Customise in InfoPath button in the list ribbon

Hello
I am currently trying to edit a list using InfoPath in Office365, sounds simple enough but whenever I click 'Customise in InfoPath' it asks me for credentials to connect to the web service list
No matter how many times I attempt to place my username or password in the fields it will not connect, I know they are correct as I just logged onto the Office 365 suite with them. I have also
tried my normal company non Office365 credentials with no luck.
My colleague on the other hand gets a completely different box appear when he clicks the same button in the same ribbon of the same list.
I have reinstalled the entire Microsoft 2010 suite and IE9 but still get the same message and becoming a bit stuck with my next move. If anyone could help it would be greatly appreciated

Just incase anyone else ever has this issue check your proxy settings, I had uninstalled Websense Laptop Client, once reinstalled it worked as it should have done

Similar Messages

The buttons in the list are disabled

Hi Experts,
I want to create a list uibb. Have embedded the customized list in the standard form.
I have used the standard BOFU class as the feeder class /BOFU/CL_FBI_GUIBB_LIST.
Added two standard buttons FBI_CREATE and FBI_DELETE, but these both buttons are disabled.
Can you please guide me thru the same as how to enable these buttons.
Thanks.
Sanket.

Hi Sanket,
Try wiring between the standard and your custom component.
Use the FBI connector class "/BOFU/CL_FBI_CONNECTOR" in the wiring parameter.

UWL Approval/Reject buttons above the List

Hi all,
How can i place all the action buttons in UWL which appears for a particular work item above the UWL table . Presently they are present below the Description of the work item.is this can be done in XML configuration ?
Thanks
Prasad

Hi Prasad
I hope you are well and many thanks for using the SAP Discussion Forums. In relation to your query you mentioned the following:
How can i place all the action buttons in UWL which appears for a particular work item above the UWL table . Presently they are present below the Description of the work item.is this can be done in XML configuration ?
You are correct in your observation as this resolution comes down to XML configuation. I have outlined a sample below for your cross reference and convenience. The property you should be highlighting and reviewing here is "ActionPosition".
Firstly - Do you have the action defined in the view?
SAMPLE:
<Views>
<View name="com.sap.pct.erp.mss.tra.view.TripCheckView" selectionMode="SINGLESELECT" width="98%" supportedItemTypes="uwl.task.webflow.decision.TS00008267"
columnOrder="statusIcon, subject, priority, creatorId, createdDate, dueDate, processor, forwardedDate, attachmentCount, detailIcon, APPROVE,REJECT" sortby="priority:descend, dueDate:ascend, createdDate:descend"tableDesign="STANDARD" visibleRowCount="10" headerVisible="yes"queryRange="undefined" tableNavigationFooterVisible="yes"
tableNavigationType="CUSTOMNAV" refresh="300" dueDateSevere="0"dueDateWarning="0" emphasizedItems="none"displayOnlyDefinedAttributes="yes" dynamicCreationAllowed="yes"
actionPosition="bottom"referenceBundle="com.sap.pct.erp.mss.tra.TripCheck">
<Actions>
<Action reference= "<ACTION BUTTON NAME
REQUIRED>"/> </Actions>
</View></Views>
Where I have <ACTION BUTTON NAME REQUIRED> you should have something
like forward, etc.
Now a point to highlight there are two principals to remember when you are working with XML files.
Before making changes the XML files should be copied so changes can be reverted easily if required.
XML files follow the concept of precedence. So to realize changes in terms of visual display the newly edited XML file needs to be re-uploaded with a new priority of "High". After doing so clear the UWL Cache.
Kindly update me as per your findings.
Kind Regards
Troy Cronin - Enterprise Portal Support Engineer

Older versions of Firefox allowed me to click on the "back" button and see the list of pages where I had been in that tab. You took that away or you hid it. If you hid it, where did it go? If you took it away, bring it back.

Just see my original question. I think I pretty much summed it up OK there.

