have done:
Generally, the control specifications (the screen layout and the account determination) for the asset class applies throughout the client, that is, for all charts of depreciation. It is therefore sufficient to make control specifications once per asset class.
You only need to carry out this step, if, contrary to the usual case, you want these control specifications to be country-specific (that is, different depending on the chart of depreciation). The system then uses the entries you make here depending on the chart of depreciation in the given company code. The system then ignores the control specifications in the asset class that are independent of the chart of depreciation.
We shall try to check how to delete this settings.

Sales district and account group

how to create a new sales district for a customer?
and for creating a customer can i assign existing customer account groups? or should i create a new account group like sold to party X.
And how to create and assign number ranges in account groups?

Hi
To Create Sales District:
IMG - Sales and Distribution - Master Data - Business Partners - Customers - Sales
1. Define Sales Districts
No assignment required here, the details will automatically available in Customer Master Sales view screens.
Create customer account groups: OBD2
SAP Customizing Implementation Guide | Financial Accounting | Accounts Receivable and Accounts Payable | Customer Accounts | Master Records | Preparations for Creating Customer Master Records | Define Account Groups with Screen Layout
(Customers)
Creat number ranges in account groups: XDN1
SAP Customizing Implementation Guide -- Financial Accounting -- Account Receivables & Payables -- Customer Accounts
Master Data -- Create Number Ranges for Customer Accounts
Assign number ranges in account groups: OBAR
Financial Accounting -- Account Receivables & Payables -- Customer Accounts -- Master Data -- Assign Number Range to customer account groups
for creating a customer can i assign existing customer account groups?
if there is no need of creating new account group then yes u can use the same else create new one

Customer master Query report doesnt pick all the customer account groups

Hello experts
We have a custom Query report created using customer master tables KNA1,KNVV,KNB1 etc. We have customers maintained under 5 customer account groups. One of the selection fields in the query is account group. But it displays customers only in 4 of the 5 account groups for some reason, even though we have customers maintained in that group(prospective customers).
Any reason why this could occur? How do i ensure that customers from all account groups are visible?
Thanks in advance

Hai Ravi
In SAP query if you join
KNA1 - KNB1- KNVV
General - Sasles data - company data
May be your 5th Account type is created without company code data.
The query will display only if the data is linked in all tables.
In case if you don't have company code data but you want the details of the account group customer
In the query join screen.
Right click on the joining line between KNB1 and KNVV and select Left outer join.
Now run the report , it will show all the account group data.
Regards,
Mani

Reg : Customer Account Group Change

Hi Dear All,
Can any one Tell me that what effect will be there if i change the Customer account group from 0001-sol to party to EXPO-acc gr for Export customer.
As the customer is old and by mistake it has been created in 0001 instead EXPO acc group.
i need to know that what will be the effect on all sales data and accounting documents created already for that customer .
This i have to do for around 1500 records
pl suggest me the probable effects for the same.
ok thanks

Hi sunil,
You can change Account Group of a customer at any time. Its not going to effect the previous records.
But once after changing the Account group, what ever you customers you create will follow the new account group procedure.
But the thing is, if you want to process the old account group customers, must check that the corresponding fields are active / already in use or not. For example if you dont maintained one field in old account group customers and now with new account group if you want to process with that field, then you have to go the change mode and maintaine those field for all those customers which are not maintained earlier.
Like this if you can check the change in the Fields from old account group and new account group, then there wont be any problem.
Hope this gives you some idea.
REWARD IF HELPFUL.
Regards,
Praveen

Account groups and Recon Account

Dear Experts,
I use SAP R/3 4.6 C.
I've type account : Thirds Party , Affiliates and Subsidiary, and each account have Recon. Account : Thirds Party Recon Account , Affiliates Recon. Account and Subsidiary Recon Account.
I need information about Customer : Account Assignment Groups (OVK8) and Recon. account (XD03).
Are there any connection between above t-code in SD and FI ?
Thanks,
Iwan Siahaan

Hi Expert,
We need to create the Reconciliation Accounts for Customers, according to the Customer Account Groups.
If Customer is Created with the following Account Groups - Thirds Party , Affiliates and Subsidiary then we need to Create the Reconciliation Accounts - Sundry Debtors - Thirds Party Account, Sundry Debtors - Affiliates Account and Sundry Debtors - Subsidiary Account.
FI and SD Integration is done in T-Code: VKOA and in T-Code: OB40(Taxes Account Determination)
T-Code: OVK8 is just for creation of Account Assignment Groups for Customers.
Account Determination at the time of Post Goods Issue - T-Code: OBYC - GBB (Transaction) - VAX - Valuation Class (Finished Product) - COGS Account - No Cost Element (If there is no production Activity)
Regards,
GK
SAP
Edited by: GopiKrishna.Y on Feb 3, 2012 4:28 AM

All vendors under account groups..

how to find all vendors which is under account groups?is there ant transaction code to find out?

Hi,
You can find all the vendors falling under one account group through table LFA1.
In SE16 give LFA1 table and Click F7.
In the next screen give account group and click execute.
You can find all the vendors under the given vendor account group.
I suspect there is no transaction code as such to find the vendors as per vendor account group.
Regards,
Praisty

Customers-screen layout per activity/account group

Similar Messages

Maybe you are looking for