The arrow to open the tab history of the Back and Forward buttons has been removed in Firefox 4.
Use one of these methods to open the tab history list:
* Right click on the Back or Forward button
* Hold down the left mouse button on the enabled Back or Forward button until the list opens
You can look at this extension:
* Backward Forward History Dropdown: https://addons.mozilla.org/firefox/addon/backforedrop/

FIREFOX 26 changed the 'post crash' page with the list of windows and pages. It was a real HTML page with links for each page. Now it isn't (and blows)

* You changed the page that comes up after a crash - the one which shows the windows and pages that were up before the
crash.
This used to be a real HTML page and it isn't any more. THis choice was pure isiocy consider how peopel used that page every day (try taking to your users for a change).
The pages listed on that 'post crash page' used to be actual LINKS (you could right click them &
manually open them in another tab - and most peope DID that every day). You could also (and I did this a lot) drag a second
copy of the page, into a new tab (to keep track of all the pages I had not wanted to open)
Now the pages are no longer links. You cannot right-click them.
The thing in the probser is no longer a page that I can drag into a new tab.
Roll the version back and throw this one in the bin...and have a good long talk with your developers about the definition of
'STUPIDITIY'
Then I try to type anything in the addres bar it is suppose to repoond with the history of old things I have types in the past, or
search for what I type (and in some cases I think it tyes to convert it intoa URL). However it no longer does any of these
things. When I type in the ADDRESS BAR ONLY, I do not get all of my letters to appear. I have to type into a notepad or
into the search and to copy and paste to go to a URL. Nothing that is typed into the address bad responds normally at all
anymore, and I am fairly certain there are no new addons on this machine at all. It does not matter which things I disable. It
still does this. W of course points the finger back at a change to FIREFOX. I wich I could just sitct with one stable release
forever but the MOZILLA folk thing it is best to force peopel awy from a working broswer release to a horrible one (due to it
being out of date).
FIREFOX 26.0 has 'issues' (ie new *features*/bugs)
1) History is no longer accurate. My Proof? This machine is the primary one for the entire family (the only PC working). It is
logged in with same user every time and never has its history cleared. It now January 7 so I ought to have a list of all of last
months browing available to me.
However, according to FIREFOX history, in all of December 2013, the entire family only went to 51 primary URL's. None of
the official TV sites I use to get episodes are listed. None of the official movie sites I use are listed. The primary URL for
ebay is not listed. Only 1 out of our 4 weather sites that I use (at least once a week) are listed. Only 1 of our 3 FINANCE
sites is listed. There ought to be several; hundred root URLs listed.
Please fix history as this change seriously "blows greasy chunks"
PROBLEM (a stupid change in the new FIREFOX version)
FOr a long time, after a crash you got a useful page (a real HTML page) which gave you a list of all of your last sessions
'winwos and tabs' that were open when the browser crashed. there were certain ways of using this page that are no longer
able to be done.
The old method was wonderful as it had this behavior :
*** The old method for displaying your 'Recovered Tabs' allowed you to :
a) right click an individual item and open it in a tab without getting rid of that lovely window of your previous session of
'recovered windows and tabs '.
2) drag the URL for the entire window of 'recovered windows and tabs ' to a new tab (to make a second copy) so that you
could select just a few of them to open as a group, and stil have the old list handy.
You can no longer do either of these things. The 'recovered windows and tabs ' page no longer has links in it and can no longer be dragged, so you cant select a few of them to use, and keep the rest around for later. NOW - once you choose which pages to open the window is gone forever (can can't get a second copy).
People used to make a copy of the page for later use (with a drag)
we also used to open pages with a right click (which no longer functions
This new method seriously blows big greasy chunks. A parge loss in function has occurred.
Put things back as they were. 26 is full of terrible changes that NOBODY likes. It also has a lot of bugs (history is not reliable at all)

(1) Firefox's built-in post-crash page has not been a real HTML page for a long time (for example, from the time of Firefox 22, see: [https://support.mozilla.org/en-US/questions/968212 Want to save LOTS of versions of "Restore Session.xht" from the "oops ..." page for later use]). If you had this working differently with Firefox 25, that might have been created by an extension.
You can check to see whether extensions are disabled or need an update on the Add-ons page. Either:
* Ctrl+Shift+a
* orange Firefox button (or Tools menu) > Add-ons
In the left column, click Extensions. The disabled extensions cluster toward the bottom of the list. To poll for updates, use the "gear" button above the list and choose Check for Updates.
If you used the Reset feature (or Firefox automatically did a reset due to some problem during upgrading), you will need to reinstall missing extensions. The reset feature creates a folder on the desktop named Old Firefox Data. Do you have that folder? There may be data you can recover from it.
(2) There are many ways for history to get cleared, both internal to Firefox and external. Could you double-check your Privacy settings?
orange Firefox button (or Tools menu) > Options > Privacy
* The "Firefox will" drop-down says Remember History: Firefox shouldn't be clearing history, but an add-on or external software could do it
* The "Firefox will" drop-down says Use custom settings for history: inspect the "Clear history when Firefox closes" setting to make Firefox isn't set to clear history. Also check your add-ons and consider external software.
Firefox normally accumulates months of history. However, some of Firefox's database sizes are based on disk space available. If your hard drive is very full, Firefox might reduce the amount of history stored.

Can we add a pushbutton on the list ?

Hi,
I have to print a internal table and a push button after the list.
I can do it by SE41 but that can't be done at the end of the list. Is there any way to put pushbutton at the end of the list.
or can we write a internal table contents on the selection screen. Note that Internal table contents are not fixed and vary each time records are selected.
Thanks
Manoj

hi,
To create a pushbutton on the selection screen (similar to pushbuttons on screens), you use:
SELECTION SCREEN PUSHBUTTON [/]<pos(len)> <push>
USER-COMMAND <ucom> [MODIF ID <key>].
The [/]<pos(len)> parameters and the MODIF IF addition have the same function as for the formatting options for underlines and comments.
<push> determines the pushbutton text. For <push>, you can specify a text symbol or a field name with a maximum length of eight characters. This character field must not be declared with the DATA statement, but is generated automatically with length <len>. The field must be filled before the selection screen is called.
For <ucom>, you must specify a code of up to four characters. When the user clicks the pushbutton on the selection screen, <ucom> is entered in the UCOMM of the SSCRFIELDS interface work area. You must use the TABLES statement to declare the SSCRFIELDS structure. The contents of the SSCRFIELDS-UCOMM field can be processed during the AT SELECTION-SCREEN event.

Where has the recent pages button on the navigation bar gone?

On the V3 navigation bar we had a "go back one page" a "go forwards one page" and a "recent pages" button. The latter has disappeared in V4, which is inconvenient when I want to skip over several pages to get back to the one I wanted. Is there a way to retrieve this facility?

The back/forward buttons should still be there by default, to restore them see https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing
When you have restored them, there is a small change in functionality. The small dropdown marker next to the back/forward buttons has been removed. To get the list of sites, you can either right-clicking on the back/forward buttons, or hold down the left button until the list appears.

On the back button is the little drop down arrow completely gone, or is there a way I can I get it back. With the new Firefox I have to keep hitting back over and over again?

Is the back button drop down arrow replaced by the little arrow next to the star on the bar?
Maybe it didn't install correctly, I have Windows XP if that makes a difference. I know from the tour when the new one loaded there is supposed to be a bookmarks thing next to the new location for home but it's not on there either. It's still on my toolbar so I don't care enough to fix it so there is no need for anyone to address it, I just put the info in case it tells you something about it not installing properly.
Sorry, it's not easy for older people to keep up with all the daily website changes, adding browser changes adds to the confusion. I hope my head doesn't explode one day. Thank you for the help.

You can get the drop down list by either right-clicking on the back/forward buttons, or holding down the left button until the list appears.
If you want the drop-down arrow you can add it with the Back/forward dropmarker add-on - https://addons.mozilla.org/firefox/addon/backforward-dropmarker

Instead of hitting the "back" button on the toolbar, where is the drop down to go back 2-3 pages?

I used to be able to go back a few pages at a time until the latest upgrade. Now, if I click the "back" button on the toolbar I can only go back 1 page at a time. This doesn't always work and I have to go back to my original starting point which could be 10-15 click back ... is there anyway to get the option to go back multiple pages like before or can I just not use certain web pages anymore?
thank you!

Use this to open the tab history list:
* Right click on the Back or Forward button
* Hold down the left mouse button on the enabled Back or Forward button until the list opens
You can look at this extension:
* Backward Forward History Dropdown: https://addons.mozilla.org/firefox/addon/backforedrop/

No record of web sites by closing all tabs + there is no back button like the old version with an option of ca 10 last visited web sites...Should I reinstall the old version?

When I close all tabs firefox 4 (new version) never asks if I want firefox to save the open tabs.Is this not possible with the new version?
When I want to see the last visited webpages on a tab , there was a button (on the right side of forward button) and I coul choose one of the last visited 10 or 15 web pages.But now it has been removed.
Are two items above not possible any more?

One change in Firefox 4 is to by default stop Firefox displaying the warning message, but it can be turned back on by changing some preferences.
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''browser.tabs.warnOnClose''', if its value is set to '''false''', double-click on it to change its value to '''true'''
# Repeat this for these 3 preferences '''browser.warnOnQuit''', '''browser.warnOnRestart''' and '''browser.showQuitWarning'''
You can get the drop down list for the back/forward buttons by either right-clicking on the back/forward buttons, or holding down the left button until the list appears.

Cant hover over back button to get list of recent websites

on old version i could hover or click navigation arrows to acsess recent history

You can get the drop down list by either right-clicking on the back/forward buttons, or holding down the left button until the list appears.

Sharepoint list: ribbon - open "edit in infopath" and "edit list in sharepoint designer" didn't work

Hello,
when I try to open the infopath form (or design the list with sharepoint designer) and therefore click on the button in the ribbon, nothing happens. I can open sharepoint designer (programs) and then paste the link to the desired website, and also make changes
that way. But not open from the ribbon of the list.
Has anyone had the same troubles and know a solution? I use IE 11 and Office 365. I tested with a new list, added with the "list app". And of course I am administrator and owner of the list.
Thank you for any ideas,
Erich von Maurnböck

Hi,
I suggest you debug your code, then provide error messages for further troubleshooting.
Or you can provide your code for us to reproduce the issue.
Best Regards
Dennis Guo
TechNet Community Support

CopyListItem - creating a button in the ribbon and opening the new form with selecting item id data.

Hi,
            In Sharepoint 2013 online without visual studio, I need to create a copy button in the ribbon and by selecting a listitem and clicking the copy button. A new form has to be displayed with
the selected listitem data. Please help me in doing this scenario.
Scenario:
             Since Customer does not want to enter all the data once again. The customer will select a listitem and click the copy custom button in the ribbon, the data should be loaded in
a new form. The customer will do little modification and will click the submit button to save as a new list item.  Please help me in doing this scenario
Thanks
Logesh

Hello Logesh,
You can use SharePoint designer workflow to achieve the above requirement.
See the below link for more details.
http://www.wonderlaura.com/Lists/Posts/Post.aspx?ID=223
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

Expected value type: end-of-string infopath configuing the main submit button on the form.

Hi Everyone,
so I have run into this very odd problem. When I am trying to configure my main submit for my infopath 2010 form, and it says File Name, I put in concat(field 1, field 2, field 3), and when the form submits, I get the following as a name for my form: field
1, field 2, field 3, exactly like that. so I went back into the main submit and typed concat( and then used the function button, which brought up the list of controls to choose from, so I choose field 1, field 2, field 3 and when I hit ok, I keep getting this
error:
Expected value type: end-of-string
Actual value: ,
my:secReqMetaData/my:field 1-->,<-- my:secReqMetaData/my:field 2,my:secReqMetaData/my:field 3
does anyone have any idea why this is happening?
Best regards, Mike

Thanks for sharing the answer here, it would be helpful for others with similar issue.
Qiao Wei
TechNet Community Support

Not able to Enable the Custom Ribbon button On Pages in Sharepoint 2013

Hi Team,
Not able to Enable the Custom Ribbon button On Pages in SharePoint 2013. we have used the button edit properties section of the Pages.
Same is working for Lists but not for Pages.
Thanks,
Shrikant

Thanks for your reply.
Right now my server is not working to get the code. will share you in some time.
I am just thinking if page get checked out and my control is also present in the Edit properties section then do I need to specify something explicitly to enable the button. The same is working for Lists.

Customise in InfoPath button in the list ribbon

Similar Messages

Maybe you are looking for